Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹28.6 LAccepted-AOC 66 6 410 1 MULAGANDA HOUSING COLONY GAJUWAKA DEPOT VISAKHAPATNAM 530026 | VISAKHAPATANAM | ANDHRA PRADESH | 530026 | L1 | Accepted-AOC LOWEST TENDER | |
| 2 | L2₹30.6 L+₹71,785 (2.40%)Rejected-Finance D NO 44 38 12 23 4 AVS PARADISE SRINIVASA NAGAR AKKAYYAPALEM POST VISAKHAPATNAM 530 016 | VISAKHAPATANAM | ANDHRA PRADESH | 530016 | L2 | Rejected-Finance NOT LOWEST | |
| 3 | L3₹31.6 L+₹1.7 L (5.63%)Rejected-Finance DOOR NO 38 I H COLONY MALKAPURAM POST VISAKHAPATNAM 530 011 | VISAKHAPATANAM | ANDHRA PRADESH | 530011 | L3 | Rejected-Finance NOT LOWEST | |
| 4 | L4₹32.7 L+₹2.8 L (9.34%)Rejected-Finance | L4 | Rejected-Finance NOT LOWEST | |
| 5 | L5₹32.9 L+₹3.0 L (10.1%)Rejected-Finance DOOR NO 10 89 BC COLONY PAPAYYARAJUPALEM SUJATHANAGAR VISAKHAPATNAM 530 051 | VISAKHAPATANAM | ANDHRA PRADESH | 530051 | L5 | Rejected-Finance NOT LOWEST |
Tender Value
₹40 L
EMD Value
₹80,000
Closing Date
13 Oct 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Garrison Engineer Utility-II
Garrison Engineer Utility-II 104 Area Industrial Estate Post Visakhapatnam -530 007
REPAIR MAINT TO FRESH WATER TREATMENT EQUIP CLEANING OF UG SUMPS OH TANKS UPKEEPING WS INST ATTEN EMERGENCY BREAKDOWN TO WS DIST NETWORK OTHER ALLIEDWORK AT NAD INS DEGA DEGA VIHAR ABE PARK UNDER AGE E M NO II OF GE U II VISAKHAPATNAM
2022_MES_549282_1
8853
Open Tender
Electrical and Maintenance Works
Item Rate
180 days
Garrison Engineer Utility-II Visakhapatnam
Class D
8 documents required · 8 mandatory
₹500
Garrison Engineer Utility-II
₹80,000
Yes
16 Nov 2022
15 Sept 2022
14 Oct 2022
15 Sept 2022
13 Oct 2022
1 Oct 2022
Amount
Material and labour for maintaining of potable / fresh water to achieve chlorination level by keeping concentrated efforts as per standard water quality specifications of maintaining PPM, by checking time to time with standard testing equipments / lab test items if any daily before pumping of water to users from sump / OHTs to building OH tanks through raising mains etc. by adding chlorination granuals as required for disinfection of water as per standard at site as under :- (a) ppm at sump level to pumping water to building OH tank - 2 ppm, (b) Ensuring water is to be free from E.coli and thermotolerant coliform bacteria and it shall not be detectable in any 100ml of sample water.
Notes :- The item rate is inclusive of following :- (a) Contractor or his rep has to attend daily at all pump houses once in a day to check all the water parameters and sign in the register being maintained with pump house staff. (b) Register should be maintained and daily record of the same should be endorsed from users / MES rep at pump house, concerned Engineer-in-Charge as well as concerned medical team of respective unit daily. (c) Water testing shall be carried out as per NABL norms from NABL / NABL Accredited Laboratories and the same has be submitted to subdivn office once in a month or whenever required or directed by the users and department depend upon the situation / quality of water.
(d) Required quantity of chlorine granuals / bleaching powder required to be used at pump houses regularly and superchlorination to be done and the same shall be measured and paid seperately under relevant items of schedule. The amount / quantity of mixing chemicals, gas etc., would be vary as per the quality of receiving water from time to time to bring the required ppm once checked before pumping the water from sump to OHT of user building. The necessary mixing up of granuals / bleaching powder for maintaining standard water and for superchlorination the existing staff / manpower at pump houses shall be utilized if necessary. The above specified job shall be carried out at each pump house as under :- (a) INS Dega P-5 pump house (b) Dega Vihar pump house (c) NAD Colony pump house (d) DSC pump house (e) Viswakarma pump house (f) TRS-II pump house (g) ABE Park pump house - Total - 07 Nos.
M & L for seven stage cleaning and sterilization of inside UG sump reservior through bacteriological treatment by using TERBAC GS, TERBAC-G-65 and ULTRA VOILET RAY complete all as specified and as directed for following capacity of tanks make : Rays cleantech or equivalent steps for seven stages are as under :- First Stage is to drain out the water by using exit valve or high capacity dewatering system. Second Stage is cleaning all the algae formation inside the tank by using TERBAC-G10 a laboratory tested branded chemical of the company and scrubbing the walls of the tanks. Third Stage is fresh water cleaning by high speed jet pump. Fourth Stage and first bacteria screening is decertification by using TERBAC-G5 a Govt laboratary certified branded halogen compound.
Fifth Stage is cleaning the floor of water tank by industrial vaccum cleaner. Sixth Stage of cleaning and third bacteria screening is to sterlize the floor of the water tank by using laboratory certified, branded strong oxidizing agent TERBAC-G65. Note : (a) Company will submit Govt laboratory test certificate of TERBAC-G5, TERBAC-G65, fix the sticker mentioning the date of cleaning & name of site and also provide, certificate confirming the completion of sterlization of watr tanks mentioning the name of station and date of cleaning. All the cleaning & sterlization staffs should be under accidental insurance coverage.
Semi UG Sump Capacity 10000 Gln
Semi UG Sump Capacity 20000 Gln
Semi UG Sump Capacity 30000 Gln
Semi UG Sump Capacity 50000 Gln
Semi UG Sump Capacity 60000 Gln
Semi UG Sump Capacity 75000 Gln
OHT of capacity 20000 Gln
OHT of capacity 30000 Gln
OHT of capacity 50000 Gln
OHT of capacity 60000 Gln
OHT of capacity 100000 Gln
Labour only for attending break down of 200 / 150 mm dia CI / DI / MS pipe line bursting / cracks and including cleaning / removal of broken pipe pieces of various lengths through gas cutting / manual cutting as per site requirement and including inserting necessary specials such as pipes, CI / DI Collar / mechanical Joints etc as per site requirement, testing for leakages of lead joints, testing and necessary dewatering complete all as specified and directed by Engr-in-Charge, for the following sizes:- Note 1 :- The quoted rate is deemed to be included the following:- (i) Arrangement of suitable Pump sets for dewatering at the time of attending break down. (ii) Necessary Earth Work, labour / trade men for attending break down. (iii) Labour element required for fixing CI / DI / MS pipes, specials, fittings etc. Note 2 :- M & L Lead joints, Supply only CI / DI / MS pipes, specials, fittings will be measured and paid separately under relevant items.
All as per SL item No.3 above but of 100 / 80 mm dia.
Supply only spigot and socket end Ductile Iron pipe class K 9 ISI marked as per IS 8329-2000 of size 100 mm dia
All as per above SL No 5 but of size 150 mm dia.
All as per above SL No 5 but of size 200 mm dia.
Material and labour for run lead joint for spigot and socket pipes (CI / DI) and fittings of size 80 mm including burningout lead joint complete all as specified and directed by Engr-in-Charge.
All as per above SL No 08 but of size 100 mm bore.
All as per above SL No 08 but of size 150 mm bore.
All as per above SL No 08 but of size 200 mm bore.
Supply only DI Specials (any type radius and angle) tapers any type straight increasing decreasing or double socket and ''Y junction double branch ,Collar, cross (all sockets or socket and spigot)caps and plugs up to 300 mm bore.
M & L for re-conditioning of battery 12/24 Volts, 90/180 AH complete including replacement of lead plate terminal and joints and charging of battery and Improve specific gravity up to 1280 and 2 volts of each cell including transportation of battery from site to civil work shop and back complete all as specified and directed by Engr-in-Charge.
Supply, install, testing and commissioning of 24V, 180 AH sealed maintenance free generator starting system with SMPS charger, factory charged including terminal clamps, copper lead of suitable size / length, with battery stand including taking down unserviceable one from the DG Set complete all as directed. Model AX1013235 of Cummins Pulse Ultra Plus or equivalent in Exide / Amron.
Supply, install, testing and commissioning of 24V, 150 AH sealed maintenance free generator starting system with SMPS charger, factory charged including terminal clamps, copper lead of suitable size / length, with battery stand including taking down unserviceable one from the DG Set complete all as directed. Model AX1013234 of Cummins Pulse Ultra Plus or equivalent in Exide / Amron.
Supply and fixing in repairs battery charger of capacity 12 / 24 volt electronic type with auto cut system complete all as specified and as directed.
M & L for replacement of battery lead sets of two (Red & Black) suitable for 180 to100 AH capacity up to 1.5 mtr long including GM terminals one end copper lug and other fixtures connecting both end with gun metal terminals as per existing all as specified.
Earthing complete with galvanised steel earth plate electrode 60 cm x 60 cm x 6 mm thick buried directly in ground vertically to a depth not less than 2.25 metres below ground level with top edge of earth plate at a depth not less than 1.5 metre below ground level, connected to galvanised iron or steel, earth strip 32 x 6 mm size by means of nuts, bolts check nuts and washers made of galvanised iron or steel, earth wire protected by galvanised iron pipe 15mm bore, medium grade and connected to main switch board or main control board / DG Set (Approx length of GI strip from earth plate to DG set 7.5 Mtrs) as directed and including concrete pit in PCC (1:3:6) type C1, pre-cast RCC cover slab 30 cm x 30 cm x 10 cm with one lifting handle made of 8 mm dia MS bar funnel wire mesh, 20 mm bore galvanised iron or steel pipe medium grade for watering charcoal or coke and salt in alternate layers, necessary excavation and earth work in any type of soil complete all as shown in electrical Plate No 3 of MES Schedule Part- I and testing on completion .
Disconnecting the delivery pipe line and electric connections of submersible pump set of capacity of 3.0 to 7.5 HP and lifting and removing it from its position along with pipes and fittings carefully with the help of required T&P and transporting the same to the work shop for repair / servicing and lowering and refixing the same in its original position including connecting up of water and electric connections including testing and commissioning complete all as specified.
Flushing of existing borewells of size 150 mm dia 90 Mtrs depth with drilling compressor including surging and flushing the bore at a pressure of 7 Kg / Sq cm complete with compressed air and flushing the sand, mud etc from the bore well till discharge of the fresh water including testing of water samples for chemical and bacteriological tests and yield testing for 8 hours complete all as specified and directed .
M&L for rewinding the submersible motor of 3 to 7.5 HP capacity, opening, removing the burnt windings, cleaning with cleaning agent rewinding the same with appropriate gauge of super enamelled copper wire of same gauge and same No of turns of existing make insulating winding with existing class of insulation varnishing baking, testing the pump to satisfactory performance complete all as directed by Engineer-in-charge
Opening the submersible pump set of 3 to 7.5 HP for inspection, repairs and re-assembling the pump and motor as per the original assembly after repairs / replacing the worn out unserviceable parts with new parts as ordered, including cleaning replacing the minor items like packing bolts, nuts washers and MS clamps etc and applying one coat of approved hammertene spray paint on exposed steel surface, making the pump and motor fully serviceable including lathework etc., and testing the same for satisfactory operation on its full load all as specified and directed by Engineer - in - Charge. Note: The quoted rate deemed to inclusive of replacement of Unserviceable necessary spare parts like thrust bearing set, Impellers, casing ring, Shaft sleeve, stage casing, neck ring stage mcasing, sand guard, middle sleeve and diffuser etc.
Supply and replace submersible pump starter suitable for AC 415 Volts, 50 Hz, 3 Phase submersible pump set of 3 to 7.5 HP capacity having single phase protection, over / under current protection, digital display, Auto ON / OFF timer control, including mounting on existing arrangements and removing the old unserviceable starter from the panel complete all as directed. Make: Naren Elextrix Model DOLDS with daily timer and PFR or equilent in Crompton / L&T / Havells.
M & L for repair & overhauling of squirrel cage induction electrical motor, 3 phase, 415 volts incl disconnecting all electrical connections, decoupling from pump, taking down the motor from foundation, cleaning and varnishing the stator & rotor winding, heating and drying, replacement of burnt terminals, greasing to bearings, re-assembling the motor and refixing of motor on the foundation by using new nut, bolts and washers, coupling with pump, checking alignment connecting all electrical connections, checking the vibrations, RPM, DOR, painting with one coat of synthetic enamel paint after preparing the surfaces and testing on full load all as directed and specified for the following capacities of motors:-
M & L for repair & overhauling of centrifugal pump set of any make, dismantling and taking down pump after disconnecting water supply connections, decoupling from motor removing out impeller, cleaning, descaling, greasing to bearings incl replacement of unserviceable parts such as bearings DE & NDE, pump shaft sleeves, coupling pully, pump shaft etc. Assembly in the pump with new packing materials, nuts, bolts & washers, gland bolt & packing, coupling bushes, coupling bolts and coupling with motor checking for vibration & alignment connecting delivery and suction pipe, painting with one coat of synthetic enamel paints testing the pump set all as directed by Engineer-in-Charge for the pump set of following capacities:-
M & L for repair & overhauling of monoblock pump set, taking out impeller, cleaning, descaling & greasing to bearings incl replacement of unserviceable parts such as bearings DE & NDE, gland flange, etc. Cleaning and varnishing the stator and rotar, winding, heating and drying replacement of burnt terminals of motor assembling in the pump with new packing materials nuts, bolts, washers checking alignment connecting all electrical / water connections, checking the vibrations & alignment, RPM, DOR, painting with one coat of synthetic enamel paint after preparing the surfaces, testing the pump set on full load all as directed by Engineer-in-Charge for the pumpsets of following capacities:-
Monoblock pump set 15 HP
Monoblock pump set 12.5 HP
Monoblock pump set 10 HP
Monoblock pump set 05 HP
Monoblock pump set 03 HP
Note for Sl item Nos 24 to 26 :- (i) cost of small U/S parts such as bearings DE & NDE, Pump shaft sleeves & Shaft, new packing materials, nuts, bolts & washers, gland bolt & packing, coupling bushes, coupling bolts are is deemed to be included in quoted rates
S & F teflon gland packing rope for industrial use of size 5mm to 50mm thick superior quality to centrifugal / monoblock pumps of following capacities all as specified and directed :-
Supply and replace pmpset coupling pully with rubber band, nuts & bolts suitable for pumpset of following capacity complete, all as directed
75 HP to 90 HP
40 HP to 60 HP
20 HP to 30 HP
Servicing / maintenance of dial type water level indicator by replacing worn-out central movement plate, counter weight, centre diving wheels etc., and applying two coats of synthetic enamel paint over a coat of primer complete all as specified and as directed.
M & L for arresting water leakage from sluice valve of 80 mm bore, by refacing, regrinding of sluice Valve, Repacking stuffing box of sluice valve spindle including taking apart and reassembling the same including replacing old check nuts with new one made out of MS / CI material, with and including replacing perished gland packing, rubber gasket, bolts and nuts complete all as directed by Engineer-in-charge.
All as per Sl. Item No.30 above but 100 mm bore
All as per Sl. Item No.30 above but 150 mm bore
All as per Sl. Item No.30 above but 200 mm bore
Supply and replace CI sluice valves, 150 mm dia , PN 1.0, conforming to IS -14846 Flanged end complete with iron wheel head and stainless steel spindle including flanged joints, replacement of perished nuts, bolts washers and rubber gasket etc. complete all as specified and directed by Engineer-in-charge.
All as per item No.34 above but 100 mm dia
All as per item No.34 above but 80 mm dia
S& F in replacement GI tubing , medium grade, with all fittings, complete fixed to walls and ceiling or laid in trenches / floors for 20 mm dia complete all as specified .
S& F in replacement GI tubing , medium grade, with all fittings, complete fixed to walls and ceiling or laid in trenches / floors for 25 mm dia complete all as specified .
S& F in replacement GI tubing , medium grade, with all fittings, complete fixed to walls and ceiling or laid in trenches / floors for 40 mm dia complete all as specified .
S& F in replacement GI tubing , medium grade, with all fittings, complete fixed to walls and ceiling or laid in trenches / floors for 50 mm dia complete all as specified .
S& F in replacement GI tubing , medium grade, with all fittings, complete fixed to walls and ceiling or laid in trenches / floors for 80 mm dia complete all as specified . Note for Item No 37 to 41 : Quoted rate inclusive of cost of necessary GI fittings.
Supply and fixing in replacement gun metal gate valve, with iron wheel head,screwed both ends, class II, and fixed complete including cutting of the pipeline and taking down old unsrviceable valves wherever required for 20 mm dia
Supply and fixing in replacement gun metal gate valve, with iron wheel head,screwed both ends, class II, and fixed complete including cutting of the pipeline and taking down old unsrviceable valves wherever required for 25 mm dia
Supply and fixing in replacement gun metal gate valve, with iron wheel head,screwed both ends, class II, and fixed complete including cutting of the pipeline and taking down old unsrviceable valves wherever required for 40 mm dia
Supply and fixing in replacement gun metal gate valve, with iron wheel head,screwed both ends, class II, and fixed complete including cutting of the pipeline and taking down old unsrviceable valves wherever required for 50 mm dia
Supply and fixing in replacement gun metal gate valve, with iron wheel head,screwed both ends, class II, and fixed complete including cutting of the pipeline and taking down old unsrviceable valves wherever required for 80 mm dia
M & L factory made and tested (CPRI approved) floor mounted, LT panel board indoor type, 415 volts, 3 phase, 4 wire, 50 HZ AC supply, having Aluminium busbar 400 Amps, with multifunction meter in each feeder, installed on epoxy insulators and panel shall be dust and vermin proof and made out of 2.00 mm thick CRCA mild steel sheet and angle iron of size 40x40x6 mm thick frame work, powder coated finish over a coat of red oxide primer on out side and in side, front and rear opening type, with aprons for cable entry with double door shutter and locking arrangement, internal wiring with PVC insulated solid copper conductor FRLS cables, IS -694 marked of adequate size but not less than 4 Sq mm and suitable to accommodate and including the following accessories complete all as specified and directed :- (a) Incoming :- (i) MCCB 160 Amps, 4 pole, 25 KA, 440V - 01 Nos (ii) ON- LOAD changeover switch with enclosure, operated panel mounting type 415 V 50 Hz, confirm of cap 200 Amps
(iii) LCD Multi function meter. (iv) LED indicating lamps (b) Outgoing :- (i) MCCB 63 Amps, 25 kA - 03 Nos (ii) Soft Starter for 18 KW (25 HP) - 02 Nos. Make L&T / ABB / Legrand / Schneider (ii) MCB 32 Amps, 4 pole, 25KA, 440V- 1 No. (iv) LED Multifunction meter with CT's for each pump complete. NOTE : Unit quoted rate shall be deemed included for supply and fixing of stencil letter writing with highly fluorescent sheet of best quality stickers, stick on panel boards with marking of identification of circuits & area of supply etc as directed.
Material and labour for cablofil hot dip galvanized cable trays, top cover, wall supports and jointing / fixing accessories for fixing over walls complete, size 54mm (Height) x 100mm (Width) all as per Cat No. CM000073 of Legrand-Cablofill or techno commercially equivalent in other makes specified.
Supply, laying PVC insulated Copper Conductor (sheathed), flexible cable, 1100 volts grade of size 3 core 10 Sq mm including taking out old un-serviceable cable complete all as specified and directed.
Supply, laying PVC insulated Copper Conductor (sheathed), flexible cable, 1100 volts grade of size 3 core 16 Sq mm including taking out old un-serviceable cable complete all as specified and directed.
Supply & replacement of water level indicator, 36" dia for OHT/UG sump as per IS and including numbering with radium stickering, heavy duty float, counter weight, heavy duty driving gear nylon wire fitted in all in GI housing, cutting the RCC slab and making good the slab, painting the exposed surface with two coats of synthetic enamel over a coat of red oxide primer complete all as specified and directed by Engr-in-Charge. Make: Centure meters
M & L for painting of monoblock pump set of 3 HP to 10 HP with a coat of approved colour paint including inlet & outlet pipe lines over a coat of red oxide primer on rusted parts complete including preparation of old painted surface and writing MES number all as specified and directed by Engr-in-Charge.
M & L for painting of Centrifugal pump set of 12.5 HP to 25 HP with a coat of approved colour paint including inlet & outlet pipe lines over a coat of red oxide primer on rusted parts complete including preparation of old painted surface and writing MES number all as specified and directed by Engr-in-Charge.
Supply and replace power contactor AC 3 Phase, 415 Volts, 50 Hz, 110 Amps, 2NO + 2NC robust and suitable for hostile application and size Fr 3 & confirm to IS/IEC 60947-4-1 & IEC 60947-4-1 complete all as specified and directed. Make: CAT No. ML 6 SS90921 of L&T or its equivalent in ABB/ BCH/ Siemens/ C&S Electric Ltd/ Schneider
Supply and replace power contactor AC 3 Phase, 415 Volts, 50 Hz, 70 Amps, 2NO + 2NC robust and suitable for hostile application and size Fr 3 & confirm to IS/IEC 60947-4-1 & IEC 60947-4-1 complete all as specified and directed. Make: CAT No. ML 4 SS90910 of L&T or its equivalent in ABB/ BCH/ Siemens/ C&S Electric Ltd/ Schneider
Supply and replace Electronic Timers of type ST 100, 415 Volts Time delay for 3 - 30 Seconds complete all as per directed. Make:- CAT No ST80328OOOO of L&T or its equivalent in ABB, BCH, Siemens , C&S Electric Ltd, Schneider
M&L for replacement of unserviceable water pressure guage with new water presure guage round dial type suitable for 15/25/30/40/100 HP pump set including tube and stop cock complete all as specified and directed
M & L for Jungle cleaning by cutting and clearing away all grass vegetation, wild growth, sapling, shrubs, brushwoods, under growth roots, cutting of bushes, tree trunk of girth not execeeding 30 cm, cutting of trunk, portion protuding over ground, filling holes and leveling of ground and removing unserviceable materials to a distance n.exe 50m, compelte all as speicified.
Material and labour for PCC (1:3:6) type C1 using 20 mm graded stone aggregate as a surface hard standing/ base foundation for the pipelines/Chlorine plant including necessary form work complete all as specified. (Note:- Quoted rates is inclusive levelling surface as per direction of EIC complete)
M & L for Brickwork with subclass 'B' old size bricks, straight or curved on plan exc 6m mean radius built in Cement mortar 1:4, including taking down old / broken padestals complete all as specified and directed.
M & L for 15 mm thick rendering in cement mortar 1:4 on fair faces of concrete or brick surface mixed with water proofing compound as per manufacturer's instruction finished even and fair without using extra cement complete all as specified and directed.
M & L for preparation of newly plastered surfaces of walls and applying three coats of whitewash complete all as specified and directed.
Excavation in trenches n.exc 1.5 mtr wide and n.exc 1.5 mtr depth for laying of cables / pipes etc and getting out in hard/dense soil. complete all as specified.
Returning, filling in including spreading levelling watering and well ramming in layers not exc 25 cm in any type of soil.
Removing excavated material to a distance n.exc 50 mtr and depositing where directed at a level n.exc 1.5 mtr above the starting point all as directed.
CHAITANYA CONSTRUCTIONS
Prasad and Suresh Constructions
THE VENKATESWARA SUPPLIERS
M/s KAMADHENU ENGINEERING CONSTRUCTIONS
M/S SRI VENKATA BHAVANI CONSTRUCTIONS
LAKSHMI SAI CONSTRUCTIONS
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.PDF
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .