ADDN/ALTN TO SMALL ARMS RANGE AND STATION GYMNASIUM COMPLEX AT AF STN SAMANA UNDER GE (AF) JAMNAGAR NO 1

Dismantling of floor, hearth or wall tiling or stone slab laid, bedded & pointed in any mortar including demolition of cement mortar bedding or backing coat, including removal of debris to a distance exc 1.5 km but n.exc 2 km complete all as specified and directed.

M&L Rendering 10mm thick in CM 1:4 on on stone masonry surfaces or surface other than fair face of brick-work or on one side of lathing for skirting/dado etc complete all as specified and directed

M&L for Screed bed or bedding layer of mortar 15 mm thick for laying floor finishes in CM 1:6 complete all as specified and directed

M&L for Glazed ceramic tiles in vertical surface 350x 250x 7 mm/ 450X 300X 7 mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match complete all as specified and directed

M&L for Non skid, coloured ceramic tiles 7 to 8 mm thick (Square / rectangular) polished area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm as in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed

M&L for light shade Vitrified Ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors/skirting etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed

M&L Green Marble work 15 to 18 mm thick (table rubbed and polished) in steps, jambs, pillars, window/door cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with marble shade complete all as specified and directed

S&F 20mm outer dia CPVC pipes SDR 11 & plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified and directed

S&F 32mm outer dia CPVC pipes SDR 11 & plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified and directed

S&F 15mm size angular Stop valves, cast copper alloy, CP,screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed

S&F 15mm dia size Bib taps, CP,cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed

S&F 15 mm bore Pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and directed

S&F two way angle valve brass chromium plated, fancy type complete all as specified and as directed.

S&F Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete all as specified and directed

S & F Tubular towel rail, 20mm dia, D type, 600mm long between flanges chromium plated complete all as specified and directed

S&F vitreous china wash down water closet pan (pedestal pattern) white with CI 'P' or 'S' trap incl water closet seat cover of plastic,jet etc.complete incl necessary PVC waste pipe fitting, complete all as specified and directed by Engineer-in-Charge

S&F 10 Litre capacity PVC symphonic action type flushing cistern,(ISI Marked) low level with inlet ball valve, float and handle & PVC flush pipe, fixed in position and connecting complete all as specified and directed

S&F PVC connection 15 mm size with PTMT nuts of length 450 mm complete all as specified and directed

S&F chromium plated soap tray any type and fixed to plugs on wall with chromium plated brass screws complete all as specified and directed by Engineer-in-Charge

S&F vitreous china wash basin, white, flat back, size 550 mm x 400 mm fixed on and including cast iron cantilever bracket 32 mm dia brass waste coupling and including waste fitting and union complete all as specified and directed by Engineer-in-Charge

S&F PVC (SWR) pipes 75mm dia single socketed in any length with rubber ring joints laid in trenches or in floors complete all as specified and directed

S & F 75 mm bore of pipe PVC (SWR) bends of any radius fixed to PVC pipes complete all as specified and directed by Engineer-in-Charge

S&F PVC (SWR) pipes 110mm dia single socketed in any length with rubber ring joints fixed on walls including clamp complete all as specified and directed

S&F PVC (SWR) pipes 110mm dia single socketed in any length with rubber ring joints laid in trenches or in floors complete all as specified and directed

S & F 110 mm bore of pipe PVC (SWR) bends of any radius / shoe fixed to PVC pipes complete all as specified and directed by Engineer-in-Charge

S & F 110 mm bore of pipe PVC (SWR) junction single,(Single T) equal or unequal fixed to PVC pipes with access door complete all as specified and directed by Engineer-in-Charge

Demolition of brick / stone / PCC block masonry / RCC Jalli fixed in cement mortar including all quoins, pillars, arches etc. all as specified and as directed.

M&L for providing precast cement concrete (1:3:6) (using 20mm graded stone aggregate) solid building blocks exc 10 cm thick, in width (with plain or inter locking joints as directed) setting in CM 1:6 complete in wall or pillars all as specified and directed.

Demolition of RCC of any descrition such as Kitchen chimniy, chajja, shelves, OHT Tanks,Pilar,wall, column.beam etc and in any position not other wise specially provided for complete all as specified and directed by Engineer in Charge (reinforcement cut as required to facilitate demolition)

M&L Reinforcement cement concrete type B1 1:2:4 using 20mm aggregate as in slab supported on walls beams and columns in floor, roof, landing and in shelves, chajja, lintel /Bands and similar wks incl formwork complete all as specified and directed by Engineer-in-Charge

S&F mild steel TMT bar 10mm dia and over cut to length bent to shape required including cranking bending spirally and binding with and including mild steel wise (annealed) not less than 0.9 mm dia complete all as specified and directed by Engineer-in-Charge

S&F mild steel TMT bar 6mm to 8mm dia and over cut to length bent to shape required including cranking bending spirally and binding with and including mild steel wise (annealed) not less than 0.9 mm dia or as in stirrups complete all as specified and directed by Engineer-in-Charge

S & F framed work as in doors or gates or grills, grating of angle, channel, hollow section or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges; also fastening and fixing confirming to Fe-410- W(Gde-E-250) quality-A complete

Taking down shutter of any description exc 1.00 sqm and n exc 2.00 sqm each and removal from site complete all as specified and directed by Engineer-in-Charge

S&F 30mm thick. flush shutter, solid core construction with particle board core and ply woood face panels commercial type on both side including two coat synthetic enamel paint with one coat of pink primer complete all as specified and directed Engineer-in-Charge.

S&F 100 mm size Butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type C-21 complete all as specified & directed.

S&F 150 mm long aluminium anodized barrel tower bolts of extruded section complete all as specified & directed.

S&F 125 mm in size aluminium handles cast type anodized complete all as specified & directed.

S & F 250 mm mild steel sliding bolt plate type stove enamelled black with bright bolt not less than 12 mm dia with and including a minium of 6 bolts and nuts four on bolt plate and two on stapple plate and fixed complete all as specified and directed by Engineer-in-Charge

S&F 600x600mmx4mm thick false ceiling of Non esbestos fibre cement building boards (E Board) and including GI snap grid frame work of T section (main & cross member) of size 25 mm x 25 mm x 1.5 mm thick in square pattern of grid size 605mm X 605mm . The GI frame work will be supported on side wall with the use of GI 'L' section of size 25 mm x 25 mm x 1.5 angles etc. Snap grid shall be supported with hangers of 4 mm dia. Galvanised iron wire adjusting level fixed to roof slabs / truss etc by means of ceiling cleats made out of Galvanised iron flat of size 40 x 3 mm size 60 mm long and expansion hold fasteners 12.5 mm dia 40 mm long, complete all as specified directed by the Engineer-in-Charge.

S&F 500 ltrs capacity double layer, rotational molded, polythene water storage tank (Cylindrical vertical with closed top) hoisted and fixed on roof in position over existing PCC platform incl all fitting such as connection pieces with GI tank nipple for inlet, outlet, etc complete all as specified and directed

S&F 25mm dia Ball brass valves, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed complete all as specified and directed

S&F aluminium window/ventilators shutters powder coating of any color ( thickness of powder coating not less than 50 micron) fixed type w/o sash bar, aluminium section weighing min. 0.55 Kg/m including necessary joining cleats, glazing clips, rubbers packing, anodised aluminium snap beading, screws etc in repair complete all as specified.directed by Engineer - in - Charge.

S&F sheet glass 3 mm thick ordinary quality(sheet glass is ground or obscured or frosted, on one side) and glazing with oil putty / wooden beads / aluminium glazing clip in square n.exc. 0.5 sqm in each pane complete all as specified & directed.

S&F MS louvers of 80 mm wide & 4 mm thick frosted glass including aluminium louver patti for adjusting the louvers fixed in Aluminium ventilators with screws incl MS wire cloth fixed in outside etc complete all as specified and directed by Engineer-in-Charge

S&F aluminium three track Powder coated of any color ( thickness of powder coating not less than 50 micron) sliding window with three sliding shutter , the size of outer frame three track 92 x 31.5x 1.20mm ( using two track for glazed window shutter and one track for wire gauged ) , the section shutter size 37x 18x 1.2mm)and glazing with 4 mm thick glass ( plain/floated) including all-around suitable rubber gasket and MS wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.4mm and fixed on aluminum flat and inserted in the frame of shutter with tracking arrangement each sliding window shall be provided with one number handle including locking arrangement & 2 numbers’s sliding rollers of nylon with including all necessary fittings complete all as specified and directed by Engineer-in-Charge

M&L for rendering 10 mm thick on brick / concrete surface of walls in cement mortar 1:6 complete all as spd and directed

M &L 2 coats of oil bound distemper on new surfaces of walls including preparation to distempering to match with existing work including 2mm average thick wall putty complete all as specified and directed

M&L for Preparation of old distempered / decorated surfaces of walls include brooming down or steel wire brushing; scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots and applying Two coat of Distemper oil emulsion complete all as specified and as directed by Engr-In-Charge.

Excavating in post holes (or similar holes) in Hard/dense soil each n exc 0.5 cu. m, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm

M&L for providing cement concrete type C-2, 1:3:6 (using 40mm graded aggregate) as in fdn filling and mass concrete etc complete.

S&F for joist,channel, angles or tees with web and flanges cut to shape drilled and counter sunk for screw, including bending and welding angles as necessary, gusset plates, riveting etc. n.exc 10 kg each brackets conforming to FE-290 Gde-E-165 ) complete all as specified and directed by Engineer-in-Charge

S&F Plates (Plain or chequered) channels,squarecut or notched (ordinary and counter sunk) forming holes, w/o any attachment conforming to FE-290( Gde-E-165 ) complete all as specified and directed Engineer-in-Charge

M&L preparation of new steel surfaces and applying two coats of synthetic enamel paint over a coat of red oxide complete all as specified and directed

Dismantling wrought iron or mild steel work of any description not otherwise specifically provided for complete all as specified & directed.

Dismantling of plain or corrugated steel sheeting any gauge, thickness, from roof coverings etc complete all as specified and directed.

S&F Pre- painted galvalume aluminum zinc coating GI based corrugated/plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws incl bending etc complete all as specified and directed

Excavation in trenches exc 1.50 mtr but n.exc 3.00 mtr in dpeth for foundation etc or shafts, wells cesspits, manholes, pier holes etc n.exc 10 sqm on plan and getting out in hard/dense soil all as specified and directed

Returning filling in including spreading, levelling, watering and well ramming in layer n.exc 25cm in layer all as specified and directed

Removing excavated soil to a distance exceeding n.exc 1.50 km and depositing where directed at a level n.exc 1.50 mtr above the starting point complete

Demolition of Concrete of any description and in any position not otherwise specifically provided for all as specified and as directed.

Surface dressing n exc 15 cm deep in Hard/dense soil all as specified and directed

M&L for 75 mm thick Cement concrete type D-2, 1:4:8 (40mm graded aggregate) as in subbase of floor / hard standing/Path ,etc complete all as specified & directed.

M&L for 75 mm thick Cement concrete type B- 2, 1:2:4 (20mm graded aggregate) as in floor / hard standing/Path ,etc complete all as specified & directed.

M&L for Forming construction joints 30mm deep x 10mm wide filled with sealing compound Grade B etc complete all as specified and as directed by Engr-in-Charge.

M&L for Machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness M-35 Grade with grey cement and pigment including laying over 20mm thick sand cushning withcomplete all as specified and as directed by Engr-in-Charge.

Removing old worn out (unserviceable) HDPE bags / gunny bags from stacks filled with sand etc and supply & placing in position new HDPE bags / gunny bags inner laminated layer standard quality, wt. of bag shall not be less than 90 Grams per bag and filled with locally available sand / soil including tying properly & stacking neatly, placing the bag at different heights etc. complete all as specified and as directed.

M&L for filling of wooden saw dust mixed with clean dry fine sand (mixed in the ratio of 1:1 by volume) and filling / spreading where directed at a level upto 8 meters above from the ground level and leveling in the required shape / slope all as directed. Note:- Measurement shall be carried out for net finished volume of work.

Taking down chowkats or frame with shutter of any description (without taking out shutter from the frame) not exceeding 1.50 sqm each and removal from site complete all as specified and directed Engineer-in-Charge

S&F for laminated wooden flooring with AC3 grade 12mm thick as directed on existing surface with flooring planks having click joint system (tongue and groove joint) with joint sealing at floor/skirting including two coat melamine police etc in repair complete all as specified & directed

Dismantling wall and ceiling board (fibre, pulp, insulation, etc.) or insulation boards/slabs/blankets, any thickness, including cover fillets / grid frame wk and assesories etc.

S&F 600x600mm GI snap grid frame work of T section (main & cross member) of size 25 mm x 25 mm x 1.5 mm thick in square pattern of grid size 605mm X 605mm . The GI frame work will be supported on side wall with the use of GI 'L' section of size 25 mm x 25 mm x 1.5 angles etc. Snap grid shall be supported with hangers of 4 mm dia. Galvanised iron wire adjusting level fixed to roof slabs / truss etc by means of ceiling cleats made out of Galvanised iron flat of size 40 x 3 mm size 60 mm long and expansion hold fasteners 12.5 mm dia 40 mm long, complete all as specified directed by the Engineer-in-Charge.

S&F of mineral Fiber Acoustical suspended ceiling sheets with beveled regular edge tiles laid over grid system the tiles should have humidity resistance (RH) of 99% , NRC 0.5, Light reflectance > 87% , Thermal conductivity k=0.052-0.057 w/m K, colour white, fire performance UK class 0/Class 1 (BS 476 pt -6 &7) inmodule size of 600x600x12mm, suitable for green building applicatin, with recycled content of 30% complete all as specified

S& f aluminium powder coating of any color ( thickness of powder coating not less than 50 micron) frame for door,window and ventilators or similar wk with one or more rebate inc joining cleat for fixing in repair complete all as specified and directed by Engineer-in-Charge

S&F aluminium door shutters powder coating of any color ( thickness of powder coating not less than 50 micron), alumimnium section weighing min. 0.55 Kg/m including necessary joining cleats, glazing clips, rubbers packing, handles 2 Nos in each door, hinges, anodised aluminium snap beading, screws etc in repair complete all as specified.directed by Engineer - in - Charge.

S&F 12 mm prelaminated particle board, interior grade, prelaminated both sides with decorative choice laminations complete all as specified and directed by Engineer-in-Charge

S&F sheet glass 4 mm thick ordinary quality(plain/floated/frosted) and glazing with oil putty / wooden beads / aluminium glazing clip in square n.exc. 0.5 sqm in each pane complete all as specified & directed.

S&F sheet glass 4 mm thick ordinary quality (plain/floated/frosted) and glazing with oil putty / wooden beads / aluminium glazing clip in square exc. 0.5 sqm in each pane complete all as specified & directed.

S&F door closer hydraulically regulated designation No 2, aluminium (Die cast) body, universal type suitable for door shutters of 701 to 850 mm in width and of weight between 36 to 60 Kg fixed & in repair complete all as specified & directed.

S&F Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed in repair

S&F 100 mm size mild steel body Mortise lock, vertical type, with 2 lever, fixed to aluminium door complete.

Supply & Fix 06 mm thick plain, multicavity poly carbonate sheet (coloured) in roof covering, fixed with and including aluminium fillets at joints and aluminium angles at the end, fixed with self drilled screws and standard fittings, fixtures and accessories in repair complete all as specified and as per manufacturer's instructions.

Dismantling wrought iron or mild steel work of any description not otherwise specifically provided for complete all as specified & directed.

S&F Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161- 1979 grade St.-240, in any shape complete all as specified and directed by Engineer-in-Charge

Dismantling water tanks exc 250 ltr and n.exc 500 ltr and removing to store complete all as spd and directed

Taking down carefully any type of point wiring (light / fan / socket or power) along with old conduit/ cassing capping complete including fitting such as switches, ceiling roses, socket, light fittings, regulators etc complete and making good disturbed surfaces of walls, floors and making good disturbed surfaces to the existing surface complete.

Taking down Distribution boxes /AC boxes any type with all its related accessories as directed by Engineer-In-Charge.

Taking down old MCB any type,size with all its related accessories as directed by Engineer-In-Charge.

Taking down and refixing Distribution boxes/tube light/security/flood light of any pacity with all its related accessories as directed by Engineer-In-Charge.

M & L for point wiring complete with 1.5 sqmm single core multistranded copper conductor FRLS, PVC insulated and unsheathed cable 650 /1100 volts grade drawn through & including super deluxe casing caping (not less than 25 mm wide) with all its accessories like bends, tees, suitable module PVC boxes o etc fix on wall or ceiling surfaces all as specified including 1.5 sqmm , FRLS type , copper multistranded cable as earth wire and plastic laminated PVC box with cover plate as specified and directed by Engr -in charge:

a) One light / fan / exhaust fan point controlled by one, one way switch.

c) One 3 pin socket out let 5 Amps on same board with other switches.

c) One 3 pin socket out let 5 Amps on the independent board.

-Ditto- all as per item No 96 about but with 2.5sqmm multistranded copper multistranded conductor FRLS cable with 2.5 sqmm earth wire for one 6 pin socket outlet 15 amps on independent board as specified and directed by Engr -in charge:

S & F switch Piano 5 Amps, flush button type, SP, one way, 230 Volts complete as specified and directed by Engr -in charge:. Make - Leader/Anchor/SSK as approved.

S & F Switch socket combination multipurpose 5 pin 5 Amps, flush type, 230 / 250 Volts complete as specified and directed by Engr -in charge:. Make -Leader/Anchor/SSK

S & F switch socket combination ,6 pin ,15 amps, flush type, multipurpose, 230 / 250 volts complete as specified and directed by Engr -in charge:. Make - Leader/Anchor/SSK as approved.

M&L for Ceiling rose, 3 terminal polycarbonate body 6 Amps, 250 volts AC, including connecting complete as specified and directed by Engr -in charge:.

Supply and fix sheet metal enclosure MCB DB, single pole and neutral, 8 ways double door 240 volts having 200 Amps rated bus bar with balnking plates wherever required and degree of protection I.P 43 -IK 09 with acrylic cover as including all connectionsas directed by engineer in charge

Supply and fix sheet metal enclosure MCB DB, triple pole and neutral, 4 ways double door 415 volts having 200 Amps double door rated bus bar with blanking plates wherever required and degree of protection I.P 43 -IK 09 with acrylic cover as including all connectionsas directed by engineer in charge

Supply and fix MCB single pole 240 volts 6 to 32 Amps (to be fixed as per load requirement) 220V with 'C' curve complete as including all connectionsas directed by engineer in charge

Supply and fix MCB Single pole Neutral 240 volts 40- 63 Amps (to be fixed as per load requirement)220V with 'C' curve complete as including all connectionsas directed by engineer in charge

Supply and fix MCB’s triple pole & neutral, 63 Amps, 415 volts with ‘C’ curve, fixed in sheet metal board complete including connecting.

Supply & Fix energy efficient LED tube light fitting with built in LED & integral LED driver 20 watt, channel housing & diffuser of length 1200 mm (approx) with all accessories, fixing arrangement internally pre-wired, fixed in position & connecting complete all as specified and directed by Engg –in-charge.

Supply and fix industrial type heavy duty wall mounted fan, 3 blade, 600 mm sweep ,1400 RPM mm sweep AC, 240 volts, metal body, 200-250 watt fixed as per manufacturer instruction, connecting with and including 1.5 Sqmm copper conductor, PVC insulated and PVC sheathed three core cable complete. Make :crompton vortex wall fan

Supply and fixing, wall mounting fans 230Volts single phase 450 mm sweep, high performance motor, with Metal/Plastic body, jerk free oscillation, aerodynamically designed & balanced blade including grouting on wall with fastners & provision of 1.0 Sqmm copper conductor of three core flesible cable from fan to connector/ceiling rose complete all as specified and directed. Make -Model No Airboll HS speed of Havells or equivalent Model of Crompton Greaves/Bajaj

S&F LED building security light fitting 35 Watt, system efficiency not less than 100 lumen / Watt, IP66 protection, consisting of high / low voltage cut off, maintenance free isolated Electronic driver circuits, Low THD, PMMA grade high quality Transmittance lens, Epoxy powder coated Die Cast Aluminium housing with weather proof gasket for lamp & driver compartment, Heat resistance toughened glass fitted in cast aluminium housing with SS screws, pipe, bracket on building,

Material and labour replacement for earthing complete with galvanized iron earth plate electrode 600 mm x 600 mm x 6 mm thick buried directly in ground (earth pit not less than 2.25 m deep below normal ground level) with top edge of the plate not less than 1.5 m deep below normal ground connected to galvanized steel wire 4 mm dia by means of bolts nuts check nuts and washer of galvanized steel, watering pipe of 20 mm bore, galvanised iron, light grade, and 15 mm bore galvanised iron light grade for earth wire protection including all excavation earth work in any type of soil, PCC pit in PCC 1:2:4 type B-1 and RCC 1:2:4, type B1 for precast chamber cover 50 mm thick, reinforced with welded steel wire fabric or XPM Jali (weight not less than 4.00 Kg / sqm), with charcoal, salt, funnel complete all as shown in the electrical plate No 3 of SSR part –I and testing on completion.

Please Enable Macros to View BoQ information