SITC Work of Court BUILDING at Vyara , VYARA Dis. Tapi (Supplying and Installation of Fire Hydrant, Pump, Alarm System)

SITC Work of Court BUILDING at vyara , VYARA Dis. Tapi (Supplying and Installation of Fire Hydrant, Pump, Alarm System)

BILL OF QUANTITIES

Percentage Rate Tender

Item Description of Item Quantity Unit Rate In Amount

1 Supply. installation, testing & commissioning of ISI approved electrical 1 No. 73000.00

motor driven jockey pump set having 10.8 m3/hr. @ 70m head. The

pump unit shall be a horizontally direct mounted motor. Unit shall

comprise the following minimum requirements:(a) Pump, b) Electric motor

IE2, c) Foundation bolts, d) Mating flanges with gasket and fasteners, e)

Discharge gauges, etc. complete in all respect, with labour, with GST.

2 Supply, installation, testing & commissioning of Priming tank,HDPE type, 1 No. 44000.00

1000 litres, with necessary piping 100 mm size, G.I pipe for priming the

pumps, pipe of with butterfly valves for isolation, Water Filling to priming

tank by piping min. 50 mm size, ,with all complete.

3 Supply, fabrication & erection of aboveground G.I. 'C'- Class, ERW piping, 540.00 Mtr 410.00

conforming to IS:1239, part-I, Heavy class up to 150 mm dia. and

IS:3589, for size 200 mm dia. & above, thickness. G.I. pipe fitting's as per

IS: 1239, part-II, Heavy class for size 150 mm dia. & below & IS: 3589, for

size 200 mm dia. above, flanges, nuts bolts & washers, 3 mm thick gasket,

pipe hangers, etc. Hydrostatic testing for 2 hour's at 150% of the system

pressure, hook-up etc. Painting for piping, fittings & structural pipe

support, shall be two coat of zinc primer and two coats of fire red conf.

to IS: 5, Shade 536. Complete with all accessories as per approved

drawings, specicification and direction of the Engineer-in-Charge, with all

complete. (a) 25 mm dia.

4 Supply, fabrication & erection of aboveground G.I. 'C'- Class, ERW piping, 480.00 Mtr 510.00

conforming to IS:1239, part-I, Heavy class up to 150 mm dia. and

IS:3589, for size 200 mm dia. & above, thickness. G.I. pipe fitting's as per

IS: 1239, part-II, Heavy class for size 150 mm dia. & below & IS: 3589, for

size 200 mm dia. above, flanges, nuts bolts & washers, 3 mm thick gasket,

pipe hangers, etc. Hydrostatic testing for 2 hour's at 150% of the system

pressure, hook-up etc. Painting for piping, fittings & structural pipe

support, shall be two coat of zinc primer and two coats of fire red conf.

to IS: 5, Shade 536. Complete with all accessories as per approved

drawings, specicification and direction of the Engineer-in-Charge, with all

complete. (a) 32 mm dia

Item Description of Item Quantity Unit Rate In Amount

5 Supply, fabrication & erection of aboveground G.I. 'C'- Class, ERW piping, 320.00 Mtr 700.00

conforming to IS:1239, part-I, Heavy class up to 150 mm dia. and

IS:3589, for size 200 mm dia. & above, thickness. G.I. pipe fitting's as per

IS: 1239, part-II, Heavy class for size 150 mm dia. & below & IS: 3589, for

size 200 mm dia. above, flanges, nuts bolts & washers, 3 mm thick gasket,

pipe hangers, etc. Hydrostatic testing for 2 hour's at 150% of the system

pressure, hook-up etc. Painting for piping, fittings &

structural pipe support, shall be two coat of zinc primer and two coats of

fire red conf. to IS: 5, Shade 536. Complete with all accessories as per

approved drawings, specicification and direction of the Engineer-in-

Charge, with all complete. (a) 50mm dia.

6 Supply, fabrication & erection of aboveground G.I. 'C'- Class, ERW piping, 60.00 Mtr 750.00

conforming to IS:1239, part-I, Heavy class up to 150 mm dia. and

IS:3589, for size 200 mm dia. & above, thickness. G.I. pipe fitting's as per

IS: 1239, part-II, Heavy class for size 150 mm dia. & below & IS: 3589, for

size 200 mm dia. above, flanges, nuts bolts & washers, 3 mm thick gasket,

pipe hangers, etc. Hydrostatic testing for 2 hour's at 150% of the system

pressure, hook-up etc. Painting for piping, fittings &

structural pipe support, shall be two coat of zinc primer and two coats of

fire red conf. to IS: 5, Shade 536. Complete with all accessories as per

approved drawings, specicification and direction of the Engineer-in-

Charge, with all complete. (a) 65mm dia

7 Supply, fabrication & erection of aboveground G.I. 'C'- Class, ERW piping, 60.00 Mtr 1275.00

conforming to IS:1239, part-I,Heavy class up to 150 mm dia. and IS:3589,

for size 200 mm dia. & above, thickness. G.I. pipe fitting's as per IS:

part-II, Heavy class for size 150 mm dia. & below & IS: 3589, for size

mm dia. above, flanges, nuts bolts & washers, 3 mm thick gasket, pipe

hangers, etc. Hydrostatic testing for 2 hour's at 150% of the system

pressure, hook-up etc.Painting for piping, fittings & structural pipe

support, shall be two coat of zinc primer and two coats of fire red conf. to

IS: 5, Shade 536. Complete with all accessories as per approved

drawings, specicification and direction of the Engineer-in-Charge, with all

complete. (a) 80mm dia

Item Description of Item Quantity Unit Rate In Amount

8 Supply, fabrication & erection of aboveground G.I. 'C'- Class, ERW piping, 160.00 mtr. 1975.00

conforming to IS:1239, part-I, Heavy class up to 150 mm dia. and

IS:3589, for size 200 mm dia. & above, thickness. G.I. pipe fitting's as per

IS: 1239, part-II, Heavy class for size 150 mm dia. & below & IS: 3589, for

size 200 mm dia. above, flanges, nuts bolts & washers, 3 mm thick gasket,

pipe hangers, etc. Hydrostatic testing for 2 hour's at 150% of the system

pressure, hook-up etc. Painting for piping, fittings &

structural pipe support, shall be two coat of zinc primer and two coats of

fire red conf. to IS: 5, Shade 536. Complete with all accessories as per

approved drawings, specicification and direction of the Engineer-in-

Charge, with all complete. (a) 100mm dia

9 Supply, fabrication & erection of aboveground G.I. 'C'- Class, ERW piping, 280.00 Mtr 2550.00

conforming to IS:1239, part-I, Heavy class up to 150 mm dia. and

IS:3589, for size 200 mm dia. & above, thickness. G.I. pipe fitting's as per

IS: 1239, part-II, Heavy class for size 150 mm dia. & below & IS: 3589, for

size 200 mm dia. above, flanges, nuts bolts & washers, 3 mm thick gasket,

pipe hangers, etc. Hydrostatic testing for 2 hour's at 150% of the system

pressure, hook-up etc. Painting for piping, fittings &

structural pipe support, shall be two coat of zinc primer and two coats of

fire red conf. to IS: 5, Shade 536. Complete with all accessories as per

approved drawings, specicification and direction of the Engineer-in-

Charge, with all complete. (a) 150mm dia

10 Supply, installtion, testing & commissioing of Underground GI (ERW) 24.00 Mtr 2360.00

piping conforming to IS:1239, part-I, Heavy class ('C' class) up to 150 mm

dia. and IS:3589 Heavy class ('C' class), for 200 mm dia. & above, min.

6.35mm thickness including Heavy class fittings, anti-corrosive tape of size

150 mm wide x 4 mm thick, wrapping & coating with 13KV holiday

testing . Rates shall include sand bedding of 75mm dia all around,

backfilling of the excavated including installation of heavy pipe fitting's,

flanges, etc. 10 % of all the welded joints shall be done radiographically

tested and 50% of the joints radiographed shall be the "Field

Joints".Hydrostatic testing for 2 hours at 150% of the system pressure,

hook-up etc., complete with all accessories as per approved drawings,

specicification and direction of the Engineer-in- Charge, with all

complete. (Road Crossing) (a) 100 mm dia

Item Description of Item Quantity Unit Rate In Amount

11 Supply, installtion, testing & commissioing of Underground GI (ERW) 30.00 Mtr 2750.00

piping conforming to IS:1239, part-I, Heavy class ('C' class) up to 150 mm

dia. and IS:3589 Heavy class ('C' class), for 200 mm dia. & above, min.

6.35mm thickness including Heavy class fittings, anti-corrosive tape of size

150 mm wide x 4 mm thick, wrapping & coating with 13KV holiday

testing . Rates shall include sand bedding of 75mm dia all around,

backfilling of the excavated including installation of heavy pipe fitting's,

flanges, etc. 10 % of all the welded joints shall be done radiographically

tested and 50% of the joints radiographed shall be the "Field

Joints".Hydrostatic testing for 2 hours at 150% of the system pressure,

hook-up etc., complete with all accessories as per approved drawings,

specicification and direction of the Engineer-in- Charge, with all complete.

(Road Crossing) (a) 150 mm dia

12 Design , Supply and installation of Safety Signage made of Zinc 1800.00 Sq.in ch 8.00

Sulphilde based glow in dark , Rigid sheet with High Luminous property

enclosed in a transperent weather proof UV stabilized plastic pasted on

mm thick clear acrylic sheet such as EXITS, EMERGENCY EXIT, DO NOT

USE LIFT DURING FIRE, FLOOR MARKINGS, FIRE LIFT, STAIRCASE EXIT,

FIRE ALARM CALL POINT, FIRE HOSE REEL, FIRE HYDRANT POINT etc.

13 Supply, installation, testing & commissioning of pressure switch. 3 No. 2250.00

(Range 0 to 16 kg/cm2)

14 Supply, installation, testing & commissioning of 150 mm dia. dial Burdon 5 No. 2550.00

Type Glycerine Filled pressure gauge with isolation ball valve

arrangements with necessary isolation valves with all complete.( Range

15 Supply, installation, testing & commissioning of Cast iron body double 2 No. 7650.00

flanged gate valve With Rising Spinldle conf. to IS: 14846, PN-1.6 with

mating flanges, drilling as per IS/ANSI 150# with mating flanges,

galvanized nut, bolts & washers, gasket 3 mm thick, etc., with all

complete. (a) 80 mm dia

16 Supply, installation, testing & commissioning of Cast iron body double 2 No. 12000.00

flanged gate valve With Rising Spinldle conf. to IS: 14846, PN-1.6 with

mating flanges, drilling as per IS/ANSI 150# with mating flanges,

galvanized nut, bolts & washers, gasket 3 mm thick, etc., with all

complete. (b) 100 mm dia

17 Supply, installation, testing & commissioning of Cast iron body double 2 No. 18600.00

flanged gate valve With Rising Spinldle conf. to IS: 14846, PN-1.6 with

mating flanges, drilling as per IS/ANSI 150# with mating flanges,

galvanized nut, bolts & washers, gasket 3 mm thick, etc., with all

complete. (c) 150 mm dia

Item Description of Item Quantity Unit Rate In Amount

18 Supply, Installation, Testing & Commissioning of Cast iron body Butterfly 4 No. 2350.00

valve according to IS: 13095, PN- 1.6, Iron Disc for size 150 mm dia. &

below Lever operated and above 150 mm dia. Gear operated complete

with mating flanges /ANSI class # 150 with bolts & nuts washers, rubber

gaskets 3 mm thick, etc., with all complete. (a) 50 mm dia

19 Supply, Installation, Testing & Commissioning of Cast iron body Butterfly 4 No. 3000.00

valve according to IS: 13095, PN- 1.6, Iron Disc for size 150 mm dia. &

below Lever operated and above 150 mm dia. Gear operated complete

with mating flanges /ANSI class # 150 with bolts & nuts washers, rubber

gaskets 3 mm thick, etc., with all complete. (b) 80 mm dia

20 Supply, Installation, Testing & Commissioning of Cast iron body Butterfly 1 No. 3650.00

valve according to IS: 13095, PN- 1.6, Iron Disc for size 150 mm dia. &

below Lever operated and above 150 mm dia. Gear operated complete

with mating flanges /ANSI class # 150 with bolts & nuts washers, rubber

gaskets 3 mm thick, etc., with all complete. (c) 100 mm dia

21 Supply, installation, testing & commissioning of Cast iron body NRV conf. 2 No. 6850.00

to IS: 5312, PN-1.6 complete with mating Flanges/IS/ ANSI class # 150 with

bolts & nuts, washers, gaskets 3 mm thick, etc., with all complete

Accessories (a) 50mm dia

22 Supply, installation, testing & commissioning of Cast iron body NRV conf. 3 No. 8750.00

to IS: 5312, PN-1.6 complete with mating Flanges/IS/ ANSI class # 150 with

bolts & nuts, washers, gaskets 3 mm thick, etc., with all complete

Accessories (b) 80 mm dia

23 Supply, installation, testing & commissioning of Cast iron body NRV conf. 2 No. 10500.00

to IS: 5312, PN-1.6 complete with mating Flanges/IS/ ANSI class # 150 with

bolts & nuts, washers, gaskets 3 mm thick, etc., with all complete

Accessories (c) 100 mm dia

24 Supply, installation, testing & commissioning of SG iron body SinglePlate 1 No 2100.00

Wafer Type NRV conf. to ASTMA 536, PN-1.6 complete with mating

Flanges class # 150 with bolts & nuts, washers, gaskets 3 mm thick, etc.,

with all complete. Accessories (a) 100 mm dia

25 Supply, installing, testing and commissioning of Normax make CI heavy 2 No 4900.00

duty ball type foot valve with flanges, nut bolts, gaskets etc. with

necessary complete accessories.(a) 100 mm dia

Item Description of Item Quantity Unit Rate In Amount

26 Supply, installing, testing and commissioning of Normax make CI heavy 1 No 14500.00

duty ball type foot valve with flanges, nut bolts, gaskets etc. with

necessary complete accessories.(b) 150 mm dia

27 Supply, installation, testing & commissioning of Four way fire brigade Inlet 2 No. 10500.00

connection with 63 mm dia. stainless steel (SS304) instantaneous male

inlets with built in non return valve in each inlet with 150 mm dia. header

pipe, suitable rubber cap and GI chain including nuts, bolts, washers,

gasket 3 mm thick, etc. with all complete.

28 Supply, installation, testing & commissioning of Oblique pattern type 12 No. 6350.00

stainless steel (SS 304) single headed External Fire Hydrant Valve with

mm dia. female instantaneous outlet conf. to IS: 5290, type - A, including

mating flanges, galvanised nuts, galvanised bolts/studs, washers &

gaskets 3 mm thick with all complete.

29 Supply, installation, testing & commissioning of 63 mm dia. stainless steel 12 No. 2050.00

(SS 304) Universal Branch Pipe conf. to IS:

30 Supply & installation, testing & commissioing of Fire Fighting Hose - conf. 12 No. 8140.00

to IS : 636, type B (type- 3), The fire hose shall be 15 m long with 63 mm

dia. stainless steel (SS 304) couplings conf. to IS: 903, at both the ends for

connection with the hydrant valve and the branch pipe.

31 Supply, installation, testing & commissioning of fabricated from 3 mm MS 12 No. 4620.00

sheet, hose box of size-450 mm x 600 mm x 250 mm - painted with Fire

Red as per IS: 5, shade no. 536 front 3 mm thick transparent glass with

lock & key, handle and brass hinges - to accommodate one number of

mtr long hose and one number of universal branch pipe, including

supporting arrangement with civil work.

32 Supply, Installation, testing & commissioing of Swinging type mild steel 12 No. 8650.00

hose reel drum with 20 mm dia. x 30 mtr. rubber hose as per IS: 884. The

mounting stand shall be of mild steel and the hose shall be fitted with a SS

shut-off nozzle & SS ball valve of 25 mm dia. including supporting

arrangement with all complete. accessories

33 Supplying, fixing & testing of of SS ball Valve 25mm dia. (Thread) 15 No. 825.00

34 Supplying, fixing & testing of New Battery of diesel engine (a) 150 Amp. 1 No. 14500.00

35 Supply and installation of Diesel Tank For Diesel Engine With All 1 No 17500.00

Accessories 100 Ltr

36 Supplying, filling & testing lube oil for diesel engine 1 Ltrs 375.00

37 Supply and commissioning of Oil Filter. 1 No. 825.00

38 Supplying, filling of diesel in diesel engine tank 1.00 Ltrs 75.00

39 Filling Of Gaps Between pipe and Core Cutting Hole With Chemical and 10 No 450.00

Item Description of Item Quantity Unit Rate In Amount

40 Supply,fabrication and erection of Structure MS Material as like 300.00 Kg. 100.00

Angle, C channel,I Beam Etc.

41 Supply, installation and commissioning of Flexible cable for 1.5 sq mm x 30.00 Mtr 85.00

3 core for pressure switch

42 Supply, installation and commissioning of Copper Armour cable for 10 HP 30.00 Mtr 220.00

Motor - 4 sq mm x 3 Core (Only Fire Panel to Fire Pump)

43 Supply, installation and commissioning of Copper Armour cable for 40 HP 30.00 Mtr 390.00

Motor - 10 sq mm x 3 Core (Only Fie Panel to Fire Pump)

44 Supply, installation and commissioning of Copper Armour Cable for Diesel 20.00 Mtr 160.00

Engine Battery Charger - 2.5 sq mm x 3 core.

45 Supply, Filling and Fixing of approved make ABC type fire extinguisher - 6 10 No 1800.00

Kg. Capacity as per IS:15683 & IS :14609.

46 Supply, Filling and Fixing of approved make CO2 type fire extinguisher. 10 No 4300.00

Capacity 4.5 Kg. (conforming to IS-15683).

47 Supply, Filling and Fixing of approved make ABC Moduler type 5 No 3000.00

automatic fire extinguisher. Capacity 5 Kg. (conforming to IS-15683).

48 Submitting the application to obtain Fire NOC for 3 Years 1 No 80000.00

49 Supply, Installation and commissioning of Fire Alarm Panel Conventional 2 No 25000.00

type, 4 zone, with complete accessories.

50 Supply, Installation and commissioning of smoke detectors / heat 80 No 860.00

detectors, with complete accessories.

51 Supply, Installation and commissioning of Audio hooters , with 15 No 800.00

complete accessories.

52 Supply, Installation and commissioning of Manual Call Points, with 15 No 700.00

complete accessories.

53 Cable(Armour) for Fire Alarm system 2 core 1.5 mm FRLS PVC ARMOURED 1500.00 Mtr 85.00

54 Core cutting in wall and in RCC slab with size as 50 mm dia. Hole 6 No 450.00

55 Core cutting in wall and in RCC slab with size as 80 mm dia. Hole 3 No 450.00

56 Core cutting in wall and in RCC slab with size as 100 mm dia. Hole 10 No 550.00

57 Core cutting in wall and in RCC slab with size as 150 mm dia. Hole 3 No 650.00

58 Core cutting in wall and in RCC slab with size as 200 mm dia. Hole 1 No 900.00

Item Description of Item Quantity Unit Rate In Amount

59 KIRLOSKAR MAKE MAIN PUMPSET: Supply, installation, testing and 1 Set 155000.00

commisioning of Main Electrical PumpType:- Back pull out , centrifugal,

Single Stage End SuctionDB 100/26, Cap-97 m3/hr@ 70 m Head, End

Suction type.Gland PackingMaterial of Construction –Casing / casing

cover/diffusers/ inserts = CIImpeller = BronzeWear Rings

(Casing/Impeller)= CIShaft = 40C8Shaft Sleeve = SS 410BBL/CG/HMI or

EQUIVALENT IE2 TEFC MOTOR 40 Hp / 3 ph 2900 RpmCapacity:

M3/Hr, 70 M (IS Approved)

60 Diesel Engine PUMP: Supply, installation, testing and commisioning of 1 No 445000.00

KIRLOSKAR MAKE DIESEL ENGINE PUMP SET CPHM 40/26 Cap- 97 m3/hr

@ 70 m Head, End Suction type. Gland Packing Material of Construction

– Casing / casing cover/diffusers/inserts = CI Impeller = Bronze Wear

Rings (Casing/Impeller )= CI Shaft = 40C8 Shaft Sleeve = SS 410

61 Fire Hydrant Panel suitable for 10 hp Jockey pump, 40 hp (96 m3/hr @ 70 1 No 97000.00

m head) main electrical pump and 50 hp (96 m3/hr @ 70 m head) Diesel

engine operated pumpA) IncomerMCCB - 1 NosR Y B Indication -

SetVAF Digital Meter - 1 SetB) OutgoingF1 40 HP Star Delta Starter - 1 For

Main pumpF2 10 HP DOL Starter - 1 For Jockey PumpF3 Auto - On / Off

Diesel Pump With Battery ChargerControl Circuit With Auto - Manual

On/OffOn/Off Trip IndicationOn/Off Push ButtonC) FabricationDully

Powder Coated PO Red Colour,Fabricated From 14/16 SWG,GI Sheet,IP-

42 Protection,-Fixed Type Floor MountedCable Entry : Bottom

62 Supply, Installtion, Testing & Commissioing of Standard Response 150 No 355.00

Sprinkler, Pendent Brass Sprinkler, Quartzoid Bulb type with crome finish,

nickel crome platde, K factor K-80, Temp.- 680C, 1/2" end connection

including resessed escutcheon. (UL Listed).

63 Add Annual maintenance Contract for 3 year 3 No 50000.00

64 Excavation for foundation upto 1.5 m depth including sorting out and 75.00 Cumt 120.01

stacking of useful materials and disposing off the excavated stuff upto

Meter lead.(A) Loose or soft soil

65 Excavation for foundation for depth from 1.5 m to 3.0 m including 75.00 Cumt 166.44

sorting out and stacking of useful materials and disposing off the

excavated stuff upto 50 Meter lead.(B) Dense or Hard soil

66 Excavation for foundation for depth from 3.0 m to 5.0 m including 18.00 Cumt 178.58

sorting out and stacking of useful materials and disposing off the

excavated stuff upto 50 Meter lead.(B) Dense or Hard soil

Item Description of Item Quantity Unit Rate In Amount

67 Providing and laying controlled cement concrete M150 for curing 8.00 Cumt 4225.34

complete including cost of formwork but excluding the cost of

reinforcement for reinforced concrete work in (A) Foundations, footings,

Base of columns, Plinth Slab and Mass concrete.

68 Providing and laying controlled cement concrete M.250 and curing 15.00 Cumt 4638.93

complete including the cost of formwork and excluding reinforcement for

reinforced concrete work in (A) Foundations, footings, and Mass concrete.

69 Providing and laying controlled cement concrete M.250 and curing 7.50 Cumt 5698.09

complete excluding the cost of formwork and reinforcement for reinforced

concrete work in (C) Slabs, landing, shelves, Balconies, Lintels, Beams,

Girders and Cantilever upto floor two level.

70 Providing and laying controlled cement concrete M.200 and curing 7.00 Cumt 6199.86

complete including the cost of formwork and excluding reinforcement for

reinforced concrete work in (C) Ground floor Slab

71 Providing and laying controlled cement concrete M-200 and curing 3.00 Cumt 7304.36

complete including the cost of form work but excluding the cost of

reinforcement for reinforced concrete work in Columns, pillars posts and

struts Ground Floor

72 Providing and laying controlled cement concrete M-250 and curing 4.00 Cumt 6236.84

complete including the cost of form work but excluding the cost of

reinforcement for reinforced concrete work in Ground & Plinth BEAMS

73 Providing and laying controlled cement concrete M.200 and curing 4.00 Cumt 6199.86

complete including the cost of formwork and excluding reinforcement for

reinforced concrete work in (C) Ground floor Beams,

74 Brick work using common burnt clay building bricks having crushing 37.00 Cumt 4121.55

strength not less than 35 kg./Sq.Cm. in foundation and plinth in Cement

Mortar 1:5. (1- Cement : 5 -fine sand)(B) Conventional below plinth

75 Providing and laying controlled cement concrete M.250 and curing 23.00 Cumt 8905.59

complete excluding the cost of formwork and reinforcement for reinforced

concrete work in (B) Walls, from top of foundation level upto floor two

76 Providing 15mm thick cement plaster in single coat on Rough (Similar) side 278.00 Sqmt 222.24

of single or half birck walls / concrete wall for interior plastering and

finished even and smooth in C M 1:4 (1 cement : 4 coarse sand) with

floting coat of neat cement slurry etc. comp. For Ground floor

Item Description of Item Quantity Unit Rate In Amount

77 P & L antiskid ceramic tiles 30 x 30 cm size 6 mm thick in flooring treads 165.00 Sqmt 929.39

of steps and landing laid on a bed of 12 mm thick cement mortar 1:3(1-

cement:3-coarse sand)finishing with flush pointing in white cement

78 Providing and fixing C.I. Manhole cover 0.60 M. x 0.45M. size having 3 Nos 958.17

weight not less than 35Kg.

79 Providing IS Mark TMT FE 500D bar reinforcement for RCC work including 6465.00 Kg 77.29

bending & placing in position complete up to All floor Level

80 20 mm thick Sand faced cement plaster with 18x8 mm grooves as 99.00 Sqmt 389.46

suggested by this office consisting of 12 mm thick backing coat of C.M. 1:3

( 1 cement : 3 coarse sand ) and 8 mm thick finishing coat of C.M. 1:1 (

cement : 1 coarse sand) for all heights as directed etc. complete. and as

per pattern sample aprroved by the architect or directed engineer in-

81 Providing 10 mm. Thick cement plaster in single coat for plastering on 40.00 Sqmt 155.22

ceiling and soffits of stairs and finished even and smooth in : (I) Cement

mortar 1:4 (1 cement : 4 sand) including Mala troveled finish etc.

complete. Ground Floor

82 P & L 60x45 cm Machine polished Machine cut Blue Kota Stone slab 40.00 Sqmt 1084.30

flooring over 20 mm (average)thick base of cement mortar 1:6 (1-cement

6-coarse sand) or L.M 1:1.5 (1 Lime putty : 1.5 coarse sand laid over and

jointed with grey cement slurry mixed with pigment to match the shade of

slab including rubbing and polishing etc.complete (A) 30mm thick

83 Applying two coats of acrylic lapy (putty) & two coats of primer of 127.00 Sqmt 40.59

approved brand and manufacture on new wall surface to give an even

shade including thoroughly brushing the surface free from mortar

dropping and other foreign matter and sand papered smooth.

84 Wall painting (two coats) with plastic emulsion paint of approved brand 89.00 Sqmt 81.38

and manufacture on undecorated wall surface to give an even shade

including throughly brushing the surface free from mortar droppings and

other foreign matter and sand papered smooth.

85 Wall painting (two coats) with plastic emulsion paint of approved brand 38.00 Sqmt 86.92

and manufacture on undecorated ceiling surface to give an even shade

including throughly brushing the surface free from mortar droppings and

other foreign matter and sand papered smooth.

Item Description of Item Quantity Unit Rate In Amount

86 Wall Painting (Two coats) with weather proof 100 % acraylic emulsion 96.00 Sqmt 117.40

(Apex or equivalent type) paint of approved brand and manufacture and of

required shade on exterior wall surface to give an even shade over and

including primery coat with Alkaly resistance primer of approved brand

after thoroughly brushing surface to remove all dust and remains of loose

powdered material etc. copm. for all height

87 Providing and fixing rolling shutters of approved make made of 80 mm 5.00 Sqmt 3554.40

wide M.S laths inter-locked together through heir entire length and jointed

together at the ends by end locks mounted on specially designed pipe

shaft with bracket plates,guide channels and arrangement for inside and

outside locking with push-pull operation including the cost of hood cover

and sprig etc.complete(A) Shutters having width below 3.5M

88 Providing and fixing window having extruded aluminum Colour anodized 4.00 Sqmt 1713.70

section frame main outer size 63.50 x 38.10 x 1.95 mm(of Jindal Section

no:4605,@ Wt 1.094 Kg / Rmt), horizontal two track member size

mm x 31.75 mm x 1.20mm (of Jindal Section no: 8687 @ wt.of

Kg/mt), vertical member of size 61.85 mm x 31.75mm x 1.30 mm (of Jindal

Section no:8758 @ wt.of 0.0.659 Kg/mt) with sliding shutters of horizontal

member size 40mm x 18mm x 1.29mm (of Jindal Section no:8949 @ wt.of

0.456Kg/mt), vertical member of size 40mm x 18mm x 1.29mm (of Jindal

Section no:8947 @ wt.of 0.456Kg/mt/ Section 8948, @ Wt. 0.457 Kg/mt)

with 5 mm thick transparent bronze colour tinted float glass with powder

coated aluminum fittings and fixtures and transparent silicon sealant glass

fixing to frame as per details etc complete for window.

89 Providing and laying controlled cement concrete M-200 and curing etc. 1.00 Cumt 6499.46

complete including the cost of form work and reinforcement for

reinforced concrete work in (c) Chhajja for Ground floor

90 Providing and laying water proofing treatment with broken chine mosaic 38.00 Sqmt 765.97

flooring for terrace using 12 mm to 20 mm broken pieces of glazed tiles

to be laid over cement mortar 1:3 to plain or slope and to be tempered

to bring mortar creme out upto surface using white cement including

rounding off junctions and extending them upto 15 cm along the wall,

clearing with water and oxalic acid etc. as directed.

Item Description of Item Quantity Unit Rate In Amount

91 Providing and laying cement concrete flooring 1:2:4 (1-cement : 2-coarse 38.00 Sqmt 358.71

sand : 4-graded stone aggregate 20mm nominal size) laid in one layer and

finished with a floating coat of neat cement. (B) 50mm thick.

92 Providinfg and fixing Safty grills of required pattern for windows/ Door 72.00 Kg 112.11

using necessary M.S angle/ M.S pipe, M.S flats and other structural steel

at required spacing including cutting, welding and fabriction etc. including

one coat of primer of approved quality and two coats of oil painting as per

detail drawing etc complete.

93 Providing and fixing mirror polished 18 mm thick Green Marble stone with 5.00 Sqmt 2011.92

full round edge and polished of approved quality in clading on sill and

around the doors/ windows/ ventilation with 12 mm thick cement mortor

CM (1:4) and fixing with cement slurry & adhesive including moulding of

exposed edges as directed by engineering in charge etc. complete.

94 Providing and laying controlled cement concrete M-200 and curing etc. 1.00 Cum 7498.49

complete including the cost of form work and reinforcement for

reinforced concrete work in (c) Lintal for Ground floor

Rupees Fifty Seven Lacs Sixteen Thousand Five Hundred Four And Thirty Five Paise Only

I/We am/are willing to carry out the work at………………….% above/below percent(Should be written in figures and words) of the

estimated rate mentioned above. Amount of my /our

Tender works out as under.

Estimated amount put to tender Estimated amount put to tender

Deduct………% below Add………% Above

In words In words

The Contractor shall exhibit a board with detailed specification and details of work as directed by the Engineer-In-Charge for

which no extra payment shall be made.

2 The labour cess will be deducted as per prevailing rules i.e. 1% of the work done.

3 Income tax TDS will be deducted at a source while making payments of bills

In all R.C.C. Items in Rate Analysis Standard Cement Consumption has been taken as per Govt. G.R.: PRC-10/2017 Cement

Consumption/16/C Date:11/05/2017 as stated in S.O.R. therefore in R.C.C. items where there is a change as per actual mix

4 design the cost of difference of cement consumption have been deducted from the rate of original item at the rate of input rate

mentioned in all the tender.

Executive Engineer

Tapi ( R & B ) Division