REPAIR REPLACEMENT OF JOINERY PLUMBING AND SANITARY FITTINGS AND ALLIED WORKS AT SAILORS INLIVING AREA FIRST LT LOGISTIC COMPLEX MT POOL MULTI FACILITY COMPLEX CSD AND REPAIR TO ROOF LEAKAGE SEEPAGE LESS RESIDENTIAL AREA UNDER AGE B R II AT INA

Amount

Notes:- (i) The scope of work is to be carried out from ground level to nearly upto 40 metres of height. (ii) The work is to be carried out on vertical surfaces, flat RCC roof,sloped mangalore roof and sloped galvalume sheet. (iii) Quoted rates are included for Scaffolding/Boom lift/Crane as required. Contractors should arrange necessary scaffolding/ Boomlift/Crane and take all safety precautions for workers at the time of carrying out works as described in Sch 'A'/ BOQ. (iv) Contractor should visit the site before quoting the tender to assess the resources required to execute the work as the site include prestigeous buildings of INA. (v) Cost of all factors is deemed to be included in the rate quoted in BOQ. No extra claim will be entertained on this account.

Taking down chowkats with shutter (without taking off shutter from the frame) exc 1.5 Sqm but n.exc 4.00 Sqm each complete all as specified and directed.

S&F pressed steel frames of size 105 x 60 mm for doors with one or more rebates including necessary fixing lugs, hinges, etc complete all as specified and directed.

M&L for filling concrete inside frame with PCC 1:3:6, type C-0 complete all as specified and directed.

S&F 30 mm thick 1st class hard wood plain, framed, panelled shutters (any number of panels), with panels of timber flat on both sides (feather edged), or of veneered particle board medium density, wood particle board with commercial face veneers supplied and fitted to chowkats complete all as specified and directed.

Taking down chowkats with shutter (without taking off shutter from the frame) n. exc 1.5 Sqm each complete all as specified and directed.

S&F fibre glass reinforced plastic (FRP) door frame of 100mm x 60 mm thick are to be laminated with inner core of treatment and outer core of average 2 mm thick FRP with gel coat finish weighining an average of 4 kgs per mtr complete all as specified and directed.

S&F 30 mm thick factory made door shutter to be made with unsaturated polyster resin moulded to 3 mm FRP laminate for forming hollow rails and styles suitable treated and seasoned rubber wood are to be filled inside at required places for fixing of fittings, cast monolithically with 5 mm thick FRP laminate for panels with gel coat finish and with an average weight of 8 kg per sqm complete all as specified and directed.

S&F 100mm anodized aluminium barrel tower bolt of extruded section complete all as specified and directed.

S&F 150mm anodized aluminium barrel tower bolt of extruded section complete all as specified and directed.

S&F 100mm mild steel butt hinges, cold rolled medium weight complete all as specified and directed.

S&F 100mm butt hinges cast brass, with mild steel hinge pin, bright polished and fixed type B-11 complete all as specified and directed.

S&F in repairs 100mm anodized aluminium barrel tower bolt of extruded section complete all as specified and directed.

S&F in repairs 75mm mild steel butt hinges cold rolled medium weight complete all as specified and directed.

S&F in repairs 100mm extruded anodised aluminium alloy handles fabricated type complete all as specified and directed.

S&F in repairs mortice lock brass body, 100 mm, 4 levers vertical type complete all as specified and directed.

S&F in repairs 75 mm hasp and staple mild steel safety type, stove enamelled black, including bolt to hinge plate and fixed with screws complete all as specified and directed.

S&F in repair floor door stopper 150mm size aluminium alloy body and tongue double legged, anodised with hard drawn steel spring fixed to door complete all as specified and directed.

S&F in repairs aluminum (die cast) body door closer hydraulically regulated designation No 3 universal type suitable for door shutters of 851 to 1000mm in width and of weight between 61 to 80 Kg complete all as specified and directed.

S&F in repair aluminum alloy wire cloth 0.45 mm nominal dia of wire and average width of aperture 1.40mm and fixed with aluminum wire staples complete all as specified and directed.

S&F in repairs double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed complete all as specified and directed.

S&F in repairs 75mm long anodised aluminium handle cum lock for sliding window/ventilator shutter complete all as specified and directed.

S&F in repairs mild steel friction hinges suitable for window/ ventilator shutters complete all as specified and directed.

Taking down aluminium shutters exc 1.00 sqm and n exc 2sqm each (without taking out frame) and refixing in the same positon after carrying out repairs and provision of aluminum tie rod at top and bottom rails complete all as specified and directed.

Taking down and refixing of shutters of any description exc 1.00 Sqm and n.exc 2.00 Sqm in same opening after easing and adjusting complete all as specified and directed.

Resecuring or easing and adjusting without taking down shutters of any description exc 1 sqm and n exc 2 sqm each complete all as specified and directed.

M&L for aluminium powder coated windows and ventilator shutters etc. side hung type without sash bars,aluminium section weighing not less than 0.55 Kg/m including necessary joining cleats, glazing clips rubber neoprene packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 No), hinges type B-21 100mm long (2 Nos) suitable handle (1 No) etc (minimum thickness of powder coating not less than 50 micron) complete all as specified and directed.

S&F aluminium powder coated door shutter, side hung type aluminium section weighing not less than 0.55 Kg/m including necessary joining cleats, glazing clips, rubber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminium snap beading, screws etc. (minimum thickness of powder coating not less than 50 micron) complete all as specified and directed.

S&F aluminium powder coated frame for partitions, doors, windows, ventilators with one or more rebates including joining cleats for fixing etc.(minimum thickness of powder coating not less than 50 micron) complete all as specified and directed.

Dismantling wall and ceiling boards (fiber, pulp, insulation etc.) or insulation boards/ slabs/ any thickness including cover fillets complete all as specified and directed.

M&L for providing polyester foil coated aluminium alloy (metal planks) for false ceiling in repair as per manufacturers instructions complete all as specified and directed.

All as per item ser No 31 above but fixing only complete all as specified and directed.

S&F in repair anodised aluminium snap grid frame work for false ceiling, the snap grid frame work shall be fixed to ceiling with supporting hanger consisting of 6mm da mild steel rod, J bolts with necessary bolts, nuts and washers.The snap grid (main/cross tee section) supported at ends shall be 40mm x 25mm x 2mm weighing 0.36 Kg/RM and the main & cross tee shall be jointed at junction/ crossing with angle bracket of size 15mm x 15mm x 1.5mm, weighing 0.12 Kg/RM complete all as specified and directed.

M&L for 4mm thick non-asbestos fiber cement building boards fixed or laid/ inserted to timber, GI/aluminium framework with screws complete all as specified and directed.

M&L for seamless calcium silicate ceiling 12mm ,made out of 1800 x 1200 mm size board of siliceous and calacareous material reinforced with cellulose fibre fixed to the ceiling section with 25mm long self drilling and tapping screws having philips head with under head cutter at 200 mm centre to centre , including finishing the joint of face board with specially formulated jointing compound and 48 mm wide fibre tape provide seam less finish fibre tape to provide seam less finish ( frame work for ceiling shall be measured and paid seperately) complete all as specified and directed.

M&L for Gl frame work for seamless ceiling comprising of Gl perimeter channnel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre complete all as specified and directed.

M&L for hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long complete all as specified and directed.

Dismantling cabinets boarding, any description, fixed in any position with screws complete all as specified and directed.

S&F in repair 18/20 mm thick multiwood board as in cupboard fixed with screws to wall of required size and shape complete all as specified and directed.

S&F stainless steel soft closing hydraulic hinges for shutter complete all as specified and as directed.

M&L for hacking out old broken glass ( any thickness, size, quality or description) from metal frame including punching or drilling out old glazing pins/ spring clips and providing and fixing new ones complete all as specified and directed.

M&L for 4mm thick sheet glass plain ordinary quality not exc 0.50 sqm in each pane and glazing with beading complete all as specified and directed. Note:- Aluminium beading shall be measured and paid separately.

M&L for 5.5mm thick sheet glass plain ordinary quality exc 0.50 sqm in each pane and glazing with oil putty complete all as specified and directed.

S&F in repair vitreous China wash basin,coloured (flat back) 550x400mm excluding pillar tap, but including fixing brackets, cutting for and pinning in ends of brackets complete all as specified and directed.

S&F in repairs pillar taps 15 mm size, cast copper alloy, chromium plated screwed down high pressure screwed for iron pipe & fixed complete all as specified and directed.

S&F in repair vitreous china, wash down water closet (EWC) with seat cover coloured, closed pattern with flat bottom and cover with mild steel (CP) or aluminium hinging device fixed with necessary bolts complete all as specified and directed.

S&F in repair vitreous china, wash down water closet (pedestal pattern), cascade type including flushing cistern with seat cover coloured, closed pattern with flat bottom and cover with chromium plated mild steel or aluminium hinging device fixed with necessary bolts complete all as specified and directed.

S&F in repair vitreous China Urinal, half stall type, coloured, with and including all fixing acessories complete all as specified and directed.

S&F in repair vitreous China Urinal partition, coloured, with and including all fixing acessories complete all as specified and directed.

S&F plastic seat cover (colour) closed pattern with flat bottom suitable for EWC including taking down old cover complete all as specified and directed.

S&F in repair 10 ltrs capacity PVC valveless syphonic action type flushing cistern low level with inlet ball valve, float and handle including brackets complete all as specified and directed.

S&F in repairs 15mm bore chromium plated bib taps (fancy type), cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipes complete all as specified and directed.

S&F in repair angular stop valve, cast copper alloy, screwed down, high pressure with crutch or butterfly handle, chromium plated, fancy type, screwed both ends for iron pipe or for union and fixed, suitable for 15 mm bore pipe complete all as specified and directed.

S&F in repair brass chromium plated towel ring complete all as specified and directed.

S&F in repair 20mm dia,D type, 60cm long cast copper alloy, chromium plated towel rail complete all as specified and directed.

S&F in repair cast copper alloy, chromium plated toilet paper holder complete all as specified and directed.

S&F in repair chromium plated soap tray fixed with CP brass screws complete all as specified and directed.

S&F in repair health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect as specified and directed.

S&F in repair cast copper alloy, chromium plated waste coupling with long shank, half thread, 32 mm dia, for WHB etc. complete all as specified and directed.

S&F 15/ 20 mm outer dia CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified and directed.

Taking up or down steel tubing and connections 15mm dia complete all as specified and directed.

Taking up or down steel tubing and connections 20mm dia complete all as specified and directed.

S&F in repairs 32mm dia PVC flexible waste pipe for urinals/WHB/ sink complete all as specified and directed.

S&F in repair PVC connections 15mm size with PTMT nuts of length 450mm complete all as specified and directed.

S&F in repair PVC (SWR) pipes of 75mm dia single socketed in any length with rubber ring joints fixed to walls complete all as specified and directed.

S&F in repair PVC (SWR) pipes of 110mm dia single socketed in any length with rubber ring joints fixed to walls complete all as specified and directed.

S&F in repair 75mm PVC (SWR) floor trap plain with grating including jointing with solvent cement complete all as specified and directed.

Demolition of brick work, PCC block or stone masonry built in cement mortar complete all as specified and directed.

M&L for precast cement concrete block masonry with solid blocks type B1, 1:3:6 (20mm graded aggregate) exc 10 cm in width and set in cement mortar 1:6 complete all as specified and directed.

All as per item No.70 above but except PCC blocks complete all as specified and directed.

S&F urinal spreader of brass chromium plated and flush cock (lever type) 25mm of Cat Part No. KBEA -32 of Prayag or equivalent complete all as specified and directed.

S&F in repairs flush kit of low level flushing cistern of cascade type WC complete all as specified and directed.

S&F solar control film 50 micron thick reflective type sticked to glass panes as per instructions of manufacturers at a height approx 20m including errection of necessary scaffolding complete all as specified and directed.

Dismantling plain or corrugated steel sheeting / galvalume sheets, any gauge, thickness as in roof covering complete all as specified and directed.

S&F pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet tile pattern 0.50mm thick of approved colour& pattern having tensile strength of 550 Mpa as in roof covering / cladding to wall, fixed with self tapping screws complete all as specified and directed.

S&F pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.

Taking down of cement plaster of any description or thickness/chipping of cement concrete in any situation from brick or concrete surface including raking out of joints, hacking for key scrubbing down with water to received new plaster complete all as specified and directed.

M&L for rendering 15mm thick on fair faces of brick work or concrete surfaces in CM 1:4 finished even & smooth without using extra cement mixed with liquid water proofing compound (Work in foul condition and in shaft) complete all as specified and directed. Note:- Liquid water proofing compound shall be measured & paid separately.

M&L for rendering on fair faces of brick work or concrete surfaces 10mm thick in CM 1:4 finished even and smooth without using extra cement complete all as specified and directed.

M&L for rendering on fair faces of brick work or concrete surfaces 10 mm thick in CM 1:3 in celing finished even and smooth without using extra cement using water proofing compound complete all as specified and directed.

M&L for preperation of new plastered surface and applying two coats of acrylic emulsion paint (interior grade) on wall over a coat of acrylic primer all as specified and as per manufacturer's instructions.

Supply only liquid water proofing compound of approved quality complete all as specified and directed.

M&L for preparation of new plastered surfaces and applying two coats of santex matt over a coat of primer on wall all as specified and as per manufacturers instructions and directed by Engineer-in-Charge.

M&L for preparation of new plastered surfaces and applying three coats of white wash on ceiling complete all as specified and directed.

S&F in repair aluminium composite panel 4mm thick of any colour and shade of Alu Bond or equivalent fixed with self tapping screws on aluminium frame work of section 40 x 40mmm in any shape and size complete all as specified and directed by Engineer-in-Charge.

Dismantling rolling shutters of area not exceeding 20 Sqm fixed to wall and refixing the same after carrying out the following repairs/ rectification including necessary scaffolding :- (a) Supply and fixed in repair of safety lever locks mild steel with levers for rolling shutters complete all as specified. (b) Supply and fix in repair of MS spring for rolling shutters complete all as speciifed (c) M&L for cleaning of rolling shutters and applying grease on steel surfaces in side channels for smooth functioning of all steel members complete all as specified (d) Supply and fix in repair of MS tie rod as required. (e) Supply and fix in repair interlocking lath section. (f) S&F ball bearing on either side. (g) S&F MS push plate.

Dismantling single layer of mangalore pattern tiles in roofing complete all as specified and directed.

M&L for roof tiles mangalore pattern interlocking at side joints, laid dry complete all as specified and directed.

All as per item No 89 above but except tiles complete all as specified and directed.

M&L for ridge or hip tiles to suit mangalore pattern or roofing tiles bedded and jointed in cement mortar 1:6 using water proofing compound complete all as specified and directed.

M&L for preparation of new MP roof tile surfaces by cleaning the tiles and applying two coats of antifungal paint using UNIGLOSS deluxe multi surface paint over a coat of primer complete all as specified and directed by Engineer-in-Charge.

M&L for preparation of old MP roof tile surfaces by cleaning the tiles and applying one coats of antifungal paint using UNIGLOSS deluxe multi surface paint complete all as specified and directed by Engineer-in-Charge.

S&F anodised aluminium frame for below MP tiles in repair with one or more rebates including joining cleat for fixing etc. complete all as specified and directed.

S&F transparent polycarbonate roofing sheet 5 mm thick fixed to steel frame work using self tapping screws etc complete all as specified and as directed.

Dismantling of structural steel work/aluminium work including doors etc complete all as specified and directed.

S&F steel work in tubular trusses (tubular, angle, square and rectangular etc ) including shaped washer etc. complete using ERW or induction butt welded tubes. conforming to IS 1161-1998 grade St-240 for round tubes complete all as specified and directed.

Erection and fixing only steel work in tubular trusses (tubular, angle, square and rectangular etc ) including shaped washer etc. complete using ERW or induction butt welded tubes. conforming to IS 1161-1998 grade St-240 for round tubes complete all as specified and directed.

M&L for preparation of new steel surfaces of any description over 10 cm in width or girth and applying two coats of synthetic enamel paint over one coat of red oxide primer complete all as specified and directed.

M&L for preparation of old painted surfaces exc 10cm width or girth and applying one coat of synthetic enamel paint on steel/iron surfaces complete all as specified and directed.

M&L for laying and pasting of bituminous strip of width 10 cm of Make : 3M, BASF, Dr.Fixit, Forsroc or equivalent on joints of galvalume sheet & RCC surfaces including cleaning of existing surfaces complete all as specified and directed.

Taking down existing water proofing treatment of any description and removing rubbish off the premises complete all as specified and directed.

M&L for cutting out cracks to V-section in existing roofs or terracing, cleaning out, wetting, grouting with cement and sand slurry 1:3 using water proofing compound complete all as specified and directed.

M&L for cement concrete 1:2:4 type B1 (20mm graded stone aggregate) as in roof kerb, rounded or chamfered on edges complete all as specified and directed.

M&L for cement concrete 1:2:4, type B1 (20mm graded stone aggregate) as in filling and mass concrete, roof slab padding preparatory to roof treatment, complete all as specified and directed.

M&L for 10mm thick rendering in CM 1:3 on roof with liquid water proofing compound, surfaces finished even and smooth without using extra cement complete all as specified and directed. Note:- Liquid water proofing compound shall be measured and paid separately.

M&L for applying evenly a tack coat of industrial bitumen 85/25 at the rate of 1.2 Kg per Sqm including cleaning surface for laying APP based polymeric membrane minimum weighing 4kg/sqm and minimum 4mm thick reinforced with polyester non woven fabric (wt not less than 160 gms/sqm) by forced application complete all as specified and directed.

Dismantling of existing sadaralli stone including nut and bolts of any thickness on vertical cladding complete all as specified and directed.

S&F 20 to 25 mm flame finished sadarahally machine cut stone cladding laid dry fixed with stainless steel clamp and anchor fasteners and headless bolts on vertical surface of wall and column by the following method:- a) Make suitable depression (approx. 5mm width and 25 mm depth on vertical face of stone fix the clamp) b) Make suitable drill hole to the surface of stone and wall/column to fix anchor fasteners. c) Make good the surface of drilled portion (where headless bolts are inserted) using universal surface filler(supertak or equivalent) d) Quoted rates are deemed to be inclusive of necessary Scaffolding/Boom lift/Crane as required. Contractors should arrange necessary scaffolding/ Boomlift/Crane and takes all safety precautions for workers at the time of carrying out works as described. Note: Supply only Hilti make anchor fasteners and clamps and headless bolts shall be measured and paid separately.

All as per item no 109 above but except Sadarahally stone complete all as specified and directed.

Supply only hilti make stainless steel anchor fastner- 10 x 80mm, stainless steel anchor fastner- 10 x 150 mm and stainless steel clamp 5 x 50 mm for fixing of sadrahally stone cladding complete all as specified and directed.

M&L for sealing all the joints in sadarahally stone with PU sealent of Make : Forsroc, McCoy Soudal or equivalent including cleaning of existing surfaces complete all as specified and as directed. Note: The applicator will be from approved manufactures by GE.

M&L for sealing of screw holes in roofing sheets with PU sealent of Make : Forsroc, McCoy Soudal or equivalent including cleaning of existing surfaces complete all as specified and as directed.

Repairs to expansion joint with following specifications:- (a) Demolition and removal of masonry (stone / brick) over the expansion joints and necessary chipping with machine, electrical chipper tools and removing debris from site, location as directed by Engineer-in-Charge. (b) Open expansion joint by chipping loose portions, surface and straightening the edges of the expansion joint using FOSROC Renderoc-S2 or equivalent make of Pidilite, SIKA, STC, two part structural grade reinstatement mortar or equivalent including preparation of surface complete all as per manufacturer's instructions. (c) After strengthening the edges of expansion joint, expansion joint shall be filled with Hydrocel XL or equivalent make of Pidilite, SIKA, STC, @155 mm thick material, and then polythelene backer rod 30mm dia is to be fixed in expansion joint and the balance gap to be filled with concrete of size 40mm X 20mm with FOSROC Thioflex 600 two part polysulphide sealant or equivalent material. (d) Providing and fixing Expoband a hypalon membrane system which is designed to be bonded over movement joints in structures to prevent the passage of water. The Hypalon membrane is bonded in position using Nitobond PC 40, two part epoxy adhesive or equivalent make of Pidilite, SIKA, STC, complete all as per manufacturer's instructions. (e) Providing and applying bituminous water based primer on the prepared surface and when the surface is tacky self adhesive SBS membranes by using FOSROC Proofex GP or equivalent make of Pidilite, SIKA, STC are installed and firmly pasted it on the existing membrane joints laid in dry condition with approximate 80mm overlap of edges complete. (f) The applicator will be from approved manufactures by GE.

M&L for sealent filling to window/door frame,t he work shall include the following: (a) Cleaning existng treatment like cement mortar and sealent filled between window / door frame and the masonery walls to be completely removed and all the loose adhered particles shall cleaned using air blowers and allowed it to dry. (b) The sealent filling shall be flexible with one part low modulus gun grade elastomeric Polyurethane sealent Nitroseal PU 40 of Fosroc of BASF or Sika of pidilite or approved equivalent to the joints size max of 10 mm width X 10 mm depth. The cured sealent shall have the prperties of MAF 25%, UV Resistance, and service temperature range -40 Degree Centigarde to 70 Degree Centigrade, Nitoseal PU 40 confirms to the standatad compliance of ISO11600:2002 Type F 25 LM, ASTMC920-95 Type S,Grade NS,Class 25.The rate quoted shall include all material, surface preparation, tools scaffoldings safety equipments laboures etc complete as per manufacturers specification. (c) The applicator will be from approved manufactures by GE.

M&L for water proofing treatment to existing brick masonry with grouting,the rate shall include the follwoing:- (a) Removal of the plastering completly to expose the brick masonry.Surface shall be thoroughly washed with water and allowed to dry before starting the grouting works. (b) Injection grouting : The grouting area should be identified above skirting level drilling 12 mm dia and fixing of GI packers suing instant setting cement of epoxy mortar like Nitomortar S of Fosroc or BASF or Sika or Pidilte or approved equivalent injection of silicon based / polyurathene based grouting material like Nitrofill WS 60 & UR 63 of Fosrocor BASF or Sika or pidilite or approved equivalent with a suitable hand pump carrying pressure of 3 kg / cm2 . Grouting operation should be continous till there is refusal of material or material observed at adjacent holes. (c) Providing and laying cement plaster of cement mortar 1:4 admixed with integral waterproofing compound like Conplast WL of Fosroc or BASF or Sika or Pidilite approved equivalent to minimum thickness of 15 mm and application of emulsion paint of approved shade as per the direction of Engineer in charge Providing and applying with two coats of water dispersed Polyurethane coating like Nitocote PUW 100 of Fosroc or BASF or Sika or Pidilite or approved equipment at a dry film thickness of 100 microns of approved shade using brush or roller or spray over the prepared plastered surface as per Manufatureres instruction. (d) The applicator will be from approved manufactures by GE.

Extra over rendering or plastering for work in isolated widths not forming part of general plastering such as in bands, sunk panels, cornices, skirtings, drip moulds and similar work n exc 15cm in width or girth including cutting to edges, all mitres and stopped ends etc complete all as specified and as directed.

S&F in repair PVC rain water gutter pipe 150 mm dia including fittings and fixing arrangement to wall complete all as specified and as directed.

Dismantling the existing water tank and S&F Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I of capacity 500 litres complete all as specified and as directed.

Dismantling the existing water tank and S&F Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I of capacity 1000 litres complete all as specified and as directed.

Dismantling the existing water tank and S&F Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I of capacity 2000 litres complete all as specified and as directed.

S&F Stainless steel letters made out of 2mm thick SS sheet of grade 304 with height of each letter not exc 300mm and fixed on ACP panel/wall surface using adhesives or by any method complete all as specified and as directed.

KDR CONSTRUCTION

SANDR

K P DIVAKARAN

RS ENTERPRISES