Annual Plan-Kodassery Grama PanchayathKalikkal mininagra Drinking water scheme ward 20-General Electrical Work

Amount

ELECTRICAL WORK

OD50862/2024-2025:Supply of 3 phase 5.5 KW/ 7.5 HP, Openwell 2Stage, Vertical submersible motor pumpset capable to discharge 300 to 1000 lpm corresponds to 49 to 18 meter head range, outlet dia 65mm suitable to work with 415 V 50 Hz, AC supply, makes preferred special impeller Deccan 7DT/2 or equivalent Kirloskar.

OD59078/2024-2025:Supply of Dry Run cum Mobiole Controller -Automatic DOL starter with Contactor 16A L&T, DOL ( with Controller PCR-10 Well tech Suitable for 7.5 HP ,3Phase, 415 V,50 Hz, WMC -10 ,mobile Controller CT-60/30Ma, Transformer 440/12V, panel size 330 x460 x150 mm Powder coating -Siemence gray with ON, Off , A/M Switch ,LED i/C,OG terminals etc. .

OD50864/2024-2025:Installation, testing and commissioning of 7.5hp Vertical submerssible pumpset after lowering down using tripod chain block with required accessories, fixing using supplied CI adaptor attaching new nylon rope, laying and extending GI 65mm discharge line as per standard etc. as required.

OD50865/2024-2025:Supply and providing Borewell clamp(patta type )with required accessories for 7.5HP Submerssible pumpset ,65mm discharge line in position.

OD50866/2024-2025:Supply and providing good quality marine Nylon rope 14 mm (white/green) for tying the pump set with required object outside the sump/well as required.

90.17.8.5:Providing, laying, testing & commissioning of 'B' class heavy duty G.I. pipe conforming to IS 1239 including welding, fittings like elbows, tees, flanges, tapers, nuts, bolts, gaskets etc. and fixing the pipe on the wall/ceiling with suitable clamp/support frame and painting with two or more coats of synthetic enamel paint of required shade complete as required :65 mm

OD50867/2024-2025:Supplying, threading, laying and joining GI bend pipe 65 mm in leak proof condition or nearest size with accessories required.

OD50868/2024-2025:Supply and providing 65mm dia GM/ brass or nearest size wheel valve or gate valve in leak proof condition as required.

OD50869/2024-2025:Supply and providing of 65 mm dia Non- return valve GM/ brass or nearest size at delivery line in leak proof condition.

OD50870/2024-2025:Supply, conveyance and providing 75 x 40 mm size, medium-5.2 mm wall thick, rolled steel channel (ISMC) on the parapet of open well for supporting pipeline and pump set, including painting with two coats of enamel paint over a coat of zinc chromate primer etc as required.

90.6.6.3:Supply and drawing FRLS PVC insulated & sheathed 650/1100 V grade 3 core copper conductor flat cable for submersible pump motor conforming to IS 694 part I 1990 as required including giving necessary connections of the following sizes.4 sq mm

1.17.11:Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface / recessed steel/ PVC conduit as required.2 x 2.5 sq. mm

90.14.24.2:Supply & fixing the following Power Capacitors 3 phase delta connected in positon and giving connection.2 KVAr, 3 phase, 440 V, delta connected standard duty Metalised Poly Propylene Capacitor, Cylinderical Type, suitable for direct connection to motors.

90.6.10.2:Supply and fixing of following sizes of light gauge PVC conduit along with accessories in surface/ recess including cutting the wall and making good the same in case of recessed conduit as required25 mm

2.13.2:Supplying and fixing following rating, four pole, 415 volts, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required.63 amps

2.15.3:Supplying and fixing following rating, four pole, (three phase and neutral), 415 volts, residual current circuit breaker (RCCB), having a sensitivity current upto 300 milliamperes in the existing MCB DB complete with connections, testing and commissioning etc. as required.63 amps

OD50871/2024-2025:Supply and providing multifunction meter to read V, A, f 3 phase accuracy class one.

5.4:Earthing with G.I. earth plate 600 mm X 600 mm X 6 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required.

5.9:Supplying and laying 25 mm X 5 mm G.I strip at 0.50 metre below ground as strip earth electrode, including connection/ terminating with G.I. nut, bolt, spring, washer etc. as required.(Jointing shall be done by overlapping and with 2 sets of G.I. nut bolt & spring washer spaced at 50mm)

6.12:Providing and fixing testing joint, made of 20 mm X 3 mm thick G.I. strip, 125 mm long, with 4 nos. of G.I. bolts, nuts, chuck nuts and spring washers etc. complete as required.

90.16.1.1:Supply and drawing bare earthing conductors of the following sizes along with wiring/ cables and giving connection as required2.00 mm copper conductor ( 14 SWG)

90.16.1.2:Supply and drawing bare earthing conductors of the following sizes along with wiring/ cables and giving connection as required2.65 mm copper conductor (12 SWG)

90.16.1.3:Supply and drawing bare earthing conductors of the following sizes along with wiring/ cables and giving connection as required3.15 mm copper conductor ( 10 SWG)

OD50873/2024-2025:Supply and laying bare earthing conductors of 3.15 mm copper conductor (10 SWG) laid 0.6 mtr below ground level including excavating trench of suitable size and refilling etc. as required ( in ordinary soil).

90.16.5.1:Supply of superior quality copper earth socket for the following size of earth conductor including crimping etc. as required.2.00 mm (14 SWG)

90.16.5.2:Supply of superior quality copper earth socket for the following size of earth conductor including crimping etc. as required.2.65 mm (12 SWG)

90.16.5.3:Supply of superior quality copper earth socket for the following size of earth conductor including crimping etc. as required.3.15 mm (10 SWG)

OD50874/2024-2025:Supply and providing the following sizes of bolt and nut with washers on the existing M.S box/ earth bus etc. as required including drilling necessary holes as required. 25x3mm brass nut and bolt .

OD50875/2024-2025:Supply and providing the following sizes of bolt and nut with washers on the existing M.S box/ earth bus etc. as required including drilling necessary holes as required. 25x6mm brass nut and bolt .

OD50876/2024-2025:Supply threading laying and joining of the 20 mm dia B class GI pipe with all required accessories in ground in the existing trench as protective covering to earth leads.

OD50877/2024-2025:Supply and installation of 415V, 32A TPN AC 23A switch disconnector unit including HRC fuses in sheet steel enclosure complete with handle, door interlock and pad locking using necessary bolts and nuts, fixing the unit to wall, CSSDF32D3N ,HSN CODE8537.making good the damages, colour washing etc. including giving necessary connections as required.

OD50880/2024-2025:Supply and providing GS-MB 3750 (inside 350X481X210 mm) meter box for fixing KSEB meter with hinged door and vision panel etc, fixed on wall and giving connections as required. (Sintex or equivalent make)

90.14.5:Supply and fabrication conveyance and installation of angle iron frame work for wall mounting panel board

OD50881/2024-2025:Supply and providing M8 eye bolt hook in wall / parapet for binding support for KSEB service main.

OD50882/2024-2025:Supply, and providing 0.5A to 2 A SP MCB and giving connection as required .

OD50883/2024-2025:Supply and providing 100/65 mm GI reducer joining &fitting inleak proof condition using appropiate accessories etc.

OD50884/2024-2025:Supply and providing 65 mm dia heavy duty GI union coupling in position threaded pipe welded suitably in leake proof condition in the discharge line '

OD50886/2024-2025:Supply and fixing the following accessories in the existing meter board and giving connections etc.(32 A, 415 V 2 way neutral Link mounted on DMC/SMC base)

OD50887/2024-2025:Supply and fixing the following accessories in the existing meter board and giving connections etc.(32 A, HRC Fuse Base with HRC Fuse link)

OD50888/2024-2025:Charges for preparing application/completion forms with sketch/scheme etc for KSEB connections

Paulson M I

Bidder Name

JIJU P S

Paulson M I