ARC for Repairing of Road Side Solder & Footpath Area at NA, GIDC Vapi

NAME OF WORK: ARC for Repairing of Road Side Solder & Footpath Area

at NA, GIDC Vapi

Tender Notice No. 07 of 2026-27 Sr No.

PRICE BID (PART-III)

1 Estimated cost : Rs.

2 Tender fee : Rs.4,248.00

4 The tender with DD for Tender fee & DD / FDR and 28/09/2026 to 15/10/2026

BG (Bank Guarantee) for EMD (by scanning) except

up to 16.00 hrs.

requireddocumentsmust upload on the web site of

www.gidc.nprocure.com

5 Date on (or before) which DD for Tender fee & DD / : 16/10/2026

FDR and BG (Bank Guarantee) for EMD in original

with required documents must reach in the office of

the In the Office of, The Notified Area Officer, NAA, up to 16.00 hrs.

GIDC, VAPI by Hand Delivery, R.P.A.D., or speed

6 Opening of Technical Bid : Dt.19/10/2026 @ 12.00 noon

7 Opening of Price Bid of Pre-Qualified Bidders Only : After finalization of qualified bidder

8 Eligible class of Registered : “B” Class & Above Registration

Name of Work: ARC for Repairing of Road Side Solder & Footpath Area at NA, GIDC Vapi

Item. Quantity Rate

Description Unit

Box cutting the road surface to proper slope and

camber for making a base for road work including

removing the excavated stuff and depositing on the

road side slope as directed upto 50Mt.lead.

Providing & laying of compacted Closed Graded

Granular sub base (GSB) in a layer of 150 mm

compacted thickness of graded granular material

consisting of Black trap Machine crushed stone

aggregate as per grading - I given in table 400-1 of

the specification MORT&H and compactor to the

required density with 8 - 10 tonne vibratory roller

2 with plain drum or heavy pneumatic tyred roller of 1.00 Cum

minimum 200 to 300 KN weight in all seasons as

per MORT&H , maintaining the required slope &

grade during the operation as approved by the

engineer in charge & watering to the proper

moisture content and sprinkled with the help of truck

mounted water tank fitted with suitable arrangement.

(fully saturated having CBR value minimum 30)

Providing and laying cement concrete 1:3:6 (1-

Cement : 3- coarse sand : 6- Graded stone

3 aggregates 20 mm nominal size) and curing 1.00 Cum

complete excluding cost of formwork in (A)

Foundation and Plinth

Providing and fixing pre-cast Rubber Dye / steel Dye

inter locking concrete block 60mm thick with grade

of concrete M300 pnumatic compressed / vibrated

mechanically and as per approved design

Confirming to IS 15658 : 2006 including 75 mm

Sand layer for levelling and filling the joint with sand

in proper line and level and slope with proper

watering compacting to meet requirement of Table -

300 - 2 incl. cost of sand.etc. below blocks , as

directed.perguidlines of IRC : SP 63-2018 etc.

Providing and laying approved quality and make

vibro press shot blasted ISI marked colored paver

Block (80mm thick) confirming to IS 15658:2006

duly approved by Engineer in charge and having

required strength for path way having min. strength

of 400 kg / cm2. Rate includes cost of all materials,

labour, transportation, equipments and all taxes etc.

incl. P/L 75 mm thick bedding layer of sand/grit

obtained from borrow pits with all lifts and lead,

transporting to site, filling in Footpath bedding

grading to required level and slope with proper

watering compacting to meet requirement of Table -

300 - 2 incl. cost of sand.etc. below blocks , as

Providing and fixing pre-cast vaccum wet pressed

concrete kerb stone of gray cement based concrete

block 60cm length,30cm height and 15cm thick of

6 M250 grade concret as per approved design and 1.00 Rmt

including excavation for fixing in proper line and

level,filling the joint with C:M 1:3 (1cement:3fine

sand) etc complete.

Taking out existing cc interlocking paverblock from

footpath / central verge incl removal of rubbish etc

7 disposal of unserviceble material to the dumping 1.00 Sq.M.

ground as per direction of enginer in charge

Laying old cc paverblock of any design / shape laid

in required line ,level , curvature with colour and

8 pattern over and incl cleaning, washing, 75mm thick 1.00 Sq.M.

compacted bed of coarse sand/Grit Powder, filling

the joints with fine sand etc all completed as per EIC

External wall painting (two coats pf priming coat +

two coats of paint) with APEX exterior paint of

Asian paints or equivalent of required shade or

equivalent including a priming coat of primer of

approved brand and manufacture on wall & any

other surfaces to give an even shade after

thoroughly brushing the surface & making the

surface free from mortar droppings and other foreign

matter and sand papered smooth incl. filling the all

small holes, cracks, open joints, undulations and

similar other minor defects of every kind with ready

made putty of approved brand and manufacture and

rubbed smooth with sand paper incl. necessary.

scaffoldings etc. complete at all floor levels

Providing and executing core drilling work of

different sizes diameter in all types of structural

concrete elements (RCC beams, columns, slabs,

walls), Precast Kerbs, and Precast Drains at all

10 heights and levels, including deployment of diamond 1.00 Rmt

core drill machine, core bits consumption, water

arrangement, anchoring, extraction of core samples

intact, cleaning, and site clearance, complete as

directed by the Engineer-in-Charge.

Providing & laying weep hole in Aburtments, and

returns by using A.C. pipe of 100mm including lying

in proper grede and jointing the completed as per

detailed specification

12 Brick work using common burnt clay building bricks 1.00 Cum

of IInd class having crushing strength not less than

35 kg/cm2 for foundation, plinth and superstructure

above plinth level up to floor two level in CM 1:6 (1-

cement : 6-coarse sand) incl. racking out joints

20mm deep to expose faces & the joints should be

struck flush to expose faces incl. Curing, scaffolding

etc. complete etc. at all levels

TOTAL AMOUNT IN Rs.

TOTAL AMOUNT IN Rs.

*THE RATES IN SCHEDULE-B ARE EXCLUDING GST.

I / We agree to carry out the above work at ____________ % above the estimated rate ((In Words)

_________________________________________________) percentage above the Estimated Tender Rate.

I / We agree to carry out the above work at ____________ % below the estimated rate ((In Words)

_________________________________________________) percentage below the Estimated Tender Rate.

Estimated Amount Estimated Amount

Put to Tender Rs. 1,99,99,950.00 Put to Tender Rs.

Add % Above Rs.__________ Deduct % Below Rs. ____________

Net Amount Rs.__________ Net Amount Rs._____________

Net In Figure Rs. _____________ Net in Figure Rs. ______________

I / We have read the Condition mentioned in this tender and agree to abide by the same.

Signature of Contractor Chief Office