Loading
Loading…
New: tenders and results on WhatsApp
New: Find tenders, results and companies on WhatsApp, by text or voice note
New: tenders and results on WhatsApp
New: Find tenders, results and companies on WhatsApp, by text or voice note
Loading…
Tender ID
Eligibility, documents, scope, Go/No-Go checksEligibility, required documents, scope of work and Go/No-Go checks for this tender, in one click.
Tender Value
₹3.6 L
EMD Value
₹7,172
Closing Date
20 Nov 2026, 11:00 am
Eligibility, documents, scope, Go/No-Go checksEligibility, required documents, scope of work and Go/No-Go checks for this tender, in one click.
Executive Engineer
Executive Engineer Jal Shakti Division Fatehpur
Providing and Installation of Hand pump India mark-III (65 mm dia) India mark-II (32 mm dia) at Sub Division Fatehpur in Tehsil Fatehpur Distt. Kangra HP (SH-Drilling by handpump with DTH/ ODEX/ Percussion/ Calyx/ portable rigs
2026_HPIPH_147684_1
NIT No. EE-JSD-FTR-EA-I-6402-40 dated 10-11-2026
Open Tender
Civil Works
Item Rate
Tehsil Fatehpur
As per notice inviting tender
11 documents required · 11 mandatory
₹350
EE Fatehpur
₹7,172
10 Nov 2026
10 Nov 2026
20 Nov 2026
10 Nov 2026
20 Nov 2026
10 Nov 2026
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1 | Providing and installation of India Mark III(65mm) and India mark II(32mm) extra deep (32mm) deep bore hand pumps as per IS 13056-1991 alongwith its upto date amendments and IS:9301 respectively comprising of following items, transporation of suitable Truck /Tractor mounted rig where road available or with Portable rig where road availabe or with Portable rig where road not available with DTH/ODEX/Percussion/Calyx/Rotary method alongwith necessary accessories etc. to the site of work and erection including leveling of site etc. complete in all respect as per the direction of Engineer in Charge. | 1 | Each | - | - |
| 2 | Drilling bores of 152mm dia as per IS : 2800-1979 using ODEX (TUBEX) attachment required drilling in collapsible strata conglomerate boulders pebbles gravels silt clay etc including cost of attachments consumables stores bits water POL etc complete with system of simultaneous lowering of 125mm nominal bore 5mm thick MSERW fincut casing pipe which will be welded together using 2.5mm or 3.25mm dia advani/oerlikon electrodes with one plain end the other end chamfered to 50 degree removing paint on the area to be welded inclusive of the cost of biodegradable and non toxic from flush etc complete in all respects as per directions of the Engineer in Charge MSERW fincut casing pipe ,casing pipe shoe and bit tube as per requirement of ODEX to be paid seprately. | 80 | P/Rmt. | - | - |
| 3 | Supplying and lowering of IS marked 125mm nominal bore 5mm thick fincut MSERW casing pipes as per IS 4270-2001 and requirement of ODEX attachment from approved manufactures complete in all respects as per the directions of the Engineer in Charge . | 80 | P/Rmt. | - | - |
| 4 | Providing and fixing suitable casing shoe and bit tube as per requirement of ODEX attachment complete in all respects as per directions of Engineer in Charge . | 1 | Nos | - | - |
| 5 | Collection and preservation of soil samples in polythene bags complete in all respects as per directions of Engineer in Charge . | 1 | Nos | - | - |
| 6 | Development of bore well and yield testing with air compressor through V-Notch and disinfection etc complete in all respects as per IS 2800-1979 and as per directions of Engineer in Charge . | 1 | Nos | - | - |
| 7Supply of submersible pumping sets of KSB make conforming to latest relevant BIS .The pump should be fitted with free flow impellors alloy as per BIS -5659 -1978 with uptodate for clear water with shaft protection sleeve on pump shaft ensuring better efficiency conforming to BIS specification. The pump shall be directly coupled by intermediate casing and provided with stainless steel thrust bearing plant to withstand non vertical loads with minimum wear and tear .It is also should be fitted with a rubber device to make up expensing of water with heating of motor complete in all respect as per the direction and satisfactions of the Engineer in charge. | |||||
| 7.01 | 2.00 HP Single phase | 1 | P/Set | - | - |
| 7.02 | Discharge -1.50 LPS | - | - | - | - |
| 7.03 | Total Head = 90.00 to 110.00 mtr. | - | - | - | - |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Tendernotice_1.pdf
PDF • 0.26 MB
BOQ_220642.xls
BOQ • 0.29 MB
form6.pdf
Tender Documents • 0.11 MB
form8.pdf
Tender Documents • 1.46 MB
reteofwagesform8.pdf
Tender Documents • 0.16 MB
tc.pdf
Tender Documents • 0.39 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .