Supply of Furniture for the Chamber of SE and other Engineers at the 9th Floor under P and RD Department during the year 2024-25

Amount

Finnesse Table

Providing, fixing and commissioning Finnesse table of the following specifications. Finesse Table with size shall be 1500 Width mm x 750 Depth mm x 740 Height mm .Table top shall be 25 mm thick plain particle board (PPB) Clad with 0.6 mm thick post formed laminate and 1 mm thick backing laminate (bdl) .Flat edge Duly sealed with 2 mm thick PVC beading.The modesty shall be 18 mm thick plain particle board ( ) PPB Clad with 1.0 mm thick decorative laminate (DL) on both sides. Edge Sealed with 2 mm thick PVC beading. Finesse ERU -3616 LHS size shall be 1050 Width x 450 Depth x 705 Height. The top of Finesse shall be 25 mm thick plain particle board (PPB) Clad with 0.6 mm thick post formed laminate and 1 mm thick Backing Laminate ( BDL).Flat Edge duly sealed with 2 mm thick PVC beading. The Modesty shall be 18 mm thick plain particle board (PPB) Clad with 1.0 mm thick Decorative Laminate (DL) on both sides. Edge sealed with 2 mm thick PVC Beading. Quality Certification: The manufacturer should have ISO 9001:2015, ISO 50001:2018, ISO 45001:2018, ISO 14001:2015 (all ISO must be from IAF recognised accreditation body), BIFMA (membership), AIOTA, Greenguard (by UL), GRIHA, Indian Design Mark, BIFMA Level-2, Indoor air quality certification.

Free Standing Ped with Castors for Finnesse Table

Providing, fixing and commissioning Free Standing Pedestal with Castors of the following specifications. Overall Dimensions of Free Standing Pedestal With Castors For Finnesse Table shall be 390mm(W)x440mm(D x646mm(H). The construction & Material used shall be welded assembled , 0.8 mm thick CRCA for body shell , drawer front & tray , front side stiffener ,rear aide stiffener and 1.2 mm thick CRCA Top stiffener & Bottom stoffener . The drawer fronts shall be metal front straight edge . Locking shall be 10 lever cam lock & Central RH locking with actuator & lock channel mechanism for box-box-file Pedestal . The top panel shall be metal straight edge top . Castor should be swiveling non - lockable castors mounted below the body shell for free standing full height mobile pedestal and M8 Leveling stud for free standing pedestal . The anti-tipping mechanism shall have fifth roller arrangement mounted below file drawer to avoid toppling of unit when file drawer is pulled out . Partition in drawer shall be 1 no. Partition in box drawers with lock mounted . Plastic pencil tray shall be optional accessory . Finish shall be epoxy polyester powder coated to the thickness of 50 microns . Application shall be suitable for pushing below work surface which has got a clear height of 725 mm from below . For drawer pulling side wise tapered recess provided in shell behind drawer fronts . Quality Certification: The manufacturer should have ISO 9001:2015, ISO 50001:2018, ISO 45001:2018, ISO 14001:2015 (all ISO must be from IAF recognised accreditation body), BIFMA (membership), AIOTA, Greenguard (by UL), GRIHA, Indian Design Mark, BIFMA Level-2, Indoor air quality certification.

WORK TABLE

Providing, fixing and commissioning office table of the following specifications. Its size shall be 1200 Width x 600 Depth x 740 Height . The top shall be made from 25 mm thick pre- laminated board . All the edges are sealed with 2 mm thick PVC edge band all around . Side panels shall be made from 25 mm thick pre- laminated paticle board . All the edges are sealed with 2 mm thick PVC edge band on the user side and 0.8 mm on the top and bottom side .The side panels have 2 glide screws each for levelling of the desk. Modesty panel shall be made from 18 mm thick pre- laminated particle board . All the edges are sealed with 0.8 mm thick PVC edge band all around. Freestanding Pedestal shall be made from 18 mm pre- laminated particle board with a combination of 2 mm and 0.8 mm PVC edge band on all the exposed surfaces as per requirement . The drawers are provided with suitable slides for smooth operation . All the pedestal drawers are centrally locked with a single key .Drawer slides are of Hettich. Quality Certification: The manufacturer should have ISO 9001:2015, ISO 50001:2018, ISO 45001:2018, ISO 14001:2015 (all ISO must be from IAF recognised accreditation body), BIFMA (membership), AIOTA, Greenguard (by UL), GRIHA, Indian Design Mark, BIFMA Level-2, Indoor air quality certification.

Echo Storage [900W x 695H x 450D]

Providing, fixing and commissioning Storage (900W x 695H x 450D mm) of the following specifications.Eco wooden storage range comprises of a range of Low height to medium height. Body : Body is made from 18mm PLB with all the edges sealed with 0.8 mm thick PVC Edgeband. The Back panel is 9mm White PLT. The entire construction is ready to assemble unit and is assembled with suitable KD fittings. The shelves and separator panels ( if available ) is made from 18 mm white PLT and edges are sealed with 0.8 mm edge band. The bottom shelf is fixed and other shelves have one step adjustment for optimizing the space. Doors : Door Panels ae made from 18 mm PLB with 2 mm Edge band on all edges ad a flush Plastic handle is fitted vertically at the center of the door. The hinge door has suitable hinges. SDU has a push type lock. All the storages are fitted with a 6 mm leveler at bottom for leveling. Quality Certification: The manufacturer should have ISO 9001:2015, ISO 50001:2018, ISO 45001:2018, ISO 14001:2015 (all ISO must be from IAF recognised accreditation body), BIFMA (membership), AIOTA, Greenguard (by UL), GRIHA, Indian Design Mark, BIFMA Level-2, Indoor air quality certification.

Echo Storage (HDU) [450W x 695H x 450D]

Providing, fixing and commissioning Godrej make Echo HDU Storage (450W x 695H x 450D mm) of the following specifications. Wooden storage range comprises of a range of Low height to medium height wooden HDU. Body : Body is made from 18mm PLB with all the edges sealed with 0.8 mm thick PVC Edgeband. The Back panel is 9mm White PLT. The entire construction is ready to assemble unit and is assembled with suitable KD fittings. The shelves and separator panels ( if available ) is made from 18 mm white PLT and edges are sealed with 0.8 mm edge band. The bottom shelf is fixed and other shelves have one step adjustment for optimizing the space. Doors : Door Panels ae made from 18 mm PLB with 2 mm Edge band on all edges ad a flush Plastic handle is fitted vertically at the center of the door. The hinge door has suitable hinges and HDU is fitted with an adjustable fitting for height adjustment. HDU has a three point lock. All the storages are fitted with a 6 mm leveler at bottom for leveling. Quality Certification: The manufacturer should have ISO 9001:2015, ISO 50001:2018, ISO 45001:2018, ISO 14001:2015 (all ISO must be from IAF recognised accreditation body), BIFMA (membership), AIOTA, Greenguard (by UL), GRIHA, Indian Design Mark, BIFMA Level-2, Indoor air quality certification.

PREMIUM EXECUTIVE CHAIRS - High Back

Providing, fixing and commissioning Premium Executive High Back Chair of the following specifications. SEAT/BACK ASSEMBLY: The seat and back should be made up of1.2 ±0.1cm. thick hot pressed plywood measured and upholstered with fabric and moulded Polyurethane foam with PVC lipping all around. The back foam should be designed with contoured lumbar support for extra comfort. HIGH BACK SIZE: 49.0 cm. (W) x 71.0 cm. (H). SEAT SIZE: 49.0 cm. (W) x 44.0 cm. (D). HIGH RESILIENCE (HR) POLYURETHANE FOAM: The HR polyurethane foam should be moulded with density = 45 ±2 kg/m3/ and hardness load 16 ± 2 kgf for 25% compression. ARMRESTS :The one-piece armrests made of black integral skin polyurethane with 50-70 Shore ‘A’ Hardness and reinforced with M.S. insert. The armrests should be scratch and weather resistant. The armrests should be fitted to the seat with seat/armrest connecting strip assembly made of 0.5 ± 0.05 cm. thk. HR steel. CENTER TILT mechanism: The mechanism should be designed with the following features: 360° revolving type, 17°±2° maximum tilt on pivot at center, Upright position locking, Tilt tension adjustment. PNEUMATIC HEIGHT ADJUSTMENT : The pneumatic height adjustment has an adjustment stroke of 12.0 ±0.3cm. TELESCOPIC BELLOW ASSEMBLY: The bellow should be 3 piece telescopic type and injection moulded in black Polypropylene. PEDESTAL ASSEMBLY: The pedestal should be injection moulded in black 33% glass-filled Nylon-66 and fitted with 5 nos. twin wheel castors. The pedestal should be 66.3 ±0.5cm.(76.3 ±1.0 cm with castors). TWIN WHEEL CASTORS:The twin wheel castors should be injection moulded in Black Nylon. Overall Dimensions of Chair: Seat Height - min 41.0to max 53.0cm. Height - min 100.0 to max 112.0cm. Width & Depth of Chair as measured from pedestal - Width-76.3 cm and Depth-76.3 cm. Quality Certification: The manufacturer should have ISO 9001:2015, ISO 50001:2018, ISO 45001:2018, ISO 14001:2015 (all ISO must be from IAF recognised accreditation body), BIFMA (membership), AIOTA, Greenguard (by UL), GRIHA, Indian Design Mark, BIFMA Level-2, Indoor air quality certification.

Diva Visitor with Arms

Providing, fixing and commissioning Diva Visitor Chair with Arms of the following specifications. The seat made from 1.2 ±0.1cm. thk. hot pressed plywood measured and back should be injection moulded from black Co-polymer Polypropylene upholstered with fabric and moulded Polyurethane foam together with seat and back covers. The back foam should be designed with contoured lumbar support for extra comfort. SEAT SIZE: 45.0cm(W) x 42.0cm.(D) BACK SIZE: 39.0cm(W) x 38.0cm.(H). SEAT / BACK COVERS: The seat and back covers should be injection moulded in black Co-polymer Polypropylene. HIGH RESILIENCE (HR) POLYURETHANE FOAM: The HR polyurethane foam should be moulded with density = 45 +/-2 kg/m3 and hardness load 16 ± 2 kgf for 25% compression. ARMREST ASSEMBLY : The armrests should be made of black integral skin Polyurethane wtih 50-70 Shore 'A' Hardness and reinforced with M.S. insert. The P.U. armrests should be then fixed to black powder-coated ( OFT 40-60 microns ) armrest brackets made of of 0.5 ± 0.05 cm. thk. HR steel and fitted with claddings made of injection moulded Polypropylene. FIXED TYPE mechanism: The fixed type mechanism should be without back tilt. TUBULAR FRAME: The tubular frame should be made up of 0 2.54 ±0.03cm. x 0.2 ±0.016cm.thk. M.S. E.R.W. tube and black powder coated ( DFT 40-60 microns). Overall Dimensions of Chair: Seat Height -49.5cm. Height -88.5cm. Width & Depth of Chair as measured from pedestal - Width-56.0 cm and Depth-54.0 cm. Quality Certification: The manufacturer should have ISO 9001:2015, ISO 50001:2018, ISO 45001:2018, ISO 14001:2015 (all ISO must be from IAF recognised accreditation body), BIFMA (membership), AIOTA, Greenguard (by UL), GRIHA, Indian Design Mark, BIFMA Level-2, Indoor air quality certification.

JYOTI COMMERCIAL CORPORATION (BID ID -5597181)

Decor 9 (BID ID -5602271)