TAMLI GOV PUMPING WATER SUPPLY SCHEME

Amount

Earth work in excavation by mechanical means (Hydraulic excavator)/ manual means over areas (exceeding 30cm in depth. 1.5m in width as well as 10 sqm on plan) including disposal of excavated earth, lead upto 50m and lift upto 1.5m, disposed earth to be levelled and neatly dressed.Excavation in all kinds of soil for foundation and other side develpoment work

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:4:8 (1 Cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size).

Providing and laying in position cement concrete of specified grade including the cost of centering and shuttering - All work up to plinth level : 1:2:4 (1 Cement : 2 coarse sand : 4 graded stone aggregate 40 mm nominal size). including supply of all material,labour,T&P etc.required for proper completion of work.

Brick work with F.P.S. bricks of class designation 75 in superstructure above plinth level upto floor V level in all shapes and sizes in Cement mortar 1:6 (1 cement : 6 coarse sand)

Providing and laying in position specified grade of reinforced cement concrete excluding the cost of centring, shuttering, finishing and reinforcement - All work upto plinth level 1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded stone

Reinforcement for R.C.C. Work Using Thermo-Mechanically Treated Bars

Centering, shuttering including struttings, propping etc. and removal of form work for Columns, piers, abutments, pillars, posts, struts and slab.

Providing and fixing factory made ISI marked steel glazed doors, windows and ventilators, side /top /centre hung, with beading and all members such as F7D, F4B, K11 B and K12 B etc. complete of standard rolled steel sections, joints mitred and flash butt welded and sash bars tenoned and riveted, including providing and fixing of hinges, pivots, including priming coat of approved steel primer, but excluding the cost of other fittings, complete all as per approved design, (sectional weight of only steel members shall be measured for payment). Fixing with 15x3 mm lugs 10 cm long embedded in cement concrete block 15x10x10 cm of C.C. 1:3:6 (1 Cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size)

12mm cement Plaster

1:4(1cement :4 sand )

1:6(1cement :6 sand )

Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade New work (two or more coats) over and including priming coat with cement primer

Finishing walls with textured exterior paint of required shade New work (Two or more coats applied @ 3.28 ltr/10 sqm) over and including base coat of water proofing cement paint applied @ 2.20kg/10 sqm.

Steel work welded in built up section/framed work including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using steel etc. as In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works.

Paining or varnishing on new iron or new wood work with one primer coat and two coats approved enamel paints and varnish complete

Excavation of pipeline trench in following strata, lift upto 1.5m, lead upto 30m. Including refilling, watering, ramming of excavated earth into the trenches and removal of surplus earth upto a distance of 60m from trenches including supply of labour, T&P etc complete. Soil mixed with Boulder

Supply and Carting, of following sizes of MSERW YST210 grade plain ended pipes from store to site of work, lowering them into trenches, laying true to alignment & gradient, laying & Jointing of Pipe by electric welding, making horizontal & vertical bends of any degree as per site conditions including cutting of pipes for making up lengths as required for completion of works & also including cost of welding materials (Advani make welding rods), all other materials,labours & T&P etc. required for proper completion of work. 65mm (4mm thick)

Finishing with Food grade Epoxy paint (two or more coats) at all locations prepared and applied as per manufacturer’ specifications i/c appropriate priming coat, preparation of surface, etc. complete. On steel work

Supply and Carting , laying jointing (including cost of jointing materials like specials and fittings, white lead, hemp and oil etc.) fixing and testing of M.S. galvanised screwed and socketed pipes (Medium quality).including cutting and threading etc. complete confirming to IS:1239 (Part-I) make of pipe:Jindal (Hisar)/Parkash Surya/ TT Swasthik

GI Pipe 32 mm dia (Medium Qualty)

GI Pipe 40 mm dia (Medium Qualty)

GI Pipe 50 mm dia (Medium Qualty)

GI Pipe 65 mm dia (Medium Qualty)

Providing and fixing gun metaled Gate valves as per IS: 778/1997

32 mm dia

40 mm dia

50 mm dia

65 mm dia

Providing and fixing C.I. Sluce valves non rising(PN 1.6) 65mm

Providing and fixing C.I. reflex valves non rising(PN 1.6) 65mm

Supply of all materials, labours, T&P. etc. to construct wheel valve chamber of internal size 0.60x0.60x0.60 mtr of stone masonary, 15mm thick cement plaster with cm 1:4 and with M.S. Cover with locking arrangement as per type design complete.

Supply of all materials, labours, T&P. etc. to construct wheel valve chamber of internal size 0.45x0.45x0.45 mtr of stone masonary, 15mm thick cement plaster with cm 1:4 and with M.S. Cover with locking arrangement as per type design complete.

Supply of all materials, labour T&Petc Construction of R.C.C CWR of following capacities (In kiloliters) with M.S Ladder out side the tank and alluminium ladder inside of the tank M.S M.H cover with locking arrangement , lighting conductor as per electricity rules, water lavel indicator, supply & fixing of out let, in let , over flow and wash out pipes with necessary sluice vales, pipe pieces (Including cost of materials) flooring 0.60 m wide apron , painting on tank body verticl pipes, ladder, M.S M.H cover, ventilator column etc. complete with approved water proosing ( apex/Enamal paint, testing filling water for testing purpose etc. including supply of vertical pipes and special assuming bearing capacity as 10 MT/M2

Random rubble masonry with hard stone in foundation and plinth including levelling up with cement concrete 1:6:12 (1 cement: 6 coarse sand : 12 graded stone aggregate 20mm nominal size) at plinth level with Cement mortar 1:6 (1 cement : 6 coarse sand) including supply of all material,labour,T&P etc.required for proper completion of work.

Construction of RR dry stone massonry including supply of all material, labour, T&P etc.required for proper completion of the work.

Providing and fixing water clost squatting pan (Indian type W.C. pan) with 100 mm sand cast Iron or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS:7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required: White Vitreous China Orissa pattern W.C. pan of size 580x440 mm with integral type foot ressts.

Wiring for light point/fan point/exhaust fan point/call bell point with 1.5 sqmm. FR PVC insulated copper conductor single core cable in surface/recessed PVC conduit, with piano type switch, phenolic, laminated sheet, suitable size MS Box and earthing the point with 1.5 sq.mm FR PVC insulated copper conductor single core cable etc as required. Group B