Supply, erection/installation, testing and commissioning of fabrication machines at Pallom, Kottayam.

Part I Supply

Supply of Mechanical Power Press of 150 MT capacity, non-inclinable with C-type frame, steel fabricated body, with pneumatic clutch, foundation pads, provided with hole and T-slot in ram T slot in table suitable for fixing tool assembly for different purposes, automatic lubrication system and knock out system driven with 15 HP electric motor (ISI marked approved make) with standard control arrangements, V belt etc. complete with 1 set each of angle iron, channel and flat sections, tooling capable of handling up to 8mm thick MS sections as detailed below for cutting, bending and punching holes etc; complete as per technical specifications. (The rate offerred shall be inclusive of the rate of tool assemblies as follows and all duties, packing, forwarding, transit, insurance, freight etc; complete excluding GST) (a) Angle Iron cut Tooling Assembly for cutting MS Angles of Size up to 90 x 90 x 8 mm (b) Round Stock Tooling Assembly (Piercing Tool) for punching Holes of Dia 32 mm, 24 mm, 22 mm, 21 mm, 18 mm, 14 mm and 12 mm in MS Items upto 8mm thick

Supply of Mechanical Geared Power Press of 75 MT capacity, non-inclinable with C-type frame and with steel fabricated body, with pneumatic clutch including foundation pads, hole and Tslot in ram & table suitable for fixing tool assembly for different purposes, automatic lubrication system and knock out system driven with 7.50 HP electric motor (ISI Standard make with mark) with control panel V-belt drive etc. complete at site as per technical specifications with the following tool assembly. (The rate offered shall be inclusive of the rate of tool assemblies as follows and all duties, packing forwarding, transit insurance, freight, charges etc. complete excluding GST). (a) Tool assembly for punching holes on M.S. Angles/ Flats of various thickness from 6mm to 8mm for holes of dia 6mm, 18mm, 20mm, 22mm, 25mm. (with four extra die set & 4 nos. extra punches of each dia.)

Supply of Mechanical Geared Power Press of 75 MT capacity, non-inclinable with C-type frame and with steel fabricated body, with mechanical clutch including foundation pads, hole and Tslot in ram & table suitable for fixing tool assembly for different purposes, automatic lubrication system and knock out system driven with 7.50 HP electric motor (ISI Standard make with mark) with control panel V-belt drive etc. complete at site as per technical specifications with the following tool assembly. (The rate offered shall be inclusive of the rate of tool assemblies as follows and all duties, packing forwarding, transit insurance, freight, charges etc. complete excluding GST). (a) Tool assembly for punching holes on MS Angles/Flats of various thickness from 6mm to 8mm for holes of dia 6mm, 18mm, 20mm, 22mm, 25mm (with four extra die set & 4 Nos. extra punches of each dia.)

Supply of Air compressor (Reciprocating type) capable of continuously supplying compressed air to the machines powered by a 3 phase A.C. electric motor of 10 HP with starter (ISI approved make) and with air receiver tank (conforming to ASME norms) with non return valve, safety valve, pressure gauge, automatic pressure control mechanism and having 420 litres capacity with all other accessories etc. complete as per technical specifications. The rate offered shall be inclusive of all duties, packing forwarding, transit insurance, freight, charges etc. complete excluding GST.

Supply of Electric furnace 1200 degree celcius 12KW rating, muffle size 300x300x200 mm, suitable for heat treatment process and conforming to the relevant standard specification with all other accessories etc. complete as per technical specifications. The rate offered shall be inclusive of all duties, packing forwarding, transit insurance, freight, charges etc. complete excluding GST.

Part II Installation, testing & commissioning.

Civil, Electrical and Erection works including testing and commissioning of Mechanical Power Press of 150 MT Capacity with pneumatic clutch.

Civil, Electrical and Erection works including testing and commissioning of Mechanical Geared Power Press of 75 MT Capacity with pneumatic clutch.

Civil, Electrical and Erection works including testing and commissioning of Mechanical Geared Power Press of 75 MT Capacity with mechanical clutch.

Civil, Electrical and Erection works including testing and commissioning of 10Hp Air compressor (Reciprocating type)

Civil, Electrical and Erection works including testing and commissioning of Electric furnace 1200 degree celcius 12KW rating ,muffle size 300x300x200 mm.

PROMPT MACHINETOOLS CO.

BEST ENGINEERING CO