PROVN OF GALVALUME SHEET IN LIEU OF AC SHEETS AT OTM BLDG NO T-12, 13,14, 15, 17, 41, 59 AT ZONE 1, 1A AND PROVN OF APPROACH PATHWAY IN OTM AREA NEAR CERTAIN BLDG AT 4 CSR UNDER GE (S) TEZPUR

Amount

Surface dressing n.exc 15 cm deep for soft / loose soil, complete all as specified and as directed.

Excavation in trenches n.exc 1.5 m wide and n.exc 1.5 m deep for sewage pipe line etc. and getting out in soft/loose soil all as specified and as directed by Engr-in-Charge.

Returning, filling in, including spreading leveling watering and well ramming in layers n,exc 25 cm thick in soft /loose soil for sewage pipe line /manhole and cleaning the site complete all as specified and as directed.

Removing excavated materials n.exc 50 mtr and depositing where directed at level n.exc 1.5 mtr above the starting point complete all as specified and directed.

Dismantling asbestos cement corrugated semi corrugated etc sheets in roof covering, complete all as specified and as directed.

Dismanting timber scantling 40 Sqcm and over in secion in any position in framed work or unframed work, complete all as specified and as directed.

M&L 2nd class HW in scantling fixed clean swan in framed work, complete all as specified and as directed.

M&L second class hardwood Weather boarding, 20mm thick, wrought both sides and edges shot and chamfered including dismanting of any description fixed in any position, complete all as specified and as directed.

M&L for 20mm thick second class hard wood boarding fixed with nails; planned, both sides, with butt joints as in eaves board complete all as specified and directed.

Dismantling Structural steel work includings door, gates, etc and similar works complete all as directed

S&F steel work in tubular truss of different size bend to shape, cut to length etc, including necessary welding,special shape washer, conforming to IS:1161-1998 grade St-240, complete all as specified and as directed.

S&F Joist, channel, angle, or tee sections, fixed independently, without connecting plates, etc. for roof trusses, purlines, rafter etc Fe 410-W (Gde E- 250) quality A complete as directed by Engineer in Charge.

S&F Mild steel screw bolts 5 to 10 mm dia (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, n exc 5cm long, complete all as specified and as directed.

Mild steel plates, plain or chequered, 5mm thick or over in thickness in available sizes for base plates and cleats Fe 410-W (Gde-E 250) qua lity-A complete all as specified and directed by Engineer-in-charge

Refixing only steel truss, rafter and purline of different size bend to shape, cut to length etc, including necessary welding, special shape washer, as directed by Engineer in Charge.

S&F pre-painted galvalume aluminium zink coating GI based corrugated steel sheet 0.50 mm thick of an colour having tensile stenght of 550 MPA as in roof covering /cladding to wall, fixed with self tapping screws, complete all as specified and as directed.

S&F pre-painted galvalume aluminium zink coating GI based plain steel sheet 0.50 mm thick of an colour having tensile stenght of 550 MPA as in roof covering /cladding to wall ridge,eaves board valley fixed with self tapping screws, complete all as specified and as directed.

Dismanting wall /ceiling board (Fibre pulp insulation) or insulation boards any thickness including cover filters, complete all as specified and as directed.

S&F Exposed GI powder coated snap grid frame for false ceiling 600x600mm size of wall angle 25x25x0.25mm size of cross tee and main tee 26x24x0.25mm and 32mm x 24mm x 0.25mm with 1.5mm dia double GI suspentor including supply and fixing of 4mm thick E Board decorative type in false ceiling including fixing arrangement from steel tress any type of tress, complete all as specified and as directed.

M&L preparation of old painted wooden surfaces over 10cm width or girth and applying one coat of synthetic enamel paint, complete all as specified and as directed.

Taking down cement plaster, of any description on brick or stone walls, etc including racking out joints, hacking for key, scrubbing down with water , complete all as specified and as directed.

M & L, 15mm thick rendering in C.M. (1:4) on fair faces of brick work finished even and fair without using extra cement , complete all as specified and as directed.

M & L, 10mm thick rendering in C.M. (1:6) on brick work finished even and smooth without using extra cement , complete all as specified and as directed.

M&L for Old wall surface including properly including removal of existing paint surface and fillings the cracks with exterior wall care putty and applying one coat of weather coat Acrylic exterior paint, complete all as specified and directed.

M&L for Preparation of newley plastered on concerte surface method and applying two coats of exterior emulsion paint(Apex) over one coat of priming coat of damp seal over a coat of thin layer of putty after complete removal of existing treatment of wall surface, complete all as specified and as directed.

M&L one coat of white wash on ceiling and cornices including preparation of old plastered or un plastered of surafce of ceiling by brooming down or steel wire brushing ,srcaping down smoke soot ,moulds ,moss and efflorescent salts and trading oil and greasy spot, complete all as specified and as directed.

M&L Applying one coat of Oil bound distember by smart painting method to old wall surfaces of walls and cornices including preparation of old plastered or un plastered of surafce of wall by brooming down or steel wire brushing ,srcaping down smoke soot ,moulds ,moss and efflorescent salts and trading oil and greasy spot, complete all as specified and as directed.

M&L Applying two coats of Oil bound distemper by smart painting method to newly plastered/previously untreated wall over a coat of 1 mm layer wall care putty over a coat of primer including preparation of newly platsered wall , complete all as specified and as directed.

M&L for applying for preparation of old painted surfaces of old painted steel surfaces and iron surfaces pf any description ,over 10cm width or girth incl and applying one coat of synthetic enamel paint, complete all as specified and as directed.

M&L preparation of new wooden surfaces over 10cm width or girth and applying two coats of synthetic enamel paint over one coat of pink primer, complete all as specified and as directed.

M&L for preparation of new steel surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

M&L for two coats of synthetic enamel paint over one coat of red oxide onsteel surfaces n.exc. 10cm width or girth including preparation of new surfaces, complete all as specified and as directed.

S&F Wire netting of galvanised steel wire 0.71mm dia fixed with tinned tacks of wire staples fixed in wooden frames with screws, complete all as specified and as directed.

M&L Plain fillets in 2nd class hardwood exc 6 but not exc 13 sqcm. square, rectangular or triangular in section, clean sawn, secured with nails or brads, complete all as specified and as directed.

Material and labour for old size bricks/ bricks, straight or curved on plan exc 6 m mean radius built in cement mortar ( 1:4) having compressive strenght not less than 75 kg/Sq cm all as specified and directed.

M & L for brickwork with sub-class 'B' bricks straight or curved on plan exc. 6m mean radius in half brick work built in cement mortar (1:4) complete all as specified and as directed.

Demolition of Cement Concrete of any description in any position not otherwise specifically provided for etc complete all as specified and directed by Engineer-in-Charge.

M/L PCC 1:3:6 type C1 20mm grade aggregate as in sub base ,coping or similar work, complete all as specified and as directed.

M&L for 75 mm thick PCC 1:3:6 type C2 using (40 mm graded aggregate) as in path plinth protection layers including filler joints using sealing compound with cement and bitumen (1:3) complete all as specifed and as directed.

M & L for Hard core of guage not exc 63 mm with broken stone or boulder deposited spread & levelled in layers n.exc 15cm thick, watered & ramed to a true surface, complete all as specified and as directed.

Sand Filling under floors/cushion or in foundations including watering and consolidation as directed by Engr -in-Chrage.

M&L Machine pressed precast concrete interlocking paver block (Glazed finish of any colour/patern )with Grey cement and pigment top surfaces treated by antifungal paint any shape any size of 60 mm thickness, M-30 Grade complete all as spedified and directed.

M&L for chequered cement concrete tiles of size 30 cm x 30 cm x 25 mm thick with with cement and pigment treated with antifungal paint set and jointed and pointed in neat cement slurry with pigment in floors laid over & including 15 mm thick screed bed in cement mortar 1:6 all as specified and as directed.

Supply and fix, 110mm bore PVC (SWR)pipe single socketed with rubber ring joints fixed to walls or laid in trenches or floor all as specified and directed. Note 1:-The contract sum shall be arraived at after deducting amount of schedule of credit from the total quated amount. Note 2-Contractor's supervisor and main worker would wear shirt/T-shirt of colour sky blue/brown/yellow preferable embosed with contractor's firm name while carriying out any activities in defence area for better check of security purpose. Note 3:-The tenderer (all eligible contractors) shall ascertain the taxes & levies as on date. The subject tender caters all the taxes & levies as on date including the latest notification of GST issued as on date ( issued by Central Board of Indirect Taxes and Customs)

M/S Jiban Krishan Das and Co

AVASANA SOLUTIONS PRIVATE LIMITED

M/S Sharma Construction

LUIT CONSTRUCTION

MAHANTA ENTERPRISES

DRISTEE ASSOCIATES

D G Corporation