Construction of Dinning Shed for Community Center near Pannaiyadi Karuppu Kovil at Adavathur in Paganur Panchayat in Manikandam Block in Trichy District under MLACDS 2025-26

Amount

Construction of Dinning Shed for Community Center near Pannaiyadi Karuppu Kovil at Adavathur in Paganur Pnachayat in Manikandam Block in Trichy District under MLACDS 2025-26 Earth work excavation for foundation in ordinary soil with initial lead and lift etc., complete (Narrow Excavation)

Supplying and filling with clean river sand in layers of 15cm thick including watering and ramming to consolidation etc complete

Plain Cement Concrete 1:4:8 mix using 40mm ISS gauge HBBG metal for foundation etc., complete

Providing steel centering and shuttering with necessary strutting arrangements for sides and soffits of all RCC works etc complete-With out strutting

Plain Cement Concrete 1:2:4 mix using 20mm ISS gauge HBBG metal from the approved quarry including mixing, laying, consolidating, curing cost and conveyance of all materials to site and all labour charges etc., complete as per standard specification

Reinforced Cement Concrete 1:1.5:3 mix using 20mm ISS gauge HBBG metal from the approved quarry including mixing, laying, consolidating, curing cost and conveyance of all materials to site and all labour charges etc., complete as per standard specification-for foundation and basement

Supplying cutting bending and fixing in position of RTS/MS grills including cost of steel and binding wire etc., complete

Brick work in cement mortar 1:5 mix using country bricks of size 8 3/4" x 4 1/4" x 2 3/4" including cost of materials and labour charges etc. as per std. specification-for foundation and basement

for Super Structure

Supplying and fixing in position ofor roof truss using necessary MS Hollow sectional Square and Rectangular Pipe including cost of welding, cutting, fixing and all labour charges etc., completed labour charges for fixing in position etc., complete

Supplying and fixing inposition of pvc painted Galvanium sheet corrugated roofing with 0.47mm FRB thick with painted coat lncluding cost of bolt,nut and washer etc.complete.

Supply and fixing of Weld mesh frame of size 2.70m x 0.90m using MS iron angle of size 45 x 45 x 5mm with one ledge and two braces madeout of MS flat 50 x 6mm size all round frame for weld mess including welding with frame all round and one coat of red oxide paint over the grill gate etc., complete

Plastering with Cement Mortar 1:5 mix 12mm thick including hacking etc., complete

Extra for laying and finishing the concrete pavement with surface vibrators, side centering with MS channel, dewatering equipments, mechanical trowel finisher to have smooth finish as per the directions of the department officer. Excluding water and electrical charges like generator

Supply & Fixing Bitument Tar Pad 15mm Thik including cost and conveyance of and all other labour charges for cutting and fixing in position etc.,

Supply and fixing of GI sheet door of size 1.20x 2.10m including alround frame and inner frames made of 35 x 35 x 6mm with one ledge and two braces made out of MS flat 30 x 5mm size without door frame hot with necessary kudjun pins and locking arrangements on both sides complete. The BWG GI plain sheet should cover the me angle frame alround in such a way that there would not be any exposed of the angles to frame must be with aluminum rivets @ 25cm etc, . The entire shutter door must be painted with one coat of rod oxide paint and the shutter properly fixed in position etc., complete.

Painting two coats with ready mixed plastic emulsion paint of 1st class quality and of approved color over a priming coat including through scraping clean removal of dirt etc., complete.

Painting with best synthetic enamel paint of approved Colour and high quality with two coats to new iron work etc. complete.

Wiring with 2x1.5sqmm (22/0.3) PVC insulated unsheathed SC Cu. Conductor of 1100V grade in suitable PVC rigid pipe on wall and ceiling with PVC accessories with TW switch boc 5A F.T. switch inflush with wall covered with hylum sheet of 3mm thick with painting of suitable color for Open PVC light / fan point (for elctronic regulator) SD-21.

Wiring with 2 X 1.5 sqmm (56/0.3) PVC insulated SC unsheathed Cu. conductor cable of 1100 volt grade in suitable PVC rigid pipes in wall and ceiling with PVC accessories with 150x100x113mm T.W. switch box and 5amps 3 pin non inter locking CS plug with continuous earth wire connection of 14 SWG TC wire and making good of the concealed plug point (SD-36)

Supply and fixing of single box type 4.40 W flu fitting complete with copper choke and condennor with T.W. blocks on wall or ceiling with tube with PVC unsheathed copper leads from terminals to the fitting. ( S.D.88 )

Supply & fixing of 1200mm AC ceiling fan complete set with steped electronic regulator with existing clamp (SD. 107)

Provision for Name Borad

GST Amount for providing Service to Government Contract Works for the above Construction Works. { GST Amount is the Total GST Amount for total overall quoted amount above this row in column "BB" for all works in this package}

AMN ENTERPRISES (BID ID -1425860)