Loading
Loading…
Loading…
Tender Value
₹2.4 Cr
EMD Value
₹2.7 L
Closing Date
31 Dec 2025, 3:00 pmClosed
No
No
Single Packet System
Normal Tender
No
Not Applicable
Lowest to Highest
60 days
Expenditure
Capital (Works)
Above/Below/Par
SIGNAL
14 conditions · 3 needing a document upload
The tenderer must have minimum average annual contractual turnover of [V/N] or 'V' whichever is less;; where V=Advertised value of the tender in crores of Rupees N=Number of years prescribed for completion of work for which bids have been invited. The average annual contractual turnover shallbe calculated as anaverage of "total contractualpayments" in the previous three financial years, as per the audited balance sheet. However, in casebalance sheet of the previous year is yet to be prepared/ audited, the audited balance sheet of thefourthpreviousyearshall beconsideredfor calculatingaverage annualcontractual turnover. The tenderers shall submit requisite information as per Annexure-VIB, along with copies of AuditedBalance Sheets duly certified by the Chartered Accountant/ Certificate from Chartered Accountantdulysupported byAudited BalanceSheet.
The tenderers shall submit requisite information as per Annexure-VIB, along with copies of Audited Balance Sheets duly certified by the Chartered Accountant/ Certificate from Chartered Accountant duly supported by Audited Balance Sheet.
The tenderer must have successfully completed or substantially completed any one of the following categories of work(s) during last 07 (seven) years, ending last day of month previous to the one in which tender is invited: (i)Three similar works each costing not less than the amount equal to 30% of advertised value of the tender, or (ii)Two similar works each costing not less than the amount equal to 40% of advertised value of the tender, or (iii) One similar work costing not less than the amount equal to 60% of advertised value of the tender.
4 conditions · 2 needing a document upload
Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.
Definition of Similar Nature of Work for this work -"Any work of EI /PI/RRI work which include indoor signaling work. OR RDSO approved OEM for EI"
Replacement of Electronic Interlocking System of Warm Standby and Indoor Signalling gears on age cum condition basis at Dhaurmui Jaghina (DUM) station on Kota Division.
KOTA-SNT-SIG-2024-16-R1~WCR
KOTA-SNT-SIG-2024-16-R1
Open
Works - General
12 Months
Kota, Rajasthan
₹0
₹2.7 L
31 Dec 2025
1 Dec 2025
17 Dec 2025
153 items across 2 schedules · ₹2,40,97,300.67 total
| # | Description | Unit | Qty | Rate | Amount |
|---|---|---|---|---|---|
| 1 | Design, manufacture and Supply of EI system... as per anexure-A-1-EI. THIS ITEM UNIT WILL BE "per station" | Per Unit | 1.00 | 1,09,54,595.02 | 1,09,54,595.02 |
| 2 | Supply of "Instruments and tool kits required for Trouble Shooting and repair of hardware and software for EI system should be supplied for stations as per schedule item 1 of EI above. (This includes tools required for EI maintenance sorts of crimping,insertion, removal, general purpose,tools like screw drivers, spanneers,PCB extractors, temp controlled slodering iron, wire cutter, nose pliers etc. & measuring instruments with carrying case/ holders/cabinet for technicians and J.E for testing,maintenance and repair at site) two sets. Each set comprises of the following: i)Crimping tools for all types of special cable assembly used in EI system. ii) Insertion tools for all types of Special cables assembly used in EI system. iii)Removal tools or all types of Special cables assembly used in EI system. iv)Digital multimeter(Fluke 111 or better) v)Steel cabinet/Almirah/ size 1980mm height, 915 mm width and 485 mm depth( godrej make/Jalaram) of good quality to store tools, spare cards and documents. vi)Steel book rack Size:1850mm*900mm*316mm (H*W*D)for keeping documents (Godrejmake/Jalaram). vii)Clamp earth tester viii) Clamp current meter.Note:- Any other Tools required for truoble shooting and repair and recommended by OEM shall be supplied by contrcator free of cost Note: Tool kit supplied by contractor will have to be certified by OEM that these tools are sufficient for maintainence/ Repair/ Troubleshooting.Per Unit = Per Station. | Per Unit | 1.00 | 60,613.47 | 60,613.47 |
| 3 | Supply of powder coated Main Cable Termination rack complete with scaffolding, fixtures & accessories including square bars for mounting 8-way terminal blocks/wagos, ladder, string rods, frame, base assembly, insulators, J-bolt, nut/bolts & fasteners, phenolic laminated sheet board etc. Siemens type & as per extant practice on W.C. Rly. Typical part list as per Annexure 'K' for 3-way and Annexure 'L' for 2-way attached and Rack arrangement as per WCR DRG. No. S&T EQPT. BLDG/2013/Pt. 1/4 and Rack plan as approved by Engineer incharge. "The given rate is of 1-way cable termination rack." | Set | 4.00 | 46,959.64 | 1,87,838.56 |
| 4 | Supply of powder coated Relay Rack Assembly Complete with scaffolding, fixtures and accessories including MS Bars for fixing of relay plug board, string rods, fuse strips with bracket, 11-Way Bus Bars with cover and mounting brackets ,runway for cable/wires, frame base assembly with IDF pillar etc. Siemens type & as per extant practice on W.C. Rly. Typical part list as per Annexure 'J' attached and Rack arrangement as per WCRDRG. No. S&T EQPT.BLDG/2013/Pt. 1/4 and Rackplan as approved by Engineer incharge. | Set | 1.00 | 28,590.83 | 28,590.83 |
| 5 | (i) Supply of 4 conductor disconnect terminal block with test & measurement facility, with screw less, spring cage clamp connections suitable for 0.08 to 2.5 Sq.mm conductor with current capacity of 16 Amps as per RDSO Spcn. No. RDSO/SPN/189/2004 Ver. 3.0 or latest. | Numbers | 2002.00 | 66.79 | 1,33,713.58 |
| 6 | (ii) Supply of End plate compatible to above screwless terminals. The end plates shall be of different colour than that of disconnect terminal blocks. | Numbers | 200.00 | 12.87 | 2,574 |
| 7 | Supply of Din rail of dimension 35mm x 7.5mm, 1 mm thickness, 1Mtr length, slotted compatible to above terminals. of reputed make make. | Numbers | 1.00 | 115.99 | 115.99 |
| 8 | Supply of End Stop 10mm for above Din 35 Rail of reputed make make. | Numbers | 200.00 | 11.37 | 2,274 |
| 9 | Supply of PVC indoor cable 1x24x1 mm dia colour coding of insulation of inner core shall be in six colour viz. Blue, Red, Green, Grey, Brown & Black conforming toIRS 76/89 or latest. | Kilometre | 3.00 | 1,91,909.14 | 5,75,727.42 |
| 10 | Supply of PVC indoor cable 1x60x0.6 mm dia colour coding of insulation of inner core shall be in six colour viz. Blue, Red, Green, Grey, Brown & Black conforming toIRS 76/89 or latest. | Kilometre | 0.20 | 1,90,483.65 | 38,096.73 |
| 11 | Supply of PVC indoor cable 1x24x0.6 mm dia colour coding of insulation of inner core shall be in six colour viz. Blue, Red, Green, Grey, Brown & Black conforming to IRS 76/89 or latest. | Kilometre | 0.20 | 1,32,805.35 | 26,561.07 |
| 12 | Supply of flexible multistrand copper wire size 16/0.2 to IS 694 of various colours suitable for wiring of 'Q' series realys. The contractor shall obtain approval for colour wise quantiy from executive incharge before placing order for this item. | Kilometre | 1.00 | 8,791.4 | 8,791.4 |
| 13 | Supply of dual fuse alarm system / fuse fail indication cum monitoring and automaticchange over system for vitalfuses as per draft specificationNo. RDSO/SPN/209/2012 Ver2.0 or latest. This consists fuses of different ratings as 0.6A, to 16A. Number of fuses of ratings to be decided as per site requirent and Engineer In-charge. (01 Numbers= 01 Fuse).Spares to be provided as per RDSO Spcifications. | Numbers | 230.00 | 1,165.5 | 2,68,065 |
| 14 | "Supply of relay QN1 (Non ACimmunized relay), 8F/8B (24V/50V)along with plug board (Base plate),retaining clips and connectorsconforming to BRS:930, IRS:S34 &IRS:S23 as required. | Numbers | 2.00 | 4,766.84 | 9,533.68 |
| 15 | Supply of QNNA1 (AC immunisedrelay), twin relays 24V DC, 6F/2B or 4F/4B (as required)along with plugboard (Base plate), retaining clipsand connectors confirming toBRS:960, IRS:S34 & IRS:S23. | Numbers | 2.00 | 3,680.61 | 7,361.22 |
| 16 | Supply of QNA1K (AC immunisedrelay), 6F/6B, 24VDC along with plugboard (Base plate), retaining clipsand connectors conforming toBRS:931A, IRS:S34 & IRS:S23. | Numbers | 2.00 | 6,214.15 | 12,428.3 |
| 17 | Supply of Relay plug in type styleQL1 magnetically latched neutral line relay, 24 V DC, Metal to Carbon Contacts complete with plug board, retaining clip & Connectors conforming to BRS: 935A, IRS: S@ 45"38@ IRS: S-23 or latest 11F/4B Front &Back contacts for interlocking code for this unit shall be ABDEG. | Numbers | 4.00 | 6,225.53 | 24,902.12 |
| 18 | Supply of QSPA1, 24VDC, Slow topick up,8F/4B along with plug board(Base 43 plate), retaining clip andconnectors conforming toBRS:933A,IRS:S60 & IRS:S34.Material inspected by RDSO | Numbers | 4.00 | 6,091.41 | 24,365.64 |
| 19 | Supply of Relay Ac Immune, Plug in type, Style QBCA-1, DC Biased Point Contactor, 24V DC, 2F DC, 2HF-4BContacts Front Contacts Heavy Duty and Back Contacts Metal to Carbon Complete with Plug Board, Retaining Clips and Connectors, Conforming to BRS 943, IRS S 34 and IRS S 23.Material inspected by RDSO | Numbers | 4.00 | 5,672.44 | 22,689.76 |
| 20 | Supply of Q-Series Line Relay (QNA1 Type),AC immunized, 8F/8B, 24 V DC along with plug board (base plate), connectors, retaining clips etc and conforming to BRS-931A and RDSO Specn.No.IRS:S@ 45"44@ S-23 and S-60 or latest. The interlocking code for this unit shall be ""ABDGH"". Inspection authority:- RDSO Inspection charges:- Borne by Railways Payment Terms:- 100% after supply. | Numbers | 4.00 | 3,913.67 | 15,654.68 |
| 21 | Supply of Insulation MAT for Electrical purpose 2.2 mm thick size 2m x 1m x suitable for 3.3 KV to 11KV (Class B) conforming to IS- 15652-2006 | Sqm | 4.00 | 1,699.74 | 6,798.96 |
| 22 | Supply of Protocol converter for interface the data logger and the EI system suitable for above data logger. Any other equipment/Connector/Cable required to connect EI to datalogger wil have to be supplied by Contractor at his own cost. | Numbers | 2.00 | 23,258.03 | 46,516.06 |
| 23 | Supply of Automatic Media Change Over of Modem working on redundant channels for data transmission on OFC/QUAD/MICROWAVE Radio. Qty.01 Pair & Modems for UFSBI (for use with secondary media OFC/QUAD) Qty. 01 Pair. Make DES(Delron Elecronic System only). | Pair | 1.00 | 91,230.29 | 91,230.29 |
| 24 | Supply of Modem compatible with existing UFSBI system of DES make or similar as per Specn No. IRS:S-105/2012 (Ver.0) or latest suitable to interface with OFC fiber (Optical Modem) for Deltron make UFSBI provided in Kota division. | Pair | 1.00 | 26,010.98 | 26,010.98 |
| 25 | Fabrication, supply & screen printing of SWR, Track bonding plan, RSP board on white formica of 1200x600x3mm as per instruction of site engineer. Proportionate payment will be made if size of board get increased or decreased. | Numbers | 3.00 | 5,225.69 | 15,677.07 |
| 26 | Supply of Professional AC/DC clamp meter for Low current. High resolution of 1mA on AC/DC ranges, wide measurement range upto 100A . True RMS measuremen.Model - 3540 Koico/ Stanly SCM 222 or equivalent. Meter shall first inspected by divisional/ Site incharge/ Consignee. | Numbers | 1.00 | 21,755.28 | 21,755.28 |
| 27 | "Supply of Hand Held 100 KHz True RMS Digital Multimeter of specification like DC and AC Voltage Range (660mV- 1000V) Voltage resolution range DC/AC (100 microVolt-100 miliVolts). DC and AC Current Range- (66mA-10A), Frequency ranges (upto 10MHz with resolution 0.01HZ) . Model Rishabh 616 or better specifications." | Numbers | 1.00 | 9,907 | 9,907 |
| 28 | Supply of Hylem Sheet resin bonded 10 mm thick , grade P3 in standard size of 1.22 X 1.22 meter as per specification IS 2036 of 1974 .OEM /authorised dealers gaurantee certificate to be submitted at the time of the supply. | Numbers | 4.00 | 4,000.59 | 16,002.36 |
| 29 | Supply of Self supporting foldable ladder heavy duty made of Aluminium c section size 66 mm x 31 mm x 3 mm and climbing steps made of aluminium 112 mm wide (4.5 inch) on front side & back side (1 inch) , having service platform at the top size 16 inch x12 inch & rubber shoes are fitted at four legs. size 6 feet height RISHABH make RQPC model No. 501. | Numbers | 1.00 | 9,658.37 | 9,658.37 |
| 30 | Supply of Thermo shrink Jointing Kit for jointing underground 0.9 mm dia. cond. 4/6 quad cables as per specn No. IRS: TC- 77/2012 (Rev.3.0) with Amend. 1, 2 & 3 or latest. | Numbers | 6.00 | 3,402.91 | 20,417.46 |
| 31 | Supply of Main Signal Post 140 mm outer dia 4.6 Mtr Length as per specification No. IRS: S-6 with latest amendment. | Numbers | 1.00 | 8,951.24 | 8,951.24 |
| 32 | Supply of Cast iron main signal surface base 140mm as per specification No. IRS: S-10 and Drg No. S-2011/M with latest amendment, with CLS Ladder assembly complete and ladder base for CLS signal 3.6 mtrs/ 4.6 Mtrs./ 5.6 Mtrs. long as per RDSO Drg. No. SA-23150/23153/23156 (Adv.) with latest amendment. This also include, signal front & Back staging complete assembly for CLS unit as per Drg. No. RST/11413. | Numbers | 1.00 | 13,922.47 | 13,922.47 |
| 33 | Supply of Non Metallic (FRP) colour light signal housing multi unit type for railway signaling suitable for RE area TWO Aspects. Complete without lenses, lamps and signal transformer as per RDSO DRG. No. SA 23003A/M Adv. Alt- S and as per SPEC. No. RDSO/SPN/194/2006 (Rev 2.0) or latest and FRP material as per RDSO SPEC. No. RDSO/SPN/151/1997 or latest. | Numbers | 4.00 | 23,636.24 | 94,544.96 |
| 34 | Supply of Non Metallic (FRP) colour light signal housing multi unit type for railway signaling suitable for RE area THREE Aspects. Complete without lenses, lamps and signal transformer as per RDSO DRG. No. SA 23002A/M Adv. Alt- S and as per SPEC. No. RDSO/SPN/194/2006 (Rev 2.0) or latest and FRP material as per RDSO SPEC. No. RDSO/SPN/151/1997 or latest. | Numbers | 2.00 | 24,761.77 | 49,523.54 |
| 35 | Supply of Non Metallic (FRP) colour light signal housing multi unit type for railway signalling suitable for RE area FOUR Aspects. Complete without lenses, lamps and signal transformer as per RDSO DRG. No. SA 23001A/M Adv. Alt- S and as per SPEC. No. RDSO/SPN/194/2006 (Rev 2.0) or latest and FRP material as per RDSO SPEC. No. RDSO/SPN/151/1997 or latest. | Numbers | 1.00 | 26,270.35 | 26,270.35 |
| 36 | Supply of LED Multi lamp Route Indicator ( Double digit (1-19))similar to M/S Efftronics make specification) | Numbers | 1.00 | 1,01,205.65 | 1,01,205.65 |
| 37 | Supply of Shunt Signal Post complete with Base. GI Pipe, 'B' class of 80mm Dia. of min. 1 meter length to be supplied by the contractor. | Numbers | 2.00 | 3,564.2 | 7,128.4 |
| 38 | Supply of position light LED based shunt signal unit (as per RDSO Drg. No. SA- 23840). | Numbers | 2.00 | 12,613.89 | 25,227.78 |
| 39 | Supply of Off-Set bracket 5-1/2 '' for Signals & Routes as per Specification No. IRS: S-10/78 and Drg no. SA-23080(Adv) Alt-1 or with latest amendment. | Numbers | 1.00 | 1,317.07 | 1,317.07 |
| 40 | Supply of Retro reflective Signal No. plates as perIRSEM Drg No. 19-D10 with clamps, nut, bolts and other accessories required for Fixing. | Numbers | 2.00 | 646.65 | 1,293.3 |
| 41 | Supply of Pad Locks 50 mm with common key make Godrej / Navtal only. | Numbers | 4.00 | 353.02 | 1,412.08 |
| 42 | Supply of Earth Electrode assembly as per Drg. No. S&T/CON/KOTA/EARTHING/01 ALT - 01. All nut, Bolts & Lugs to be of stainless steel. The earth electrode pipe shall be 'B' Class/ Medium Grade as per Specification No. IS: 1239 Pt. 1/ 2004 of Nominal Inner Dia 50mm, Outside dia (Max 60.8 mm, Min 59.7 mm), Thickness (3.6mm), Tolerance in Thickness ('+' not limited, '-' 12.5 percent). | Numbers | 2.00 | 1,313.36 | 2,626.72 |
| 43 | Supply of Electric Point Machine IRS make 110V DC operation (AC immunity 160V) NONTRAILABLE, complete with lock, detector, cable termination box and slides for lock and detector (Rotary locking) as per specification no. IRS: S-24/2002 amendment-1 or latest, requirement of point machine is 143 mm throw only as per RDSO Drg. No RDSO/S-10800. | Numbers | 2.00 | 82,137.5 | 1,64,275 |
| 44 | Supply of Ground Connection complete set suitable for IRS type Point machine for ordinary turnout of 60 Kg rails as per RDSO Drg. RDSO-S-3361. | Numbers | 2.00 | 11,205.57 | 22,411.14 |
| 45 | Supply of G. I. Bend pipe, 'B' Class/ Medium Grade, 50 mm Dia & 1.2 M straight length and having fixing plate welded with bent pipe as per Drg. No. Dy.CSTE(Con)/Kota/5 for point machine cable entry. | Numbers | 2.00 | 393.83 | 787.66 |
| 46 | Supply of Pre-wired Crank Handle cum Key Lock Relay box (of metal) along with accessories viz. LEDs, with approved type push buttons, terminal strips, string rod, etc. as per Drg. No. Dy.CSTE/C/Kota/6 (A) & (B). | Numbers | 2.00 | 12,049.6 | 24,099.2 |
| 47 | "Supply of William stretcher nylon insulation Set suitable for ground connection for motor point operation. Each set comprising of - (RDSO Drg. No.) T- 10367-1 no.,T-10368- 2 nos., T-10371- 4 nos. and conforming to the Specification IRS: S-23 & 40/84 with latest Amendment." | Set | 6.00 | 650.91 | 3,905.46 |
| 48 | Supply of Gauge Tie plate nylon insulation as per RDSO Drg. No. (T-10372- 1 no., T- 10368- 3 nos., T-10371- 6 nos. in each set) and to the Specification IRS: S-23 & 40 with latest Amendment as applicable. | Set | 6.00 | 297.82 | 1,786.92 |
| 49 | SUPPLY OF 20 PAIR PVC CABLE 0.5MM DIA AS PER TECH.SPECN.G/WIR-06/03MARCH 2002 OR LATEST, MAKE FINOLEX, POLYCAB, BIRLA, DELTON OR HAVELLS | Metre | 3000.00 | 75.1 | 2,25,300 |
| 50 | Supply of 2-zone amplifier as per technical spec. | Numbers | 2.00 | 24,104.16 | 48,208.32 |
| 51 | Supply of VF Tapping Transformer470:600 Ohms to RDSO Spec No.IRS.TC.22-76 or latest. | Numbers | 20.00 | 913.06 | 18,261.2 |
| 52 | Supply of fiber distribution management system for 24fiber complete (48 fibres complete along with Euro adopters, pigtail) of make BIRLA, 3M, TVS, R&M, or latest superior make as per instruction of site incharge. | Numbers | 2.00 | 18,937.74 | 37,875.48 |
| 53 | Supply of CAT-6 Shielded Cable. MAKE - D Link or similar reputed make. | Metre | 915.00 | 28.66 | 26,223.9 |
| 54 | Supply of copper Earth wire 50 Sq MM | Metre | 1500.00 | 125.16 | 1,87,740 |
| 55 | Supply of Armoured power cable as per RDSO specification No. SPN/TC/65/2019 Rev.5 or latest specification | Metre | 500.00 | 73.64 | 36,820 |
| 56 | Supply of VRLA fully charged battery 48 V DC /300 AH (stackable) as per IRS:S- 93/96 (A)(amd-1) or latest. | Numbers | 2.00 | 1,23,521.6 | 2,47,043.2 |
| 57 | "Supply of 48v 25Amp ( 3+1 ) FR/FC module Battery charger RDSO/SPN/TC/23/1999 ver4.0 amd1 or latest." | Numbers | 2.00 | 1,06,713.47 | 2,13,426.94 |
| 58 | "Supply of 4 Port LAN EXTENDER 30 MBPS Fast Ethernet ON 4W/2W configurable & it should support ac and 48V DC Power Supply as per RDSO Specification No. RDSO/SPN/TC/82/2020 Rev. 2.0 or latest. Make: MROTEK/ TEAM ENGINEERING/Cygnus or similar " | Pair | 2.00 | 23,561.56 | 47,123.12 |
| 59 | Supply of Armoured power cable as per RDSO specification No. SPN/TC/65/2019 Rev.5 or latest specification | Metre | 100.00 | 76.81 | 7,681 |
| 60 | Supply of 32 U way U-Link panel with 32 Nos U link connector of Protel make or better. | Numbers | 20.00 | 1,648.73 | 32,974.6 |
| 61 | "SUPPLY OF 2 Mb PROGRAMMABLE PRIMARY DIGITAL DROP INSERT MULTIPLEXER OPERATING ON 48 VOLT DC COMPLETE AS PER SPECIFICATION RDSO/TC- 68/2012 or LATEST.THE MUX SHOULD BE EQUIPPED WITH FOLLOWING MINIMUM CONFIGURATION: (1) 2W/4W E & M CARD FOR 16 CIRCUITS (2) SUBCRIBER LOOP CARD FOR 8 CIRCUITS (3) EXCHANGE LOOP CARD FOR 4 CIRCUITS. THE FORESAID MUX SHOULD BE COMPATIBLE WITH EXISTING INSTALLED WEBFILL MUX AND ITS SPARES" | Numbers | 1.00 | 1,44,559.7 | 1,44,559.7 |
| 62 | Supply of OFC patch cord/jumper cable of reputed make/brand, 10 m long, with(1) FC/PC connectors on both sides or (2) One end FC/PC connector and other end compatible to work with STM-4. Insp. By Consignee. | Numbers | 10.00 | 1,405.87 | 14,058.7 |
| 63 | License fees of 25 watt (1000 license fees +6000 Royalty /per year) | Numbers | 1.00 | 7,000 | 7,000 |
| Schedule total | ₹1,45,13,451.4 | ||||
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
HTML
nit.pdf
NIT
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .