PROVN OF GENERATOR SET, EXTERNAL ELECT SUPPLY, UG CABLE AND PIPE LINE CONNECTION AT MISSAMARI UNDER GE MISSAMARI

Amount

Excavation in trenches not exc 1.5 mtr width and not exc 1.5 mtr in depth and getting out in soft / loose soil for laying /taking out of LT UG cable complete all as specified and directed.

Returning, filling in incl spreading, leveling , watering and well ramming in layers not exc 25 cm thick in soils.

Removal of surplus soil to a distance not exc 50 mtr away and depositing where directed as a level not exc 1.5 mtr above the starting point.

Supply and laying well burnt Bricks , locally available best quality (sub class "B" bricks) laid in trenches perpandicular to U/G cable for cable protection complete all as specified.

Supply , spread and filling approved sand in cable trenches for cushioning of LT UG cable all as specified. NOTE :- Punned thickness only will be measured and paid.

M&L Cement Concrete 1:4:8 (40mm graded aggregate) as Lean Concrete in Foundation of Poles, Stay Assembly, etc., including Form-work (as/if required), complete all as specified and as directed.

M&L Cement Concrete 1:3:6 (40mm graded aggregate) as in Foundation of Poles, Stays, etc. including Formwork (as/if required) complete all as specified and as directed.

M&L Cement Concrete 1:2:4 (20mm graded aggregate) as in Coping of Poles, etc. and finishing the Concrete surfaces Fair and Even including necessary Formwork required at Site(s), complete all as specified and as directed.

Supplying, installing, commissioning and testing complete of manufacturer of OEM (Original Eqpt Manufacturer) manufactured and tested static Silent Diesel Engine Driven Generating Set including standard AMF panel capable of delivering 40 KVA, 415 volts (AC 3 Phase, 4 wire system of supply) 50 Hz at power factor 0.8 minimum. The DG set shall consist of a diesel engine coupled through flexible coupling to a matching alternator and mounted on Dunlop metalastik foundation pads on a common base frame and threafter installed in the CPCB approved acoustic enclosure (the complete set conforming to and test certified as per CPCB norms and as specified) all as specified complete with control panel standardised by manufacturer, flexible exhaust pipe complete including PCC foundation of suitable size as per manufacturer reccomendation Make:- KOEL/ASHOK LEYLAND/SUDHIR/ CUMMINS and shall comprise of the followings :- (a) ENGINE (PRIME MOVER). Diesel Engine 1500 RPM of suitbale HP as recommended by manufacturer but not less than 56 BHP (at NTP) water cooled, Turbocharged aircooled, 1x 150 AH 12 Volts electric battery start, complete with fly wheel and all standard fittings/fixtures as per manufacturing practice including suitable engine control panel with tachometer, lube oil temp & pressure gauge, water temp guage and frequency meter (digital type) including safety shutdown contents) and also including self starter, dynamo, fuel tank etc and conforming to I.S. 10002, ISO 3046, BS-5514. The engine shall give electrical out put of 40 KVA at 0.8 PF. (b) ALTERNATOR. AC alternator, self excited, self regulated, self ventilated, brushless design, conforming to BS 2613/IS 4722, 3 Phase, 415 volts, 50 Hz, 4 wire system output 40 KVA PF 0.8 1500 RPM insulation class `H' enclosure IP 23/TEFC complete with AVR with + 1% voltage regulation directly coupled to and match the above engine and capable for over load of 10% for one hr in 12 hr operation. (c) Dunlop Metalastik anti-vibration pads for mounting engine - alternator assembly on the base frame/plate.

(d) BASE FRAME. Made out of structural steel as per Manufacturer's recommended design/specefications. (e) ACCOUSTIC ENCLOSURE. Provn of an integral type approved/certified acoustic enclosure as per CPCB norms for the DG sets restricted the noise level to 75 db at one meter along and temp rise within canopy shall not exceed 5° to 7° Celsius. It shall be made of 16 SWG CRCA MS sheet with powder coated finish on outside and provided with non igniting fire retardant foam as accustic material. There shall be four hinged doors out of which one shall be with a glass window. The base frame shall be ISM section. It shall also include the followings:- (i) Silence absorption type, non-resistance, residential and exhaust pipe covered with asbestos rope lagging extending to about 2 mtrs outside the accoustic enclosures. (ii) Internal wiring with PVC copper conductor cables, IS 694 marked, FRLS in conduit and flourescent lamp fittings. (f) Battery 1 Nos 12 V x 150 AH DC charged/sealed maint free of suitable cap all inclusive of engine/alternator protective foundation with LCD display. Make : EXIDE/AMCO (g) Control Panel (h) Foundation of DG set shall be as per Manufacturer's Recommendation . (i) Inbuilt AMF panel as per manufacturer specifications. (j) CATALOGUES. Operation and Maintenance manual, spare parts list, overhauling manual - 03 Sets Note :- All outgoing feeders cables shall be connected through suitable size gland palte/glands.

Supplying, installing, commissioning and testing complete of manufacturer of OEM (Original Eqpt Manufacturer) manufactured and tested static Silent Diesel Engine Driven Generating Set including standard AMF panel capable of delivering 30 KVA, 415 volts (AC 3 Phase, 4 wire system of supply) 50 Hz at power factor 0.8 minimum. The DG set shall consist of a diesel engine coupled through flexible coupling to a matching alternator and mounted on Dunlop metalastik foundation pads on a common base frame and threafter installed in the CPCB approved acoustic enclosure (the complete set conforming to and test certified as per CPCB norms and as specified) all as specified complete with control panel standardised by manufacturer, flexible exhaust pipe complete including PCC foundation of suitable size as per manufacturer reccomendation Make:- KOEL/ASHOK LEYLAND/SUDHIR/ CUMMINS and shall comprise of the followings :- (a) ENGINE (PRIME MOVER). Diesel Engine 1500 RPM of suitbale HP as recommended by manufacturer but not less than 42 BHP (at NTP) water cooled, Turbocharged aircooled, 1x 100 AH 12 Volts electric battery start, complete with fly wheel and all standard fittings/fixtures as per manufacturing practice including suitable engine control panel with tachometer, lube oil temp & pressure gauge, water temp guage and frequency meter (digital type) including safety shutdown contents) and also including self starter, dynamo, fuel tank etc and conforming to I.S. 10002, ISO 3046, BS-5514. The engine shall give electrical out put of 30 KVA at 0.8 PF. (b) ALTERNATOR. AC alternator, self excited, self regulated, self ventilated, brushless design, conforming to BS 2613/IS 4722, 3 Phase, 415 volts, 50 Hz, 4 wire system output 30 KVA PF 0.8 1500 RPM insulation class `H' enclosure IP 23/TEFC complete with AVR with + 1% voltage regulation directly coupled to and match the above engine and capable for over load of 10% for one hr in 12 hr operation. (c) Dunlop Metalastik anti-vibration pads for mounting engine - alternator assembly on the base frame/plate.

(d) BASE FRAME. Made out of structural steel as per Manufacturer's recommended design/specefications. (e) ACCOUSTIC ENCLOSURE. Provn of an integral type approved/certified acoustic enclosure as per CPCB norms for the DG sets restricted the noise level to 75 db at one meter along and temp rise within canopy shall not exceed 5° to 7° Celsius. It shall be made of 16 SWG CRCA MS sheet with powder coated finish on outside and provided with non igniting fire retardant foam as accustic material. There shall be four hinged doors out of which one shall be with a glass window. The base frame shall be ISM section. It shall also include the followings:- (i) Silence absorption type, non-resistance, residential and exhaust pipe covered with asbestos rope lagging extending to about 2 mtrs outside the accoustic enclosures. (ii) Internal wiring with PVC copper conductor cables, IS 694 marked, FRLS in conduit and flourescent lamp fittings. (f) Battery 1 Nos 12 V x 100 AH DC charged/sealed maint free of suitable cap all inclusive of engine/alternator protective foundation with LCD display. Make : EXIDE/AMCO (g) Control Panel (h) Foundation of DG set shall be as per Manufacturer's Recommendation . (i) Inbuilt AMF panel as per manufacturer specifications. (j) CATALOGUES. Operation and Maintenance manual, spare parts list, overhauling manual - 03 Sets Note :- All outgoing feeders cables shall be connected through suitable size gland palte/glands.

M&L Per point Wiring with 1.5 Sqmm Copper Conductor single core PVC insulated Flame Retardant Low Smoke (FRLSH) Unsheathed 1100 Volt grade multi-stranded Cable drawn through and including PVC Casing and Caping medium grade of suitable size and its Accessories as required at Site, fixing on surface of Wall, Roof, mounted on Sunk Mild Steel Pressed Terminal Box 1.22mm thick of suitable size duly painted with red oxide metal primer with 3.0mm thick Plastic Laminated Sheet Top Cover for mounting Switches, Sockets, etc. including PVC insulated and unsheathed Single Core multi-stranded Copper Conductor Cable of size 1.5 Sqmm (FRLSH) Green in Colour as Earth Continuity Conductor connected to Common Earth and Earth dolly one 3 Per point 5 Amps switch socket outlet Per point controlled by one switch on the independent board, complete all as specified and as directed.Make- Polycab/Havells/KEI.

All as per item No 13 here in before but using 2.5 sq mm single core copper conductor cable of multistranded flame retardant Low smoke (FRLSH) PVC insulated unsheathed 1100 volts grade for 5/15 amps switch socket cobmination point incl running of 2.5 sq mm copper conductor flame retardant PVC wire as earth continuity conductor along with wiring and connecting to the common eath dolly complete all as specified and directed.

M & L Submain wiring with 2 runs of single core 6 sqmm PVC insulated unsheated (FRLSH) multistranded 1100 volts grade with copper conductor drawn through and including non-metalic Rigid PVC Concealed Conduit ISI marked and its accessories including one run of single core 6.0 sqmm PVC insulated unsheated multistranded 1100 volts grade with copper conductor cable as earth continuty conductor along with the wiring and connected from DB to DB/main board complete all as specified and directed.

S & F socket combination flush type multipurpose 2/3 pin 5 amps 2 in 1, 230 Volts all as specified.

S & F switch socket combination flush type multipurpose 2/3 pin 5 amps 2 in 1 230 Volts complete all as specified and directed.

S & F sheet metal enclosure MCB DB TPN 4 way with 200 amps rated bus bar 415 volts double door with magnetic locking system complete including removal of old unsv sheet metal enclosure all as specified Make- Legrand/Havells/Indoasian/L&T.

S & F MCB TPN 415 volts suitable for fixing in MCB DB of capacity 40 / 60 amps complete all as specified and directed.Make- Legrand/Havells/Indoasian/L&T.

S & F MCB SPN 230 volts suitable for fixing on MCB DB of capacity 6 to 30 Amps complete all as specified.Make- Legrand/Havells/Indoasian/L&T.

S & F MCB SP 6 to 30 Amps 240 volts for fixing on MCB DB's all as specified.Make- Legrand/Havells/Indoasian/L&T.

S & F sheet metal enclosure plug and socket with 200 Amps rated bus bar 240 volts with one MCB SP 20 Amps complete all as specified. Make:- Havells/Indoasian/ Legrand

Boring holes horizontally under Road without damaging the surface of Road (minimum 1.0 METRE below the Road Surface with the help of GI Tubing not exc. 80mm bore (dia) for passing of UG Cable, complete all as specified and as directed. NOTE: GI Pipe laid will be measured and paid separately under appropriate Item.

Supply & laying LT UG XLPE sheathed PVC insulated, screened PVC bedded, Galvanised Steel Strip of Wire armoured electric power cable 3.5 core x 50 Sqmm heavy duty with stranded Aluminium Conductor 1100 Volt grade, laid in trenches/ surface of Wall/in GI Pipe along with Pole for connection to OH Lines including brass cable glands mild fteel flat iron clamps etc and testing for following sizes, complete all as specified and as directed. Note : Earthworks, Sand Cushioning, Bricks, GI Pipe etc. will be measured and paid under appropriate Items.

Supply & Erecting Steel Tubular Swaged Pole Type 410-SP-31 (9.0 Metre long) including Cast Iron Base Plate, Finial Taper Plug, Cap, Mild Steel Bolts, Nuts, Screws including applying two coats of Black Bituminous Paint Internally and Externally from bottom End of Pole upto PCC Coping and applying with two coats of Aluminium Painting over a coat of Red oxide Primer (Externally from Top of Coping) including writing MES Pole No. with synthetic Enamel Paint (First Grade/quality), complete all as specified and as directed. Note : Earthwork, Cement Concrete, etc. will be measured and paid under approprite Items.

M & L Stay Assembly complete with Accessories as show in Electrical Plate No. 1 of MES Schedule Part-I, diameter of Stay Rod 16mm, size of Plate 230 x 230 x 6 mm complete all as specified and as directed. Note : Earthwork, Cement Concrete, Mild Steel Stay Clamps with Bolts, Nuts, Stay Strand, Loop Insulator etc. will be measured and paid under approprite Items.

M&L Cross-arms, Bracings, Supports, Clamps and Back Plates fabricated from Structural Steel Sections including Nuts, Bolts, Washer, welding, bending cold or hot, drilling holes for Bolts, in any shape or size as indicated/ directed and inclusive of one coat of Aluminium Primer one Under Coat and One Finishing Coat of Aluminium Paint, complete all as specified and as directed.

S&F Insulator Pin type Porcelain, Vitreous, White, Brown or Green including one Galvanised Mild Steel Spindle, Two Galvanised Iron Washers and One Galvanised Iron Nut, 100mm Height, 65mm dia for 1100 Volt grade complete all as specified and as directed.

S & F Shackle type, Porcelain, Vitreous, White or Brown Insulator of size 100mm height 115mm dia including Galvanised Mild Steel 31x5mm Strap, 14mm dia Insulator Bolts, Nuts, Washers, etc. for Working Pressure 1100 Volt, complete all as specified and as directed.

S & F Loop Type Insulator Vitreous White, Brown or Green, large size with overall dimensions 90x65mm, clearance of hole 16mm dia, complete all as specified and as directed.

S & F Cradles, hexagonal/rectangular fabricated with Galvanised Steel Wire with 4.00mm dia including binding with Aluminium Binding Wire, complete all as specified and as directed. Note : Cost of Binding Wire is deemed to be included in the Quoted Unit Rate.

S&F Aluminium Conductor Steel Reinforced (ACSR) (sizes as ordered) with permissible Sags and providing Jumper, etc., fixing on Electric Poles and binding to Insulators with Aluminium Binding Wire as in OH Conductors including stringing, tightening, etc., complete all as specified and as directed. NOTE : Cost of Binding Wire is deemed to be included in the quoted Unit Rate.

S & F Junction Box for Street Lights of size 205x255x112 mm made out of Polycarbonate material totally enclosed, dust and vermin proof, rain protected slanted roof top, door pasted with rubber gasket, water tight IP 66/67 protection and suitable size of "connectwell" stud teriminal (provision for socket bolting)- 04 Nos suitable for 415 volts, 50 Hz, 3 phase 4 wire internal wiring system including MCB SP 06 amps- 01 No and mounted on security light pole with suitable bracket nuts, bolts including removal of exiting unsv all as specified and directed. Junction Box make:- Hansel Catpart No. DK2525 G or equivallent make of tapari or syntax. MCB make: Havells/ L&T/ Legrand/ Indo asian Note :- Cable glands shall be fixed in inlet and out let of junction box and rate of Cable glands is deem to be included in quoted rate.

S & F LED street light made up off pressure die cast aluminium housing wth toughened glass and high power LEDs as a light source and electronic driver of capacity 60 watts and secondary lenses with IP 66 protection . 10 KV SPD is also included for protection of driver and LEDs . lumen efficacy of light fitting shall be 110 LM/W. and necessary mounting arrangements and provision of 2.5 sq mm three core conductor cable multi stranded from fitting to over head line or Junction box including taking down old unserviceable light fitting.complete all as specified and directed by Engr-in-charge.Make :- Crompton Greaves Cat part No. TRP/409-60-57-SL-GL-NSG or equivallent make of havells/ Bajaj Note :- Housing of street light fitting shall be suitable for 40 to 50 mm dia of bracket.

M&L Street Light Fitting Bracket made out of GI pipe medium grade, 40 mm dia 1.5 mtr long bend to required shape and fixing to pole poles, walls etc., including supply and fixing of MS Clamp, nut-bolts as required duly painted with two coats of aluminium paint over a coat of red oxide primer, including taking down old unserviceable Street Light Fitting bracket, complete all as specified and as directed.

M&L for earthing complete with galvanised steel earth plate electrode size 600x600x6.0mm thick buried directly in ground vertically in a pit of depth not less than 2.25 mtr below ground levels with top edge of the earth plate not less than 1.5 mtr below normal ground level surrounded from all sides by mixture of charcoal and common salt and electrode connected to and including galvanised earth lead wire 4.0 mm dia means of bolts, nuts, check nuts and washers of galvanised steel and GI pipe light grade 20mm dia bore for watering funnel with wire mesh refilling with vegetable soil without bolders and stones, gravels and aggregate etc,and CI cover with frame, PCC chamber pit with PCC 1:3:6 type C-2 excavation and earth work all as shown in electrical plate No 5 connected to earthing test point all as specified or indicated including testing on completion. NOTES : The unit rate includes for protection pipe and GI strip dia from top of earth plate up to 5.00 meter above ground level.

Supply & Laying LT UG XLPE cable of size 4 core x 16 sq mm laid in trenches/ floors/ on wall/ service connections PVC insulated, sheathing and armoured 1100 volts grade with aluminium conductor with necessary end terminal/ cable gland as per site requirement including connecting to the main switches/ cut outs MCB/ MCCB with necessary lugs after cutting to required length of cable all as specified and directed.

Supply & Laying LT UG XLPE cable of size 4 core x 35 sq mm laid in trenches/ floors/ on wall/ service connections PVC insulated, sheathing and armoured 1100 volts grade with aluminium conductor with necessary end terminal/ cable gland as per site requirement including connecting to the main switches/ cut outs MCB/ MCCB with necessary lugs after cutting to required length of cable all as specified and directed.

Supply & Laying LT UG XLPE cable of size 4 core x 25 sq mm laid in trenches/ floors/ on wall/ service connections PVC insulated, sheathing and armoured 1100 volts grade with aluminium conductor with necessary end terminal/ cable gland as per site requirement including connecting to the main switches/ cut outs MCB/ MCCB with necessary lugs after cutting to required length of cable all as specified and directed.

Supply & Laying LT UG XLPE cable of size 2 core x 10 sq mm laid in trenches/ floors/ on wall/ service connections PVC insulated, sheathing and armoured 1100 volts grade with aluminium conductor with necessary end terminal/ cable gland as per site requirement including connecting to the main switches/ cut outs MCB/ MCCB with necessary lugs after cutting to required length of cable all as specified and directed.

Supply & laying , testing & commissioning of LT PVC insulated, 3 core copper Conductor 1100 Volt grade, cross-sectional area 2.5 Sqmm 3 core, connecting along security pole from Junction Box to Security light including Brass Cable, etc, complete all as specified and as directed.

Supply and fix outdoor type, free standing, dust and vermin proof, 3 ph, 4 wire, 415 V, 50 Hz, AC Supply, fabrication from 3.15 mm CRC sheet finished with powder coating of capacity 250A, 4 Pole copper bus bar panel complete all as specified and directed by engr-in-charge Make- Havells/L&T/Indoasian.

S & F Outdoor Powder coated CPRI Approved Busbar Chamber floor mounted of size (450mm x 300mm x 450mm) having 4 pole copper bus bars of rating 200A for reliable distribution of cables, made out of CRCA sheet 3.15 mm thick totally enclosed, dust and vermin proof, rain protected slanted roof top, door pasted with rubber gasket, water tight IP 42 protection single leaf shutter in front having proper locking arrangements, and painted with powder coating paint and suitable size of "connectwell" stud teriminal with provision for 4 Nos of Copper Busbar(1.5 Ft Long each) with suitable insulators, nuts, bolts and mounted on iron frame complete all as specified and as directed. NOTES :- 1. The rates for PCC and excavation shall be including in unit quoted rate.

S&F Street Light Panel for Mx Load of 12 KW confirms to IS /IEC 60947-4-1 provided with protection degree IP 54 with inbuilt internal short Circuit protection with FRLS low smoke internal wiring with Digital Timer 24 Hr with 65 A triple pole Contactor, 63 A TPN MCB complete all as specified and directed. Model:-IHXTS09120, Make - Havells or equivalent in Styntax, L&T

Supply & lay GI tubing light grade in protection of cable at road crossing /hard standing/pole protection fixed with clamps as per site requirement etc of size 40 mm dia bore complete all as specified and directed .

Supply & lay GI tubing light grade in protection of cable at road crossing /hard standing/pole protection fixed with clamps as per site requirement etc of size 80 mm dia bore complete all as specified and directed .

Supply Laying and Fix 3 layered (outer green coloured UV stabalized , middle black coloured UV stabalized, and inner most layer white coloured with antimicrobial property) fusion welded PP-R ( Polypropyelene random copolymer) Pipes 63 mm dia outer dia ISI marked and fittings including plain PPR Fittings and brass threaded PPR fittings and cramping , cutting and making good to the damages of grade PN -16 SDR 7.4 including laid in trenches or surface , fixing on wall with clamps at 1.00m spacing including testing of joints complete all as specified and as directed. Make:- SFMC or equivalent make of PRINC/FINOLEX/WET FLOW. Note - Excavation shall be measured and paid separately

Supply Laying and Fix 3 layered (outer green coloured UV stabalized , middle black coloured UV stabalized, and inner most layer white coloured with antimicrobial property) fusion welded PP-R ( Polypropyelene random copolymer) Pipes 50 mm dia outer dia ISI marked and fittings including plain PPR Fittings and brass threaded PPR fittings and cramping , cutting and making good to the damages of grade PN -16 SDR 7.4 including laid in trenches or surface , fixing on wall with clamps at 1.00m spacing including testing of joints complete all as specified and as directed. Make:- SFMC or equivalent make of PRINC/FINOLEX/WET FLOW. Note - Excavation shall be measured and paid separately

Supply Laying and Fix 3 layered (outer green coloured UV stabalized , middle black coloured UV stabalized, and inner most layer white coloured with antimicrobial property) fusion welded PP-R ( Polypropyelene random copolymer) Pipes 40 mm dia outer dia ISI marked and fittings including plain PPR Fittings and brass threaded PPR fittings and cramping , cutting and making good to the damages of grade PN -16 SDR 7.4 including laid in trenches or surface , fixing on wall with clamps at 1.00m spacing including testing of joints complete all as specified and as directed. Make:- SFMC or equivalent make of PRINC/FINOLEX/WET FLOW. Note - Excavation shall be measured and paid separately

Supply Laying and Fix 3 layered (outer green coloured UV stabalized , middle black coloured UV stabalized, and inner most layer white coloured with antimicrobial property) fusion welded PP-R ( Polypropyelene random copolymer) Pipes 32 mm dia outer dia ISI marked and fittings including plain PPR Fittings and brass threaded PPR fittings and cramping , cutting and making good to the damages of grade PN -16 SDR 7.4 including laid in trenches or surface , fixing on wall with clamps at 1.00m spacing including testing of joints complete all as specified and as directed. Make:- SFMC or equivalent make of PRINC/FINOLEX/WET FLOW. Note - Excavation shall be measured and paid separately

Supply Laying and Fix 3 layered (outer green coloured UV stabalized , middle black coloured UV stabalized, and inner most layer white coloured with antimicrobial property) fusion welded PP-R ( Polypropyelene random copolymer) Pipes 25 mm dia outer dia ISI marked and fittings including plain PPR Fittings and brass threaded PPR fittings and cramping , cutting and making good to the damages of grade PN -16 SDR 7.4 including laid in trenches or surface , fixing on wall with clamps at 1.00m spacing including testing of joints complete all as specified and as directed. Make:- SFMC or equivalent make of PRINC/FINOLEX/WET FLOW. Note - Excavation shall be measured and paid separately

S & F PP-R Gate valve (Brass insert) 3 layered (outer green coloured UV stabalized , middle black coloured UV stabalized, and inner most layer white coloured with antimicrobial property ) fusion welded PP-R ( Polypropyelene random copolymer) gate valve brass 63 mm Outer dia light weight ISI marked as per pre requirement of the site with handle screwed both ends for PP-R Pipes or for unions fixed of grade PN-25 , SDR-7.4 complete all as specified and as directed.Make:- SFMC or equivalent make of PRINC/FINOLEX/WET FLOW.

S & F PP-R Gate valve (Brass insert) 3 layered (outer green coloured UV stabalized , middle black coloured UV stabalized, and inner most layer white coloured with antimicrobial property ) fusion welded PP-R ( Polypropyelene random copolymer) gate valve brass 40 mm Outer dia light weight ISI marked as per pre requirement of the site with handle screwed both ends for PP-R Pipes or for unions fixed of grade PN-25 , SDR-7.4 complete all as specified and as directed.Make:- SFMC or equivalent make of PRINC/FINOLEX/WET FLOW.

S & F PP-R Gate valve (Brass insert) 3 layered (outer green coloured UV stabalized , middle black coloured UV stabalized, and inner most layer white coloured with antimicrobial property ) fusion welded PP-R ( Polypropyelene random copolymer) gate valve brass 32 mm Outer dia light weight ISI marked as per pre requirement of the site with handle screwed both ends for PP-R Pipes or for unions fixed of grade PN-25 , SDR-7.4 complete all as specified and as directed.Make:- SFMC or equivalent make of PRINC/FINOLEX/WET FLOW.

S & F PP-R Gate valve (Brass insert) 3 layered (outer green coloured UV stabalized , middle black coloured UV stabalized, and inner most layer white coloured with antimicrobial property ) fusion welded PP-R ( Polypropyelene random copolymer) gate valve brass 25 mm Outer dia light weight ISI marked as per pre requirement of the site with handle screwed both ends for PP-R Pipes or for unions fixed of grade PN-25 , SDR-7.4 complete all as specified and as directed.Make:- SFMC or equivalent make of PRINC/FINOLEX/WET FLOW.

M & L For making connections of PP-R distribution branch with PPR Main of outer dia of pipes 25 mm to 63 mm size by providing and fixing tee including cutting and making fusion joint etc complete all as specified and as directed by Engr-in-charge.

M & L For making connections from existing distribution line with compete DI specials by providing and fixing DI tee of suitable size including cutting and making fusion joint with 90 mm PPR pipes etc complete all as specified and as directed by Engr-in-charge.

S & F powder coated CPRI approved Busbar chamber for reliable distribution of cables made out of CRCA sheet 3.15 mm thick totally enclosed, dust and vermin proof, rain protected slanted room top, door pasted with rubber gasket, water tight IP 42 proection single leaf shutter in front having proper locking arrangements, and painted with powder coating paint and suitable size of "Connect Well" stud terminal with provision for 4 Nos of Copper Busbar with suitable insulation for 430 Voltas opertaion with suitable clamps, nuts, bolts, and mounted on iron frame complete all as specified and as directed Notes:- 1. The Rates for PCC shall be measured and paid separately. 2. Cost of Iron Frame included in quoted unit rate (Busbar Panel for Bay servicing) (a) 200 Amsp rated copper bus bar TPN of length 60 cm each duly insulated with coloured PVC sleeve as per standard colour code. (b) Incommer, MCCB 4 pole 100 Amps, thermal magnetic type DU125D with breaking capacity 18 KA wih thermal magnetic telease at 415 volts, including spreader terminal magnetic telease at 415 Voltas including sprader terminal, Make: L &T Model -DU125D, Cat Part No CM90677OOLO 01 No and equivalent make of legrand, Indo Asian, Havells

M & L for earthing complete with galvanized steel earth plate electorde 600 x 600 x 6 cm thick buried directly in ground earth pit not less than 2.25 mtr deep below normal ground level with top edge of the plate not less than 1.5 mtr below ground level connected to galvanized iron strip 25 x 4 mm as earthing lead by mean of nut/bolt and washer galvanized iron or steel drawn through 40mm dia light grade GI pipe as shown in electrical plate No 3 of SSR part -I of 2020 including necessary excavation and earth work GI pipe 20mm dia light grade for watering PCC chamber with PCC cover in cement concrete 1:2:4 type B1 (20mm graded aggregate), funnel wire mesh charcoal dust, salt etc connected to panel board/Gen set as indicated including complete all as specified and as directed by Engr-in-charge.

R R ENTERPRISES

M/S Singha Enterprise

bkgeneralstores

M/S Mahabir Traders