ARC work of HT/LT lines, T/C, maintenance (including raising of plinth, TC Booting, MVCC Stringing) & O/H Laying of XLPE Cable Pole to Pole of feeders for ND and any Other Scheme in the jurisdiction of Kosamba Sdn under KIM ind Division. Through outsourced agency for existing DGVCL Network for SDN under Kim Division.

Name of Work :- Rate contract for erection of HT/LT line & T/C work for various scheme work for SDN

office under Kim Ind Division Office.

ITEM CODE Details of Works Qty Unit Labour Rate Amount

HT TAPPING FROM THE EXISTING

POLE INCLUDING FIXING OF CROSS

ARMS, CLAMPS ANTI-CLIMBING

DEVICES, DANGER BOARD,

INSULATORS ETC. COMPLETE AND

1 9926000001 PAINTING OF FABRICATED MATERIALS No.

AND NUMBERING COMPLETE WITH

COST OF PAINTS AS PER STANDARD

SPECIFICATION BUT EXCLUDING

ERECTION OF GUY SET AND

ERECTION OF PSC POLES OF 8 *200

KG INCLUDING EXCAVATION OF PIT

AND REFILLING OF EARTH, FIXING

OFCROSS ARMS, TOP FITTING CLAMPS

ANTI-CLIMBING DEVICES, INSULATORS

ETC. COMPLETE AND PAINTING OF

FABRICATED MATERIALS USED ON

THE POLES AND NUMBERING WITH

COST OF PAINT AS PER STANDARD

SPECIFICATION BUT EXCLUDING

ERECTION OF GUY SET AND

File No: DGVCLDOKI/TEN/e-file/6817/2026/2941/Account

Approved By: Executive Engineer,Technical,DGVCLDOKI

Letter No: DGVCLDOKI/0312/06/2026 Approved Date: 08-06-2026

ERECTION OF STEEL POLES OF 9 TO

11 METERS INCLUDING EXCAVATION

OF PIT AND REFILLING OF EARTH,

FIXING OFCROSS ARMS, TOP FITTING

CLAMPS ANTI-CLIMBING DEVICES,

DANGER BOARD, INSULATORS ETC.

3 9926000003 COMPLETE AND PAINTING OF STEEL No.

POLE, FABRICATED MATERIALS USED

ON THE POLEAND NUMBERING WITH

COST OF PAINT AS PER STANDARD

SPECIFICATION BUT EXCLUDING

ERECTION OF GUY SET AND

ERECTION OF STEEL POLE OF

METERS FOR RAILWAY CROSSING ON

BG/MG/NG LINE FOR 0.400/11/22KV

OVERHEAD LINES I.E INCLUDING

EXCAVATION OF PIT & REFILLING OF

EARTH, FIXING CROSS ARMS, TOP

FITTING CLAMPS,ANTI-CLIMBING

DEVICES DANGER BOARD,

INSULATORS ETC. COMPLETE AND

PAINTING OF STEEL POLES,

FABRICATED MATERIALS USED ON

THE POLES AND NUMBERING WITH

COSTOF PAINT AS PER STANDARD

SPECIFICATION BUT EXCLUDING

ERECTION OF GUY SETS AND

ERECTION OF DOUBLE POLE

STRUCTURE OF 8 METERS 200 KG PSC

POLES INCLUDING EXCAVATION OF

PITS & REFILLING OF EARTHING,

FIXING OF CHANNELS, SUPPORTING

ANGLES,CLAMPS, ANTI-CLIMBING

BOARDS,INSULATORS ETC.COMPLETE

AND PAINTING OF FABRICATED

MATERIALS USED ON THE POLES AND

NUMBERING WITH COST OF PAINT AS

PER STANDARD SPECIFICATION BUT

EXCLUDING ERECTION OF GUY SETS

AND EARTHING.(WITHOUT AB SWITCH)

File No: DGVCLDOKI/TEN/e-file/6817/2026/2941/Account

Approved By: Executive Engineer,Technical,DGVCLDOKI

Letter No: DGVCLDOKI/0312/06/2026 Approved Date: 08-06-2026

ERECTION OF DOUBLE POLE

STRUCTURE OF 9 TO

METERS.STEEL POLE INCLUDING

EXCAVATION OF PITS & REFILLING

OFEARTH, FIXING OF CHANNELS,

SUPPORTING ANGLES, CLAMPS,ANTI-

CLIMBING DEVICES DANGER BOARDS,

6 9926000006 INSULATORS ETC.COMPLETE & No.

PAINTING OF POLES,FABRICATED

MATERIALSUSED ON THE POLES AND

NUMBERING WITH COST OF PAINTSAS

PER STANDARD SPECIFICATION BUT

EXCLUDING ERECTION OF GUY SET

AND EARTHING.(WITHOUT AB SWITCH)

ERECTION OF DOUBLE POLE

STRUCTURE WITH MOUNTING OF AB

SWITCH, HG FUSES OF 8 MTRS 200 KG

PSC POLES INCLUDING EXCAVATION

OF PITS AND REFILLING OF

EARTH,FIXING OF CHANNELS

SUPPORTING ANGLES, CLAMPS, ANTI-

CLIMBING DEVICES, DANGER BOARDS,

INSULATORS,DOFUSES ETC.

COMPLETE AND PAINTING OF

FABRICATED MATERIALS USED ON

THE POLES AND NUMBERING WITH

COSTOF PAINT AS PER STANDARD

SPECIFICATION BUT EXCLUDINGOF

ERECTION OF GUY SET AND

EARTHING.(WITH AB SWITCH)

ERECTION OF DOUBLE POLE

STRUCTURE WITH MOUNTING OF AB

SWITCH,HG FUSES, 9 TO 11 METERS

STEEL POLES INCLUDING

EXCAVATION OF PITS AND REFILLING

OF EARTH, FIXING OFCHANNEL,

SUPPORTING ANGLES, CLAMPS, ANTI-

CLIMBING DEVICES , DANGER

BOARDS, INSULATORS, ETC.

COMPLETE AND PAINTING OF POLES

FABRICATED MATERIALS USED ON

THE POLES AND NUMBERING WITH

COST OF PAINT AS PER STANDARD

SPECIFICATION BUT EXCLUDING

ERECTION OF GUY SET AND

EARTHING.(WITH AB SWITCH)

File No: DGVCLDOKI/TEN/e-file/6817/2026/2941/Account

Approved By: Executive Engineer,Technical,DGVCLDOKI

Letter No: DGVCLDOKI/0312/06/2026 Approved Date: 08-06-2026

ERECTION OF DOUBLE POLE

STRUCTURES WITH MOUNTING OFAB

SWITCH, HG FUSES,

TRANSFORMERS, LIGHTENING

ARRESTORS, DISTRIBUTION BOX.

OF 8 METER,200KG PSC POLE METERS

POLES INCLUDING EXCAVATION OF

PITS AND REFILLING OF EARTH,

CARTING OF TRANSFORMERS

FROMSTORES TO SITE, FIXING OF

9 9926000009 CHANNELS, SUPPORTING No.

ANGLES,BRACINGS CROSS ARMS

CLAMPS, ANTICLIMBING DEVICES

DANGER BOARDS, CONDUCTOR AND

CABLE WIRING ETC.COMPLETE AND

PAINTING OF FABRICATED MATERIALS

USEDON THE POLES AND NUMBERING

WITH COST OF PAINT AS PER

STANDARD SPECIFICATION BUT

EXCLUDING ERECTION OF GUY SETS

ERECTION OF DOUBLE POLE

STRUCTURE WITH MOUNTING OF AB

SWITCH,HG FUSES TRANSFORMERS,

LIGHTENING ARRESTORS,

DISTRIBUTION BOX 9 TO 11 METERS

STEEL POLES INCLUDING

EXCAVATION OF PITS & REFILLING OF

EARTH CARTING OF TRANSFORMERS

FROM STORE TO SITE, FIXINGOF

CHANNELS SUPPORTING ANGLES,

BRACING, CROSS ARMS,CLAMPS,

ANTICLIMBING DEVICES, DANGER

BOARDS,CONDUCTOR AND CABLE

WIRING ETC. COMPLETE AND

PAINTING OF POLES FABRICATED

MATERIALS USED ON THE POLES AND

NUMBERING AS PER STANDARD

SPECIFICATION BUT EXCLUDING

ERECTIONS OF GUY SETS AND

ERECTION OF GUY SET INCLUDING

EXCAVATION OF PITS & REFILLING OF

EARTH AS PER STANDARD

SPECIFICATION WITH STAY CLAMPS,

STAY WIRE, ANCHOR ROD, TURN

BUCKLE, EYEBOLT, GUY INSULATOR,

CEMENT CONCRETE BLOCK ETC. BUT

EXCLUDING CONCRETING.

File No: DGVCLDOKI/TEN/e-file/6817/2026/2941/Account

Approved By: Executive Engineer,Technical,DGVCLDOKI

Letter No: DGVCLDOKI/0312/06/2026 Approved Date: 08-06-2026

CONCRETING OF POLES, GUYS, ETC.

INCLUDING COST OF CEMENT SAND

12 9926000012 METAL (1:2:4) AND WATER ETC. AS PER CMT

STANDARD SPECIFICATION.(cement

Should be 53 grade) used for Concreting.

ERECTION OF COIL TYPE EARTHING

INCLUDING COST OF COAL,SALT ETC.

13 9926000013 BUT WITHOUT COST OF GI WIRE AS No.

PER STANDARD SPECIFICATION(20kg

solt+20kg coal)

ERECTION OF GI PIPE/CI PLATE TYPE

EARTHING INCLUDINGCOST OF COAL

SALT ETC. BUT WITHOUT COST OF

PIPE/GIPLATE GI WIRE AS PER

STANDARD SPECIFICATION.(20kg

solt+20kg coal)

ERECTION OF STREET LIGHT FIXTURE

COMPLETE WITH CLAMPS, BRASS

NIPPLE, BRASS HOLDER TECK WOOD

15 9926000015 BUSH,REFLECTORS FUSE, WIRING No.

ETC. AS PER STANDARD

SPECIFICATION BUT EXCLUDING COST

OF(30mm2)ACSR/34MM@,55MM2 AAA

CONDUCTOR for ALL TYPE OF

16 9926000016 CONDUCTOR (EXCEPT DOG

CONDUCTOR) FOR 11/22KV & LT LINES

INCLUDING FIXING OF INSULATORS,

BINDING JUMPERING ETC.

STRINGING OF GI WIRE 8 SWG

INCLUDING BINDING JUMPERING ETC.

PROVIDING SINGLE PHASE SERVICE

CONNECTION WITH PVC 2.5/4MM2

TWIN CORE CABLE FROM TERMINAL

POLE TO METERING POINT INCLUDING

FIXING OF METER WITH METER

EARTHING COMPLETE WORK AS PER

STANDARD SPECIFICATION BUT

EXCLUDING COST OF MATERIALS.

PROVIDING THREE PHASE 4 WIRE

SERVICE CONNECTION WITH PVC

4MM2/10MM2 FOUR CORE CABLE

FROM TERMINAL POLE TO METERING

19 9926000019 POINT INCLUDING FIXING OF METER No.

WITH METER EARTHING COMPLETE

WORK AS PER STANDARD

SPECIFICATION BUT EXCLUDING COST

File No: DGVCLDOKI/TEN/e-file/6817/2026/2941/Account

Approved By: Executive Engineer,Technical,DGVCLDOKI

Letter No: DGVCLDOKI/0312/06/2026 Approved Date: 08-06-2026

ADDITIONAL COST FOR EXCAVATION

OF PIT IN HARD ROCK AREA FOR

ERECTION OF POLE/ GUY ETC. AS PER

STANDARD SPECIFICATION OVER &

ABOVE NORMAL COST COVERED

20 9926000020 AGAINST EXCAVATION OF PIT UNDER No.

NORMAL SOIL FOR ERECTION OF

POLE,GUY, DOUBLE POLE STRUCTURE

EARTHING WITH THE APPROVAL OF

SUPDT.ENGINEER.

PROVIDING GUARDING TO HT LINE ON

ROAD/ RAIL CROSSING.

PROVIDING GUARDING OF LT LINES

ON ROAD/RAIL CROSSING.

23 9926000023 LT LINE TAPPING- SINGLE PHASE No. 51

24 9926000024 LT LINE TAPPING- THREE PHASE No. 93

Stringing/LAYING OF OVER HEAD LT

CABLE FOR ROAD CROSSING,HT LINE

CROSSING AND TELEPHONE LINE

CROSSING ETC.(PER SPAN)

ERECTION OF SINGLE POLE

STRUCTURES WITH , HG

FUSES,TRANSFORMERS, LIGHTENING

ARRESTOR, DISTRIBUTION BOX. ON

METERS 200 KGAND PSC POLE

INCLUDING EXCAVATION OF PITS AND

REFILLING OF EARTH, CARTING OF

TRANSFORMERS FROM STORES TO

SITE, FIXING OF CHANNELS,

SUPPORTING ANGLES,BRACINGS

CROSS ARMS CLAMPS, ANTICLIMBING

DEVICES DANGER BOARDS,

CONDUCTOR AND CABLE WIRING

ETC.COMPLETE AND PAINTING OF

FABRICATED MATERIALS USED ON

THE POLE AND NUMBERING WITH

COST OF PAINT AS PER STANDARD

SPECIFICATION BUT EXCLUDING

ERECTION OFGUY SETS AND

File No: DGVCLDOKI/TEN/e-file/6817/2026/2941/Account

Approved By: Executive Engineer,Technical,DGVCLDOKI

Letter No: DGVCLDOKI/0312/06/2026 Approved Date: 08-06-2026

ERECTION OF SINGLE POLE

STRUCTURES WITH MOUNTING OFAB

SWITCH , HG FUSES,TRANSFORMERS,

LIGHTENINGARRESTOR, DISTRIBUTION

BOX. ON 9 to 11 METERS RSJ POLE

INCLUDING EXCAVATION OF PITS AND

REFILLING OF EARTH, CARTING OF

TRANSFORMERS FROM STORES TO

SITE, FIXING OF CHANNELS,

SUPPORTING ANGLES,BRACINGS

CROSS ARMS CLAMPS, ANTICLIMBING

DEVICES DANGER BOARDS,

CONDUCTOR AND CABLE WIRING

ETC.COMPLETE AND PAINTING OF

FABRICATED MATERIALS USED ON

THE POLE AND NUMBERING WITH

COST OF PAINT AS PER STANDARD

SPECIFICATION BUT EXCLUDING

ERECTION OFGUY SETS AND

ERECTION OF PSC POLES OF 10 *270

KG INCLUDING EXCAVATION OF PIT

AND REFILLING OF EARTH, FIXING OF

CROSS ARMS, TOP FITTING CLAMPS

ANTI-CLIMBING DEVICES, INSULATORS

ETC. COMPLETE AND PAINTING OF

FABRICATED MATERIALS USED ON

THE POLES AND NUMBERING WITH

COST OF PAINT AS PER STANDARD

SPECIFICATION BUT EXCLUDING

ERECTION OF GUY SET AND

ERECTION OF DOUBLE POLE

STRUCTURE OF 10 METERS 270 KG

PSC POLES INCLUDING EXCAVATION

OF PITS & REFILLING OF EARTHING,

FIXING OF CHANNELS, SUPPORTING

ANGLES,CLAMPS, ANTI-CLIMBING

BOARDS,INSULATORS ETC.COMPLETE

AND PAINTING OF FABRICATED

MATERIALS USED ON THE POLES AND

NUMBERING WITH COST OF PAINT AS

PER STANDARD SPECIFICATION BUT

EXCLUDING ERECTION OF GUY SETS

AND EARTHING.(WITHOUT AB SWITCH)

STRINGING OF 100MM2 ACSR/100MM2

AAAC CONDUCTOR FOR 11/22KV & LT

30 9926000030 LINES INCLUDING FIXING

OFINSULATORS, BINDING JUMPERING PER KM

File No: DGVCLDOKI/TEN/e-file/6817/2026/2941/Account

Approved By: Executive Engineer,Technical,DGVCLDOKI

Letter No: DGVCLDOKI/0312/06/2026 Approved Date: 08-06-2026

STRINGING OF DOG CONDUCTOR FOR

11/22KV & HT LINES INCLUDING FIXING ONE COND

OF INSULATORS, BINDING JUMPERING PER KM

ERECTION OF DOUBLE POLE

STRUCTURES WITH MOUNTING OF AB

SWITCH, HG FUSES,

TRANSFORMERS, LIGHTENING

ARRESTORS, DISTRIBUTION BOX.

OF 10 METERS 270 KGAND PSC POLES

INCLUDING EXCAVATION OF PITS AND

REFILLING OF EARTH, CARTING OF

TRANSFORMERS FROMSTORES TO

SITE, FIXING OF CHANNELS,

32 9926000032 SUPPORTING ANGLES,BRACINGS No.

CROSS ARMS CLAMPS, ANTI-CLIMBING

DEVICES,DANGER BOARDS,

CONDUCTOR AND CABLE WIRING

ETC.COMPLETE AND PAINTING OF

FABRICATED MATERIALS USED ON

THE POLES AND NUMBERING WITH

COST OF PAINT AS PER STANDARD

SPECIFICATION BUT EXCLUDING

ERECTION OF GUY SETS AND

DISMENTALLING OF 8 MTR PSC POLE

WITH CREDITING OF FABRICATION AT

33 9926000033 STORE & STACKING OF POLE SAFELY No.

ON ROAD SIDE OR CREDITING TO

DEPARTMENTAL STORE

DISMENTALLING OF 10 MTR PSC POLE

WITH CREDITING OF FABRICATION AT

34 9926000034 STORE & STACKING OF POLE SAFELY No.

ON ROAD SIDE OR CREDITING TO

DEPARTMENTAL STORE

DISMENTALLING OF TRANSFORMER

CENTRE (8 MTR PSC POLE) (WITH

TRANSFORMER) WITH CREDITING OF

35 9926000035 FABRICATION & TRANSFORMER AT No.

STORE & STACKING OF POLE SAFELY

ON ROAD SIDE OR CREDITING TO

DEPARTMENTAL STORE

DISMENTALLING OF TRANSFORMER

CENTRE (8 MTR PSC POLE) (WITHOUT

TRANSFORMER) WITH CREDITING OF

FABRICATION AT STORE & STACKING

OF POLE SAFELY ON ROAD SIDE OR

CREDITING TO DEPARTMENTAL STORE

File No: DGVCLDOKI/TEN/e-file/6817/2026/2941/Account

Approved By: Executive Engineer,Technical,DGVCLDOKI

Letter No: DGVCLDOKI/0312/06/2026 Approved Date: 08-06-2026

STRINGING OF LT ABC OF 1*35 SQ MM

+ 1*25 SQ MM INCLUDING FITTING OF

ALL ACESSARIES I.E. SPECIAL DESIGN

SUSPENSION / TENSION CLAMP,

FIXING OF CROSS ARM, LT SHACKLE

INSULATOR ETC. FOR FIXING OF

MESSENGER WIRE AND TO PROVIDE

SERVICE CONNECTION ON AERIAL

BUNCH CABLE BY INSULATED

PIERCEING CONNECTORS THROUGH

SERVICE CONNECTION BOX

COMPLETE AS REQUIRED & DIRECTED

BY ENGINEER IN CHARGE.

STRINGING OF LT ABC OF 3*50 SQ MM

+1*25 SQ MM+1*35 SQ MM INCLUDING

FITTING OF ALL ACESSARIES I.E.

SPECIAL DESIGN SUSPENSION /

TENSION CLAMP, FIXING OF CROSS

ARM, LT SHACKLE INSULATOR ETC.

38 9926000038 FOR FIXING OF MESSENGER WIRE KM

AND TO PROVIDE SERVICE

CONNECTION ON AERIAL BUNCH

CABLE BY INSULATED PIERCEING

CONNECTORS THROUGH SERVICE

CONNECTION BOX COMPLETE AS

REQUIRED & DIRECTED BY ENGINEER

STRINGING OF 11KV ABC OF 3*95 SQ

MM +80 SQ MM INCLUDING FITTING

OF ALL ACESSARIES I.E. SPECIAL

DESIGN SUSPENSION / TENSION

39 9926000039 CLAMP, FIXING OF CROSS ARM, KM

INSULATOR,PREPARING SHACKLE

POINT,JUMPERS ETC. AS REQUIRED &

DIRECTED BY ENGINEER IN CHARGE

STRINGING OF 22 KV ABC OF 3*70 SQ

MM +95 SQ MM INCLUDING FITTING

OF ALL ACESSARIES I.E. SPECIAL

DESIGN SUSPENSION / TENSION

CLAMP, FIXING OF CROSS ARM,

40 9926000040 BINDING TO PIN KM

INSULATOR,PREPARING SHACKLE

POINT,JUMPERS ETC. AS REQUIRED

AND DIRECTED BY ENGINEER IN

File No: DGVCLDOKI/TEN/e-file/6817/2026/2941/Account

Approved By: Executive Engineer,Technical,DGVCLDOKI

Letter No: DGVCLDOKI/0312/06/2026 Approved Date: 08-06-2026

STRINGING OF LT ABC OF 2*50 SQ MM

+1*25 SQ MM+ 35 SQ MM INCLUDING

FITTING OF ALL ACESSARIES I.E.

SPECIAL DESIGN SUSPENSION /

TENSION CLAMP, FIXING OF CROSS

ARM, LT SHACKLE INSULATOR ETC.

FOR FIXING OF MESSENGER WIRE

AND TO PROVIDE SERVICE

CONNECTION ON AERIAL BUNCH

CABLE BY INSULATED PIERCEING

CONNECTORS THROUGH SERVICE

CONNECTION BOX COMPLETE AS

REQUIRED & DIRECTED BY ENGINEER

DISMENTALING OF RSJ (9/11 METER)

42 9926000042 POLE AND CREDITING THE OLD No.

MATERIAL TO STORE

DISMENTALING OF TRANSFORMER

CENTER ON 10MTR,270KG PSC

POLE(WITHOUT TRANSFORMER) WITH

43 9926000043 CREDITING OF FABRICATION AT No.

STORE AND STACKING OF POLE

SAFELY ON ROAD SIDE OR CREDITING

TO DEPARTMENTAL STORE

DISMENTALING OF TRANSFORMER

CENTER ON 10MTR,270KG PSC

POLE(WITH TRANSFORMER) WITH

44 9926000044 CREDITING OF FABRICATION AT No.

STORE AND STACKING OF POLE

SAFELY ON ROAD SIDE OR CREDITING

TO DEPARTMENTAL STORE

DISMENTLING OF 11KV ABC OF 3*95

SQ MM +80 SQ MM AND CREDITING

45 9926000045 FITTING OF ALL ACESSARIES AND KM

FABRICATION TO DEPARTMENTAL

DISMENTLING OF 22 KV ABC OF 3*70

SQ MM +95 SQ MM AND CREDITING

46 9926000046 FITTING OF ALL ACESSARIES AND KM

FABRICATION TO DEPARTMENTAL

DISMENTALING OF LT ABC OF 1*35 SQ

47 9926000047 MM + 1*25 SQ MM AND CREDITING KM

FITTING OF ALL ACESSARIES TO

DEPARTMENTAL STORE.

DISMENTALING OF LT ABC OF 3*50 SQ

MM +1*25 SQ MM+1*35 SQ MM AND

CREDITING FITTING OF ALL

ACESSARIES TO DEPARTMENTAL

File No: DGVCLDOKI/TEN/e-file/6817/2026/2941/Account

Approved By: Executive Engineer,Technical,DGVCLDOKI

Letter No: DGVCLDOKI/0312/06/2026 Approved Date: 08-06-2026

DISMENTALING OF LT ABC OF 2*50 SQ

MM +1*25 SQ MM+ 35 SQ MM AND

CREDITING FITTING OF ALL

ACESSARIES TO DEPARTMENTAL

RESTRINGING OF ALL TYPE OF

CONDUCTOR (EXCEPT DOG

50 9926000050 CONDUCTOR) FOR 11/22KV & LT LINES

INCLUDING FIXING OF INSULATORS,

BINDING JUMPERING ETC.

RESTRINGING OF DOG CONDUCTOR

51 9926000051 FOR 11/22KV HT LINES INCLUDING ,

BINDING JUMPERING ETC.

LABOUR CHARGE FOR THE

52 9926000052 INSTALLATION OF NEW DTR METER. No.

(METER WILL BE PROVIDED BY DGVCL)

LABOUR CHARGE FOR THE

REPLACEMENT OF DTR METER AND

53 9926000053 OLD METER SHOULD BE CREDITED TO No.

SDN STORE. (METER WILL BE

PROVIDED BY DGVCL)

LABOUR CHARGE FOR PROVIDING CT

COIL FOR DTR METER CONNECTION.

(CT COIL WILL BE PROVIDED BY

LABOUR CHARGE FOR REPLACEMENT

OF CT COIL FOR DTR METER

55 9926000055 CONNECTION AND OLD CT SHOULD BE PER CT

CREDITED TO SDN STORE. (CT COIL

WILL BE PROVIDED BY DGVCL)

LABOUR CHARGE FOR FIXING OF MMB

56 9926000056 FOR DTR METER (MMB WILL BE No.

PROVIDED BY DGVCL)

LABOUR CHARGE FOR REPLACEMENT

57 9926000057 OF DTR METER BOX. (METER WILL No.

BE PROVIDED BY DGVCL)

PROVIDING / REPLACEMENT OF 1.5 SQ

MM 10 CORE COPPER CABLE

METER (CABLE TO BE PROVIDED BY

LABOUR CHARGE FOR

PROVIDING/RECONNECTION OF

59 9926000059 TERMINAL CONNECTION WITH

PROPER SIZE OF LUGS. (LUGS COST IS

BORNE BY AGENCY)

File No: DGVCLDOKI/TEN/e-file/6817/2026/2941/Account

Approved By: Executive Engineer,Technical,DGVCLDOKI

Letter No: DGVCLDOKI/0312/06/2026 Approved Date: 08-06-2026

LABOUR CHARGE FOR THE SPOT

READING OF DTR METER WITH DETAIL

SURVEY OF DEFECT IF ANY. A DULY

SIGN COPY BY SURVEYOR PERSON OF

AGENCY IN PRO-FORMA REPORT

60 9926000060 SHOULD BE SUBMITTED TO SDN PER DTR

OFFICE.(* ONLY IF ALL PARAMETER OF

VOLTAGE, CURRENT & LOAD AS

SHOWN IN PER-FORMA IS FILLED) AS

PER THE INSTRUCTION OF ENGINEER

LABOUR CHARGE FOR THE SPOT

READING OF DTR METER WITH DETAIL

SURVEY OF DEFECT IF ANY. A DULY

SIGN COPY BY SURVEYOR PERSON OF

61 9926000061 AGENCY IN PRO-FORMA REPORT PER DTR

SHOULD BE SUBMITTED TO SDN

OFFICE. (DULY FILL PER-FORMA IN

FAULT CONDITION IN WHICH READING

PARAMETER IS NOT SHOWN IN METER)

INSTALLATION OF DTR METER

INCLUDING METER BOX, PROVIDING &

FIXING OF 1.5SQ MM SINGLE STRAND

10 CORE ARMOURED COPPER CABLE

(3.5METER), TERMINATION IN METER &

COIL ETC.(METER, METER BOX,

C.T./P.T. COIL WILL BE PROVIDED BY

INSTALLATION OF DTR METER

INCLUDING METER BOX, TERMINATION

IN METER & COIL ETC. (WITHOUT

10CORE COPPER CABLE) (METER,

METER BOX, C.T./P.T. COIL WILL BE

PROVIDED BY DGVCL)

Binding of messanger Conductorat with a

distance not more than 0.75 mtr with

64 9926000064 turns minimum on XLPE Cable with single No

strand binding wire (including cost of

Supply and Installation of 11/22 kV

Distribution Transformers HT Terminal

65 9926000086 protector (UV Resistance) with using PER SET

95/120/150 sq.mm long barrel aluminum

lug. (1Set = 3 Nos i.e. on R, Y, B)

Supply & Installation of HT EPR Tap on

11/22 kV Distribution Transformer with

replacement of bare conductor by HT ABC

66 9926000087 conductor (DO bottom side to transformer) PER SET

after removal of semi conductor by HT ABC

(6 inch both side). HT ABC to be supplied

by DGVCL. (1Set = 3 Nos i.e. on R, Y, B)

File No: DGVCLDOKI/TEN/e-file/6817/2026/2941/Account

Approved By: Executive Engineer,Technical,DGVCLDOKI

Letter No: DGVCLDOKI/0312/06/2026 Approved Date: 08-06-2026

Supply, Installation, Testing and

Commissioning of Maintenance Free,

Ready Capsule, Pipe-In-Cage (Pic) Type,

67 9926000088 Earth Electrodes for HT Feeder Pole NO

Having 2000 mm Electrode Length as per

the Tender Specifications and Drawing. (All

Materials Will Be Supplied By Agency)

Supply, Installation, Testing and

Commissioning of Maintenance Free,

Ready Capsule, Pipe-In-Cage (Pic) Type,

68 9926000089 Earth Electrodes for HT Feeder Pole NO

Having 3000 mm Electrode Length as per

the Tender Specifications And Drawing. (All

Materials Will Be Supplied By Agency)

Supply and Installation of 25 X 3 mm GI

Strip having hot dip- galvanized-zinc

coating of 80-100 microns without any

joints or welding. Both the end of the GI

strip should be connected with GI nut bolts

and required fabrication work for giving

separate earthing connections to

(1) Neutral of the transformer

(2) MS structures of the transformer center

(Approximately 25 meter GI strip per

transformer centre

- as per requirement and instruction of

Engineer in- charge) (All Materials will be

supplied by Agency)

Supply and Installation of uPVC standard

make Pipe of 1.25" diameter for covering

GI strip with UV protected Cable Ties of

550 X 7.6 mm size to bind with pole

face(Approximately 25 meter uPVC pipe for

GI strip covering per transformer centre -as

per requirement and instruction of Engineer

Supply & fixing of upto 33 kV Conductor

sleeve for Busbar to Drop out Fuse and

Drop out fuse to Transformer H.T. including

Busbar (12 mm sleeve) as per technical

specification. (All Materials will be supplied

Supply & fixing of upto 33 kV Conductor

sleeve for Busbar to Drop out Fuse and

Drop out fuse to Transformer H.T. without

Busbar (12 mm sleeve) as per technical

specification. (All Materials will be supplied

File No: DGVCLDOKI/TEN/e-file/6817/2026/2941/Account

Approved By: Executive Engineer,Technical,DGVCLDOKI

Letter No: DGVCLDOKI/0312/06/2026 Approved Date: 08-06-2026

Supply & fixing of upto 33 kV Conducotr

sleev for Busbar to Drop out Fuse and Drop

out fuse to Transformer H.T. including

73 9926000094 Busbar(15 mm sleev) as per technical Per TC

specification. (All Materials will be supplied

Supply & fixing of upto 33 kV Conductor

sleeve for Busbar to Drop out Fuse and

Drop out fuse to Transformer H.T. without

Busbar (15 mm sleeve) as per technical

specification. (All Materials will be supplied

Supply & fixing of Disc type Red Color

FRP(Non-flammable) material with

Weather resistant, Non-conductive bird

guard OD=300 MM, ID=33 MM, Width

=1.25 MM, one side cut from ID to OD. (All

Materials will be supplied by Agency)

Providing and fixing of LT Terminal

protectors i.e. Re-useable boot (LT Side

76 9926000096 1.1 kV) including LT (1.1 kV) insulating No

taps. All live part at LT side shall be

covered with fixing of LT insulating taps.

77 Nylon Net around Transformer Center

78 9926000097 Nylon Net (12 * 15 ft) Per Net 850

79 9926000098 Nylon Dori Per TC 200

Labour charge for fitting Nylon Net (All

80 9926000099 fabricated material for fitting nylon net shall Per TC

be provided by DGVCL)

Providing transformer Plinth of various

transformer centres by providing and fixing

RCC block in C.C. (1:2:4) in block of size

0.60M X 0.30M X 0.15M including Carting

the block at various transformer centre,

lifting the transformer from plinth by block

masonry in C.N. )1:6), placing transformer

in the position of the rising plinth with all

cost of material say cement, sand, centring

etc. labor and curing the block etc.

completely as per instruction of engineer in

(A) LINE MAINTENANCE

Cutting of Tree branches surounding HT/LT

1 9924000001 Per Tree

Replacement of old jumpers & providing

2 9924000002 new double jumpers with 8" binding [D No.

Type] & capsuling with PVC pipe etc

3 9924000005 Support pole for Stay PSC/STP/RSJ No. 633

Pin binding of conductor 11/22kv Pin

Pin binding of conductor 11/22kv Pin

5 9924000007 insulator per pole in costle area with No.

File No: DGVCLDOKI/TEN/e-file/6817/2026/2941/Account

Approved By: Executive Engineer,Technical,DGVCLDOKI

Letter No: DGVCLDOKI/0312/06/2026 Approved Date: 08-06-2026

Pin binding of conductor LT shakel

Replacement of one/both disc.insulator at

Replacement of LT shackle insulator at cut

9 9924000011 Refixing of V cross Arm No. 61

Replacement of V cross Arm (With

Transportation & Painting)

119924000013 Refixing of Top fitting in proper position No. 41

129924000014 Replacement of Top fitting No. 51

139924000015 Replacement of LT cross Arm No. 105

Providing DO fuse on DP with carting &

jumpuring(ONE DO FUSE)

Numburing of pole with paint by preparing

back ground of one colour and have

lettering(height 3" * width 0.5") using

169924000018 Fixing of MMB(1PH.) at consumer end No. 86

179924000019 Fixing of MMB(3PH.) at consumer end No. 128

Replacement of (1ph.) meter for Urban

199924000021 Replacement of (1ph.) meter for Rural area No. 74

painting consumer no. on MMB (Urban)

(with letter size height 40mm* width 8mm)

painting consumer no. on MMB (Rural)

(with letter size height 40mm* width 8mm)

Replacement of deteriorated Single phase

Fixing of new dist. Box with complete wiring

including clamps,nut bolts etc.

Reparing of guarding involving reshaping of

bearer wire cross lacing binding etc.

Painting of steel fabricated material of RSJ

DO DP structure with paint

Painting of steel fabricated material of RSJ

269924000028 pole mounted transformer double pole No.

structure with paint

Painting of steel fabricated material of RSJ

single pole with paint

painting of steel fabricated material of PSC

Single pole (HT line) with paint

painting of steel fabricated material of PSC

DO DP double pole with paint

painting of steel fabricated material of PSC

309924000032 double pole at pole mounted transformer No.

319924000033 Providing line seperater single phase No. 11

329924000034 Providing line seperater three phase No. 31

Replacement / Providing of stay insulator

339924000035 along with adjustment of tension in stay No.

File No: DGVCLDOKI/TEN/e-file/6817/2026/2941/Account

Approved By: Executive Engineer,Technical,DGVCLDOKI

Letter No: DGVCLDOKI/0312/06/2026 Approved Date: 08-06-2026

Replacement of deteriorated /providing

349924000036 LT dist. Box with new up to 100KVA No.

capacity & crediting it to store.

Replacement of deteriorated /providing

359924000037 LT dist. Box with new above 100KVA No.

capacity & crediting it to store.

369924000038 Adjustment of tension in stay wire No. 158

379924000039 Refitting of LA No. 31

Converting pin point to Shackle point

389924000040 location

including dismentaling & restringing etc.

replacement of 11KV Pin insulator with

providing new double pin binding

replacement of 22KV Pin insulator by new

409924000042 11kv pin insulator with spares & providing No.

new double pin binding

Providing 11kv double disc insulators with

binding & restringing

Replacement of existing 11kv conductor

429924000045 Cond/KM

(all size) with new double pin binding

Plumbing of PSC Pole with straightening at

Plumbing of PSC Pole with straightening at

Plumbing of tilted DP structure

459924000048 (PSC/RSJ/STP) with refilling of stone No.

Providing new 11kv AB /GO switch with

469924000049 fabrication and insulated colour code Set

jumper, binding, lugs etc

Replacement of old 11kv AB /GO switch

479924000051 with providing new insulated jumper, Set

binding, lugs etc

Providing cage type loop guard in verticle

489924000052 per pole

LT line with using PVC reel insulators etc

Labour charges for replacement /providing

499924000053 of MMB & service with all accessories for No.

three phase connection

Labour charges for replacement /providing

509924000054 of MMB & service with all accessories for No.

single phase connection

Dismentalling of existing Dist.X'mer

center(RSJ /STP POLE) 25/63/100/200

KVA with all fabrication & creditig the old

material to store

52 9924000056 Disconnection from LT pole 1 phase No.

Reconnection from LT pole 1 phase

( payment after receipt of R/C charges)

54 9924000058 Disconnection from LT pole 3 phase No.

Reconnection from LT pole 3 phase

( payment after receipt of R/C charges)

Dismentaling & removing of service line

from pole & crediting to S/dn (1 ph.)

File No: DGVCLDOKI/TEN/e-file/6817/2026/2941/Account

Approved By: Executive Engineer,Technical,DGVCLDOKI

Letter No: DGVCLDOKI/0312/06/2026 Approved Date: 08-06-2026

Dismentaling & removing of service line

from pole & crediting to S/dn (3 ph.)

Reconnection of service line complete with

PVC cable (1 Ph)

Reconnection of service line complete with

PVC cable (3 Ph)

Providing spiral type earthing by G.I. NO

8(weight 2kg -5mtr in length) with salt and

coal 10kg each, including pvc rigid pipe

60 9924000064 20mm dia( 1.5mtr length) to pass exposed No.

part of G.I. wire at consumer end with all

materials, earth resistance should be less

Providing and fixing of signle core 1.5 sq

mm single strand copper insulated cable

with cable nail clip for spiral type earthing

at consumer end. The end of G.I. no 8 is to

be connected by connector with copper

61 9924000070 cable of which other end shall be per meter

connected to the earth terminal of meter

box. This item shall be used in location

where there is more distance between

earth terminal and earthing terminal of

meter. (All materials supplied by contractor)

GPS Mapping survey of Existing Consumer

through GPS mapping application. (Only

62 Mahanagarpalika / Nagarpalika Area) (. no

(Excluding Apartment/ Complex

GPS Mapping survey of Existing Consumer

through GPS mapping application.

63 (Excluding Mahanagarpalika / Nagarpalika no

Area) . (Excluding Apartment/ Complex

DISMENTALING OF ALL TYPE OF

CONDUCTOR FOR 11/22KV & LT LINES

INCLUDING FIXING OF INSULATORS,

BINDING JUMPERING ETC.

Stringing of LT ABC of 1*35 SQ MM +

1*25 SQ MM including fitting of all

acessaries i.e. special design suspension /

tension clamp, fixing of cross arm, LT

shackle insulator etc. for fixing of

messenger wire and inclusive of

65 9924000065 dismantling charge of existing bare 65

conductor and crediting in to store &

dismentaling of service line from LT bare

conductor and to provide service

connection on Aerial Bunch Cable by

insulated pierceing connectors through

service connection box complete as

required & directed by Engineer in Charge.

File No: DGVCLDOKI/TEN/e-file/6817/2026/2941/Account

Approved By: Executive Engineer,Technical,DGVCLDOKI

Letter No: DGVCLDOKI/0312/06/2026 Approved Date: 08-06-2026

Stringing of LT ABC of 3*50 SQ MM +1*25

SQ MM+1*35 SQ MM including fitting of all

acessaries i.e. special design suspension /

tension clamp, fixing of cross arm, LT

shackle insulator etc. for fixing of

messenger wire and inclusive of

66 9924000066 dismantling charge of existing bare KM

conductor and crediting in to store &

dismentaling of service line from LT bare

conductor and to provide service

connection on Aerial Bunch Cable by

insulated pierceing connectors through

service connection box complete as

required & directed by Engineer in Charge.

Stringing of 11KV ABC of 3*95 SQ MM +80

SQ MM including fitting of all acessaries

i.e. special design suspension / tension

clamp, fixing of cross arm, binding to pin

67 9924000067 insulator,preparing shackle point,jumpers KM

etc. and inclusive of dismantling charge of

existing bare conductor and crediting in to

store complete as required & directed by

Engineer in Charge

Stringing of 22 KV ABC OF 3*70 SQ MM

+95 SQ MM including fitting of all

acessaries i.e. special design suspension /

tension clamp, fixing of cross arm, binding

to pin insulator,preparing shackle

point,jumpers etc. and inclusive of

dismantling charge of existing bare

conductor and crediting in to store

complete as required & directed by

Engineer in Charge

Stringing of LT ABC of 2*50 SQ MM +1*25

SQ MM+ 35 SQ MM including fitting of all

acessaries i.e. special design suspension /

tension clamp, fixing of cross arm, LT

shackle insulator etc. for fixing of

messenger wire and inclusive of

dismantling charge of existing bare

conductor and crediting in to store &

dismentaling of service line from LT bare

conductor and to provide service

connection on Aerial Bunch Cable by

insulated pierceing connectors through

service connection box complete as

required & directed by Engineer in Charge.

Laying,Testing & commissioning of

Specially designed 11 KV 55mm2 AAAC

70 9601000812 Medium Voltage Covered conductor as per KM

the technical specifications (with

File No: DGVCLDOKI/TEN/e-file/6817/2026/2941/Account

Approved By: Executive Engineer,Technical,DGVCLDOKI

Letter No: DGVCLDOKI/0312/06/2026 Approved Date: 08-06-2026

Labour charges for Lying of O/H XLPE

cable pole to pole

Supply & fixing of heat shrink type end

terminations (outdoor) for upto 11kV 3C x

185 mm2 size XLPE cable as per DGVCL

technical specification

Supply & fixing of heat shrink type end

terminations (indoor) for upto 11kV 3C x

185 mm2 size XLPE cable as per DGVCL

technical specification)

Providing and fixing of pipe type earthing

from 80 mm dia class-B GI pipe with pit to

be filled with salt & coke and construction

of chamber as per DGVCL Drg. No. dg

74 9925000016 /100 for DP and cable. The earthing pit No.

should be joined with cable by G.I. strip of

size 1” width & 2 mm thick. All material GI

pipe, Coke, Salt etc will be supplied by

Testing of cable at various points and

commissioning the feeder as per

75 9925000025 instruction of engineer-in-charge. Test No.

result shall be submitted by contractor with

Laying,Testing & commissioning

of Specially designed 11 KV AL-

76 59 ACS Medium Voltage Covered KM

conductor as per the technical

specifications (with accessories)

Laying,Testing & commissioning

of Specially designed 11 KV

55mm2 AAAC Medium Voltage

Covered conductor as per the

technical specifications (with

Providing and fixing Green HDPE

pipe ,size 160 mm Dia X 5 mm

thickness X 7 feet height . & GI

clamp size 25 X 3 mm (1 Round

clamp & 2 Nos C -type Clamp with NO

GI bolts – nuts (10 nos.) Danger

sign sticker with toll free number

of DGVCL embossed

File No: DGVCLDOKI/TEN/e-file/6817/2026/2941/Account

Approved By: Executive Engineer,Technical,DGVCLDOKI

Letter No: DGVCLDOKI/0312/06/2026 Approved Date: 08-06-2026

Model:ETP/HDR/17/2

Terminal Size: 25mmX 6mm

With clamp & 2 no’sof M10 size

SS nut & terminal to T/C neutral

using Bolts with connection of

earthling 25X 3mm Hot Dip GI

Transformer/ Earthling 04 Mtr GI

patti)Installation of Earthling PIT

includes supply and

labour for connectionall respect.

Dismental OF 100MM2

AAAC/MVCC CONDUCTOR

Supply and fixing of Suspenssion

clamp to Hold the cable (J-Hook)

TOTAL ESTIMATED AMOUNT OF

Total Amount of Work

Total Amount of Work

Note :- All Rates are

Excluding of GST.

File No: DGVCLDOKI/TEN/e-file/6817/2026/2941/Account

Approved By: Executive Engineer,Technical,DGVCLDOKI

Letter No: DGVCLDOKI/0312/06/2026 Approved Date: 08-06-2026

1. DGVCL will provide key material like M.S.

materials,ABC/Bare conductors,PSC/RSJ

Poles,Insulators,Fabricated materials etc. to the contractor.

2.All fabricated items shall be fabricated as per DGVCL

approved drawing and by welding rods confirming to the

relevent ISI specification and as directed by Engineer in

3.Necessary electricity connection for fabrictated items

shall be provided by DGVCL on payment of required charge

for connection & electricity bill of the same shall be paid by

4.All the rates are inclusive of PF and Exclusive of GST

applicable time to time.

5.All steel material are to be painted as below: Executive Engineer

(a) Scrubbing of rusted surface properly before applying DGVCL

the paints on to the RSJ poles & steel fabricated materials Kim Ind Division

of RSJ/PSC poles is must required.

(b) Two coats of approved ISI mark red oxide (primer) is to

be properly painted for the RSJ poles & steel fabricated

materials of RSJ/PSC poles.

(c) Two coats of approved ISI mark silver paint (i.e. triple

mangoes or equivalent quality silver paint) is to be properly

painted on to the RSJ poles & steel fabricated materials of

6. Qualified bidder has to work of TC HT booting, sleeve for

Busbar to Drop out fuse to Transformer H.T, Raising of

Plinth and maintenance of Overhead line under jurisdiction.

File No: DGVCLDOKI/TEN/e-file/6817/2026/2941/Account

Approved By: Executive Engineer,Technical,DGVCLDOKI