Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹8.7 LAccepted-AOC 00 HAIDARPUR JAMALPUR ROAD SADAR JAUNPUR UTTAR PRADESH 222001 | JAUNPUR | UTTAR PRADESH | 222001 | ₹8.7 L Quoted ₹9.2 L | L1 | Accepted-AOC Lowest bid value |
| 2 | L2₹9.5 L+₹30,177 (3.27%)Rejected-Finance | ₹9.5 L+₹30,177 (3.27%) | L2 | Rejected-Finance Higher bid value |
| 3 | L3₹10.0 L+₹78,191 (8.49%)Rejected-Finance 29 KESHULI AKOUR MADHUBANI MADHUBANI BIHAR 847230 UDYAM BR 20 0037592 | MADHUBANI | BIHAR | 847230 | ₹10.0 L+₹78,191 (8.49%) | L3 | Rejected-Finance Higher bid value |
Tender Value
Refer Docs
EMD Value
₹16,000
Closing Date
19 Oct 2021, 6:00 pmClosed
GE AF PURNEA
GE AF PURNEA, P.O - CHUNAPUR AIR FIELD, DIST- PURNEA BIHAR, PIN CODE 854303
REPAIRS TO ROOF SHEET AND FALSE CEILING AT MOUZA DALAN AT MIL STN KATIHAR UNDER GE (AF) PURNEA
2021_MES_444198_3
C/8904/E8
Open Tender
Civil Works
Item Rate
180 days
GE AF PURNEA
Please refer Tender documents.
8 documents required · 8 mandatory
₹500
GE AF PURNEA
₹16,000
Yes
28 Oct 2021
5 Oct 2021
20 Oct 2021
5 Oct 2021
19 Oct 2021
6 Oct 2021
Amount
Dismantling of plain or corrugated sheets of any gauge, thickness for roof covering, complete all as specified and as directed.
S&F of Pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws, complete all as specified and as directed by Engineer-in-charge.
S&F of Pre-painted galvalume aluminum zinc coating GI based plane steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws, complete all as specified and as directed by Engineer-in-charge.
Dismantling wrought iron or mild steel works of any description not otherwise provided for, complete all as specified and as directed.
S&F roof truss(framed), trussed, purlins crane gantries, rails and fastemings and heavy bracket framing (Beam, tee, angle, chanel or flat sections) encluding distance pieces, cleats etc conforming to Fe-410-W (Gde-E-250) complete all as specified and as directed by Engineer-in-charge.
S&F framed work such as in gates of angle or pipes with gusset plates, rails, braces etc to be prepared for hanging or sliding with and including either hooks, pintle hinges, fittings complete etc. conforming to Fe-410 (Grade E-250) complete all as specified and as directed by Engineer-in-charge.
S&F mild steel articles such as pintle hinges:large hasps and staples;chains;hand made sliding bolts; clamps;hold fasts; complete all as specified and as directed.
Demolition of reinforced cement concrete specifically provided for colomn for Gate etc complete all as specified and as directed.
M&L for Cement concrtete type B-1, 1:2:4 (using 20mm graded stone aggregate) as in Columns, pillars, piers,posts and struts etc complete all as specified and as directed.
M&L for rendering 10mm thick on brick masonary surfaces in CM 1:4, finished even and smooth (without using extra cement), complete all as specified and as directed.
M&L for two coats of synthetic enamel paint over a coat of red oxide primer including preparation of new steel surfaces of any description exc 10cm in width or girth, complete all as specified and as directed.
M&L for applying two coats of cement paint over a coat of primer including preparation newly plastered surfaces of wall, complete all as specified and as directed.
Use and waste of formwork to sides of pillars, posts, struts, piers, columns etc rough finished surface square, rectangular on plan or polygonal complete all as specified and as directed.
M&L for Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia, complete all as specified and as directed.
M&L for Mild steel TMT bars 8mm dia in stirrups, binders, spacers etc, cut to length, bent to shape required, including cranking, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia, complete all as specified and as directed. Note:-The contract sum shall be arrieved at after deducting amount of schedule of credit from the total quoted amount.
RAJEEV KUMAR
A K C PROJECT
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .