Delhi

Active

Services

Miscellaneous Services

Maintenance and Operation of street light under PWD EMD South East, New Delhi during. 2026-27.

Public Works Department

At Site | New Delhi, Delhi

Amount: ₹97.5 LCloses: 3 Oct 20266d left

Timeline

Published26 Sept 2026
Closes3 Oct 2026
Bid Opening3 Oct 2026

Tender Value

₹97.5 L

EMD Value

₹2.0 L

Closing Date

3 Oct 2026, 3:00 pm6d left

Tender Inviting Organisation

Name

The Executive Engineer (E)

Address

The Executive Engineer (E), EMD South East, PWD, Thyagraj Sports Complex, New Delhi-110003

Work Description

(SH- SITC of Poles with LED fittings Near Jasola and Sarita Vihar Area under Sub Division EMSD-III, Sunlight Colony, New Delhi.)

Tender Information

Tender ID

2026_PWD_299056_1

Reference Number

119/EE(E)/EMD South East/PWD/2026-27

Tender Type

Open Tender

Product Category

Miscellaneous Services

Form of Contract

Works

Period of Work

180 days

Location

At Site

Source Website

Subscribe to view

Eligibility / Pre-Qualification

Please refer Tender documents.

Documents Required

14 documents required · 14 mandatory

Fee/PreQual/Technical

RequiredEMD as per NIT (.pdf)

RequiredCopy of Receipt for Deposition of Original EMD as per NIT (.pdf)

RequiredCopy of Valid Electrical License as per NIT (.pdf)

RequiredCopy of Certificate of Registration for GST as per NIT (.pdf)

RequiredCopy of Valid PAN Card as per NIT (.pdf)

RequiredCopy of Affidavit on Non Judicial Stamp Paper of Rs. 100 regarding debarment as per NIT (.pdf)

RequiredCopy of Enlistment order of Contractor as per NIT (.pdf)

RequiredCertificate of Work Experience as per NIT (.pdf)

RequiredScan Copy of Letter of Transmittal as per NIT (.pdf)

RequiredCopy of Financial Turnover Statement as per NIT (.pdf)

RequiredCopy of Loss and Profit statement as per NIT (.pdf)

RequiredCopy of Solvency or Networth Certificate as per NIT (.pdf)

RequiredCopy of Affidavit on Non Judicial Stamp Paper of Rs. 100 as per NIT (.pdf)

Finance

RequiredBOQ (.xls)

Fee & Financial Details

Tender Fee Amount

₹0

EMD Fee Amount

₹2.0 L

Important Dates

Last Activity

26 Sept 2026

Published

26 Sept 2026

Bid Opening

3 Oct 2026

Download Starts

26 Sept 2026

Download Ends

3 Oct 2026

Submission Starts

26 Sept 2026

Bill of Quantities

PercentageBoQ_Ver4.0INR

This is a percentage-rate BOQ. The schedule below shows estimated quantities and rates. Bidders quote a single percentage above or below the total estimated cost.

BoQ1 (23 items)

Sl No	Description	Qty	Unit	Est. Rate	Est. Amount
1	Supplying & erection of flange mounted hot dip galvanized octagonal poles of 8 mtrs. height made from 4 mm thick HT steel plate having bottom dia of 150 mm & top dia of 70mm complete with window with flash cover at a height of 0.5 mtrs from the base for cable termination block etc. and galvanized base plate of size 240 mm x 240 mm x 16 mm thick on the existing cement concrete pedestal as required i/c supplying and fixing of the following in the window box provided for cable termination : a) Supply & fixing 6 mm thick laminated mounted sheet inside the window mounted on and i/c providing and welding 3 Nos. GI strip 4 mm thick of suitable length and having suitable size tapped holes - 10 Nos as reqd. b) Supply and fixing 63 amps. terminal block suitable for 25 sq. mm conductor- 4 Nos. & shorting links - 5 Nos. on DIN channel i/c pdg. and fixing DIN channel of suitable length - 1 Nos. on the existing laminated sheet. c) Supply & fixing of 6 amp. SP MCB 'C' characteristics Curve - 1 Nos, earth stud - 1 Nos, welded at suitable height two nos washers, springs washers & nuts. d) Cable support clamp sutiable for 4 Nos. of 4 x 16 sqmm cable.	120	Nos.	15,679	₹18,81,480
2	Supplying & erection of flange mounted hot dip galvanized octagonal poles of 10 mtrs. height made from 4 mm thick HT steel plate having bottom dia of 200 mm & top dia of 100mm complete with window with flash cover at a height of 0.5 mtrs from the base for cable termination block etc. and galvanized base plate of size 320 mm x 320 mm x 20 mm thick on the existing cement concrete pedestal as required i/c supplying and fixing of the following in the window box provided for cable termination : a) Supply & fixing 6 mm thick laminated mounted sheet inside the window mounted on and i/c providing and welding 3 Nos. GI strip 4 mm thick of suitable length and having suitable size tapped holes - 10 Nos as reqd. b) Supply and fixing 63 amps. terminal block suitable for 25 sq. mm conductor- 4 Nos. & shorting links - 5 Nos. on DIN channel i/c pdg. and fixing DIN channel of suitable length - 1 Nos. on the existing laminated sheet. c) Supply & fixing of 6 amp. SP MCB 'C' characteristics Curve - 1 Nos, earth stud - 1 Nos, welded at suitable height two nos washers, springs washers & nuts. d) Cable support clamp sutiable for 4 Nos. of 4 x 16 sqmm cable.	25	Nos.	27,795	₹6,94,875
3	Fabrication, supplying & fixing of Double arm galvanized iron bracket of 1mtr long arm of suitable dia on the existing pole with tightening bolts etc. as reqd. (As per approved Drawing.)	800	Kgs.	125	₹1,00,000
4	Providing and laying in position 1:2:4 reinforced cement concrete foundation of size 650mm (L) X 650mm wide and 1400mm deep i/c excavation of earth, providing , cutting, bending and placing in position, reinforcement of cold twisted bars of 12mm dia - 1400mm long (approx)-10 Nos. and reinforcement ring of cold twisted bar of 8mm dia - 1600mm (approx) - 10 nos. (with 150mm spacing) as required with positioning of foundation bolts (as per item below) as shown in the item below and providing 75 mm. (O.D.) DWC, HDPE pipe for cable entry & exit as required.	145	Nos	5,547	₹8,04,315
5Supplying, installation, Testing & Commissioning of Street light LED fixture powder coated pressure die cast aluminium body with driver as per the requirement with Driver efficiency >85%, Input voltage: 140-270 Volt AC, frequency 50/60 hz, Operating temp range -5 0C to 50 0C, internal surge protection of 5 KV L,N,E as per IEC 61000-4-5, Driver efficiency >85%,THD < 10% as per IEC 61000-3-2, P. F.≥0.95, IP-66,IK-10, CRI >70, under voltage and over voltage protection, EMIEMC As per CISPR -15, lenses for beam angle as per IESNA type I/II/III as per the width of the road and the project requirement., suitable to fit in up to 65mm dia pipe, life time (LED, Driver & electrical circuitry) of minimum 50000 Burning Hours with 70% of initial Lumen maintained till life ends as per LM80 extrapolation IES TM-21-11 report, CCT 3000°K / 4000°K / 5700°K /6500°K (As per ANSI Bin),SDCM (Standard Deviation Colour Matching) <5, Maximum power consumption should not more than the specified rating and Fixture shall be of relevant BIS standard complete in all respect i/c external connections with 1.5 sq.mm FRLS/HFFR, PVC insulated copper conductor single core cable and earthing etc. as required with Minimum 5 year OEM warranty. System lumen efficacy ≥105 <120 lm/Watt output .LM79 & LM80 Test report and all testing required for LED fixtures as per BIS shall be submitted. Shape size and CCT shall be as approved by Engineer-in-Charge as per requirement. (Thermal management: heat sink of aluminium housing such that LED junction temperature shall not rise above 90°C).
5.01	120W	170	Nos.	2,612	₹4,44,040
6Supplying and laying of following size DWC HDPE pipe ISI marked along with all accessories like socket, bend, couplers etc. conforming to IS 14930, Part II complete with fitting and cutting, jointing etc..direct in ground (75 cm below ground level) including excavation and refilling the trench but excluding sand cushioning and protective covering etc., complete as required.
6.01	a) 63 mm dia (OD-63 mm & ID-51 mm nominal)	3,500	Mtrs	289	₹10,11,500
7Providing, laying, testing & commissioning of 'B' class medium duty G.I. pipe conforming to IS 1239 including welding, fittings like elbows, tees, flanges, tapers, nuts, bolts, gaskets etc. and fixing the pipe on the wall/ceiling with suitable clamp/support frame and painting with two or more coats of synthetic enamel paint of required shade complete as required :
7.01	a) 50 mm	100	Mtrs	1,066	₹1,06,600

Documents

Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.

Tender Page Snapshot

details.html

html • 0.03 MB

NIT Documents

Tendernotice_1.pdf

PDF • 0.85 MB

Work Item Documents

tender.pdf

Tender Documents • 2.93 MB

BOQ_399038.xls

BOQ • 0.41 MB

Ready to Participate?

Download all tender documents and submit your bid

Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .

Loading…

Sl No

Description

Qty

Unit

Est. Rate

Est. Amount

Supplying & erection of flange mounted hot dip galvanized octagonal poles of 8 mtrs. height made from 4 mm thick HT steel plate having bottom dia of 150 mm & top dia of 70mm complete with window with flash cover at a height of 0.5 mtrs from the base for cable termination block etc. and galvanized base plate of size 240 mm x 240 mm x 16 mm thick on the existing cement concrete pedestal as required i/c supplying and fixing of the following in the window box provided for cable termination : a) Supply & fixing 6 mm thick laminated mounted sheet inside the window mounted on and i/c providing and welding 3 Nos. GI strip 4 mm thick of suitable length and having suitable size tapped holes - 10 Nos as reqd. b) Supply and fixing 63 amps. terminal block suitable for 25 sq. mm conductor- 4 Nos. & shorting links - 5 Nos. on DIN channel i/c pdg. and fixing DIN channel of suitable length - 1 Nos. on the existing laminated sheet. c) Supply & fixing of 6 amp. SP MCB 'C' characteristics Curve - 1 Nos, earth stud - 1 Nos, welded at suitable height two nos washers, springs washers & nuts. d) Cable support clamp sutiable for 4 Nos. of 4 x 16 sqmm cable.

120

Nos.

15,679

₹18,81,480

Supplying & erection of flange mounted hot dip galvanized octagonal poles of 10 mtrs. height made from 4 mm thick HT steel plate having bottom dia of 200 mm & top dia of 100mm complete with window with flash cover at a height of 0.5 mtrs from the base for cable termination block etc. and galvanized base plate of size 320 mm x 320 mm x 20 mm thick on the existing cement concrete pedestal as required i/c supplying and fixing of the following in the window box provided for cable termination : a) Supply & fixing 6 mm thick laminated mounted sheet inside the window mounted on and i/c providing and welding 3 Nos. GI strip 4 mm thick of suitable length and having suitable size tapped holes - 10 Nos as reqd. b) Supply and fixing 63 amps. terminal block suitable for 25 sq. mm conductor- 4 Nos. & shorting links - 5 Nos. on DIN channel i/c pdg. and fixing DIN channel of suitable length - 1 Nos. on the existing laminated sheet. c) Supply & fixing of 6 amp. SP MCB 'C' characteristics Curve - 1 Nos, earth stud - 1 Nos, welded at suitable height two nos washers, springs washers & nuts. d) Cable support clamp sutiable for 4 Nos. of 4 x 16 sqmm cable.

Nos.

27,795

₹6,94,875

Fabrication, supplying & fixing of Double arm galvanized iron bracket of 1mtr long arm of suitable dia on the existing pole with tightening bolts etc. as reqd. (As per approved Drawing.)

800

Kgs.

125

₹1,00,000

Providing and laying in position 1:2:4 reinforced cement concrete foundation of size 650mm (L) X 650mm wide and 1400mm deep i/c excavation of earth, providing , cutting, bending and placing in position, reinforcement of cold twisted bars of 12mm dia - 1400mm long (approx)-10 Nos. and reinforcement ring of cold twisted bar of 8mm dia - 1600mm (approx) - 10 nos. (with 150mm spacing) as required with positioning of foundation bolts (as per item below) as shown in the item below and providing 75 mm. (O.D.) DWC, HDPE pipe for cable entry & exit as required.

145

Nos

5,547

₹8,04,315

5Supplying, installation, Testing & Commissioning of Street light LED fixture powder coated pressure die cast aluminium body with driver as per the requirement with Driver efficiency >85%, Input voltage: 140-270 Volt AC, frequency 50/60 hz, Operating temp range -5 0C to 50 0C, internal surge protection of 5 KV L,N,E as per IEC 61000-4-5, Driver efficiency >85%,THD < 10% as per IEC 61000-3-2, P. F.≥0.95, IP-66,IK-10, CRI >70, under voltage and over voltage protection, EMIEMC As per CISPR -15, lenses for beam angle as per IESNA type I/II/III as per the width of the road and the project requirement., suitable to fit in up to 65mm dia pipe, life time (LED, Driver & electrical circuitry) of minimum 50000 Burning Hours with 70% of initial Lumen maintained till life ends as per LM80 extrapolation IES TM-21-11 report, CCT 3000°K / 4000°K / 5700°K /6500°K (As per ANSI Bin),SDCM (Standard Deviation Colour Matching) <5, Maximum power consumption should not more than the specified rating and Fixture shall be of relevant BIS standard complete in all respect i/c external connections with 1.5 sq.mm FRLS/HFFR, PVC insulated copper conductor single core cable and earthing etc. as required with Minimum 5 year OEM warranty. System lumen efficacy ≥105 <120 lm/Watt output .LM79 & LM80 Test report and all testing required for LED fixtures as per BIS shall be submitted. Shape size and CCT shall be as approved by Engineer-in-Charge as per requirement. (Thermal management: heat sink of aluminium housing such that LED junction temperature shall not rise above 90°C).

5.01

120W

170

Nos.

2,612

₹4,44,040

6Supplying and laying of following size DWC HDPE pipe ISI marked along with all accessories like socket, bend, couplers etc. conforming to IS 14930, Part II complete with fitting and cutting, jointing etc..direct in ground (75 cm below ground level) including excavation and refilling the trench but excluding sand cushioning and protective covering etc., complete as required.

6.01

a) 63 mm dia (OD-63 mm & ID-51 mm nominal)

3,500

Mtrs

289

₹10,11,500

7Providing, laying, testing & commissioning of 'B' class medium duty G.I. pipe conforming to IS 1239 including welding, fittings like elbows, tees, flanges, tapers, nuts, bolts, gaskets etc. and fixing the pipe on the wall/ceiling with suitable clamp/support frame and painting with two or more coats of synthetic enamel paint of required shade complete as required :

7.01

a) 50 mm

100

Mtrs

1,066

₹1,06,600