Maintenance, Erection & Dismantling of HT, LT, TC Erection under Jurisdiction of BARANPURA S/Dn. Or Any other S/Dn. Of CFC LALBAUG Division

Maintenance, Erection and Dismantaling of HT/LT and Transformer center For BARANPURA SUB DIVISION and ANY S/Dn Of CFC

Lalbaug Division.

PR NO : 234274 TENDER ID: 601 / 26-27

Item Code No. Description of Work Unit Qty. Total value

HT TAPPING FROM THE EXISTING POLE INCLUDING FIXING OF CROSS ARMS, CLAMPS

ANTI-CLIMBING DEVICES, DANGER BOARD,INSULATORS, ETC, COMPLETE AND

1 9901000001 PAINTING OF FABRICATED MATERIALS AND NUMBERING COMPLETE WITH COST OF Number 481 10

PAINTS AS PER STANDARD SPECIFICATION BUT EXCLUDING ERECTION OF GUY SET

ERECTION OF PSC POLES OF 8 *200 KG INCLUDING EXCAVATION OF PIT AND

REFILLING OF EARTH, FIXING OF CROSS ARMS, TOP FITTING CLAMPS ANTI-CLIMBING

DEVICES, INSULATORS ETC. COMPLETE AND PAINTING OF FABRICATED MATERIALS

USED ON THE POLES AND NUMBERING WITH COST OF PAINTS AS PER STANDARD

SPECIFICATION BUT EXCLUDING ERECTION OF GUY SET AND EARTHING

ERECTION STEEL POLES OF 8 TO 9 & 11 METERS INCLUDING EXCAVATION OF PIT AND

REFILLING OF EARTH, FIXING OF CROSS ARMS, TOP FITTING CLAMPS, ANTICLIMBING

DEVICES DANGER BOARD, INSULATORS, ETC. COMPLETE AND PAINTING OF STEEL

POLE, FABRICATED MATERIALS USED ON ON THE POLE AND NUMBERING WITH COST

OF PAINT AS PER STANDARD SPECIFICATION BUT EXCLUDING ERECTION OF GUT SET

ERECTION STEEL POLES OF 13 METERS FOR RAILWAY CROSSING ON BG/MG/NG/LINE

FOR 0.400/11/22KV OVERHEAD LINE I.E. INCLUDING EXCAVATION OF PIT AND REFILLING

OF EARTH, FIXING OF CROSS ARMS, TOP FITTING CLAMPS, ANTICLIMBING DEVICES

4 9902010005 DANGER BOARD, INSULATORS, ETC. COMPLETE AND PAINTING OF STEEL POLES, Number 2234 10

FABRICATED MATERIALS USED ON THE POLES AND NUMBERING WITH COST OF PAINT

AS PER STANDARD SPECIFICATION BUT EXCLUDING ERECTION OF GUY SET AND

5 9902010006 ERECTION OF SUPPORT POLE - PSC Number 735 9

6 9902010007 ERECTION OF SUPPORT POLE - RSJ Number 735 10

ERECTION OF DOUBLE POLE STRUCTURE OF 8 METERS PSC

POLE INCLUDING EXCAVATION OF PITS & REFILLING OF EARTH, FIXING OF CHANNELS, SUPPORTING

ANGLES , CLAMPS, ANTI-CLIMBING DEVICES DANGER BOARDS, INSULATORS, ETC., COMPLETE AND

PAINTING OF POLES FABRICATED MATERIALS USED ON THE POLES AND NUMBERING WITH COST OF

PAINTS AS PER STANDARD SPECIFICATION BUT EXCLUDING ERECTION OF GUY SETS AND EARTHING. (

W/O AB SWITCH ).

ERECTION OF DOUBLE POLE STRUCTURE OF 8 TO 9 METERS STEEL

POLE INCLUDING EXCAVATION OF PITS & REFILLING OF EARTH, FIXING OF CHANNELS, SUPPORTING

ANGLES , CLAMPS, ANTI-CLIMBING DEVICES DANGER BOARDS, INSULATORS, ETC., COMPLETE AND

PAINTING OF POLES FABRICATED MATERIALS USED ON THE POLES AND NUMBERING WITH COST OF

PAINTS AS PER STANDARD SPECIFICATION BUT EXCLUDING ERECTION OF GUY SETS AND EARTHING. (

W/O AB SWITCH ).

ERECTION OF DOUBLE POLE STRACTURE WITH MOUNTING OF AB SWITCH, DO FUSES

OF 8 METERS, 200 KG PSC POLES INCLUDING EXCA-VATION OF PITS AND REFILLING OF EARTH,

FIXING OF CHANNELS,SUPPORTING ANGLES CLAMPS, ANTI-CLIMBING DEVICES DANGER BOARD,

INSULATORS, DO FUSES, ETC., COMPLETE AND PAINTING OF FABRICATED MATERIALS USED ON THE

POLES AND NUMBERING WITH COST OF PAINTS AS PER STANDARD SPECIFICATION BUT EXCLUDING

ERECTION OF GUY SET AND EARTHING.

ERECTION OF DOUBLE POLE STRACTURE FOR CTPT INSTALLATION WITH MOUNTING OF

AB SWITCH, DO FUSES OF 8 METERS, 200 KG PSC POLES INCLUDING EXCA-VATION OF PITS AND

REFILLING OF EARTH, FIXING OF CHANNELS,SUPPORTING ANGLES CLAMPS, ANTI-CLIMBING DEVICES

DANGER BOARD, INSULATORS, DO FUSES, ETC., COMPLETE AND PAINTING OF FABRICATED MATERIALS

USED ON THE POLES AND NUMBERING WITH COST OF PAINTS AS PER STANDARD SPECIFICATION BUT

EXCLUDING ERECTION OF GUY SET AND EARTHING.

Maintenance, Erection and Dismantaling of HT/LT and Transformer center For BARANPURA SUB DIVISION and ANY S/Dn Of CFC

Lalbaug Division.

PR NO : 234274 TENDER ID: 601 / 26-27

Item Code No. Description of Work Unit Qty. Total value

ERECTION OF DOUBLE POLE STRACTURE WITH MOUNTING OF

AB SWITCH, DO FUSES, 9 & 11 METERS STEEL POLES INCLUDING EXCAVATION OF PITS AND

REFILING OF EARTH, FIXING OF CHANNELS, SUPPORTING ANGLE CLAMPS, ANTI-CLIMBING DEVICES

DANGER BOARDS, INSULATORS, ETC., COMPLETE AND PAINTING OF POLES FABRICATED MATERIALS

USED ON THE POLES AND NUMBERING WITH COST OF PAINT AS PER STANDARD SPECIFICATION BUT

EXCLUDING ERECTION OF GUY SET AND EARTHING.

ERECTION OF DOUBLE POLE STRACTURE FOR CTPT INSTALLATION WITH MOUNTING

OF AB SWITCH, DO FUSES, 9 & 11 METERS STEEL POLES INCLUDING EXCAVATION OF PITS

AND REFILING OF EARTH, FIXING OF CHANNELS, SUPPORTING ANGLE CLAMPS, ANTI-CLIMBING DEVICES

12 9902020010 DANGER BOARDS, INSULATORS, ETC., COMPLETE AND PAINTING OF POLES FABRICATED MATERIALS Number 4171 5

USED ON THE POLES AND NUMBERING WITH COST OF PAINT AS PER STANDARD SPECIFICATION BUT

EXCLUDING ERECTION OF GUY SET AND EARTHING.

ERECTION OF SINGLE POLE STRACTURE WITH MOUNTING OF DO FUSES,

TRANSFORMERS, LIGHTENING ARRESTERS, DISTRIBUTION BOX ETC. OF 8 METERS

KG PSC POLES INCLUDING EXCAVATION OF PITS AND REFILING OF EARTH, CARTING OF

TRANSFORMERS FROM STORE TO SITE, FIXING OF CHANNELS SUPPORTING ANGLES, BRACING CROSS

ARMS, CLAMPS ANTI-CLIMBING DEVICE DANGER BOARDS CONDUCTOR AND CABLE WIRING ETC.,

COMPLETE AND PAINTING OF FABRICATED MATERIALS USED ON THE POLES AND NUMBERING WITH

COST OF PAINTS AS PER STANDARD SPECIFICATION BUT EXCLUDING ERECTION OF GUY SETS AND

ERECTION OF SINGLE POLE STRACTURE WITH MOUNTING OF DO FUSES,

TRANSFORMERS, LIGHTENING ARRESTERS AND WITHOUT DISTRIBUTION BOX ETC OF

METERS 200 KG PSC POLES INCLUDING EXCAVATION OF PITS AND REFILING OF EARTH, CARTING

OF TRANSFORMERS FROM STORE TO SITE, FIXING OF CHANNELS SUPPORTING ANGLES, BRACING CROSS

ARMS, CLAMPS ANTI-CLIMBING DEVICE DANGER BOARDS CONDUCTOR AND CABLE WIRING ETC.,

COMPLETE AND PAINTING OF FABRICATED MATERIALS USED ON THE POLES AND NUMBERING WITH

COST OF PAINTS AS PER STANDARD SPECIFICATION BUT EXCLUDING ERECTION OF GUY SETS AND

ERECTION OF DOUBLE POLE STRUCTURE WITH MOUNTING OF

AB SWITCH, DO FUSES, 13 METERS STEEL POLES INCLUDING EXCAVATION OF PITS AND

REFILING OF EARTH, FIXING OF CHANNELS, SUPPORTING ANGLE CLAMPS, ANTI-CLIMBING DEVICES

15 9902020019 DANGER BOARDSINSULATORS,ETC COMPLETE AND PAINTING OF POLES FABRICATED MATERIALS USED Number 4736 5

ON THE POLES AND NUMBERING WITH COST OF PAINTS AS PER STANDARD SPECIFICATION BUT

EXCLUDING ERECTION OF GUY SET AND EARTHING.

ERECTION OF DOUBLE POLE STRACTURE WITH MOUNTING OF DO FUSES,

TRANSFORMERS, LIGHTENING ARRESTERS, DISTRIBUTION BOX ETC. OF 8 METERS

KG PSC POLES INCLUDING EXCAVATION OF PITS AND REFILING OF EARTH, CARTING OF

TRANSFORMERS, FROM STORE TO SITE FIXING OF CHANNELS SUPPORTING ANGLES, BRACING CROSS

ARMS, CLAMPS ANTI-CLIMBING DEVICE DANGER BOARDS CONDUCTOR AND CABLE WIRING

ETC.,COMPLETE AND PAINTING OF FABRICATED MATERIALS USED ON THE POLES AND NUMBERING

WITH COST OF PAINTS AS PER STANDARD SPECIFICATION BUT EXCLUDING ERECTION OF GUY SETS AND

ERECTION OF DOUBLE POLE STRACTURE WITH MOUNTING OF DO FUSES,

TRANSFORMERS, LIGHTENING ARRESTERS & WITHOUT DISTRIBUTION BOX ETC OF

METERS 200 KG PSC POLES INCLUDING EXCAVATION OF PITS AND REFILING OF EARTH, CARTING

OF TRANSFORMERS, FROM STORE TO SITE FIXING OF CHANNELS SUPPORTING ANGLES, BRACING CROSS

ARMS, CLAMPS ANTI-CLIMBING DEVICE DANGER BOARDS CONDUCTOR AND CABLE WIRING

ETC.,COMPLETE AND PAINTING OF FABRICATED MATERIALS USED ON THE POLES AND NUMBERING

WITH COST OF PAINTS AS PER STANDARD SPECIFICATION BUT EXCLUDING ERECTION OF GUY SETS AND

Maintenance, Erection and Dismantaling of HT/LT and Transformer center For BARANPURA SUB DIVISION and ANY S/Dn Of CFC

Lalbaug Division.

PR NO : 234274 TENDER ID: 601 / 26-27

Item Code No. Description of Work Unit Qty. Total value

ERECTION OF SINGLE POLE STRACTURE WITH MOUNTING OF A B SWITCH, DO FUSE,

TRANSFORMERS, LIGHTENING ARRESTERS, DISTRIBUTION BOX 8 TO 9 & 11 METERS

STEEL POLES INCLUDING EXCAVATION OF PITS AND REFILING OF EARTH,CARTING OF

18 9902030017 TRANSFORMERS FROM STORE TO SITE,FIXING OF CHANNELS, SUPPORTING ANGLES, BRACING, CROSS Number 5305 5

ARMS,CLAMPS, ANTI CLIMBING, DEVICES, DANGER BOARDS, CONDUCTOR AND CABLE WIRING

ETC.COMPLETE AND PAINTING OF POLES FABRICATED MATERIALS USED ON THE POLES AND

NUMBERING AS PER STANDARD SPECIFICATION BUT EXCLUDING ERECTION OF GUY SETS AND EARTHING.

ERECTION OF SINGLE POLE STRACTURE WITH MOUNTING OF A B SWITCH, DO FUSE,

TRANSFORMERS, LIGHTENING ARRESTERS & WITHOUT DISTRIBUTION BOX 8 TO 9 &

11 METERS STEEL POLES INCLUDING EXCAVATION OF PITS AND REFILING OF EARTH,CARTING OF

19 9902030017 TRANSFORMERS FROM STORE TO SITE,FIXING OF CHANNELS, SUPPORTING ANGLES, BRACING, CROSS Number 4081 5

ARMS,CLAMPS, ANTI CLIMBING, DEVICES, DANGER BOARDS, CONDUCTOR AND CABLE WIRING

ETC.COMPLETE AND PAINTING OF POLES FABRICATED MATERIALS USED ON THE POLES AND

NUMBERING AS PER STANDARD SPECIFICATION BUT EXCLUDING ERECTION OF GUY SETS AND EARTHING.

ERECTION OF DOUBLE POLE STRUCTURE WITH MOUNTING OF A B SWITCH, DO FUSE,

TRANSFORMERS, LIGHTENING ARRESTERS, DISTRIBUTION BOX 8 TO 9 & 11 METERS

STEEL POLES INCLUDING EXCAVATION OF PITS AND REFILLING OF EARTH,CARTING OF

20 9902030012 TRANSFORMERS FROM STORE TO SITE,FIXING OF CHANNELS, SUPPORTING ANGLES, BRACING, CROSS Number 10609 5

ARMS,CLAMPS, ANTI CLIMBING, DEVICES, DANGER BOARDS, CONDUCTOR AND CABLE WIRING

ETC.COMPLETE AND PAINTING OF POLES FABRICATED MATERIALS USED ON THE POLES AND

NUMBERING AS PER STANDARD SPECIFICATION BUT EXCLUDING ERECTION OF GUY SETS AND EARTHING.

ERECTION OF DOUBLE POLE STRUCTURE WITH MOUNTING OF A B SWITCH, DO FUSE,

TRANSFORMERS, LIGHTENING ARRESTERS & WITHOUT DISTRIBUTION BOX 8 TO 9 &

11 METERS STEEL POLES INCLUDING EXCAVATION OF PITS AND REFILLING OF EARTH,CARTING OF

21 9902030012 TRANSFORMERS FROM STORE TO SITE,FIXING OF CHANNELS, SUPPORTING ANGLES, BRACING, CROSS Number 9385 5

ARMS,CLAMPS, ANTI CLIMBING, DEVICES, DANGER BOARDS, CONDUCTOR AND CABLE WIRING

ETC.COMPLETE AND PAINTING OF POLES FABRICATED MATERIALS USED ON THE POLES AND

NUMBERING AS PER STANDARD SPECIFICATION BUT EXCLUDING ERECTION OF GUY SETS AND EARTHING.

ERECTION OF GUY SETS INCLUDING EXCAVATION OF PITS & REFILING OF EARTH, AS

PER STANDARD SPECIFICATION WITH STAY CLAMPS STAY WIRES, ANCHOR ROD,

22 9902040001 TURN BUCKLE, EYE BOLT, GUY INSULATOR, CEMENT CONCRETE BLOCK, ETC., BUT Number 561 10

EXCLUDING CONCRETING.

CONCRETING/ MUFFING OF POLES GUY ETC., INCLUDING COST OF CEMENT,AND

METAL (1:2:4) AND WATER ETC., AS PER C.C.M-20 GRADE STANDARD SPECIFICATION .

ERECTION COIL TYPE EARTHING INCLUDING COST OF COAL & SALT, ETC.BUT

WITHOUT COST OF G I WIRE & COIL. AS PER STANDARD SPECIFICATION 10 KG SALT +

10KG COAL.GI WIRE TO BE PASSED THROUGH PVC RIGID PIPE FOR SUITABLE LENGTH

AS PROVIDED BY THE S/DN ENGR. IN CHARGE

SRTINGING OF 34MM2 ,55MM2,AAA CONDUCTOR, FOR 11 KV & L.T. LINE INCLUDING ONE COND

FIXING OF INSULATORS, BINDING, JUMPERING, ETC. PER KM

SRTINGING OF 100 MM2, ACSR/DOG CONDUCTOR, FOR 11 KV & L.T.LINES ONE COND

INCLUDING FIXING OF INSULATORS, BINDING, JUMPERING, ETC. PER KM

THE WORK OF STRINGING OF ABC OF FOLLOWING SIZES INCLUDING FITTING OF ALL

ACCESSRIES I.E. SPECIAL DESIGN SUSPENSION / TENASION CLAMP, FIXING OF CROSS

ARM, L.T. SHACKLE INSULATOR , ETC. FOR FIXING OF MESSAGER WIRE COMPLETE, AS

REQUIRED & DIRECTED BY ENGINEER-IN-CHARGE A: 3 X 50MM2+16MM2+1X 35MM2 B:

Maintenance, Erection and Dismantaling of HT/LT and Transformer center For BARANPURA SUB DIVISION and ANY S/Dn Of CFC

Lalbaug Division.

PR NO : 234274 TENDER ID: 601 / 26-27

Item Code No. Description of Work Unit Qty. Total value

THE WORK OF STRINGING OF ABC OF FOLLOWING SIZES INCLUDING FITTING OF ALL

28 9903000005 ACCESSRIES I.E. SPECIAL DESIGN SUSPENSION / TENASION CLAMP, FIXING OF CROSS KM 9625 5

ARM, L.T. SHACKLE INSULATOR , ETC. FOR FIXING OF MESSAGER WIRE COMPLETE, AS

REQUIRED & DIRECTED BY ENGINEER-IN-CHARGE A : 1 X 35MM2 + 1 X 25MM2

THE WORK OF STRINGING OF 11 KV ABC OF FOLLOWING SIZES IN URBAN AREA

INCLUDING FITTING OF ALL ACCESSRIES I.E. SPECIAL DESIGN SUSPENSION / TENASION CLAMP, FIXING OF

CROSS ARM, BINDING TO PIN INSULATOR,PREPARING SHCKLE POINT JUMPERS ETC AS REQUIRED &

DIRECTED BY ENGINEER-IN-CHARGE A: 3 X95MM2+1X 80MM2 B: 3 X70MM2+1X 70MM2

THE WORK OF STRINGING OF 11 KV ABC OF FOLLOWING SIZES IN RURAL AREA

INCLUDING FITTING OF ALL ACCESSRIES I.E. SPECIAL DESIGN SUSPENSION / TENASION CLAMP, FIXING OF

CROSS ARM, BINDING TO PIN INSULATOR,PREPARING SHCKLE POINT JUMPERS ETC AS REQUIRED &

DIRECTED BY ENGINEER-IN-CHARGE A: 3 X95MM2+1X 80MM2 B: 3 X70MM2+1X 70MM2

PROVIDING GUARDING TO HT LINE ON ROAD/RAIL CROSSING

PROVIDING GUARDING OF LT LINE ON ROAD/RAIL CROSSING

33 9901000002 LT LINE TAPPING SINGLE PHASE. Number 51 10

34 9901000003 LT LINE TAPPING THREE PHASE. Number 93 10

LAYING OF OVER HEAD LT CABLE FOR ROAD CROSSING HT LINE CROSSING AND

TELEPHONE LINE CROSSING ETC (PER SPAN)

Dismentalling of all size (8,9,11,13…mtrs.) of RSJ (girder) Poles including dimentalling of relevant

channels, cross arms insulators, jumpers, binding, earthing etc. INCLUDING Cr. IN STORE

Dismentalling of PSC Poles including dimentalling of relevant channels, cross arms insulators,

jumpers, binding, earthing etc. INCLUDING Cr. IN STORE

38 9907000009 Dismentalling of conductor from line. INCLUDING Cr.IN STORE KM 1055.5 10

39 9907000012 Dismentalling of 8 MTR PSC D.P.Structure. INCLUDING Cr. IN STORE Number 1322 10

Dismentalling of 8 MTR PSC POLE Transformer Structure up to 100 kva. INCLUDING Cr. IN

41 9907000012 Dismentalling of 8 TO 9 MTR STEEL POLE D.P.Structure. INCLUDING Cr. IN STORE Number 1910.5 10

Dismentling OF 11 KV ABC from line. INCLUDING Cr. IN STORE IN RURAL AREA

INCLUDING REMOVING OF ALL ACCESSRIES

Dismentalling of A.B.Cable from line. INCLUDING Cr. IN STORE OF FOLLOWING SIZES:A:

Dismentalling of A.B.Cable from line. INCLUDING Cr. IN STORE OF FOLLOWING SIZES: A :

INSTALLATION OF ENERGY METER & MMB/SMC BOX WITH ELECTRICAL WIRING ON

PROVIDING SINGLE PHASE SERVICE CONNECTION WITH PVC 2.5/4.0 MM2 TWIN

CORECABLE FROM TERMINAL POLE TO METERING POINT INCLUDING FIXING

OFMETER WITH METER EARTHING COMPLETE WORK AS PER STANDARD

SPECIFICATION BUT EXCLUDING COST OF MATERIALS.

PROVIDING THREE PHASE FOUR WIRE SERVICE CONNECTION WITH PVC 4MM2/10MM2

FOUR CORE CABLE FROM TERMINAL POLE TO METERING POINT INCLUDING FIXING OF

METER WITH METER EARTHING COMPLETE WORK AS PER STANDARD SPECIFICATION

BUT EXCLUDING COST OF MATERIALS

48 9909000001 CARTING OF PSC POLE AT DESTINATION(ABOVE 5 KM) Number 378 10

49 9909000006 CARTING OF RSJ POLE AT DESTINATION(ABOVE 5 KM) Number 536 10

Maintenance, Erection and Dismantaling of HT/LT and Transformer center For BARANPURA SUB DIVISION and ANY S/Dn Of CFC

Lalbaug Division.

PR NO : 234274 TENDER ID: 601 / 26-27

Item Code No. Description of Work Unit Qty. Total value

REPLACEMENT OF FAIL TRANSFORMER & AUGMENTATION/DEAUGMENTATION OF

50 9908000049 TRANSFORMER(ANY CAPACITY) INCLUDING TRANSPORTATION & CREDIT OF OLD Number 1500 10

TRANSFORMER AT S/DN STORE

51 1501000024 M.S. Bolts & Nuts 65x16mm ( 2.5 X 5/8 INCH) KG 108.56 10

52 1501000031 M.S. Bolts & Nuts 180x16mm ( 7 X 5/8 INCH) KG 108.56 10

53 1501000038 M.S.Bolts & Nuts 300x16mm (12 X 5/8 INCH) KG 108.56 10

Proving & Fixing of HEAT SHRINKABLE TYPE CABLE JOINTING KIT SUITABLE FOR 11 KV

1C X 95 SQ MM AB CABLE FOR OUT DOOR TERMINATION APPLICATION

Proving & Fixing of HEAT SHRINKABLE TYPE CABLE JOINTING KIT SUITABLE FOR 11 KV

1C X 70 SQ MM AB CABLE FOR OUT DOOR TERMINATION APPLICATION

Installation of earhing pits as per drawing attached here with by providing 100 mm inner dia-meter

cast iron pipe of 13 mm thicknes & 3000 mm length. Work includes fabrication & fixing of GI

strips for earthing connections as per drawing attached. Excavated earth-pit should be filled by

mixture of coal / Charcoal, salt & sand up to top. Further this includes provid ind brick masonary

chambr of size 450mm x 450mm & depth up to 1000 mm as per instruction of Engineer in charge

including light type CI cover & applying 12 mm thick cement plasterin 1:3 inside &to all exposed

faces up to 3oo mm below, foundation level, curring etc. complete. Extra earth should be

removed away from the site S/S or refilling earthing pits if required. All required material for this

job such as CI pipe, cover with frame, salt, charcoal, sand cement gravel, bricks etc. to be

supplied by the contractor. Required bolts, nuts, washers, numberplates / painted plates also shall

be arranged by the contractor. Tentative quantity of salt & charcoal shall be 2.50 cu.m. DRG.NO:-

GETCO/E/4s-025/P-011,Revision-3 is attached

57 9911000071 PETROLING HT/LT LINE- PER POLE PER POLE 4 18

58 9911000190 RE-JUMPERING OF HT/LT LINE FOR SHACKLE POLE PER POLE 98 10

REPLACEMENT OF POLE MOUNTED 1PH / 3PH SERVICE CONNECTION BOX INCLUDING

RECONNECTING ALL CONNECTIONS

60 9911000189 Cutting of Tree branches obstructing HT/LT line on one tree PER TREE 60 10

61 9911000189 Cutting of bigger size of Tree branches / Whole tree obstructing HT/LT line 477 10

62 9911000229 PIN BINDING OF 11KV PIN INSULATOR PER POLE 47 12

63 9911000230 PIN BINDING OF LT LINE PIN OR SHACKLE INSULATOR PER POLE 47 10

64 9908000003 REPLACEMENT OF 11 KV DISC INSULATOR Number 171 10

65 9908000166 REPLACEMENT OF LT PIN /SHACKLE INSULATOR Number 37 10

66 9908000001 REPLACEMENT OF V CROSS - ARMS Number 244 10

67 9908000051 REPLACEMENT OF TOP FITTING Number 60 10

68 9908000007 REPLACEMENT OF LT CROSS - ARMS Number 79 9

PROVIDING DO FUSE OR AB SWITCH ON DP (FOR ONE SET) WITH FABRICATION &

COLOUR CODE JUMPER,INCLUDING PROPER ALIGNMENT OF AB SWITCH CONTACTS

NUMBERING THE POLE WITH PAINT BY PREPARING BACK GROUND OF REQUIRED

HEIGHT SURFACE OF ONE COLOUR AND HAVE LETTERING ( 2" & 3" HT ) AS DIRECTED

70 9911000001 BY IN CHARGE ENGINEER .THE TWO COLOUR SHOULD HAVE BEEN SLECTED AS TO Number 60 10

HAVE CONTRAST FOR PROPER READABILITY.(REQUIRED COLOUR TO BE PROVIDED

71 9911000222 FIXING OF SMC (1-Ph) AT CONSUMER INSTALLATION ( INCLUDING COST OF FASTNERS) Number 98 10

72 9911000223 FIXING OF SMC (3-Ph) AT CONSUMER INSTALLATION ( INCLUDING COST OF FASTNERS) Number 148 10

73 9908000023 REPLACEMENT OF METER (1 PH) WITH WIRING - Urban Number 58.13 10

Laying / Relaying of XLPE/PILC cable by digging of pit, removal of old cable & laying of new cable

74 9913000013 on sand bed. The trench should be filled with earth duly rammed upto ground level & old cable MTR 181 9

credited to store.

Additional charges for digging tar road for laying of cable over and above digging of pits in normal

76 9911000227 PROVIDING (PAINTING ) CONSUMER No ON SMC/MMB - Urban Number 11.842 10

Maintenance, Erection and Dismantaling of HT/LT and Transformer center For BARANPURA SUB DIVISION and ANY S/Dn Of CFC

Lalbaug Division.

PR NO : 234274 TENDER ID: 601 / 26-27

Item Code No. Description of Work Unit Qty. Total value

REPLACEMENT OF SINGLE PHASE OLD SERVICE BY NEW SERVICE INCL .SHORTFALL

REEL INSULATORS, EGG INSULATORS, NAILS, FIXING FASTNERS ETC.

78 9902040007 ERECTION/PROVIDING LIGHTENING ARRESTOR Number 123 10

REPAIRING/ADJUSTING TENSION OF EXISTING GUY/STAY SET INCLUDING

PROVIDING/REPLACEMENT OF STAY INSULATOR

REPLACEMENT OF OLD DISTRIBUTION BOX 200 KVA & ABOVE WITH MAKING ALL

CONNECTIONS CRIMPING OF LUGS,NEUTRAL ETC

REPLACEMENT OF OLD DISTRIBUTION BOX UP TO 100 KVA & ABOVE WITH MAKING

ALL CONNECTIONS CRIMPING OF LUGS,NEUTRAL ETC

82 9911000054 PROVIDING LINE SPACER BETWEEN LT LINE CONDUCTOR WITH BINDING Number 37 10

83 9908000050 REFITTING/REPLACEMENT OF LIGHTENING ARRESTORS Number 37 10

Maintenance, Erection and Dismantaling of HT/LT and Transformer center For BARANPURA SUB DIVISION and ANY S/Dn Of CFC

Lalbaug Division.

PR NO : 234274 TENDER ID: 601 / 26-27

Item Code No. Description of Work Unit Qty. Total value

84 9911000072 THREAD BURNING OF HT/LT LINE INCLUDING COST OF OIL AND BAMBOO ETC. Number 73 10

85 9911000010 REFIXING OF V CROSS ARM FITTING INPROPER POSITION Number 73 10

86 9911000226 REFIXING OF TOP FITTING INPROPER POSITION Number 49 10

87 9903000004 RESTRINGING OF ACSR/AAC SPAN Per Span 111 3

88 9911000224 RE-STRINGING OF 11KV A.B.CABLE (ALL SIZE) HT ABC ONLY Per Span 330 10

89 9911000225 RE-STRINGING OF DOG CONDUCTOR WITH NEW DOUBLE PIN BINDING Per Span 148 10

MOULDING OF CABLE JOINT FOR XLPE CABLE (STRAIGHT/INDOOR/OUTDOOR) URBAN

91 9908000451 Replacement of 11KV PIN insulator by new Pin Insulator /Composite Pin Insulator Number 56 10

92 9908000452 Straightening of tilted PSC/RSJ Pole at pin point Number 284 10

93 9908000453 Straightening of tilted PSC/RSJ Pole at tension point Number 329 10

94 9908000454 Straightening of tilted D.P. Set (PSC / Girder pole) etc with refilling of stones, morum etc. Number 810 10

Laying/Relaying of cable in Cable trench & from ground level to pole structure for providing

outdoor cable joints.

96 9903000009 Unbundaling of all size HT ABC KM 12029 15

97 9903000008 Stringing of all size HT ABC KM 6015 10

Excavation of trench 0.5 Mtr. Wide and 1 mtr. Deep for laying of HT/LT underground cable of size

upto 300mm2 PILC or XLPE. The cable should be liad on bed of sand and to cover cable with

98 9913000036 half round RCC pipe 6" internal dia and length of 1 mtr along with each bottom and top. The MTR 148 10

entire trench should threafter be refilled with earth duly rammed upto ground level. As per

Drawing no:MGVCL/Tech/UG cable/01/12-13

Maintenance, Erection and Dismantaling of HT/LT and Transformer center For BARANPURA SUB DIVISION and ANY S/Dn Of CFC

Lalbaug Division.

PR NO : 234274 TENDER ID: 601 / 26-27

Item Code No. Description of Work Unit Qty. Total value

Excavation of trench 0.75 Mtr. Wide and 1 mtr. Deep for laying of HT/LT underground

cable of size upto 300mm2 PILC or XLPE. The cable should be liad on bed of sand and

99 9913000023 to cover cable with half round RCC pipe 6" internal dia and length of 1 mtr along with Mtr. 219 5

each bottom and top. The entire trench should threafter be refilled with earth duly

rammed upto ground level. As per Drawing no:MGVCL/Tech/UG cable/02/12-13

Supply of sand 0.300x0.500X1.00mtr (Layer at bottom of cable trench approximately

0.15cmt) As perDrg.No MGVCL/Tech/UG Cable/01/12-13

101 0302000078 Supply & laying of RCC Half round Hume pipe [6" internal dia & each of 1mtr long] No. 100 5

102 9902050004 ERECTION OF CABLE JOINT FOR XLPE CABLE (STRAIGHT/INDOOR/OUTDOOR) Nos. 3258 5

103 9908000130 Labour charge for unskilled labour per day for digging cable and refilling No 524.5 5

TOTAL ESTIMATED AMOUNT Without GST IN RS

TOTAL AMT WITH GST

Bidder‟s offer (+/-) in % [B]

Grand Total [C=A+/-(A*B)

Grand Total [C=A+/-(A*B)

Goods & Service tax [D = C x GST %] (GST Rate :___%) SAC Code:

Grand Total including GST [E=C+D]

Grand Total including GST [E=C+D]

Final offer (in RS.)

Final offer (Rs. In words)

The bidder shall quote FIRM PRICES only. The prices quoted will not be subject to any escalation till completion of work.

The above prices are inclusive of all taxes, levies Duties etc. except Goods & Service tax (GST). GST will be paid extra as applicable from time to time on a given taxable goods

and/or services.

NOTE: Work for this order is for BARANPURA sdn and ANY SDN of CFC within the jurisdiction of Lalbaug division.

RATE INCLUSIVE/EXCLUSIVE OF GST SHOULD BE CLEARLY MENTIONED IN YOUR QUAOTATION(MENTION IT IN ONLINE

IN SCHDULE ''B'' MENSIONED QUANTIES ARE ESTIMATED. QUANTIIES MAY BE INCREASED OR DECREASED IN EVERY WORKS.

BUT ORDER VALUE WILL NOT BE CHANGED & PAYMENT WILL DONE AS PER ACTUL EXCUSION OF WORKS

In case any joint fails within one year due to poor workmanship,it should be replaced free of cost by you else, the charges for the same will be

deducted from your bill.

For laying of double circuit, both cables should be covered with separate RCC hume pipe of 6"diameter OR Provided HDPE Pipe for laying

11KV cable. Pipe should be 10mm thickness.

If the work of cable would not be started within six hours from verbal instruction of Engineer-in-charge from sub-division, the penalty will be

charged @ Rs.200/- per occasion.

SIGNATURE OF CONTRACTOR

(With Rubber Stamp & Date)