Restoring and updating of existing electronics System at state election Commission TVPM

Amount

Restoration work

OD16508/2024-2025:Supply and Installation of Layer 2 Manageable 10 port POE+ Ethernet Switch having 8 x 10/100/1000 Mbps + minimum 2 x GbE SFP Gigabit ports (Power 120W or more) ports, 20 Gbps bandwidth, support layer 3 features IPv4 routing, RIP etc. supporting ipv6, Priority levels up to 8 hardware queues, up to 9K Jumbo frames, Support minimum 4,094 VLANs simultaneously, AC 230V power input, device should have minimum 512 MB RAM,256 MB flash memory etc.. Approved Make: Cisco

OD16509/2024-2025:Supply and Installation of Layer 2 Manageable 28 port PoE Ethernet Switch which having 24 x 10/100/1000 Mbps + 4 x 1GbE SFP ports, forwarding Capacity 41 Millions of Packets per Second (mpps) (64-byte packets) and 56 Gbps Switching Capacity in Gigabits per Second (Gbps), Layer 3 features include RIP, dynamic routing etc., support upto 4094 VLANs and 16K MAC address, supporting ipv6, Priority levels up to 8 hardware queues, up to 9216 Jumbo frames, device should have minimum 512 MB RAM,256 MB flash memory, minimum 190W Power Dedicated to PoE. Approved Make: Cisco

OD16510/2024-2025:Supply and Installation of Layer 2 Manageable 28 port Ethernet Switch which having 24 x 10/100/1000 Mbps + 4 x GbE SFP ports, forwarding Capacity minimum 41 Millions of Packets per Second (mpps) (64-byte packets) and 56 Gbps Switching Capacity in Gigabits per Second (Gbps), support layer 3 features IPv4 routing, RIP etc. support upto 4094 VLANs and 16K MAC address, supporting ipv6, Priority levels up to 8 hardware queues, up to 9K Jumbo frames, device should have minimum 512 MB DRAM, 256 MB flash memory. Approved Make: Cisco

OD17265/2024-2025:Supply and Installation of Layer 2 fully managed 28 port Ethernet Switch having 24x Gigabit SFP Slots, 2 x Gigabit Ethernet combo + 2 SFP slots, forwarding Capacity minimum 41 Millions of Packets per Second (mpps) (64-byte packets) and 56 Gbps Switching Capacity in Gigabits per Second (Gbps), support layer 3 features IPv4 routing, RIP etc., support upto 4094 VLANs and 16K MAC address, supporting ipv6, Priority levels up to 8 hardware queues, up to 9K Jumbo frames, device should have minimum 512 MB DRAM, 256 MB flash memory, 3 year warranty. Approved Make: Cisco

OD17452/2024-2025:Supply and Installation of 19 inch, floor standing 17U (600x800) network Rack with four numbers of Caster wheels and having Accessories like supporting trays,2 no's of cooling fan ,power strip with spike arrester for 8 sockets(min). Approved Make: Dlink, Legrand, Netrack, President, Valrack

OD17455/2024-2025:Supply and Installation of 19 inch, wall/ Floor mounting 6U Rack with ACDB of 4 ports and having Accessories like supporting trays, cooling fan etc. Approved Make: D-Link, HCL, Netrack, President, Valrack

OD17458/2024-2025:Supply and Installation of Fiber Splice Enclosure Box support 6 core fiber cable with fully cushioned splice holder containing grooves for fixing splice protection sleeves, Cable Spools made upon flame retardant plastic, high impact resistance, Blanking plates, pigtail/patch cords, etc. and also splicing of minimum 4 core of existing fiber with duplex single mode pigtails and other required accessories Including splicing charges.

OD17484/2024-2025:Supply, Installation, Testing and Commissioning of 6 port LIU with SM pig tails with SCconnectors with all Splicing and necessary connection to pigtails. Approved Make: AFL, Belden, corning, Finolex, Molex, R and M, Sterlite, systimax.

OD17485/2024-2025:Supply and Installation of 19 inch 24 port rack mountable 1U size complete Steel housing fully powder coated Light Interface Unit (LIU) with 24 numbers of SC connectors having FR grade Nylon Cable grommets, ABS Splice Trays with fully cushioned splice holder containing grooves for fixing splice protection sleeves, Cable Spools made up of flame retardant plastic, high impact resistance, stackable design for providing sufficient room for storage of excess cables, Blanking plates, pigtail, etc. Including splicing charges. Approved Make: Actassi, Belden, Corning, Panduit, Molex, R and M, Sterlite, Systimax .

OD17681/2024-2025:Supply and installation of 1G Copper SFP Transceiver module with a data rate of up to 1.25Gb/s bi-directional data links or better, Hot-pluggable SFP footprint etc. Preferred make: Syrotech or equivalent or higher.

OD17685/2024-2025:Supply and Installation of 1G duplex SFP module Approved Make: Allied Telesis, Aruba, Brocade, Cisco, Fortinet, HP, Juniper, Netgear, Ruckus

OD17687/2024-2025:Supply and Installation of Fiber SM patch cord with LC-SC connectors and 1.5 meter length. Approved Make: AFL, Belden, corning, Finolex, Molex, R and M, Sterlite, systimax.

OD17739/2024-2025:Supply and installation of CAT 6 Surge protection system with DIN rail, fastening set and earthing cable for high-speed networks (Class EA/CAT6A), and having following specification 1. Protection class: Fine protection, 2. Earthing via DIN rail or connection cable, 3. Support of Power over Ethernet ++ (PoE++/4PPoE) to 1 A in accordance with IEEE 802.3, 4. Impulse durability wire-earth: C2: 2 kV / 1 kA (8/20µs), 5. Impulse durability wire-wire: C1: 0.3 kV / 0, 15 kA (8/20µs), 6. IP10, 7. SPD to IEC 61643-21: Class II+III / C2+C1, 7. Total discharge current: 7 kA etc. Approved Make: ABB, Cape, Legrand, OBO, Schneider

OD17774/2024-2025:Installation and configuration of VLAN, restoring of existing electronics system after installing VLAN, training, documentation including network diagram etc.

OD18706/2024-2025:Supply and Providing 1 metre CAT-6 Giga UTP (LSZH) patch cord. Approved Make: Actassi, Belden, Molex, Panduit, R and M, Systimax.

OD18756/2024-2025:Supply, Installation, Testing and commissioning of SC Duplex single mode adapter connected through 2 pigtails and spliced it to the Fiber in the existing LIU (splicing charges included), etc. Approved Make: Actassi, Belden, Corning, Panduit, Molex, R and M, Sterlite, Systimax

90.9.2.1:Supply and fixing 100 x 50 mm PVC Cable Management System with base and lid along with the following accessories conforming to IEC 61084/ BS 476 & 4678 on surface / recess including cutting the wall and making good the damages in case of recessed installation as required.100 x 50 mm CMS with base and lid

90.9.2.5:Supply and fixing 100 x 50 mm PVC Cable Management System with base and lid along with the following accessories conforming to IEC 61084/ BS 476 & 4678 on surface / recess including cutting the wall and making good the damages in case of recessed installation as required.Internal angle 90 degree

90.9.2.8:Supply and fixing 100 x 50 mm PVC Cable Management System with base and lid along with the following accessories conforming to IEC 61084/ BS 476 & 4678 on surface / recess including cutting the wall and making good the damages in case of recessed installation as required.End cap

90.9.2.11:Supply and fixing 100 x 50 mm PVC Cable Management System with base and lid along with the following accessories conforming to IEC 61084/ BS 476 & 4678 on surface / recess including cutting the wall and making good the damages in case of recessed installation as required.Cable retainer

90.9.2.25:Supply and fixing 100 x 50 mm PVC Cable Management System with base and lid along with the following accessories conforming to IEC 61084/ BS 476 & 4678 on surface / recess including cutting the wall and making good the damages in case of recessed installation as required.Internal Tee

OD18996/2024-2025:Supply and installation of ETL Verified 19 inch rack mountable 16 port fully loaded F-Type Coaxial Patch Panel (RG6) including termination charges.

OD19010/2024-2025:Supplying and drawing co-axial TV cable RG-6 grade, 0.7 mm solid copper conductor PE insulated, shielded with fine tinned copper braid and protected with PVC sheath in the existing surface/ recessed steel/ PVC conduit as required.

OD18636/2024-2025:Supply and Installation of 6 Core Single Mode Low Water Peak Outside plant (OSP) OFC having LSZH sheath, conforming to ITU-T G.655, IEC 60794-1 : 2001, IS 13882 (Part 1/Sec 1): 1999 etc. Approved Make: Actassi, Belden, Corning, Finolex, Panduit, Molex, R and M, Sterlite, Systimax .

OD17483/2024-2025:Supplying and drawn of UTP 4 pair CAT 6 LAN cable with LSZH sheath and minimum 23AWG copper conductor in the existing surface/recessed steel/PVC conduit as required1 run of Cable. Approved Make: Actassi, Belden, Molex, Panduit, R and M, Systimax.

1.21.1:Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/ recess including cutting the wall and making good the same in case of recessed conduit as required.20 mm

1.21.2:Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/ recess including cutting the wall and making good the same in case of recessed conduit as required.25 mm

5.19:Providing and fixing 4.00 mm dia copper wire on surface or in recess for loop earthing along with existing surface/ recessed conduit/ submain wiring/ cable as required.

OD36053/2024-2025:Supply, Installation and fixing of Equipotential bonding rail light duty to maintain an equal earth potential meets the requirement for IS/IEC-62305 with suitable accessories to fix in Rack.

OD36054/2024-2025:Supply, Installation, Testing and Commissioning of Power line Surge protection device - OPTION 1( Class B+C) type SPD :This panel should include pluggable type surge arrester in suitable enclosure Class C/ Class 2 as per IEC 61643 (IP 20) , thermal dis connector, provision for inbuilt common remote indication for defective arresters to connect between Line and Neutral and one number arrester Spark Gap type to connect between Neutral and Earth of following ratings including base element pluggable arresters. Nominal voltage -230V, 50Hz, type single MOV with built in thermal fuse and cooling gel(L to N) and spark gap encapsulated / non exhausting (N to E). Nominal discharge current-20 kA (8/20 micro sec) for Line to Neutral and 40 kA(8/20 micro sec) for Neutral to Earth, max discharge current 40 kA (8/20 micro sec)for Line to Neutral & 50 kA(8/20 micro sec) for Neutral to Earth voltage protection level 1400V (L to N) & 1200V (N to E).Operating temp -40 to +80 degree Celsius or better. Response time less than 25 nano sec (L to N), 100 nano sec (N to E), DIN rail mounting type etc. complete with back up fuse as required and as directed, including rack mountable rail etc. Approved make : Erico, Raycap , OBO, Weidmuller, L and T

Bidder Name

F1 Solutions