J&K

Active

Works

Repair and Maintenance Works

Repairs and Maintenance of various Snow Machines viz. Snow Cats (1st, 3rd, 4th, 6th, 8th, 11th, 12th and 15th) and Snow Machines ( MC 16, 43, 60, 61, Leyland 2nd, GURU 1st and 4th and Unimog of SCCR Shopian of Mechanical and Hospital Sub-Division 2nd

Public Works Department

SCCR Shopian | Shopian, Jammu And Kashmir

Amount: ₹2.7 LCloses: 8 Oct 20265d left

Timeline

Published30 Sept 2026
Closes8 Oct 2026
Bid Opening9 Oct 2026

Tender Value

₹2.7 L

EMD Value

₹5,430

Closing Date

8 Oct 2026, 2:00 pm5d left

Tender Inviting Organisation

Name

Executive Engineer

Address

Office of the Executive Engineer Mechanical and Hospital Division Anantnag

Work Description

Repairs and Maintenance of various Snow Machines viz. Snow Cats (1st, 3rd, 4th, 6th, 8th, 11th, 12th and 15th) and Snow Machines ( MC 16, 43, 60, 61, Leyland 2nd, GURU 1st and 4th and Unimog of SCCR Shopian of Mechanical and Hospital Sub-Division 2nd

Tender Information

Tender ID

2026_PWDJK_326664_2

Reference Number

MHDA/TS/2026-27/63

Tender Type

Open Tender

Product Category

Repair and Maintenance Works

Form of Contract

Percentage

Period of Work

10 days

Location

SCCR Shopian

Source Website

Subscribe to view

Eligibility / Pre-Qualification

Refer NIT

Documents Required

7 documents required · 7 mandatory

Fee/PreQual/Technical

RequiredScanned copy of Tender Document Cost as per NIT (.pdf)

RequiredScanned copy of Earnest Money Deposit as per NIT (.pdf)

RequiredScanned copy of GST registration, latest form GSTR-3B and PAN Card as per NIT (.pdf)

RequiredScanned copy of Accepted/Confirmed of Annexures of NIT (.pdf)

RequiredScanned copy of contractors registration card on JKPWDOMS as per NIT (.pdf)

RequiredScanned copy of proof of having executed mechanical nature of works as per NIT (.pdf)

Finance

RequiredBOQ (.xls)

Fee & Financial Details

Tender Fee Amount

₹200

Tender Fee Payable To

Executive Engineer M and H Division Anantnag

EMD Fee Amount

₹5,430

Important Dates

Last Activity

30 Sept 2026

Published

30 Sept 2026

Bid Opening

9 Oct 2026

Download Starts

30 Sept 2026

Download Ends

8 Oct 2026

Submission Starts

30 Sept 2026

Bill of Quantities

PercentageBoQ_Ver4.0INR

This is a percentage-rate BOQ. The schedule below shows estimated quantities and rates. Bidders quote a single percentage above or below the total estimated cost.

BoQ1 (11 items)

Sl No	Description	Qty	Unit	Est. Rate	Est. Amount
1	PROVIDING AND FITTING OF DOUBLE CLUTCH ASSEMBLY ALONG WITH CLUTCH BEARING(6010). THE JOB INCLUDES REMOVING OF ANY KIND OF WELDED JOINTS OF THE SUPPORTING FRAME BY SUITABLE MEANS SO AS TO SLIDE THE ENGINE ASSEMBLY TO PROPER POSITION TO REPLACE THE DAMAGED CLUTCH DRESSER BY NEW ONE .(AS RECOMMENDED BY OEM). THE TOOLS AND TACKLES REQUIRED ARE TO BE PROVIDED BY THE EXECUTING AGENCY.(S/C 4th and 6th)	2	Job	64,500	₹1,29,000
2	Fixing of cutting edges to the fixed snow plough . The job includes removing of the worn-out cutting edges and then cutting/ trimming of the new cutting edges as per plough profile by using a gas cutter. The job further includes drilling of 16 No holes on the new cutting edges in accordance with the holes on the base of the snow plough. The job also includes providing and fitting of 16 no. nuts bolts M18 of 80 mm long(S/C 1,3,4,6,8,11,12 and15)	4	Job	3,500	₹14,000
3	Repairs to the fixed plough assembly. The job includes dismounting of the plough from the machine and removing of bends by heating, pressing, hammering and welding at damaged/cracked spots..The job also includes alignment of the blade frame.(S/C 1,3,4,6,8,11,12 and15)	4	Job	2,500	₹10,000
4	Providing and Fitting of Propeller Shaft( Part No. F10107040) with Yokes and Bolts (Complete) for Snow Cat 12th Make Farmtrac Model 6090	1	Job	10,000	₹10,000
5	Fixing of cutting edges to the fixed snow plough. The job includes removing of the worn-out cutting edges and then cutting/ trimming of the new cutting edges as per plough profile by using a gas cutter. The job further includes drilling of 18 No holes on the new cutting edges in accordance with the holes on the base of the snow plough. The job also includes providing and fitting of 18 no. nuts bolts M18 of 80 mm (M/C 16)	1	Job	3,800	₹3,800
6	Repairs to the fixed plough assembly. the job includes dismounting of the plough from the machine and removing of bends by heating, pressing, hammering and welding at damaged /cracked spots. The job also includes repairing to the hydraulic jack by way replacing jack kit and strengthening of base plate by way of welding and replacing wornout nuts and bolts.(M/C16)	1	Job	2,000	₹2,000
7	Fixing of cutting edges to the Variable snow plough. The job includes removing of the worn-out cutting edges and then cutting/ trimming of the new cutting edges as per plough profile by using a gas cutter. The job further includes drilling of 18 No holes on the new cutting edges in accordance with the holes on the base of the snow plough. The job also includes providing and fitting of 18 no. nuts bolts M18 of 80 mm. (M/C43 and 61)	2	Job	4,000	₹8,000
8	Fixing of cutting edges to the variable snow plough. The job includes removing of the worn-out cutting edges and then cutting/ trimming of the new cutting edges as per plough profile by using a gas cutter. The job further includes drilling of 24 No holes on the new cutting edges in accordance with the holes on the base of the snow plough. The job also includes providing and fitting of 24 no. nut bolts M16 of 80 mm long.(M/C 60, Leyland 2nd,Guru 1st and 4th) )	2	Job	4,750	₹9,500
9	Fixing of cutting edges to the Variable snow plough. The job includes removing of the worn-out cutting edges and then cutting/ trimming of the new cutting edges as per plough profile by using a gas cutter. The job further includes drilling of 20 No holes on the new cutting edges in accordance with the holes on the base of the snow plough. The job also includes providing and fitting of 20 no. nuts bolts M18 of 80 mm. (Unimog Shopian)	1	Job	4,300	₹4,300
10	REPAIRS TO THE VARIABLE PLOUGH ASSEMBLY. THE JOB INCLUDES DISMOUNTING OF THE PLOUGH FROM THE MACHINE AND REMOVING OF BENDS BY HEATING, PRESSING, HAMMERING AND WELDING AT DAMAGED /CRACKED SPOTS. (M/C43,60,61,Leyland 2, Guru1st and Guru 4th) inclusive of material.	3	Job	2,000	₹6,000

Documents

Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.

Tender Page Snapshot

details.html

html • 0.03 MB

NIT Documents

Tendernotice_1.pdf

PDF • 0.75 MB

Work Item Documents

BOQ_1105049.xls

BOQ • 0.37 MB

Ready to Participate?

Download all tender documents and submit your bid

Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .

Loading…

Sl No

Description

Qty

Unit

Est. Rate

Est. Amount

PROVIDING AND FITTING OF DOUBLE CLUTCH ASSEMBLY ALONG WITH CLUTCH BEARING(6010). THE JOB INCLUDES REMOVING OF ANY KIND OF WELDED JOINTS OF THE SUPPORTING FRAME BY SUITABLE MEANS SO AS TO SLIDE THE ENGINE ASSEMBLY TO PROPER POSITION TO REPLACE THE DAMAGED CLUTCH DRESSER BY NEW ONE .(AS RECOMMENDED BY OEM). THE TOOLS AND TACKLES REQUIRED ARE TO BE PROVIDED BY THE EXECUTING AGENCY.(S/C 4th and 6th)

Job

64,500

₹1,29,000

Fixing of cutting edges to the fixed snow plough . The job includes removing of the worn-out cutting edges and then cutting/ trimming of the new cutting edges as per plough profile by using a gas cutter. The job further includes drilling of 16 No holes on the new cutting edges in accordance with the holes on the base of the snow plough. The job also includes providing and fitting of 16 no. nuts bolts M18 of 80 mm long(S/C 1,3,4,6,8,11,12 and15)

Job

3,500

₹14,000

Repairs to the fixed plough assembly. The job includes dismounting of the plough from the machine and removing of bends by heating, pressing, hammering and welding at damaged/cracked spots..The job also includes alignment of the blade frame.(S/C 1,3,4,6,8,11,12 and15)

Job

2,500

₹10,000

Providing and Fitting of Propeller Shaft( Part No. F10107040) with Yokes and Bolts (Complete) for Snow Cat 12th Make Farmtrac Model 6090

Job

10,000

₹10,000

Fixing of cutting edges to the fixed snow plough. The job includes removing of the worn-out cutting edges and then cutting/ trimming of the new cutting edges as per plough profile by using a gas cutter. The job further includes drilling of 18 No holes on the new cutting edges in accordance with the holes on the base of the snow plough. The job also includes providing and fitting of 18 no. nuts bolts M18 of 80 mm (M/C 16)

Job

3,800

₹3,800

Repairs to the fixed plough assembly. the job includes dismounting of the plough from the machine and removing of bends by heating, pressing, hammering and welding at damaged /cracked spots. The job also includes repairing to the hydraulic jack by way replacing jack kit and strengthening of base plate by way of welding and replacing wornout nuts and bolts.(M/C16)

Job

2,000

₹2,000

Fixing of cutting edges to the Variable snow plough. The job includes removing of the worn-out cutting edges and then cutting/ trimming of the new cutting edges as per plough profile by using a gas cutter. The job further includes drilling of 18 No holes on the new cutting edges in accordance with the holes on the base of the snow plough. The job also includes providing and fitting of 18 no. nuts bolts M18 of 80 mm. (M/C43 and 61)

Job

4,000

₹8,000

Fixing of cutting edges to the variable snow plough. The job includes removing of the worn-out cutting edges and then cutting/ trimming of the new cutting edges as per plough profile by using a gas cutter. The job further includes drilling of 24 No holes on the new cutting edges in accordance with the holes on the base of the snow plough. The job also includes providing and fitting of 24 no. nut bolts M16 of 80 mm long.(M/C 60, Leyland 2nd,Guru 1st and 4th) )

Job

4,750

₹9,500

Fixing of cutting edges to the Variable snow plough. The job includes removing of the worn-out cutting edges and then cutting/ trimming of the new cutting edges as per plough profile by using a gas cutter. The job further includes drilling of 20 No holes on the new cutting edges in accordance with the holes on the base of the snow plough. The job also includes providing and fitting of 20 no. nuts bolts M18 of 80 mm. (Unimog Shopian)

Job

4,300

₹4,300

REPAIRS TO THE VARIABLE PLOUGH ASSEMBLY. THE JOB INCLUDES DISMOUNTING OF THE PLOUGH FROM THE MACHINE AND REMOVING OF BENDS BY HEATING, PRESSING, HAMMERING AND WELDING AT DAMAGED /CRACKED SPOTS. (M/C43,60,61,Leyland 2, Guru1st and Guru 4th) inclusive of material.

Job

2,000

₹6,000