Construction of outdoor stadium at Sirwar town Sirwar taluka of Raichur District Work code RCH2318143468 under KKRDB MACRO in Manvi constituency

Clearing and grubbing road land including uprooting rank vegetation, grass, bushes, shrubs, saplings and

trees girth up to 300 mm, removal of stumps of trees cut earlier and disposal of unserviceable ...

Earth work excavation for Foundation by Mechanical means depth upto 1.50m, as per drawing and technical

specifications, including setting out, shoring, strutting, barricading, caution lights, includin...

Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing

and technical specifications, including setting out, shoring, strutting, barricading, caution li...

Construction of Embankment with approved materials deposited at site from roadway cutting and

excavation from drain and foundation of other structures graded with desired compaction. (Royalty shall be...

Construction of sub-grade and earthen shoulders with approved material obtained from borrow pits with all

lifts & leads, transporting to site, spreading, grading to required slope and compacted to mee...

Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution li...

Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes...

Providing Coursed rubble masonry (second sort) with hard stone in foundation & plinth with Cement mortar 1:6 (1 cement : 6 coarse sand) (COMMON SR 2023-24,Vol-2, SL.No. 5.3, p. No.9).

Providing Size Stone masonry with hard stone in foundation & plinth with Cement mortar 1:6 (1 cement : 6 coarse sand) (SR 2023-24, Vol-2 SL.No. 5.4, P. No. 9).

Providing 20 mm cement plaster of mix :1:4 (1 cement: 4 fine sand) to brick/stone masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, includi...

Providing and laying in position Cement Concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 m height. T...

Additionalities for Formwork, Centering & Scaffolding ( SR 2023-24 ,Addendum I , Page No : 111 , Vol 1 . )8 Percentage on finished rate of per m3

Additionalities for Formwork, Centering & Scaffolding ( SR 2023-24 ,Addendum I , Page No : 111 , Vol 1 . ) 70 Percentage on finished rate of per m3

Additionalities for Formwork, Centering & Scaffolding ( SR 2023-24 ,Addendum I , Page No : 111 , Vol 1 . )50 Percentage on finished rate of per m3

Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/tr...

Additionalities for Formwork, Centering & Scaffolding ( SR 2021-22 , Appendix 1 , Page No : 115 , Vol 1 . ) 70 Percentage on finished rate of concrete per m3

Additionalities for Formwork, Centering & Scaffolding ( SR 2021-22 , Appendix 1 , Page No : 115 , Vol 1 . ) 60 Percentage on finished rate of concrete per m4

Additionalities for Formwork, Centering & Scaffolding ( SR 2021-22 , Appendix 1 , Page No : 115 , Vol 1 . ) 60 Percentage on finished rate of concrete per m5

Additionalities for Formwork, Centering & Scaffolding ( SR 2021-22 , Appendix 1 , Page No : 115 , Vol 1 . ) 50 Percentage on finished rate of concrete per m6

Additionalities for Formwork, Centering & Scaffolding ( SR 2021-22 , Appendix 1 , Page No : 115 , Vol 1 . ) 45 Percentage on finished rate of concrete per m7

Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes...

Supplying, fitting and placing TMT FE 550 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tying ...

Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by r...

Construction of Embankment by excavating the available approved Gravel/Murrum deposited at a place or borrow pits during or prior excavation with all lifts and lead, transportation to site, spreading,...

Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes...

Providing Brick work with common burnt clay Non Modular bricks of class designation 3.5 in foundation and plinth in Cement mortar 1:6 (1 cement : 6 coarse sand) including cost of all materials, labour...

Providing Half brick masonry with common burnt clay Non Modular bricks of class designation 3.5 in foundations and plinth in Cement mortar 1:4 (1 cement : 4 coarse sand) including cost of all material...

Providing Red Salwood frames of doors, windows, clerestory windows, ventilators and other frames, wrought, framed or assembled including making plaster groves (excluding cost of cement concrete and si...

Providing and fixing flush door shutter made out of solid core block board type, well seasoned , chemicaly treated hard wood battens and internal frame with minimum 45 mm wide wooden frame alround doo...

Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid door/window/Clerestory windows & other Frames/ Chowkhat comprising of virgin PVC polymer of K value 58-60 (Suspensi...

Providing and fixing factory made Green certified, Anti Termite, UV resistant, high water absorbant single extruded WPC (Wood PolymerComposite) solid plain flush door shutter of required size comprisi...

Providing & fixing of louvered ventilator made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elastomer) and lead fr...

Providing 12 mm cement plaster with Cement mortar 1:3 (1 cement: 3 coarse sand) finished with a

floating coat of neat cement to brick masonry including rounding off corners wherever required

Providing 15 mm cement plaster with cement mortar 1:3 (1 cement:

3 coarse sand) finished with a floating coat of neat cement on the rough

side of single or half brick wall including rounding off cor...

Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the

manufacturer), of 1st quality conforming to IS : 15622, of approved make, in all colours, shades,

Providing and fixing 1st quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be

specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle

Providing and applying white cement based putty of average thickness 1 mm, of approved brand

and manufacturer, over the plastered wall surface to prepare the surface even and smooth

complete as per sp...

Wall painting with premium acrylic emulsion paint of interior grade, having VOC (Volatile Organic

Compound ) content less than 50 g/L of approved brand and manufacture, including applying

additional c...

Applying one coat of water thinnable cement primer of approved brand and manufacture on wall

surface :Water thinnable cement primer to give an even shade after thoroughly brooming the

surface to remov...

Finishing walls with water proofing cement paint of required shade :New work (Two coats applied @

4.84 kg/10 m²) to give an even shade after thoroughly brooming the surface to remove all dirt, dust,

Applying priming coat: With ready mixed pink or Grey primer of approved brand and manufacture

on wood work (hard and soft wood) including preparing the surface after thorougly cleaning oil,

Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well

as curvilinear portions of the building all complete as per the architectural drawings with 18 m...

Providing edge moulding to 18mm thick Granite stone counters, vanities etc including machine

polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-incharge. (PWD...

Electrical estimate

Concealed Conduit System Supplying heavy gauge PVC conduit pipe ……mm dia

.mm thick confirming to IS 2509 with suitable size bends, metal/PVC junction

boxes, adhesive paste etc., and running befo...

Supplying heavy gauge PVC Conduit Pipe.dia.mm thick with suitable size bends,metal

junction boxes adhesive paste etc.,by groove cutting in the wall and fixing by bracing U or J

hook sand cement plas...

Supplying and fixing PVC/metal conduit Deep junction box

Supplying and flush mounting powder coated / galvanized metal box suitable for mounting

modular switch plates. The box should be firmly flush mounted after due groove cutting in

Brick/Stone/C.C wall

Supplying and flush mounting powder coated / galvanized metal box suitable for mounting

modular switch plates. The box should be firmly flush mounted after due groove cutting in

Brick/Stone/C.C wall

Supplying and fixing superior quality modular switch mounting polycarbonate plate with

necessary supporting back plate with required nos. of machine screws, bolts nuts etc.,

complete on the existing...

Supplying and fixing superior quality modular switch mounting polycarbonate plate with

necessary supporting back plate with required nos. of machine screws, bolts nuts etc.,

complete on the existing...

Extra for Groove cutting in brick wall/CC floor to the suitable depth for concealing of

Conduit/GI pipe and plastering, finishing upto wall surface complete.

Point wiring Copper without switch.Supplying and wiring adopting loop system in existing

PVC Conduit /casing usingf 1100v Grade , COPPER conductor flexible multistrand FRLS

PVC insulated., 2x1.5 Sqm...

Point wiring Copper without switch.Supplying and wiring adopting loop system in existing

PVC Conduit /casing usingf 1100v Grade , COPPER conductor flexible multistrand FRLS

PVC insulated., 2x1.5 Sqm...

Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade,

multistrand copper wire with low conductor resistance single core in open or concealed

system of wiring with specified ...

Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS...

Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS...

Supplyingandfixingofmodularswitch&connectedaccessoriesonexisting modular switch plate as per IS 3854 and IS 1293.

Supplyingandfixingofmodularswitch&connectedaccessoriesonexisting modular switch plate as per IS 3854 and IS 1293.

Supplyingandfixingofmodularswitch&connectedaccessoriesonexisting modular switch plate as per IS 3854 and IS 1293.

Supplyingandfixingofmodularswitch&connectedaccessoriesonexisting modular switch plate as per IS 3854 and IS 1293.

Supplyingandfixingofmodularswitch&connectedaccessoriesonexisting modular switch plate as per IS 3854 and IS 1293.

Supplying And fixing/replacing of 6/16/32A electrical accessories on existing switch board

Supplyingandfixingofmodularswitch&connectedaccessoriesonexisting modular switch plate as per IS 3854 and IS 1293.

Supplying of .feet -PVC Batten with integrated LED tube . W with high quality diffuser

with Life of 25000 burning hours & 70% lumen maintenance with CRI 80. Power Input:

220-240V 50/60Hz & Power fac...

Supply of round/square recess/surface mounted rolling type LED Down light with .W

GU 10 LED Lamp Rib Fabricated from Die cast aluminium with white powder coated

prewired to mains connector & has swi...

Fixing all types and all capacities of fluorescent false ceiling spot light CFL LED

fittings indoor on the wall ceiling rafters girders using 23 0.0076 twin twisted PVC

insulated wires, required Nos...

Supplying of patty fitting, made out of CRCA Sheet metal body with locking type holder completely wired with HF

Electronic Ballast, Operating voltage range from 180V to 265V, 50Hz AC power supply excl...

Supplying and fixing miniature circuit breakers on existing MCB distribution boards using

necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short

circuit breaking ...

Supplying and fixing miniature circuit breakers on existing MCB distribution boards using

necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short

circuit breaking ...

Supplying and fixing Moulded Case Circuit Breaker (MCCB) over the existing wood/panel

board using necessary screws, bolts, nuts, necessary phase separators, handle and wiring

complete. Protection of...

Fabricating supplying and mounting MS box made out … SWG suitable for floor /

wall mounting, fully weather proof with provision for better heat dissipation,

provided with hinged front cover, equip...

Supplying and fixing angle iron frame work fabricated out of M.S. angle iron. and M.S.

Flat.with bolts, washers etc., and painted with 2 coats of red oxide and then two coats of

approved paint.

Supplying . amps rated 3phase with neutral bus bar using required capacity

electrolytic aluminium strips covered with heat shrinkable coloured PVC sleeve,

mounted on phenolic/FRP/DMC insulator which...

Supplying of multi function digital meter with three line back light LC type display

for voltage, Current, frequency,Power, power factor, KVA, KWH, KVAR suitable

for 3 phase, 4 wire LT network with ...

Supplying and fixing Electronic Trivector Meter (ETV) suitable for operation LT

operation and -CT operated meter in polycarbonate body in class 0.5 accuracy as per

IS 14697 and completely wired

Supplying of on load change over switches 4 poles, AC- 23A Duty, 415V, 50Hz, AC

Supply. With all accessories. (SM Enclosure Sheet Metal Execution)

Supplying, fixing and wiring 50/5 to 400/5A 5VA burden Current Transformer Class

0.5 accuracy with Tape Wound

Supplying, fixing and wiring 50/5 to 400/5A 5VA burden Current Transformer Class 0.5

accuracy with Tape Wound

Earth work excavation for pipelines/cables by Manual means upto 600 mm trench width, as

per drawing and technical specifications, including setting out, shoring, strutting,

barricading, caution ligh...

Labour charges for laying of 1.1 KV class UG cable in existing trench GI pipe / stoneware

pipe / on wall / on pole as required.

Supplying & fixing of Porcelain fuse channel with cut out onexisting wooden/panel using

necessary nuts, bolts andwashers

Supplying, fixing, wiring, earth electrode for grounding conduits, I.C. cutouts and other equipment's on

the meter board using 40 mm dia 2.90 mm thick GI pipe 2.5m long buried in a pit . The pit shou...

Supplying heavy gauge PVC conduit pipe . mm dia.mm thick confirming to IS 2509 with suitable size

bends, metal/PVC Junction boxes, adhesive paste etc., and running before concreting the slab. The cond...

Supplying heavy gauge PVC Conduit Pipe .dia .mm thick with suitable size bends, metal junction boxes

adhesive paste etc., by groove cutting in the wall and fixing by bracing U or J hook sand cement p...

Supplying and fixing PVC/metal conduit Deep junction box

Supplying and fixing regular MCB distribution boards on wall / wood board / flush mounting using required clamps,

bolts, nuts etc., with provision for fixing suitable type capacity MCB's single phase ...

GI Grounding pipe, B - Class, 42 mm dia, 2.5 Mtr long, 3.2 mm thick with bolt, nut, GI Strips and washer complete Minimum

Weight of GI Pipe: 7.3 Kg

Good Quality well burnt Charcoal for grounding purposes packed in non returnable gunny bag of 30 Kg each

Good Quality Salt for grounding purposes packed in 50 Kg gunny bag

Supplying and fixing regular MCB distribution boards on wall / wood board / flush mounting using required clamps,

bolts, nuts etc., with provision for fixing suitable type capacity MCB's single phase...

Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing

materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking c...

Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing

materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking c...

water supply and sanitary

Providing and fixing white vitreous china extended wall mounting water closet of size 780x370x690 mm of

approved shape including providing & fixing white vitreous china cistern with dual flush fitting...

Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron P or S

trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually co...

Providing and fixing unplasticised P.V.C. connection pipe with PTMT Nuts, collar and bush of approved

quality and colour. 15 mm nominal bore with 450 mm length ( SR 2023-24 Item No 13.27.2 , Page No

Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of

430x260x350 mm or 340x410x265 mm sizes respectively. ( SR 2023-24 Item No 14.23 , Page No 135

Providing and fixing PTMT urinal cock of approved quality and colour using 15 mm nominal bore, 80 mm

long, 42 mm high and 30mm wide with BSP female threads weighing not less than 48 g. ( SR 2023-24 It...

Providing and fixing PTMT 15 mm Urinal spreader size 95x69x100 mm with 1/2" BSP thread and shapes,

weighing not less than 60 g. SR 2023-24 Item No 14.42 , Page No 138 Vol 2

Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete.32 mm

dia ( SR 2023-24 Item No 14.28.1.1 , Page No 136 Vol 2)

Providing and fixing C.P. brass long body bib cock of approved quality conforming to IS standards and

weighing not less than 690 g. ( SR 2023-24 Item No 13.14 , Page No 119 Vol 2)

Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality

conforming to IS:8931 ( SR 2023-24 Item No 13.16 , Page No 119 Vol 2)

Providing and fixing PTMT grating of approved quality and colour. Rectangular type with openable circular

lid ( SR 2023-24 Item No 13.22.2 , Page No 120 Vol 2)

Providing and fixing gun metal non- return valve of approved quality (screwed end) : 25 mm nominal bore

Horizontal (SR 2023-24 Item No 13.6.1.1 , Page No 117 Vol 2)

Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats

complete : 25 mm nominal bore ( SR 2023-24 Item No 13.5.3 , Page No 117 Vol 2)

Providing and fixing PTMT liquid soap container 109 mm wide, 125 mm high and 112 mm distance from

wall of standard shape with bracket of the same materials with snap fittings of approved quality and

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold

water supply including all CPVC plain & brass threaded fittings This includes jointing of pipe...

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold

water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with cla...

Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked,

with cover and suitable locking arrangement and making necessary holes for inlet, outlet and ...

Earth work excavation by manual means for drains,canals, waste weir draft, approach channels, key trench,

foundation of Bridges and such similar works, as per drawing and technical specifications, inc...

Constructing brick masonry chamber of internal dimension 600x600mm and depth of 600mm (inner

dimensions) with modular bricks of CD 75 in cement mortar 1:6, bed concrete 150mm thick with 1:3:6,

Providing and fixing MS inspection door of size 60 cms x 60 cms, including MS frame made of 50x50x6mm

angle, shutters made of 3mm thick MS sheets, with hinges, locking arrangements at top etc. includi...

Providing, laying and jointing HDPE pipes of specified grade and conforming to IS 4984-2016 with latest

ammendments and conveying to work site including loading and unloading at both destinations and ...

Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations and other similar

works etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by r...

Ground water sump

Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m,

as per drawing and technical specifications, including setting out, shoring, strutting,

barricading, caution li...

Providing and laying in position Cement Concrete for levelling course for all works in

foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates

as per relevant IS Codes...

Providing and laying in position Cement Concrete for all Sub structures of building, Irrigation

works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to

3.50 m height. T...

Percentage Additionalities for Formwork,

Centering & Scaffolding ( SR 2023-24 ,

Addendum I , Page No : 111 , Vol 1 )

Percentage on finished rate of concrete per

Percentage Additionalities for Formwork,

Centering & Scaffolding ( SR 2023-24 ,

Addendum I , Page No : 111 , Vol 1 . ) 10

Percentage on finished rate of concrete per

Percentage Additionalities for Formwork,

Centering & Scaffolding ( SR 2023-24 ,

Addendum I , Page No : 111 , Vol 1 . ) 60

Percentage on finished rate of concrete per

Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all

materials, machinery, labour, cleaning, straightening, cutting, bending, hooking,

laping/welding joints, tyin...

Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations and

other similar works etc. in layers not exceeding 20cm in depth, consolidating each deposited

Providing 18 mm cement plaster in two coats under layer 12 mm thick cement plaster with

cement mortar 1:5 (1 cement : 5 coarse sand) and a top layer 6 mm thick cement plaster

with cement mortar 1:3 (1...

Providing and fixing MS inspection door of size 60 cms x 60 cms, including MS frame made

of 50x50x6mm angle, shutters made of 3mm thick MS sheets, with hinges, locking

arrangements at top etc. includi...

Providing and fixing MS ladder between landings, 45 cms wide using angle iron of specified

sizes, 20mm MS bars at 25 cms. centre to centre, with necessary supports of same angle

iron etc. as directed,...

Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as

per drawing and technical specifications, including setting out, shoring, strutting, barricading,

Providing and laying in position Cement Concrete for levelling course for all works in

foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per

relevant IS Codes...

Providing and laying in position Cement Concrete for all Sub structures of building, Irrigation

works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50

Percentage Additionalities for Formwork, Centering

& Scaffolding ( SR 2023-24 , Addendum I , Page

No : 111 , Vol 1 . )50 Percentage on finished rate of

concrete per m3

Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all

materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding

joints, tyin...

Providing and constructing load bearing wall with Solid Concrete blocks of size

400x200x200mm having block density more than 1800kg/m3 and minimum compressive

strength of 4.00 N/mm2 conforming to IS 2...

Providing and constructing load bearing wall with Solid Concrete blocks of size

400x150x200mm having block density more than 1800kg/m3 and minimum compressive

strength of 4.00 N/mm2 conforming to IS 2...

Providing 20 mm cement plaster of mix :1:6 (1 cement: 6 fine sand) to brick/stone masonry

including rounding off corners wherever required smooth rendering, providing and removing

scaffolding, includi...

Providing and fixing MS inspection door of size 60 cms x 60 cms, including MS frame made of

50x50x6mm angle, shutters made of 3mm thick MS sheets, with hinges, locking arrangements at

top etc. includi...

labour, including lowering into trenches, laying true to line, level and perfect linking at joints

leak proof including jointing of approved type with all labour charges and all lift

charges,handling ...

Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as

per drawing and technical specifications, including setting out, shoring, strutting, barricading,

Providing and laying in position Cement Concrete for levelling course for all works in

foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per

relevant IS Codes...

Providing and laying in position Cement Concrete for all Sub structures of building, Irrigation

works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50

Percentage Additionalities for Formwork, Centering

& Scaffolding ( SR 2023-24 , Addendum I , Page

No : 111 , Vol 1 . )50 Percentage on finished rate of

concrete per m3

Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all

materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding

joints, tyin...

Providing and constructing load bearing wall with Solid Concrete blocks of size

400x200x200mm having block density more than 1800kg/m3 and minimum compressive

strength of 4.00 N/mm2 conforming to IS 2...

Providing and constructing load bearing wall with Solid Concrete blocks of size

400x150x200mm having block density more than 1800kg/m3 and minimum compressive

strength of 4.00 N/mm2 conforming to IS 2...

Providing 20 mm cement plaster of mix :1:6 (1 cement: 6 fine sand) to brick/stone masonry

including rounding off corners wherever required smooth rendering, providing and removing

scaffolding, includi...

Providing and fixing MS inspection door of size 60 cms x 60 cms, including MS frame made of

50x50x6mm angle, shutters made of 3mm thick MS sheets, with hinges, locking arrangements at

top etc. includi...

labour, including lowering into trenches, laying true to line, level and perfect linking at joints

leak proof including jointing of approved type with all labour charges and all lift

charges,handling ...

Geophysical investigation at site for sinking borewells for supplying drinking water to the

habitation either through the Hand Pump MWS or P.W.S.S, by vertical electrical sounding by

adopting Venner o...

Sinking of Borewell of 165mm dia clear using super fast hydraulic rig ofcapacity 300 PSIG & above 1100 CMF & above in all strata including over burdern upto 20 m. Fixing of casing pipes, collars and c...

Sinking of Borewell of 165mm dia clear using super fast hydraulic rig ofcapacity 300 PSIG & above 1100 CMF & above in all strata including over burdern upto 20 m. Fixing of casing pipes, collars and c...

Sinking of Borewell of 165mm dia clear using super fast hydraulic rig ofcapacity 300 PSIG & above 1100 CMF & above in all strata including over burdern upto 20 m. Fixing of casing pipes, collars and c...

Sinking of Borewell of 165mm dia clear using super fast hydraulic rig ofcapacity 300 PSIG & above 1100 CMF & above in all strata including over burdern upto 20 m. Fixing of casing pipes, collars and c...

Providing PVC ringtite pipes conforming to IS 4985:2000 with latest amendments and

conveying to worksite, rolling and lowering into trenches, laying true to line and level and

perfect linking at joint...

Providing and fixing MS casing collars as per IS 1239 (part-II) 1982 with all latest amendments

if any for any dia. The thickness of plate used for covering one end shall be 3mm (minimum).

Providing and laying at site of work MS casing caps as per IS 1239 (part-II) 1982 with all latest

amendments if any for any dia. The thickness of plate used for covering one end shall be 3mm

Providing Submersible Pump Set of 150mm dia suitable for bore well and confirming to IS

8034-2000;3Phase, SS Bowl & Impeller with Low volt Motor as per specifications, to work

site as per necessary am...

Supply, installing,testing and commissioning COMMON control panel consisting of the

following INCOMING:1 No set of Phase indicating lamps with SFU of suitable rating 1 No,

Analog Ammeter, 1 No Analog ...

Providing, Laying and Fixing GI pipes conforming to IS 1239:1990 with latest amendments

complete with GI fittings (excluding the cost of fittings) with cuts and threads wherever

necessary, including t...

Supply and delivery at site wrought middle steel (galvanized) GI elbow confirming to IS 1239-

II, 1991 with latest amendments if any for:For 40 mm dia GI elbow (Commom 2023-2024

PWD SR (Vol-5) Sl No.1...

Labour charges for Erection, Electrification and commissioning of Pumpsets, including

aligning and balancing of all items including supply and erection of two pair of supporting

clamps, bore well caps...

Supplying and drawing 3 core flat PVC sheathed submersible pump cable manufactured with

electrolytic grade copper with flexible copper with low resistance conductor confirming to

Labour charges for erection of indoor type panel board and meter boardunits with all necessary

materials and labour tools and equipments including cement concrete for foundation/bed

etc,complete as pe...

Earthing: Supplying and fixing and wiring earth electrode for groundingcircuits IC cutouts and

other equipments on the meter board in the pit. The pits should be filled up with equal

proportion of sal...

Providing and fixing MS casing collars as per IS 1239 (part-II) 1982 with all latest amendments

if any for any dia. The thickness of plate used for covering one end shall be 3mm (minimum).

Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per

drawing and technical specifications, including setting out, shoring, strutting, barricading, caution li...

Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes...

Providing Random rubble masonry with hard stone in foundation and plinth including levelling up with

cement concrete 1:6:12 (1 cement : 6 coarse sand : 12 graded stone aggregate 20 mm nominal size)

Providing Size Stone masonry with hard stone in foundation & plinth with

Cement mortar 1:6 (1 cement : 6 coarse sand) (SR 2023-24, Vol-2 SL.No. 5.4, P. No. 9).

Providing 20 mm cement plaster of mix :1:4 (1 cement: 4 fine sand) to brick/stone masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, includi...

Providing and laying in position Cement Concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 m height. T...

Percentage Additionalities for Formwork, Centering & Scaffolding ( SR 2023-24 , Addendum I , Page No : 111 , Vol 1 . ) 8 Percentage on finished rate of concrete per m3

Percentage Additionalities for Formwork, Centering & Scaffolding ( SR 2023-24 , Addendum I , Page No : 111 , Vol 1 . )70 Percentage on finished rate of concrete per m3

Percentage Additionalities for Formwork, Centering & Scaffolding ( SR 2023-24 , Addendum I , Page No : 111 , Vol 1 . ) 50 Percentage on finished rate of concrete per m3

Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/tra...

Percentage Additionalities for Formwork, Centering & Scaffolding ( SR 2023-24 , Addendum I , Page No : 111 , Vol 1 . ) 70 Percentage on finished rate of concrete per m3

Percentage Additionalities for Formwork, Centering & Scaffolding ( SR 2023-24 , Addendum I , Page No : 111 , Vol 1 . ) 50 Percentage on finished rate of concrete per m3

Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tyin...

Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by r...

Providing Brick work with common burnt clay Non Modular bricks of class designation 3.5 in foundation and plinth in Cement mortar 1:6 (1 cement : 6 coarse sand) including cost of all materials, labour...

Providing 18 mm cement plaster in two coats under layer 12 mm thick cement plaster with cement mortar 1:5 (1 cement : 5 coarse sand) and a top layer 6 mm thick cement plaster with cement mortar 1:3 (1...

Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface :Water thinnable cement primer to give an even shade after thoroughly brooming the surface to remov...

Finishing walls with water proofing cement paint of required shade :New work (Two coats applied @ 4.84 kg/10 m²) to give an even shade after thoroughly brooming the surface to remove all dirt, dust, ...

Providing and laying red oxide flooring 40 mm thick, with an under layer of 30mm thick M-15 cement concrete and top layer of 10mm thick plaster with 1:3 cement mortar mixed with red oxide finished wit...