Electrification

Amount

Supply and wiring points according to IS 732-1989 using rigid PVC ivory conduit of minimum size 20 mm conforming to IS 9537 part III 1983 and with suitable size specials conforming to IS 3419-1988, fixing the conduit using metal saddles spacing not exceeding 50 cm or concealed suitably and with 1.00 sq mm PVC insulated stranded single core FR copper conductor cable 650V grade,including providing switch board main ,and continuous earthing with 1.5sqmm green coloured FR wire , required qty of copper earth socket, brass bolt and nut crimping etc complete with suitable size modular type metal switch boxes, modular type front plates (white) etc. up to and including 6 A modular typeROHS compliant SP switches and making good the surface of wall, colour washing etc. complete. All the terminations in the switch boards and DB's shall be tinned and the wires shall be drawn and fixed along the periphery of the box using suitable ties, tie mounts etc as required.

Single control light point with 6A, 3 plate ceiling rose

Single control ceiling fan point with 6 A, 3 plate ceiling rose & with socket size stepped electronic regulator.

Supply, conveyance installation testing and commissioning of pre-wired light fittings made of CRCA with 0.5mm thickness complete with all accessories and lamps etc. directly on wall or ceiling with PVCround block neatly painted to suit the fitting and giving connection with required length of 16/0.20mm 3 core copper conductor flex wire conforming to relevant ISS and giving connections as required.16- 20W LED Tube fitting with polycarbonate tube, polycarbonate/Aluminium heat strink, THD<10%

Supply and installation of suitable size MS rod type fan clamp as per IS 732 as required.

Supply and installation of 1200mm sweap ceiling fan with standard accessories with out reglator including giving connection with 16/0.20 mm 3core round copper conductor flexible chord etc as required.(Crompton (High speed)/Havells(SS-390)(2 Nos point only)

Supply & Fixing the following types/ sizes of boxes suitable for modular accessories in surface/ recess including making good the damages, colour washing etc as required (ROHS)

3 module metal box in recess

8 module metal box in recess

Supply & Fixing the following types/ sizes of front plates on the existing modular boxes. (RoHS)

3 module white/ off-white

8 module white/ off-white

Supply and Fixing the following modular switches & accessories in the existing front plates and giving necessary connections as required (Group B)

6 A SP 1 way switch

16 A SP 1 way switch

6 A Universal socket

6/16 A socket

Supply and fixing the following sizes of PVC Conduit conforming to IS 9537 / 1983 part III along with all required accessories on surface including making good the damages etc as required.

20 mm dia light gauge

Supply and drawing 650/1100 V grade PVC insulated stranded single core copper conductor cables conforming to IS 694 part I 1990 in the existing surface / recess conduit as required including giving necessary connections of the following sizes.

1.50 sq mm 2 run

1.50 sq mm4 run

2.50 sq mm 2 run

4.00 sq mm 2 run

4.00 sqmm 4run

Supply and installation of sheet steel, phosphatised and painted, dust and vermin proof enclosure of MCB DB including copper /brass bus bar, neutral link, earth bus and DIN rail suitable for fixing MCB/ isolator etc. fixed on wall using suitable anchor bolts or fixed in recess including cutting hole on the wall , making good the damages, colour washing etc. as required

4 way (8+12) - three phase double cover (IP 42/43)

4 way (8+12) - double cover TPN vertical DB with provision for fixing 4P MCB / Isolator/ RCCB/ RCBO as incomer and SP/ TP MCB as outgoing (IP 42/43)

Supply and installation of the following accessories suitable for 50 Hz , AC supply conforming to IS 8828-1995/ IEC 60898 of the following current ratings in the existing enclosure and giving connections as required

40 A, 4 pole, 30 mA RCCB

6-32A 10KA, SP MCB( C curve)

40 A four pole mini break isolator

6 A to 25 A, 10 kA, TP MCB (C curve)

Supply, laying and clamping of 1 no. PVC insulated and PVC sheathed armoured aluminium power cable, 1.1 KV grade of the following sizes using clamps noted along with the cables, spacing of clamps not exceeding 60cms, making good the damages , colour washing etc. as required.

4 core 10 sq mm with factory made clamp

Supplying siemens / tropodur type nickel plated Double compression brass cable gland for PVC insulated and PVC sheathed armoured aluminium/ copper conductor cable 1.1 KV grade, and making end termination suitable for 2/ 3/ 3½/ 4 core cable of the following sizes as required.

Supplying and providing earth clamps for siemens/ tropodur type cable glands of suitable length and other dimensions noted along with each size of glands for the following sizes of cables as required.

4sqmm-16 sq mm with 12 mm wide x 1 mm thick clip

Supply of superior quality aluminium tubular cable socket and making core termination of cables of the following sizes including crimping etc. as required.

Supply and providing plate earthing as per IS 3043 with 600x600x6.30 mm GI/CI earth plate, 20 mm GI watering pipe fixed to the earth plate with 20 x 3 mm GI clamps, GI funnel with weld mesh, filling required quantity of charcoal including construction of inspection chamber with a bed concrete of 1:4:8 PCC using 40 mm broken stone (10 cm thick), brick work in cement mortar 1:6, plastering the surface of brick masonry and the exposed surface of PCC bed with cement mortar 1:4, 12 mm thick, (the finished inside dimension shall be 300 x 300 x 300 mm) but excluding test joint, earth continuity conductor to the plate, and covering at the top. (in ordinary soil)

Supply and providing test joint for the earthing system using 2 Nos of the following sizes of strips including cutting and bending to shape, drilling necessary holes and fixed to the watering pipe etc as required.

2 x 25 x 3 mm GI strip

Supply and providing earth lead from the test joint to the earth electrode using the following sizes of conductors/ strips including cutting, drilling necessary holes (in case of strip) and fixing firmly with plate test joint etc as required.

25 x 3 mm GI strip

Supply and drawing bare earthing conductors of the following sizes along with wiring/ cables and giving connection as required.

3.15 mm copper conductor (10 SWG)

2.00 mm copper conductor (14 SWG)

2.65 mm copper conductor (12 SWG)

Supply and laying bare earthing conductors of the following sizes laid 0.6 m below ground level including excavating trench of suitable size and refilling etc. as required (in ordinary soil).

3.15 mm copper conductor (10 SWG)

supply of superior quality copper earth socket for the following sizes of earth conductor including crimping etc. as required.

2.00 mm (14 SWG)

2.65 mm (12 SWG)

3.15 mm (10 SWG)

Supply and providing the following sizes of bolt and nut with washers on the existing MS box / earth bus etc. as required including drilling necessary holes as required

12 x 3 mm brass bolt & nut

25 x 6 mm brass bolt & nut

Fabrication, supply & installation of dust and vermin proof, wall mounting, thermoplastic meter box of folowing size suitable for fixing KSEB meter,fuse units, CT etc, hinged door construction for the front side with compartments if necessary, providing vision panel for the meter compartment, knock out for cable entry and exit.

Supply and fixing the following accessories in the existing meter board and giving connections etc.

32 A fuse holder for BS type blade fuses.

2 -80A, DIN type fuse link of size 000

32 A, 415 V, 2 way neutral link mounted on DMC/ SMC base.

Supply and Providing anchor Bolt type Hook for Service Main

supply, of 3 star rated 1 phase 2 TR High wall split type air conditioner fitted with Rotory Compressor having Cooling capacity Nominal ( kacl/hr):5800, Cooling cap( min) Guaranteed ( kcal/hr):5500, Min. Room Discharge air flow (cub m/hr) 800, EER (W/W): 3.1 complete with all accessories with Microprocessor based control & remote control.(Make: LG/Voltas/Blue star/Carrier make )

Supply of 5 KVA voltage stabiliser for split type A/C unit with voltage range of 175-275V and out put range of 210 - 240V.

Supply and providing frame for the outdoor unit of the above AC unit as required

Supply and providing 32 mm/neasst size pvc pipe complete with standars acessories as drain pipe etc as required

Supply and fixing the following accessories in the existing meter board and giving connections etc.

3 Core 4 sq mm

Xavier Joseph