Loading
Loading…
Loading…
Tender Value
₹1.7 L
EMD Value
₹4,227
Closing Date
29 Sept 2026, 3:00 pm2d left
Asst Engineer
Asst Engineer LID EW
CIVIL WORK
2026_LSGD_871643_1
5/AE/LSGD/VPTY/26-27
Open Tender
Civil Works - Buildings
Percentage
varappetty
Please refer Tender documents.
7 documents required · 7 mandatory
₹555
Yes
₹4,227
Yes
22 Sept 2026
22 Sept 2026
1 Oct 2026
22 Sept 2026
29 Sept 2026
22 Sept 2026
22 Sept 2026 - 29 Sept 2026
This is a percentage-rate BOQ. The schedule below shows estimated quantities and rates. Bidders quote a single percentage above or below the total estimated cost.
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1painting | |||||
| 1.001 | 13.98.1:Wall painting with plastic emulsion paint of approved brand and manufacture to give an even shade:One or more coats on old work | 610.1 | sqm | 113.94 | ₹69,514.79 |
| 1.002 | 13.99.1:Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade :One or more coats on old work | 138.38 | sqm | 108.55 | ₹15,021.15 |
| 1.003 | 15.7.3:Demolishing brick work manually / by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-Charge.In lime mortar | 0.57 | cum | 880.26 | ₹499.11 |
| 1.004 | 15.12.2:Dismantling doors, windows and clerestory windows (steel or wood ) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead:Of area beyond 3 sq. metres | 1 | each | 519.85 | ₹519.85 |
| 1.005 | 50.9.1.1:Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length (hold fast lugs or dash fastener shall be paid for separately), using good quality Anjili wood /jack wood | 0.05 | cum | 1,13,059.42 | ₹5,426.85 |
| 1.006 | 50.9.3.1:Providing and fixing paneled or paneled and glazed shutters for doors, windows and clerestory windows, 30 mm thick shutters including ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws, excluding paneling which will be paid for separately, all complete as per direction 0f Engineer in- charge. using Anjili/ Jack wood | 0.96 | sqm | 3,230.18 | ₹3,100.97 |
| 1.007 | 50.9.4.1:Providing and fixing paneling or paneling and glazing in paneled or paneled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured) paneling for paneled or paneled and glazed shutters 25 mm to 40 mm thick using good quality Anjili/ Jack wood | 1.35 | sqm | 2,879.52 | ₹3,887.35 |
| 1.008 | 50.6.1.3:Solid block masonry using pre cast solid blocks (Factory made) of size 40x20x20cm or nearest available size confirming to IS 2185 Part I of 1979 for super structure above floor two level up to floor V level thickness 20cm and above in: CM 1:6 ( 1 cement :6 coarse sand) etc complete | 0.5 | cum | 8,452.2 | ₹4,259.91 |
| 1.009 | 13.1.1:12 mm cement plaster of mix:1:4 ( 1 cement : 4 fine sand) | 1.32 | sqm | 369.76 | ₹488.08 |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.04 MB
293sbd.pdf
Tender Documents • 1.63 MB
BOQ_1477705.xls
BOQ • 0.32 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .