REPAIR MAINT OF OTM MD ACCN AND REPAIR TO SEWAGE LINE ST SOAKAGE WELL CLEANING OF MANHOLES SEWER LINES AND PERIODICAL SERVICES TO MD OTM ACCN AT NAINITAL UNDER GE RANIKHET

Amount

Complete removal of existing treatment on wall (Internal/ External)/ roof projections including facia, cornices etc (Internal surfaces by scrapping with mechanical sander (having mechanical vacuum mechanism) with sanding pad of appropriate grit to make surface clean, free from dust, loose paint etc) & (External surface by Jet washer) complete all as specified and directed.

M&L for preparation and applying minimum 1mm thick wall care putty over prepared surface and rubbing it with mechanical sander (having mechanical vacuum mechanism) to achieve the surface even and smooth for further application of finishes complete all as specified and directed.

M&L for applying two or more coats of 100% premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over any surfaces complete all as specified and directed.

M&L for applying two or more coats of acrylic interior emulsion paint, of approved manufacturer, of required shade and colour over a coat primer complete, as per manufacturer's specification complete all as specified and directed. Note- 1. Application of primer and distemper to be carried out through roller (Mechanical means). 2. Wall care putty (if required at site before application of above painting in certain portion) shall be done and same shall be measured and paid seperately under serial item No 02.

M&L for applying two or more coats of distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gms/ litre, of approved manufacturer over a coat of primer, of required shade and colour complete as per manufacturer's specification. Note- 1. Application of primer and distemper to be carried out through roller (Mechanical means). 2. Wall care putty (if required at site before application of above painting in certain portion) shall be done and same shall be measured and paid separately under serial item No 02.

M&L for one coat of white wash on old decorated surfaces of wall including preparation of surfaces by brooming down or steel, wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots complete all as specified and directed.

All as per item No 6 above but on ceiling, soffits of chajjas/ balcony etc complete all as specified and directed.

M&L for one coat of colour wash with using mineral colour on old decorated surface of external wall including preparation of surfaces by brooming down or steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots complete all as specified and directed.

All as per item Ser No-8 above but applying two coats of colour wash complete all as specified and as directed.

M&L for preparation of old decorated plastered or un-plastered surfaces of walls including cornices etc by brooming down steel wire brushing, scraping down smoke soot, moulds, mass and efflorescent salts and trading oil and greasy spots & removing of nails mark & applying one coat of cement base paint on wall complete all as specified and directed.

M&L for complete removal of existing treatment/ finishes from wall surfaces and applying two coat of cement base paint on old decorated/undecorated surfaces of walls complete all as specified and as directed.

M&L for applying one coat of oil bound distemper to old decorated surface of wall including preparation of surfaces complete all as specified and directed.

M&L for complete removal of existing treatment/ finishes from wall surfaces and applying two coats of oil bound distemper white or tinted on old decorated/ undecorated surfaces of wall complete all as specified and directed.

M&L for applying one coat of oil bound distemper to old decorated surface of ceiling to match the existing surface including preparation of surfaces complete all as specified and as directed.

M&L for preparation of old painted wooden surfaces of any description over 10cm in width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed.

M&L for preparation of old painted steel surfaces of any description over 10cm in width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed.

All as per item No 16 above but n.exc 10 cm in width or girth complete all as specified and as directed.

Taking down cement plaster on brick or stone wall/ concrete ceiling surface etc including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and as directed.

M&L for rendering 15mm thick in cement mortar 1:4 on fair faces of brick work or concrete surfaces, finished fair and even complete all as specified and as directed.

M&L for rendering 15mm thick on fair faces of brick work in CM 1:6 finished even and smooth without using extra cement complete all as specified and as directed

M&L for rendering 10mm thick in CM 1:3 on fair faces or concrete ceiling surfaces finished even and fair complete all as specified and as directed

M&L for preparing newly plastered surfaces of walls and applying two coats of distemper oil emulsion, over a coat of primer on wall complete all as specified and as directed.

M&L for preparing newly plastered surfaces of walls and applying two coats of cement based paint over a coat of primer on wall complete all as specified and directed.

Writing letters or figures (Block Roman, Italic or Indian) n exc. 30 cm high incl preparation of surface and making the base to receive letters by applying synthetic enamel paint and letters etc shall be painted with thick synthetic enamal paint complete all as specified and as directed

M&L for preparation of new steel surface of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

Demolition of cement concrete (unreinforced) in ground floors and pavings not exceeding 15 cm thickness (below or above ground level) complete all as specified and directed.

Demolition of cement concrete (unreinforced) of any description and in any position not other wise specifically provided for complete all as specified and directed.

Demolition of brickwork or stone/ boulder or precast PCC block masonry, built-in cement/ lime mortar including quoins, arches, pillars etc but excluding ashlar facing, dressed stonework and precast concrete arches complete all as specified and directed.

M&L for brick work using sub class ‘B’ old size bricks, straight or curved on plan exceeding 6m mean radius, built in CM 1:6 complete all as specified and directed.

M&L for except brick using sub class ‘B’ old size bricks, straight or curved on plan exceeding 6m mean radius, built in CM 1:6 complete all as specified and directed.

Demolition of reinforced cement concrete of any description and in any position not otherwise specifically provided for (reinforcement cut as required to facilitate demolition) complete all as specified and directed.

M&L for RCC 1:2:4 type B-1, (20mm graded aggregate) slab supported on walls, beams and columns in floors,roof, landing, balconies complete all as specified and directed.

Formwork to soffits of suspended slabs such as roof slab, floor slabs landings and sgh finished surfaces of concrete flat complete all as specified and directed.

M&L for mild steel TMT bars, 10mm dia and over, cut to length, bent to shspe required incl cranking, bending spirally for hooping for coloumns, hooking ends andbionding with (annealed) not less than 0.90 mm dia complete all as specified and directed.

M&L for 16 to 18mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete including screed bed 15mm thick in CM 1:4 complete all as specified and directed.

Dismantling floor, hearth, wall tiling including taking down plastering in cement mortor removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.

Roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust etc. complete all as specified and directed.

M&L joint free non - skid coloured ceramic tiles 7 to 10 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry including screed bed of 15 mm thick in cement mortar 1:6 and pointed in white or coloured cement to match complete all as specified and directed.

M&L joint free non - skid coloured ceramic tiles 7 to 10 mm thick (square/ rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry including screed bed of 15 mm thick 1:6 and pointed in white or coloured cement to match complete all as specified and directed.

M&L joint free non - skid coloured ceramic tiles 7 to 10 mm thick (square/ rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.36 sqm in skirting/ dado or verticle surfaces including 10 mm thick rendering in cement mortar 1:4 and pointed in white or coloured cement to match complete all as specified and directed.

M&L glazed coloured ceramic tiles in verticle surfaces 450 x 300 x 7mm thick set and jointed in neat cement slurry and pointed in coloured cement to match including 10 mm thick rendering in cement mortar 1:4 and pointed in white or coloured cement to match complete all as specified and directed.

M&L vitrified ceramic tiles 8 to 10 mm thick light shade (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and hite or coloured cement to match not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry including screed bed of 15 mm thick in cement mortar 1:6 and pointed in white or coloured cement to match as in floor etc complete all as specified and directed.

M&L vitrified ceramic tiles 8 to 10 mm thick light shade (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in vertical surface etc. set and jointed in neat cement slurry and hite or coloured cement to match not exceeding 0.36 sqm but including 10mm thick rendering in cement mortar 1:4 on vertical surfaces/skirting complete all as specified and directed.

M&L for cutting chases, pinning in, making good to facing where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades shelves, lintels etc, and cutting chases for concealed water tubing or concealed conduit wiring etc and making good, cutting not exc 10cm girth complete all as specified and directed.

Taking up or down GI tubing 15mm bore dia and connections, including cleaning for re-fixing complete all as specified and directed.

Taking up or down GI tubing 20mm bore dia and connections, including cleaning for re-fixing complete all as specified and directed.

Taking up or down GI tubing 25mm bore dia and connections, including cleaning for re-fixing complete all as specified and directed.

M&L for 15mm bore dia GI tubing, medium grade, galvanised with and including all GI fittings and fixed complete to walls and ceiling or laid in floors complete all as specified and directed.

M&L for 20mm bore dia GI tubing, medium grade, galvanised with and including all GI fittings and fixed complete to walls and ceiling or laid in floors complete all as specified and directed.

M&L for 25mm bore dia GI tubing, medium grade, galvanised with and including all GI fittings and fixed complete to walls and ceiling or laid in floors complete all as specified and directed.

S&F in repair 15mm bore dia CP bib tap, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed.

S&F in repair 15mm bore dia CP fancy type long body bib tap, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed.

S&F in repair 15 mm bore dia fancy type pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and directed.

S&F in repair brass chromium plated basin mixer for mixing hot and cold water screwed down for iron pipe and fixed complete all as specified and directed.

S&F in repair 15 mm bore dia brass CP wall mixer for mixing hot & cold water (3 in 1) screwed down for iron pipe and fixed complete all as specified and directed.

S&F in repair 15 mm bore dia fancy type, chromium plated, stop valves, with long shank and cup (concealed type) cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed.

S&F in repair 15 mm bore dia fancy type, chromium plated, angle cock, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed..

S&F in repair 50mm bore dia CP waste fittings, brass chromium plated for glazed ware sinks, basins, etc, with long screwed shanks and fly nuts, flange end based in red lead cement complete all as specified and directed.

S&F PVC waste pipe 32mm dia of cup with over all length of pipe 90cm complete all as specified and directed.

S&F PVC waste pipe 40/50 mm dia of cup and over all length of pipe 90cm complete all as specified and directed.

S&F in repair brass chromium plated shower rose 125mm size with shower arm, including fixing to steel pipe or union complete all as specified and directed.

S&F CP brass soap dish complete all as specified and directed.

S&F toilet paper holder with flat recessed type stainless steel complete all as specified and directed.

S&F peg set of 6 with base plate stainless steel complete all as specified and directed.

S&F corner glass shelf 300mm (with ABS Brackets) 300 x 600mm complete all as specified and directed.

S&F in repair brass chromium plated tubular towel rail 20 mm dia D type, 60 cm long between flanges complete all as specified and directed.

S&F in repair vitreous china squatting pan, Orissa pattern including CI trap, size 580 x 440 mm white, with integral foot rests squat pattern closet also includes setting the trap and pan in lime concrete (1 lime, 2 sand or surkhi and 5 aggretate), min. 150mm thick all round and finished just below level of rim of pan to receive the floor finishing (thickness as indicated) and making good floor complete all as specified incl cutting to the flush pipe and necessary repair to the floor complete all as specified and directed.

S&F vitreous china wash down water closet pan (pedestal pattern), white (including fixing bolts & flush pipe, plastic water closet seat,black, closed pattern with bottom, and cover and mild steel chromium plated or aluminised hinging device etc.) complete all as specified and directed.

S&F one piece floor mounted vitreous china EWC with integrated flushing cistern, soft closing seat cover and necessary nut/ bolt for fixing complete all as specified and directed.

S&F hand shower (health faucet) CP brass 15 mm bore with 1 meter long easy flex tube in chrome finish and wall hook with NRV (Back Flow Preventer) complete all as specified and directed.

S&F PVC flushing cistern 10 litre capacity, low level valve less, symphonic action type, white, with Inlet, ball valve, float and handle including 32mm dia PVC Flush pipe, a pair of MS brackets,CP flush bend including cutting and pinning in ends, making good disturbed surfaces in cement mortar 1:3 including taking down unserviceable flushing cistern and connected Items of any description complete all as specified and directed.

S&F in repair vitreous china wash basin, white, flat back, size 550mm x 400mm, including brackets, PVC waste pipe 32mm dia, waste coupling brass, chromium plated and including cutting for and pinning in ends of brackets or erecting stand, fixed complete all as specified and directed.

S&F wash hand basin of vitreous china counter sunk size 560mm x 410mm x 180mm, PVC waste pipe 32mm dia, waste coupling brass chromium plated and including cutting complete all as specified and directed.

S&F sinks made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or includingfixing cantilever brackets and connecting union to pipe, overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm complete all as specified and directed.

S&F sinks with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm complete all as specified and directed.

S&F stainless steel plate rack of size 24 x 30 x 10 inch of best quality including necessary stain less steel screws, rawl plugs and washers complete all as specified and directed.

S&F in repair 15 mm Bib tap standard of PTMT any colour high pressure screwed for iron pipe and fixed (Minimum weight 90gms) complete all as specified and directed.

S&F in repair stainless steel grating 100mm dia complete all as specified and directed.

S&F in repair stainless steel grating 125mm dia complete all as specified and directed.

S&F in repair PVC connections 15mm size with PTMT Nuts of length 450mm and fixed, complete all as specified and directed.

S&F in repair PVC connections 15mm size with PTMT Nuts of length 600mm and fixed, complete all as specified and directed.

Dismantling of CI/ PVC pipe 100mm dia jointed in cement mortar and taking out of trench if required complete all as specified and directed.

Dismantling of CI/ PVC pipe 75mm dia jointed in cement mortar and taking out of trench if required complete all as specified and directed.

S&F in repair 110 mm bore PVC (SWR) soil, waste and vent pipes single socketed including necessary fittings like socket, bend, elbow, single/ double tee etc in any length with rubber ring joints fixed with clamps of flat iron and including bolts and nuts and securing ends of stays to wall or roof and making good with cement mortor 1:3 or with PCC 1:2:4 complete all as specified and directed.

S&F in repair 110 mm bore PVC (SWR) soil, waste and vent pipes single socketed including necessary fittings like socket, bend, elbow, single/ double tee etc in any length with rubber ring jointsin trenches or in floors complete all as specified and directed.

S&F in repair 75 mm bore PVC (SWR) Soil, waste and vent pipes single socketed including necessary fittings like socket, bend, elbow, single/double tee etc in any length with rubber ring joints fixed with clamps of flat iron and including bolts and nuts and securing ends of stays to wall or roof and making good with cement mortor 1:3 or with PCC 1:2:4 including finishing to match with existing surface complete all as specified and directed.

S&F in repair 75 mm bore PVC (SWR) soil, waste and vent pipes single socketed including necessary fittings like socket, bend, elbow, single/ double tee etc in any length with rubber ring jointsin trenches or in floors complete all as specified and directed.

S&F cabinet mirror 400 x 500 mm hanging system and clamps support complete all as specified and directed.

Taking down chowkats or frames n.exc 1.50 sqm each with shutters (without taking off shutters from the frames) complete all as specified and directed.

Taking down chowkats or frames exc 1.50 sqm but n.exc 4.00sqm each with shutters (without taking off shutters from the frames) complete all as specified and directed.

Taking down shutters of any description exc 1 sqm but not exc 2Sqm each complete all as specified and directed.

S&F factory made Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification complete all as specified and directed.

S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification complete all as specified and directed.

S&F powder coated anodised aluminium frame for doors, windows ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified and directed.

S&F powder coated anodised aluminium door shutters, aluminium section weighing 0.55kg/m including necessary joining cleats, glazing clips, rubber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminium snap beading, screws etc complete all as specified and directed.

S&F powder coated aluminium windows and ventilator shutters,sliding or fixed type without sash bars, aluminium section weighting 0.55 kg / m including necessary joining cleats, glazing clips, roller, rubber packing, anodised aluminium snap beading , screws, anodised aluminium fitting such as peg stays hinges, handle, locking device, louvers, rollers etc. complete all as specified and directed. (Note:- Glass pane and mesh will be measured and paid separately )

S&F powder coated designer grill of 5.5 mm dia and aperture of 75 mm fixed with and including aluminium powder coated flat section of size 50 x 1.5 mm complete all as specified and directed.

S&F 4.8mm thick sheet glass, ordinary quality and glazing with oil putty in square exc 0.5 sq. m in each pane complete all as specified and directed.

S&F aluminium sheet powder coated of thickness not less than 5mm thick to be in sealed as panel in aluminium door including fixing complete all as specified and directed.

S&F double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty incl making hole and fixing with cement complete all as specified and directed.

S&F for door closer aluminium extruded section hydraulically regulated, designation No 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80kg and fixed complete all as specified and directed.

Hacking out old broken glass (any thickness, size, quality or description) from metal frames incl punching or drilling out glazing pins/ spring clip and providing and fixing new ones complete all as specified and directed.

S&F 3mm thick sheet glass, ordinary quality and glazing with oil putty in squares n exc. 0.5Sqm in each pane complete all as specified and directed.

S&F 3 mm thick figured glass pin headed type and glazing with oil putty in square n. exc 0.5 sqm in each pane complete all as specified and directed.

S&F in repair galvanised mild steel wire cloth, 0.56 mm nominal dia of wire and average width of aperature 1.18 mm and fixed with alluminium staple and around all beading complete all as specified and directed.

S&F 35mm thick flush shutters, solid core construction, with block board core and plywood face panesls, commercial type on bothe sides complete all as specified and directed.

M&L for 0.9mm thick decorative laminate type 1 of surface finish, colour and patters as approved, fixed with approved adhesive as per manufacturer's insturctions, complete all as specified and directed.

S&F galvanised mild steel wire cloth, 0.56 mm nominal dia of wire and average width of aperature 1.18 mm and fixed with alluminium staple and around all beading complete all as specified and directed.

S&F 2nd class hard wood plain solid straight chowkats and frames wrought framed rebated on the solid rounded or chamfered put together with glue pinned at joints complete all as specified and directed.

M&L for PCC 1:3:6 type C-1 (using 20mm graded stone aggregate) for bed block for fixing hold fast complete all as specified and directed.

M&L bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required: hooks (stay), heavy, for large gates; hook and pintle hinges: large hasps and staples; chains; hand made sliding bolts; clamps; hold fasts; wall ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way and three way straps, plate washers and similar small articles conforming to Fe-290 Gde-E-165 complete all as specified and directed.

S&F 35mm thick plain, frame 2nd class hard wood panelled shutter (any no of panels) with panels of timber flat on both sides (feather edged) or of veneered particle board medium density, wood particle board with commercial face veneers complete all as specified and directed.

S&F 35 mm thick 2nd class hard wood (shisham) glazed and skelton shutter open rebated and prepared to receive glass, gauge etc,(with out sash bars) edges of framing plain chamfered or rounded fitted with cut or mitred beads for securing glass etc. size of members of shutters as specified in SSR Part-I, Sec-8, clause 8.23(a) complete all as specified and directed.

S&F in repair 18mm thick veneered decorative plywood, grade - 1 (with BWR resin) with decorative face venners on both faces fixed with screws to timber frame work, colour and pattern as approved complete all as specified and directed.

S&F 2nd class hardwood small fittings such as brackets of any type, latch and hinge blocks, shaped door and widnow stops and the like, including all necessary labour; articles n exc 200 cu. cm each complete all as specified and directed.

S&F push to open magnetic catches for kitchen cabinet doors complete all as specified and directed.

S&F width of flaps ( when open) 30mm continuous (piano) hinges, mild steel, bright finish or electro galvanised complete all as specified and directed.

M&L for welding of steel member of steel indow/ventilator,door hinges and other sections as per requirment length of each welding upto 5 cm, making the window and ventilator operational incl provn of all necessary members viz hinges, handle, locking slot etc complete all as specified and directed.

S&F in repair stainless steel decorative tubular curtain rail of 25mm dia incl six nos curtain ring per running mtr and one number of brackets on each end and one no of globe on each end of the rod per opening of door / window (make and materail approved by Engineer-in-charge) complete all as specified and directed.

S&F 250 mm long aluminium alloy, anodised, sliding door bolt with haps, staple (bolt type) and fixing clips with sheet, cast and extruded section and fixing bolt and sliding bolt of extuded sections or cast aluminium alloy and fixed complete all as specified and directed.

S&F 300 mm long aluminium alloy, anodised, sliding door bolt with haps, staple (bolt type) and fixing clips with sheet, cast and extruded section and fixing bolt and sliding bolt of extuded sections or cast aluminium alloy and fixed complete all as specified and directed.

S&F 150 mm overall length floor stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor complete all as specified and directed.

S&F mild steel 300mm, ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and directed.

S&F aluminium handle, cast type anodized 100mm size complete all as specified and directed.

S&F aluminium handle, cast type anodized 150mm size complete all as specified and directed.

S&F as in repair hasp and staple 150mm size of aluminium anodised complete all as specified and directed.

S&F 150 mm long aluminium anodized barrel tower bolts of extruded section complete all as specified and directed.

S&F 200 mm long aluminium anodized barrel tower bolts of extruded section complete all as specified and directed.

S&F mild steel of 100mm long butt hinges medium weight cold rolled complete all as specified and directed.

S&F stainless steel of 100mm long butt hinges medium weight complete all as specified and directed.

S&F mild steel of 50mm long butt hinges medium weight cold rolled complete all as specified and directed.

Taking down cement plaster on brick or stone wall/ concrete ceiling surface etc raking out joints hacking for key scrabbing down water etc including taking out/removal of the all the tree routes from the brick surface/ concrete surface complete all as specified and directed.

M&L for 15mm thick cement plaster in CM 1:4 on fair faces of brick or concrete surfaces using WPC where ever required as per manufacturerer's instructions and finishing the surface even and smooth without using extra cement complete all as specified and directed. Note: - WPC shall be measured and paid separetely.

M&L for rendering 15mm thick on fair faces of brick work in CM 1:6 finished even and fair without using extra cement complete all as specified and directed.

M&L for rendering 10mm thick in CM 1:3 on fair faces or concrete ceiling surfaces finished even and fair without using extra cement complete all as specified and directed.

Supply only integral waterproofing compound complete all as specified and directed.

M&L for preparationof old decorated wooden surfaces of girth exc 10 cm and applying one coat of synthetic enamel paint complete all as specified and directed.

M&L for preparation of new wooden surfaces exc 10 cm width or girth and applying two coats of synthetic eneamel painting over a coat of pink primer complete all as specified and directed.

M&L for preparation of new plastered or unplastered surfaces of walls and applying two coats of distemper oil emulsion paint complete all as specified and directed.

M&L for preparation new plastered or unplastered surfaces of ceiling and applying two coats of distemper oil emulsion paint complete all as specified and directed.

M&L for preparation of old decorated surface of wall to match the existing surface and applying one coat of oil bound distemper complete all as specified and directed.

M&L for preparation of newly plastered surfaces and applying two coats of cement base paint over a coat of primer complete all as specified and directed.

M&L for preparation of old decorated plastered or unplastered surfaces of walls including cornices etc by brooming down stell wire brushing, scraping down smoke soot, moulds, masss and efflorscent salts and trading oil and greasy spots & removing of nails mark and applying one coat of cement base paint complete all as specified and directed.

M&L for providing PCC 1:2:4, type B-0 (using 12.5mm graded stone aggregate) as in roof kerbs or mud stops rouded or chamfered on edges complete all as specified and directed.

Dismantling water tanks of capacity exc 250 but not exc 500 ltr capacity complete all as specified and directed.

S&F rotational moulded polythene water storage tanks tripple layer (cylindrical vertical with closed top) hoisted and fixed in postion 500 ltrs capacity with and including 20mm dia ball valves, high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe minimum weight 210 gram complete all as specified and directed.

Dismantling water tanks of capacity exc 500 but n.exc 1000ltrs complete all as specified and directed.

S&F rotational moulded polythene water storage tanks tripple layer (cylindrical vertical with closed top) hoisted and fixed in postion 1000 ltrs capacity with and including 20mm dia ball valves, high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe minimum weight 210 gram complete all as specified and directed.

M&L for 75 mm thick PCC 1:4:8, type D-2, using 40 mm graded aggregates as in sub base finished even and rough complete all as specified and as directed.

Dismantling plain or corrugated steel sheeting, any gauge, thickness as in roof coverings complete all as specified and as directed

S&F 0.63mm thick galvanized corrugated mild steel sheeting with two corrugations side lap, fixed with L-type or J-type or cranked hook bolt and washers in roofs, walls etc. with grade of zinc coating 275, class 8 sheet complete all as specified and as directed.

S&F 0.63 mm thick plain galvanized mild steel sheeting as in ridges, valley gutters etc using, class 8 sheets complete all as specified and as directed

Fixing only galvanised plain/ corrugated steel sheeting in 0.63mm thick with two corrugations side lap, fixed with L-type or J-type or cranked hook bolt and washers in roofs, walls etc but except sheets complete all as specified and directed.

S&F of 0.63 mm thick plain galvanised iron steel (PGI) sheeting including cover gola of same thickness PGI sheet as in Nainital or similar pattern roof covering ( to be provided as per the existing pattern to match with same side by side) fixed with flat iron clip of size 20x3 mm complete all as specified and directed.

Dismantling of wall and ceiling boards (fibre, pulp, insulation, etc.) any thickness, including cover fillets but without frame work complete all as specified and as directed.

S&F powder coated GI snap grid frame work for false ceiling comprising of the following sections for making partitions of 605x605 mm size fixed to walls with rawl plugs & screws and hanged to roof with and including 2mm dia GI wire suspender of suitable length and butterfly clips, size of main tee shall be 37mm x 24mm x 0.3 mm thick, cross tee shall be 28mm x 24mm x 0.3mm thick and wall angle shall be 24mm x 24mm x 0.3 mm thick complete all as specified and directed.

S&F 4mm thick non asbestos E-board classic cememt building board for insulation and accoustic purpose, 600 x 600 mm size fixed with staples on snap grid as in ceiling complete all as specified and directed.

S&F PVC panelling made up of PVC hollow panels 25/30cm in width and 10cm thickness interlocking pattern of approved shed and design, fixed to wall for ceilling all as per the manufacturer instruction, fixed in repair ceiling complete all as specified and directed.

Cleaning of blocked / chocked sewer / sewage line of any description (SGSW / RCC / CI pipe) of 100mm / 150mm / 200mm dia and any depth by rodding or by mechanical means and well flushing the complete sewer line from manhole to manhole or from cleaning eye to next manhole to the entire satisfaction of Engineer-in-Charge with and including taking out and re-fixing of manhole covers whre required complete all as specified and as directed.

Removing the existing manhole covers & cleaning of manhole of any description & size upto 1 mtr in depth including lifting up and removing sludge & accumulated solid/semi solid sludge and any other foreign material with proper equipments & washing down with water for smooth functioning of sewage line all as directed incl disposal of sludge / containted works Out side the defence area to a place designated for the same by the civil authrities for dumping of sludge / contement water after cleaning incl covers to be put back to its place complete all as specified and as directed.

Removing the existing manhole covers & cleaning of manhole of any description & size exceeding 1M and not exceeding 1.5M in depth including lifting up and removing sludge & accumulated solid/semi solid sludge and any other foreign material with proper equipments & washing down with water for smooth functioning of sewage line all as directed incl disposal of sludge / containted works Out side the defence area to a place designated for the same by the civil authrities for dumping of sludge / contement water after cleaning incl covers to be put back to its place complete all as specified and as directed.

Removing the existing manhole covers & cleaning of manhole of any description & size exceeding 1.5 M In depth including lifting up and removing sludge & accumulated solid/semi solid sludge and any other foreign material with proper equipments & washing down with water for smooth functioning of sewage line all as directed incl disposal of sludge / containted works Out side the defence area to a place designated for the same by the civil authrities for dumping of sludge / contement water after cleaning incl covers to be put back to its place complete all as specified and as directed.

Removing the existing covers of septic tank & cleaning the same of any size / capacity b dewatering and taking out sludge in liquid, mud, silt or in solid state after emptying the water by manual or by mechanical means and removing the sludge complete all as specified and directed incl disposal of sludge / containted works Out side the defence area to a place designed for the same by the civil authrities for dumping of sludge / contement water after cleaning incl covers to be put back to its place complete all as specified and as directed.

Removal of blockage from WC by using rubber cup 125mm dia with wooden handle and clearing the blockage up to manhole with cleaning rod including removal of all materials from P trap of WC complete all as specified and as directed.

Removal of blockage from traps of kitchen/ bathroom/ WHB by using rubber cup 125mm dia and clearing the blockage up to gully traps with cleaning rod including removal of all materials from floor trap and disposing off complete all as specified and as directed.

M&L for precast reinforced cement concrete 1:2:4 type B-1 using 20mm graded stone aggregate in cover slabs (for manholes etc), shelves and similar articles with plain faces including necessary moulds and setting in cement mortar 1:6 including necessary form work complete all as specified and directed.

M&L for PCC 1:4:8, type D-2 using 40mm graded stone aggregate as in foundations, filling and mass concrete complete all as specified and directed.

M&L for PCC 1:3:6, type C1 using 20mm graded stone aggregate as in copings, bed plates etc. including necessary form work complete all as specified and directed.

Excavation in trenches not exc. 1.50m wide and not exc. 1.50m in depth for foundation etc or for manholes cesspits, shafts etc not exc 10 sqm on plan and getting out in hard/ dense soil complete all as specified and directed.

Excavation in trenches not exc. 1.50m wide and exc 1.50m depth but not exc 3.00m depth for foundation etc or for manholes cesspits, shafts etc not exc 10 sqm on plan and getting out in hard/ dense soil complete all as specified and directed.

Removing excavated soil to a distance n.exc 50m where directed at a level n.exc 1.50m above the starting point complete all as specified and directed.

Returning filling, in including spreading, levelling, watering and levellng and well ramming in layers not exc 25 cm compleate all as specified and directed.

Demolition and breaking up drain pipes (SGSW, AC or RCC) of internal dia 150mm, set in cement mortar compleate all as specified and directed.

M&L for cement concete 1:4:8 type D-2 (using 40mm graded crushed stone aggregate) as in bed to drain pipes of 160mm bore including packing under and haunching against the sides of pipe after they are laid and tested complete all as specified and directed.

M&L for unplasticised PVC pipe 160mm dia type 'B' with wall thickness 4mm (Min) of pressure rating 4 KN/Sqm laid in trenches and jointed with cement solvent including testing complete all as specified and directed.

Cutting into existing manholes for connecting new drains, making good to pipe and rendering cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concret 1:2:4 type B-1 smooth finished, and reforming benching as required, for internal dia of pipe 160mm complete all as specified and directed.

S&F in repair 110 mm bore dia PVC bend complete all as specified and directed.

S&F in repair 75 mm bore dia PVC bend complete all as specified and directed.

S&F in repair 110 mm bore PVC (SWR) junction single, (Single T) equal or unequal in complete all as specified and directed.

S&F in repair for PVC (SWR) floor/ nahani trap 75 mm bore dia outlet, plain with grating including jointing with solvent cement to waste pipe, fixed in cement concrete type B-1 (1:2:4) complete all as specified and directed.

Cleaning of water tank of capacity not exc 250 ltrs removing all scale and dirt etc. by brushing with iron brushes, removing green algae etc. by using bleaching powder, all from tanks and from mouths of circulating pipe etc. complete all as directed by Engineer -in- Charge. (Note :- The Contractor will write date of cleaning on tank as directed by Engineer-in-Charge.)

Cleaning of water tank of capacity exc 250 ltrs but not exc 500 ltrs removing all scale and dirt etc. by brushing with iron brushes, removing green algae etc. by using bleaching powder, all from tanks and from mouths of circulating pipe etc. complete all as directed by Engineer -in- Charge. (Note :- The Contractor will write date of cleaning on tank as directed by Engineer-in-Charge.)

Cleaning of water tank of capacity exc 500 ltrs but not exc 1000 ltrs removing all scale and dirt etc. by brushing with iron brushes, removing green algae etc. by using bleaching powder, all from tanks and from mouths of circulating pipe etc. complete all as directed by Engineer -in- Charge. (Note :- The Contractor will write date of cleaning on tank as directed by Engineer-in-Charge.)

S&F 20 mm ball valves high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe (Minimum weight 142gms) complete all as specified and directed.

Dismantling boarding, any description, fixed in any position with nails complete all as specified and directed

Dismantling of timber scantling 40 Sqcm and over in section in any position as in framed work complete all as specified and directed

M&L for earth filling under floor including supply of suitable earth/ soft/ disintegrated rocks for filling from out side including spreading and levelling watering and well ramming in layers n.exc 25cm complete in hard/ dense soil as specified and directed

S&F in repairs parquet flooring 8.3mm thick hard board plank both side laminated with decorated surface and approved by GE laid above the thermoplastic sheet complete all as specified and directed

S&F 25 mm ball valves high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe (Minimum weight 210gms) complete all as specified and directed.

om enterprises

Ramsons

M/s JS Constructions

SS Construction Co