Loading
Loading…
Loading…
| # | Company | Quoted % | Amount | Rank | Status |
|---|---|---|---|---|---|
| 1 | L1₹1.5 LAdmitted-Fee/PreQual/Technical/Finance NEAR DAV HIGH SCHOOL MOHAN BAZAR PATHERDIH P O PATHERDIH DHANBAD 828302 JHARKHAND | DHANBAD | DHANBAD | JHARKHAND | 828302 | -11.60% | ₹1.5 L | L1 | Admitted-Fee/PreQual/Technical/Finance |
| 2 | L2₹2.2 L+₹68,990.68 (46.8%)Admitted-Fee/PreQual/Technical/Finance | +10.00% | ₹2.2 L+₹68,990.68 (46.8%) | L2 | Admitted-Fee/PreQual/Technical/Finance |
Tender Value
₹2.0 L
EMD Value
₹2,500
Closing Date
25 May 2026, 3:00 pmClosed
ACE, E.J Area
EJ Area Office, Bhowra
Construction of Temporary Transformer and switch shed at C2 Patch at Bhowra under EJ Area
2026_BCCL_360070_1
BCCL/EJA/CIVIL/2026-27/eNIT/03
Open Tender
Civil Works - Buildings
Percentage
5 days
Bhowra
Please refer Tender documents
3 documents required · 3 mandatory
₹2,500
29 May 2026
22 May 2026
25 May 2026
22 May 2026
25 May 2026
22 May 2026
22 May 2026 - 23 May 2026
This is a percentage-rate BOQ. The schedule below shows estimated quantities and rates. Bidders quote a single percentage above or below the total estimated cost.
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 2 | Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.All kinds of soil. | 3.11 | M3 | 214.15 | ₹666.01 |
| 3 | Supplying and filling in plinth with sand under floors, including watering, ramming, consolidating and dressing complete. | 0.08 | M3 | 1,292.2 | ₹103.38 |
| 4 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:4:8 (1 Cement : 4 coarse sand (zone-III) derived from natural sources : 8 graded stone aggregate 40 mm nominal size derived from natural sources). | 0.34 | M3 | 5,120.95 | ₹1,741.12 |
| 5 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :1:1½:3 (1 Cement: 1½ coarse sand (zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources). | 0.62 | M3 | 6,422.25 | ₹3,981.8 |
| 6 | Analysis Rate for Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. | 1,226.82 | KG | 29.95 | ₹36,743.26 |
| 7 | Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+ 0.05 %) total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. | 94.01 | M2 | 546.2 | ₹51,348.26 |
| 8 | Analysis Rate for Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+ 0.05 %) total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. | 35.12 | M2 | 106.75 | ₹3,749.06 |
| 9 | Extra for providing and fixing wind ties of 40x 6 mm flat iron section. | 64.01 | M | 131.8 | ₹8,436.52 |
| 10 | Surface dressing of the ground including removing vegetation and in-equalities not exceeding 15 cm deep and disposal of rubbish, lead up to 50 m and lift up to 1.5 m. All kinds of soil | 81.94 | M2 | 20.4 | ₹1,671.58 |
| 11 | Supplying and filling in plinth with sand under floors, including watering, ramming, consolidating and dressing complete. | 6.24 | M2 | 1,290.2 | ₹8,050.85 |
stage.html
html • 0.02 MB
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.05 MB
Tendernotice_1.pdf
PDF • 2.91 MB
BOQ_372936.xls
BOQ • 0.27 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .