ADDN/ALTN TO MARRIED QUARTERS AT AF STN JAMNAGAR

Amount

B/R WORKS

Taking down chowkhats or frame with shutter (without taking off shutter from the frame) area n.exc 1.5 Sqm each, complete all as specified and directed.

Taking down chowkhat or frame with shutter (without taking off shutter from the frame) area exc 1.5 Sqm but n.exc 4 Sqm each, complete all as specified and directed.

Taking down shutters of any description exc 1 Sqm but n.exc. 2 Sqm each complete complete all as specified and directed.

Dismantling of floor, hearth or wall tiling or stone slab laid, bedded & pointed in any mortar including demolition of cement mortar bedding or backing coat, including removal of debries to outside MOD land complete all as specified and directed.

Demolition of cement concrete in ground floor and pavings not exc 15 cm thickness below or above ground level, including removal of debries to outside MOD land complete all as specified and directed.

Demolition of brick / stone / PCC block masonry built in cement mortar including all quoins, pillars, arches etc. including removal of debries out side MD land, complete all as specified and directed.

Demolition of reinforced cement concrete of any description and in any position and( reinforcement not cut in chajja/fins to facilitate demolition) including removal of debries to outside MOD land complete all as specified and directed.

Demolition and breaking up drain pipes 100 mm dia (SGSW, AC or RCC hume pipe Class NP2 laid in trenches and jointed in cement mortar complete all as specified and directed.

Roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust etc. and brushing neat cement slurry with 3.0 kg of cement per sq metre complete all as specified and directed.

M&L 20-25mm thick machine cut kota stone slab flooring, treads etc over and including laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed.

M & L for RCC 1:1.5:3 (Nominal mix) type A1 using 20mm graded aggregates as in Chajjas,and the like complete all as specified and directed.

M & L for mild steel TMT CRS bars of 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders and binding with and including mild steel wire annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed

M & L for mild steel TMT CRS bars of 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed

M&L for Formwork to chullah hoods, chajjas, troughs and similar items including edges flat fair finished surfaces of concrete complete all as specified and directed .

M&L for Formwork to edges of concrete flats, treads, breaks in floors, window cills, concrete railings, openings in concrete walls, floor and roofs n.exc 20cm wide and sides of RCC/PCC bands in walls, horizontal or sloping and similar work exc 5cm but n.exc 10cm wide complete all as specified and directed .

M&L for 75 mm thick plain cement concrete 1:3:6, type C2, using 40 mm graded stone aggregate as in plinth protection surfaces finished even and smooth without using extra cement complete all as specified and directed.

M& L for forming 6 mm wide and 10 mm deep joints in PCC and joints filed with bituminious mastic (1 part of bitumen and 2 part of sand )in plinth protection complete all as specified and directed.

M&L for Pre-cast cement concrete block of 1:3:6 type C1 (20mm graded aggregate) block masonry with solid blocks, exc. 10 cm in width and built in cement mortar 1:6 complete all as specified and directed.

M&L for Providing precast cement concrete 1:3:6 type C1 (20mm graded aggregate) solid building blocks or slabs 10cm thick (with plain or interlocking joints as directed) setting in mortar, complete, in walls in half brick thickwalls built in cm 1:4 complete all as specified and directed.

S&F GI Pressed steel powder coated door frame single rebate 105 x 60x 1.6mm , each frame shall consists of 04 x Nos S/S 304 Hinges, 25x25x100mm long, 3mm thick with ball bearing , 06 x Nos Holdfast 200mm x 40mm x 2mm welded to frame ,02 x Nos GI angle tie 20x20x1.60mm and hinges screwed with flat iron 30 x 6 x 120mm long mortar guards and filled with PCC complete all as specified and directed as per Drg No CEAG/AR/TD/12 sheet of 01/03 to 03/03.

S&F GI Pressed steel powder coated door frame double rebate 125 x 60x 1.6mm, each frame shall consists of 08 x Nos S/S 304 Hinges, 25x25x100mm long, 3mm thick with ball bearing , 06 x Nos Holdfast 200mm x 40mm x 2mm welded to frame ,02 x Nos GI angle tie 20x20x1.60mm and hinges screwed with flat iron 30 x 6 x 120mm long mortar guards and filled with PCC complete all as specified and directed as per Drg No CEAG/AR/TD/12 sheet of 01/03 to 03/03.

S&F Factory made solid UPVC wardrobe with frame profile size 71mm x 45mm with MS stiffner and rubber gasket shall be fixed to wall as per manufacturing instructions and UPVC solid shutters with 6mm thick high pressure compact laminate sheet fixing horizontal & verticle style size 71mm x 28mm thick and MS pipe frame as stiffener size 39mm x 18mm x 1mm with rubber gasket and UPVC solid overlap 'L' profile size 16mm x 08mm including all necessary stainless steel hardware fittings (Handles, Self closing hinges, lock, Magnetic catcher ) complete all as specified and directed as per Drg No CEAG/AR/TD/09R sheet of 01/03 to 03/03.

S&F Factory made solid UPVC Kitchen cabinet carecase is made of 35mm thick sandwich panel using UPVC profile 35mmx25mm thick incl shelves and 3mm thick high pressure complete laminate (Phenol formaldehyde bonded) sheet on both sides and EPS insulation in between as well as MS pipe frame as stiffener. Front to cabinet shutter is made of UPVC profile 45mmx20mm and 3mm thick high pressure compact laminate (phenol formaldehyde bonded) sheet incl all necessary stainless steel hardware fittings (handles, self closing hinges & magnetic catcher) complete all as specified and directed as per Drg No CEAG/AR/TD/11R sheet of 01/04 to 04/04.

S&F Factory made solid UPVC Kitchen cabinet below cocking platform is made with UPVC solid frame of size 45mm x 20mm shall be fixed to wall as per manufacturing instructions and UPVC solid shutters with 6mm thick high pressure compact laminate sheet fixing horizontal & verticle style size 45mm x 20mm thick including all necessary fittings (Handles, Self closing hinges, Magnetic catcher ) complete all as specified and directed as per Drg No CEAG/AR/TD/11R sheet of 01/04 to 04/04.

S&F Factory made solid UPVC Kitchen shelves made of 35mm thick with profile 35mmx17mm thick and 03mm thick highpressure compact laminate sheet on both sides and EPS insulation in between as well as MS pipe frame as stiffener including all necessary fittings complete all specified and and Drg No CEAG/AR/TD/11R sheet of 01/04 to 04/04.

M&L for factory made flush shutters,35mm thick solid core construction, with block board core and plywood face panels, commercial type on both sides with 12mm thick teak wood lipping/beading all around including 0.90mm thick decorative laminate type 1 on both sides, of surface finish, colour as approved, fixed with approved adhesive as per manufacturer's instructions complete all as per specified and directed by Engineer-in-Charge.

S&F 35 mm thick factory made second class hardwood Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass / gauge, etc., sizes of members of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); fitted to chowkhats complete. complete all as specified and directed.

S&F Stainless steel wire cloth. 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staples to wooden shutters complete all as specified and directed.

Supply and fixing Fiber Glass Reinforced plastic (FRP) Door Frames of cross section 90 mm x 45 mm having single rebate of 32 mm x 15 mm to receive shutter of 30 mm thickness. The laminte shall be moulded with fire resistant grade unsaturated polyester resin and chopped mat. Door frame laminate shall be 2mm thick and shall be filled with suitable wooden block in all the three legs. The frame shall be covered with fiber glass from all sides. M.S. stay shall be provided at the bottom to steady the frame., complete as specified and directed.

Supply and fixing to existing door frames 30 mm thick Glass Fibre Reinforced Plastic (FRP) panelled door shutter of required colour and approved brand and manufacture, made with fire - retardant grade unsaturated polyester resin, moulded to 3 mm thick FRP laminate for forming hollow rails and styles, with wooden frame and suitable blocks of seasoned wood inside at required places for fixing of fittings, cast monolithically with 5 mm thick FRP laminate for panels conforming to IS: 14856, including fixing to frames, complete as specified by the manufacturer and as per directions of Engineer- in-charge.

S&F SS 304 grade hinge 25x25x100mm long 3mm thick with ball bearing fixed to chowkhat complete all as specified and directed.

S&F 200 mm long aluminium anodised barrel tower bolt of extruded sectiion complete all as specified and directed.

S&F 150 mm long aluminium anodised barrel tower bolt of extruded sectiion complete all as specified and directed.

S&F 150 mm long aluminium handle, fabricated type, anodised complete all as specified and directed.

S&F 100 mm long aluminium handle, fabricated type, anodised complete all as specified and directed.

S&F 300 mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed.

S&F 300 mm, size mild steel ordinary rat tail rod pattern springs including roller and roller plate complete complete all as specified and directed.

S&F 140 mm long Floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor complete all as specified and directed.

S&F powder coated aluminium (minimum thickness of powder coating 50 micron) work for doors, windows, ventilators and partitions (Fixed portions) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size,including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever requiredincluding cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws, all complete all as specified and directed.

S&F powder coated aluminium(minimum thickness of poweder coating 50 micron) for shutters of doors,windows & and ventilators including providing and fixing hinges/pivotes/handle and making provision for fixing of fitting whereever required including the cost of EPDM rubber/neoprene gasket required(fitting shall be paid separately) with extruded built up standered tubular sectios/ appropriate Z section and other sections of approved make conferming to IS 733 and IS : 1285 , fixing with dash fasteners of required dia and size including necessary filling up the gaps at juctions , ie at top , bottom and sides with required EPDM rubber neoprene gasket,concealed type lock for all three shutter, PVC roller etc . Aluminium sectios shall be smooth , rust free , straight , mitred and jointed mechanically wherever required including cleat angle, aluminium snap beading for glazing/ panelling , C.P. brass stainless steel screws complete all as specified and directed. Note for item No 39 & 40 : (i)Three track aluminium windows : (a) Frame (top & side) section shall be of size 92.00 x 31.75 x 1.50mm (Section No 20831) (b) Frame (bottom) section shall be of size 92.00 x 31.75 x 1.50mm (Section No 20832) (c) Top & Side Members of shutter Section shall be of size 18.00 x 40.00 x 1.55mm (Section No 20738) (d) Shutter Interlock section shall be of size 18.00 x 40.00 x 1.45mm (Section No 20737) (e) Bottom Members of shutter section shall be of size 18.00 x 40.00 x 1.55mm (Section No 20736). (ii) Ventilators : (a) Frame top,bottom & sides shall be of size 100x50x1.50mm (Section No S4859) (b) Frame for wire mesh shall be of size 50x25x1.00mm (section No 14039).Section No given above are of Make Jindal for purpose of estimation of weight of individual section only. Make of aluminium section to be used shall be approved by GE before execution of work.

S&F 5mm figured glass , pin headed type and glazing with oil putty in square n.exc 0.50 m in each pane for windowes/ventlators complete all as specified and directed.

M&L for preparation of new wooden surfaces, exc 10 cm width or girth and applying two coats of synthetic enamel paint over one coat of pink primer complete all as specified and directed.

S&F GI powder coated framed work such as grills gratings etc with ends of bars shouldered and / or riveted or forged into spiked framed guard bars barred iron doors ladders framed blasters walkways railings framework of water tanks and similar work complete all as specified and directed.

S&F in repair Stainless steel curtain rods(SS 304 grade) of 25mm dia complete all as specified and directed.

S&F SS ornamental stainless steel holding brackets /end cap for 25 mm dia curtain rods complete all as specified and directed.

S&F Stainless steel peg set of 5 hooks including chromium plated brass screws and wooden/plastic cleats (Minimum weight 190gms).

Demolition of cement concrete of any description and in any position not otherwise specifically provided for including removal of debries to outside MOD land complete all as specified and directed.

M &L for plain cement concrete type E-2 (1:5:10), using 40 mm graded stone aggregate, for filling sunken portion of toilet and similar work complete all as specified and directed.

M&L for providing water proofing treatment of sunken portion of WCs, bathroom etc. by applying cement slurry mixed with Acrylic based polymer modified cementitious composite compound coating of make as approval in Technical Instruction 5/2003 by adding: (a) 15mm thick rendering CM (1:4) with Liquid water proofing compound 200ml per 50kg bag of cement on floor and wall , finishing the surface even and smooth without using extra cement. The surface shall then be cured and allowed to dry. (Note: Water proofing compound shall be measured and paid separately). (b) First layer of slurry of cement @ 0.488 kg/sqm mixed with Acrylic based polymer modified cementitious composite compound @ 0.253 kg/sqm. This layer will be allowed to air cure for 4 hrs. (c) Second layer of slurry of cement @ 0.242 kg/sqm mixed with Acrylic based polymer modified cementitious composite compound @ 0.126 kg/sqm. This layer will be allowed to air cure for 4 hrs followed with water curing for 48 hrs including complete removal of old treatment to sunken portion etc complete all as specified and directed.

M&L for Non skid,(Joint Free) coloured ceremic tiles 7 to 8 mm thick (Square / rectanguler) polished area of each tile exceeding 0.11 sqm but not exeeding 0.18 sqm as in floors etc laid over and including 15 mm thick screed bed or bedding layer in cement mortar 1:6, set and jointed in neat cement slurry and pointed with coloured cement to match the tiles complete all as specified and directed.

M&L for Non skid,(Joint Free) coloured ceremic tiles 7 to 8 mm thick (Square / rectanguler) polished area of each tile exceeding 0.11 sqm but not exeeding 0.18 sqm as in vertical surface skirting/Dado of walls etc laid over rendering 10 mm thick cement mortar 1:4, set and jointed in neat cement slurry and pointed with coloured cement to match the tiles complete all as specified and directed.

M&L for Non skid, (Joint Free) coloured ceremic tiles 8 to 9 mm thick (Square / rectanguler) polished area of each tile exceeding 0.18 sqm but not exeeding 0.38 sqm as in floors etc laid over and including 15 mm thick screed bed or bedding layer in cement mortar 1:6, set and jointed in neat cement slurry and pointed with coloured cement to match the tiles complete all as specified and directed.

M&L for coloured glazed ceramic(Joint Free) tiles of size 450X 300X 7 mm to 8 mm thick (square / rectangular) thick as in skirting / dado etc laid over and including 10 mm thick backing coat in cement mortar 1:4, set and jointed in neat cement slurry and pointed with coloured cement to match the tiles complete all as specified and directed.

M&L for green Marble work 16-18 mm thick (table rubbed and polished) in steps(Raisers/Thread of steps shall be in one piece of full length), jambs, pillars, window cills, cooking platforms and like set over & incl 15mm thick cement mortar (1:4) including pointing in coloured cement (1:2) using marble dust with admixture of pigment to match with marble shade complete all as specified and directed. Note :-(a) Rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations as directed. (b) Rounding to edges shall be measured and paid seperately

M&L for 18-20 mm thick single piece Granite (of approved colour) work (table rubbed and polished) in steps, jambs, pillars, window- cills, cooking platforms and like in set over & incl 15mm thick cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite. complete all as specified and directed. Note :-(a) Rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations as directed. (b) Rounding to edges shall be measured and paid seperately

M&L 20-25mm thick pre polished machine cut kota stone slab flooring, steps(Thread of steps shall be in one piece of full length) etc over and including 15 mm thick screed bed in CM 1:4, laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including mirror polish rubbing complete all as specified and directed. Note :-(a) Rounding to edges of stone slabs one edge, such as in steps, cooking platform, and threads other similar situations as directed are measured and paid seperately. (b) Forming grooves for treads, straight or winding as directed are inclusive in the quoted rate.

M&L 20-25mm thick pre polished machine cut kota stone slab in riser of steps (Risers of steps shall be in one piece of full length), skirting,dado and pillar laid over and including 10 mm thick plaster in CM 1:4 laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed. Note :-(a) Rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations as directed are measured and paid seperately.

Rounding to edges of stone slabs one edge, such as in steps cooking plateform, and other similar situation complete all as specified and directed.

S&F in repairs 15mm bore bib taps ,fancy type of cast copper alloy chromium plated with capstan handle, screwed down, screwed for CPVC pipe or for brass ferrule complete all as specified and directed.

S&F in repair 15mm size bib tap cast copper alloy chromium plated, with capstan head , screwed down , screwed for CPVC pipe complete complete all as specified and directed.

S&F in repair 15mm bore dia stop valve/angle valve cast copper alloy chromium plated, fancy type screwed down high pressure with capstan handle, screwed both ends for CPVC pipe or for union complete all as specified and directed.

S&F Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete all as specified.

S&F Toilet paper holder with flat recessed type stainless steel Complete all as specified and directed.

S&F in repair 20mm bore Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for CPVC pipe and fixed complete all as specified and directed

S&F 15mm cold and hot wall mixer brass chromium plated with bend pipe including all accessories complete as directed by Engineer-in-Charge.

S & F in repair 10 Ltr capacity PVC valveless , syphonic action type , flushing cistern low level white with inlet ball valve float and handle including bracket , 32 mm dia pvc flushing pipe complete all as specified and directed.

S& F in repairs brass chromium plated overhead shower 125 mm size with 225 mm arm and flange for 15mm inlet pipe complete complete all as specified and directed.

S&F in repair white vitreous china wash hand basin of size 550 x 400 mm, fixed over & including GI brackets comprising of the following items :- (a) Waste fitting 32 mm dia chromium plated with long screwed shanks and fly nut, flange end, bedded in red lead cement and other end fixed complete. (b) 15 mm size Pillar tap cast copper alloy with capstan head, chromium plated screwed down high pressure with or without lettered hot or cold with long screwed shank and fly nut screwed for iron pipe complete all as specified and directed. (c) 32 mm dia Brass chromium plated bottle traps for wash basins with inlet and outlet screwed for pipe or connections including necessary packing, union and cap and fixed.

S&F 32mm bore dia light grade GI pipe cocealed in wall or laid in floors complete all as specified.

S&F stainless steel kitchen plate rack of size 750mmx600 mmx250mm deep, fabricated with 0.63 mm sheet fixed in position on wall complete all as specified and directed.

S&F sheet glass shelf assembly consisting of 5.5mm thick sheel galss shelf 12cm wide with chromium plated bracket guard and railing 60cm long complete all as specified and directed.

S&F stainless steel soap dish of size160x160x1mm thick fixed to plugs with chromium plated brass screws as complete all as specified and directed.

S&F in repairs white Vitreous china wash down water closet (pedestal pattern) with fixing bolt, with plastic water closet seat, white, closed pattern with flat bottom, and cover with aluminised hinging device, including all connections complete complete all as specified and directed.

S&F in repairs white vitreous china squatting pan ‘ORISSA’ pattern of size 580 mm x 440 mm white with integral foot rests icluding 100 mm dia CI 'P’ trap or S trap including all connection and provision of lime concrete base complete all as specified and as directed.

S&F in repairs brass Chromium plated tubular Towel rail 20 mm dia D type 600mm long bettwen flange fixed with and including Chromium plated brass screws and wooden/plastic cleats complete all as specified and directed.

S & F Stainess steel Towel Ring fixed with and including Chromium plated brass screws complete all as specified and directed

S&F in repairs stainless steel sink, 1.00 mm thick for kitchen, with plug, washers and wastes coupling, including bedding in cement mortar on to draft wall or including fixing cantilever brackets, connecting union to pipe etc, overall size 495 mm x 420 mm, with bowl size 410 mm x 330 mm x 160 mm, complete complete all as specified and directed.

S&F in repair PVC connection 15mm dia and 45 cm long with 2 Nos PTMT nuts, complete all as specified and directed by Engineer in Charge.

S&F 100mm UPVC sanitary connections—short connections pipe of length upto 300 mm complete all as specified and as directed.

Taking down CI/rain water pipes/PVC pipes (any size or pattern) including all fittings, heads, shoes, bends, swan necks, complete all as specified and as directed

S & F 75mm dia UPVC (SWR) pipes,Type B, single socketed, in any length with rubber ring joints, fixed in walls/ factory made pipe supporting system as per manufacturer instruction and as directed. Note : Pipe shall be fixed on wall at an over multi pipe bracket system stack clamp at an alternalte interval of 1m (U bolt with noise absorbing transparent ribbed silicon ribber sleeve of 2mm thickness with set of knurling flange nuts+bracket+ support) confirment with outer dia of pipe fixed at intervals of every meter at a specified distance from the wall for vertical and horizontal lines, which are made of deep draw low carbon hot rolled gauge corrected (HRGC) steel (Material grade IS 1079DD), hot dip galvanising (IS 2629)+ ZNAL (Zinc Aluminium flake) coated with ribbed support and all as per drg No CEAG/AR/TD/08R

S & F 75mm dia UPVC (SWR) pipes,Type B, single socketed, in any length with rubber ring joints, laid in trenches or in floor complete all as specified and as directed.

S & F UPVC SWR 75mm dia bends of any radius complete all as specified and directed

S & F UPVC SWR 75mm dia branch piece, single (Single Y) equal or unequal complete all as specified and directed

S & F UPVC SWR 75mm dia branch piece, Double (double Y) equal or unequal complete all as specified and directed

S & F 110mm dia UPVC (SWR) pipes,Type B, single socketed, in any length with rubber ring joints, fixed in walls/ factory made pipe supporting system as per manufacturer instruction and as directed. Note : Pipe shall be fixed on wall at an over multi pipe bracket system stack clamp at an alternalte interval of 1m (U bolt with noise absorbing transparent ribbed silicon ribber sleeve of 2mm thickness with set of knurling flange nuts+bracket+ support) confirment with outer dia of pipe fixed at intervals of every meter at a specified distance from the wall for vertical and horizontal lines, which are made of deep draw low carbon hot rolled gauge corrected (HRGC) steel (Material grade IS 1079DD), hot dip galvanising (IS 2629)+ ZNAL (Zinc Aluminium flake) coated with ribbed support and all as per drg No CEAG/AR/TD/08R

S & F 110mm dia UPVC (SWR) pipes,Type B, single socketed, in any length with rubber ring joints, laid in trenches or in floor complete all as specified and as directed.

S & F UPVC SWR 110mm dia bends of any radius complete all as specified and directed

S & F UPVC SWR 110mm dia junction single (Single Y) equal or unequal complete all as specified and directed

S & F UPVC SWR 75mm dia branch piece, Single (Single Y) equal or unequal complete all as specified and directed

S&F UPVC (SWR) vent cowl 75 mm dia complete all as specified and directed

S&F UPVC (SWR) vent cowl 110 mm dia complete all as specified and directed

S & F 75mm UPVC nahani trap, plain with grating including jointing with solvent cement complete all as specified and directed.

S & F 75mm UPVC gully trap, plain with grating including jointing with solvent cement complete all as specified and directed.

S&F in repair Stainless Steel 304 Gratings in square type and of size 125mm x 125mm made in two parts for smell and mosquito proofing with double jali complete all specified and directed

S&F 40mm dia low density polyethylene pipes (LDPE) of pressure rating 6 kg/cm2 fixed complete to walls, ceilings or in floors complete all as specified & directed.

Taking down cement plaster in cement or cement lime mortar on brick or stone walls etc. including raking out joints, hacking for key, scrubbing down with water etc, including removal of debries out side MoD land complete all as specified and directed.

M&L for rendering 15 mm thick in two layers Ist layer 10 mm thick and 2nd layer 5 mm thick, final coat shall be mixed with WPC on brick/stone/ PCC block masonry wall surface in cement mortar 1:4, finished even and smooth without using extra cement complete all as specified and directed. Note : Water proofing compound shall be measured and paid for separetly

M&L for rendering 15 mm thick on other than fair faces of brick/stone/ PCC block masonry wall surface in cement mortar 1:4, finished even and smooth without using extra cement complete all as specified and directed.

M&L for rendering 10mm thick on other than fair faces of brick work or concrete surfaces or stone masonry surfaces in cement mortar 1:6, finished even and smooth without using extra cement complete all as specified and directed.

M&L for 5mm thick rendering in cement mortar 1:3 on concrete surface of ceiling, finished even and smooth without using extra cement complete all as specified and directed.

M & L for Preparation of newly plastered surface of wall and applying waterproof cement based putty (Interior grade )@ 1 Kg (undiluted) per sq mtr of average thickness 1mm over the New plastered wall to prepare the surface even and smooth complete and sanding of the putty surface with mechanical wall sander (having mechanical vacuum mechanism) having RPM not less than 1500, sanding pad of 240 grit or above to make the surface free from dust etc and applying two coats of acrylic distemper over with and including a coat of primer using Airless spray technology with max working pressure of 3300 PSI and capable of operating single spray gun with a max material hose length of 30 mtr the spray machine should be of reputed manufacturer with pro guard technology and capability of tracking pressure and paint usage and certified by paint manufacturer and as mentioned in PS and accessories for applying distemper should be able to spray in hard to reach areas and penetration of distemper on the surface scomplete all as specified and directed.

M&L Complete removal of existing treatment on wall/ roof projections incl facia, cornices etc by scrapping with mechanical sander (having mechanical vaccum mechanism) with sanding pad of appropriate grit to make surface clean, free from dust loose paint etc and applying waterproof cement based putty (Interior grade )@ 1 Kg (undiluted) per sq mtr of average thickness 1mm over the Old plastered wall to prepare the surface even and smooth complete and sanding of the putty surface with mechanical wall sander (having mechanical vacuum mechanism) having RPM not less than 1500, sanding pad of 240 grit or above to make the surface free from dust etc and applying two coats of acrylic distemper over with and including a coat of primer using Airless spray technology with max working pressure of 3300 PSI and capable of operating single spray gun with a max material hose length of 30 mtr the spray machine should be of reputed manufacturer with pro guard technology and capability of tracking pressure and paint usage and certified by paint manufacturer and as mentioned in PS and accessories for applying distemper should be able to spray in hard to reach areas and penetration of distemper on the surface scomplete all as specified and directed.

Notes for Item No 103 & 104 : (a) Mix the putty powder by adding water as per manufacturer instructions and mix it with putty mixer with the mixing capacity of min 2.5 Kg putty per minute. (b)Apply the first coat the prepared mixer with the help of fully automatic airless spray machine of putty application having flow speed of max 6 ltrs per minutes with a max pressure 3300 PSI (c) Allow 6-8 hrs time to dry the putty surface (d) Masking of window/doors during spray painting using polythine film is included in quoted rate of this item (e) Sanding of surface to be done by mechanical sander with 1500-2700 rpm, with internal dust extraction system for clean environment certified by paint manufacturer. (f) The work pertaining to periodical services and water proofing shall be executed from authorized applicator through manufacturer of which the materials i.e. Paint, Distemper, Putty etc is proposed to be used by the contractor and approved by GE. (e) After completion of painting work contractor shall remove & clear all the droplets/stain of paint left on the floor glasses & joinery, mats etc included in quoted rate. by skilled labour complete all as specified and as directed

M & L for preparation of Newly plastered surface and applying one coat of acrylic water based exterior grade primer @ 0.9 ltr (undiluted/10 sqmtrs) diluted with water 1:1 ratio to be applied with fully automatic airless spray machine of paint application with a flow speed of min 1 ltr per minute having a pressure of 3300 PSI Allow 6-8 hrs to dry the surface and applying two coat water based premium acrylic smooth exterior emulsion of approved colour with silicon additive and color stay Techonology, Excellent Dirt Pick up resistance with low VOC less than 50 gram/litre as per the LEEDS specifications, Anti Algal properties in two coats @ 1.79 ltr (Undiluted)/10 Sqm with water as per manufacturer instructions applied over priming coat with fully automatic airless spray machine of paint application with a flow spreed of min 1 ltr per minute having a pressure of 3300 PSI Allow 6-8 hrs to dry the surface in both coats of paint complete all as specified and directed. Note : (a) The work pertaining to periodical services and water proofing shall be executed from authorized applicator through manufacturer of which the materials i.e. Paint, Distemper, Putty etc is proposed to be used by the contractor and approved by GE. (b) Cost of Scafolding upto 10 mtr height of building is included in this item.

M&L for preparation of new plastered surfaces of ceiling and applying three coats of white wash complete all as specified and directed.

M&L for preparation of old decorated surfaces of ceiling (plastered or unplastered) by brooming down , scrapping down smoke soot, moss and efflorescent salts and trading oil and greasy spots etc and applying two coat of white wash on ceiling complete all as specified and directed.

M&L Complete removal of existing treatment on wall/ roof projections incl facia, cornices etc by scrapping with mechanical sander (having mechanical vaccum mechanism) with sanding pad of appropriate grit to make surface clean, free from dust loose paint etc and levelling/edging the disturbed places/edges using necessary filling compound of Wall care Putty to obtain smooth regular/even finish using sand paper and applying one coat of acrylic water based exterior grade primer @ 0.9 ltr (undiluted/10 sqmtrs) diluted with water 1:1 ratio to be applied with fully automatic airless spray machine of paint application with a flow speed of min 1 ltr per minute having a pressure of 3300 PSI Allow 6-8 hrs to dry the surface and applying two coat water based premium acrylic smooth exterior emulsion of approved colour with silicon additive and color stay Techonology, Excellent Dirt Pick up resistance with low VOC less than 50 gram/litre as per the LEEDS specifications, Anti Algal properties in two coats @ 1.79 ltr (Undiluted)/10 Sqm with water as per manufacturer instructions applied over priming coat with fully automatic airless spray machine of paint application with a flow spreed of min 1 ltr per minute having a pressure of 3300 PSI Allow 6-8 hrs to dry the surface in both coats of paint complete all as specified and directed. Note : (a) The work pertaining to periodical services and water proofing shall be executed from authorized applicator through manufacturer of which the materials i.e. Paint, Distemper, Putty etc is proposed to be used by the contractor and approved by GE. (b) Cost of Scafolding upto 10 mtr height of building is included in this item.

Supply only Liquid water proofing compound complete all as specified and directed by Engineer-in-charge.

M&L for repairing the edge/corner of chajja/roof projection and similar work by removing of plastered width/girth exceeding 15cm & n.exc 30cm and making good with 15mm rendering in cement mortar 1:3 to match, including chicken wiremesh netting on exisiting surfaces including necessary form work complete all as specified. (Note- Height of building upto 15mtr)

M&L for Providing, cement concrete 1:2:4 type B0 (using 12.5mm graded stone aggregate) in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs , water troughs and the like including weathering, slightly rounded or chamfered angles and throating, as directed.

M&L for plain cement concrete 1:2:4 type B0 using 12.5 mm graded stone aggregate, in roof for padding to achieve the required slope complete all as specified and directed.

M&L for 10mm thick rendering on concrete surface in CM 1:3 to be finished even and smooth with out using extra cement mixed with water proofing compound as per manufacturer instructions complete all as specified and directed. Note:- WPC will be measured & paid separately.

Material and labour for water proofing treatment by applying one coat of oil base bituminous primer @ 0.3 Kg/Sqm with brush / roller, laying of 3 mm thick APP based polymer modified membrane with non-woven polyester reinforcement/mat (center core), weight not less than 3.50 Kg/Sqm and sealing all the over laps 100 mm in length side and 100 mm in width side of membranes laid with torch application, including preparation and applying two coats of Heat resisting Aluminium paint over APP Membrane complete all as specified and directed. Note : (a) Work shall be carried out upto 2 & 3 storey bldg, contractor to quote rates accordingly. (b) The membrane shall be taken upto height of minimum 300mm through a concrete fillet 75mmx75mm and shall be inserted inside a groove cut in the parapet and fixed. If the height of parapet is 300 mm or less, membrane shall be taken till top of the parapet and finished after covering the top surface of the parapet. For RCC inverted beam, the whole beam shall be covered with membrane irrespective of the depth. In case of roof projection the membrane shall be taken upto the roof edge and sealed by torch application.

Supply and provisioning high performance, general purpose, non shrink, cementious repair micro concrete as per manufacturers instructions to an average thickness of 40 to 70 mm for beam and column, fluid micro concrete shall be mixed with 6 mm down coarse stone aggregate and specified quantity of water and fixed using a power including the cost of all materials, rent of tools, scaffolding and labour charges complete all as specified and directed.

M&L chipping / dismantling of loose damaged concrete removed carefully by using mechanical concrete upto good parent concrete to expose the existing reinforcement (direct hammering should be avoided) average thickness of chipping average 40 -70 mm alround lintel / beams / column upto 10 mtr height including scffolding complete all as specified and directed

Supplying and application of rust remover/converter over the corroded reinforcement bar where ever/Polymer modified mortar micro concreting is required and cleaning the same after application incl cost of all materials, rent of tools, scaffolding, cost of brushes etc. upto 10 mtr height complete all as specified and directed.

M & L for grouting of all RCC structure as per manufcature instructions with low viscosity epoxy resin system compising of resin and hardner by using specialized injection instrument injected through nipples including drilling necessary holes of required size at distance of approx. between 150mm to 300mm and fixing of PVC Nozzles by quick setting ready made epoxy based plugging putty, scaffolding and pressure of injection may vary from 4 kg/cm2 to 7 kg/cm2 to RCC beams/chajjas/slabs/columns at all heights all as per manufactureres instruction and as directed upto 10 mtr height. NOTES: (i) Payment shall be made as per the weight of epoxy formulation as calculated based on net contained weight of epoxy actually consumed in the work. (ii) The sealed container shall first to be brought to the site and handed over to MES store and thereafter to be used as and when required in the presence of MES executive. (iii) Record of day to day consumption with location and date etc shall be maintained in the serially numbered certified bounded register with shall be signed by contractor and Enggr-in-Charge. (iv) The quoted rate is deemed to include the cost for sealing of cracks required for grouting purpose.

Supplying and application of epoxy resin concrete bonding agent as per manufacturers instructions over the old concrete surfaces including the cost of all materials, rent of tools, scaffolding, cost of paint, brush etc. upto 10 mtr height complete all as specified and directed.

M/L for rendering 20 mm thick polymer modified mortar over face of Concrete of column/Beams etc. for height upto 10 mtr in CM mortar 1: 3 along with adding modified styrene butadiene rubber emulsion as per manfactueres instruction and finishing even and smooth. (Modified styrene butadiene rubber emulsion will be measured and Paid seperately) ( Cost of scafflding upto 10 mtr height shall be deemed to be included in the quoted rates) complete all as specified and directed.

M&L for providing and injecting chemical emulsion for Post constructional antitermite treatment along the external wall below concrete or masonry apron using chemical emulsion @ 2.25litres per linear metre including drilling and plugging holes etc in apron complete all as specified and directed.

M&L Treatment of soil under existing floors using emulsion @ one litre per hole, 300mm apart including drilling and plugging 12mm dia holes with cement mortar 1:2 (1 cement: 2 coarse sand) to match the existing floors.

S&F 5.5mm thick tinted Float glass , ordinary quality and glazing in square n. exc 0.50 m in each pane for windowes/ventlators complete all as specified and directed.

Supply only modified styrene butadiene rubber emulsion complete all as specified and directed.

Use & Waste of formwork to sides of pillars, posts, struts, piers, columns and stanchions for fair finished surfaces complete all as specified and directed.

Demolition /dismantling of old APP membrane in roof treatment and rubish off premises complete all as specified and directed. .

Writing letters or figures (block Roman, Italic or Indian) nexc 30cm high shall be painted thick paint, so that they stand out boldly and solidly without showing signs of brush marks, if necessary, they shall be repainted until the desired result is obtained complete all as specified and directed

Writing letters Stops, commas, short lines, dashes, hyphens, brackets, etc shall be painted with thick paint, so that they stand out boldly and solidly without showing signs of brush marks, if necessary, they shall be repainted until the desired result is obtained complete all as specified and directed

S&F corner glass self of size 200mm crafted from high quality glass including brass bracket etc. complete all as specified and directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete

Material & Labour for stainless steel (Grade 304) railing made of hollow tubes,channels, plates etc., including welding, grinding, buffing, polishing and making curvature (where ever required) and fitting the same with necessary stainless steel brackets,nuts and bolts complete, including fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of floor or the side of waist slab with suitable arrangement complete all as specified and directed.

Dismantling of Stone slabs and tiles of any description or thickness laid bedded and pointed in any mortar in floors, aprons etc complete

S&F PVC cabinet mirror of size 125mmx450mmx550mm complete all as specified.

M & L for 100 mm thick cement concrete 1:3:6 type C2 (using 40 mm graded stone aggregate) as in sub base of floor complete all as specified and directed.

M&L for Providing and laying 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in footparth, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU uld, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, mpacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer hrough vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand; complete all as specified and directed.

M&L Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including all nacessary excavation and earth work in any type of soil and making drainage opening wherever required complete all as specified and directed.

M&L for Moorum/red bajri filling in floors or paving or below sewage pipe line in trenches, laid in layers nexc 15cm thick, spread , levelled and rammed including watering complete all as specified and directed

Supply, laying and testing of 150mm internal diameter of double wall corrugated (DWC) high density polyethylene pipes (HDPE) and stiffness classes-8(SN-8) with ISI marked (with CML no) with and incl all fittings & jointing material for sewage line and laid in trenches as specified in IS 16098-2013 part 2 complete all as specified and as directed. Note : Bedding of pipe shall not be provide in normal condition and construction methods shall be strictly complied as per clause no A-4 of Annex 'A' of IS 16098 Part-II"

M&L PCC (1:2:4) type B1 using 20 mm graded aggregate for coping and as in benching inside the man holes including necessary formwork complete all as specified and directed.

M&L for precast cement cocrete cover slabs (1:2:4) type B1 (20mm graded agg) set in CM 1:4 complete all as specified and directed.

M&L for PCC (1:3:6) Type C2 using 40 mm graded stone aggregate as in foundation, filling and mass concrete complete all as specified and directed.

M&L for extra for forming fair finished drain or channel 30cm inner girth in cement concrete, using extra cement including forms, moulds, mitred/stopped ends complete all as directed by EIC.

M&L PCC (1:2:4) type B0 using 12.5 mm graded aggregate for coping including necessary formwork complete all as specified and directed.

Material and labour for reinforcement cement concrete pipes, 450mm bore, class NP2, laid and jointed complete with collars all as specified and as directed.

Excavation in trenches, nexc 1.5m wide and nexc 1.5m deep and getting out in hard/dense soil complete all as specified and directed

Returning filling including spreading, levelling, watering and well ramming in layers not exc 25 cm thick soft & loose soil complete all as specified and directed

Removing excavated material (exc1.50Km and n exc 5.00Km) outside defence land and depositing at a level n exc 1.5 m above the starting point complete all as specified and directed.

HOT WATER SUPPLY , INTERNAL & ENTERNAL WATER SUPPLY WORKS (B/R & E/M)

Taking up or down 15 mm bore steel tubing and connections, complete all as specified and as directed

Taking up or down 20 mm bore steel tubing and connections, complete all as specified and as directed

Taking up or down 25 mm bore steel tubing and connections, complete all as specified and as directed

Taking up or down 40 mm bore steel tubing and connections, complete all as specified and as directed

M&L for Cutting chases, of girth not exceeding 10 cm for concealed water tubing or concealed conduit wiring, etc. in stone / brick masonry wall built in cement mortar and making good, disturbed surface in Cement mortar 1:3 complete.

Supply and fixing 15mm bore dia CPVC pipes SDR11 & Brass CPVC SDR11 fittiings (incl elbow, tee, socket, reducer, bends, unions end caps, etc) laying concealed in walls/ceiling or laying in floors jointed with CPVC solvent only complete all as specified and directed.

Supply and fixing 20 mm bore CPVC pipes SDR11 & Brass CPVC SDR11 fittiings (incl elbow, tee, socket, reducer, bends, unions end caps, etc) laying concealed in walls/ceiling or laying in floors jointed with CPVC solvent only complete and connecting to water supply pipe line , pipe shall be fixed on wall over multi pipe bracket system stack clamp as per drg No CEAG/AR/TD/08R complete all as specified and directed.

Supply and fixing 25 mm bore CPVC pipes SDR11 & Brass CPVC SDR11 fittiings (incl elbow, tee, socket, reducer, bends, unions end caps, etc) laying concealed in walls/ceiling or laying in floors jointed with CPVC solvent only and connecting to water supply pipe line pipe shall be fixed on wall over multi pipe bracket system stack clamp as per drg No CEAG/AR/TD/08Rcomplete all as specified and directed.

Supply and fixing 40 mm bore CPVC pipes SDR11 & Brass CPVC SDR11 fittiings (incl elbow, tee, socket, reducer, bends, unions end caps, etc) laying concealed in walls/ceiling or laying in floors jointed with CPVC solvent only and connecting to water supply pipe line pipe shall be fixed on wall over multi pipe bracket system stack clamp as per drg No CEAG/AR/TD/08R complete all as specified and directed.

S&F CPVC 20 mm pipe for water heater outgoing , ISI Marked conforming to IS 1239 Part-I 2004, 20 mm bore with and including all fittings such as bends , elbows, tees, short length , socket, union, check nuts, nipples etc. fixed and laid in trenches/floor/under culvert/road crossing etc including testing complete all as specified and as directed.

Supply and fixing of 20mm dia Gun Metal globe / Gate valve with iron wheel head, screwed both ends for CPVC pipe and fixed complete all as specified and directed.

Supply and fixing of 25mm dia Gun Metal globe / Gate valve with iron wheel head, screwed both ends for CPVC pipe and fixed complete all as specified and directed.

Supply and fixing of 40mm dia Gun Metal globe / Gate valve with iron wheel head, screwed both ends for CPVC pipe and fixed complete all as specified and directed.

Dismantling water tanks of capacity exc 250 and not exc 500 litres removal to store complete all as specified and directed.

Supply and fix 500 litres capacity triple layer (white), rotational molded, polythene water storage tank (Cylindrical vertical with closed top) hoisted and fixed on roof in position, including all fitting such as connection pieces with GI tank nipple for inlet, outlet, washout and overflow etc. complete all as specified and directed.

S&F ball valves high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for CPVC pipe or brass ferrule and fixed 20mm dia complete all as specified and directed.

Supply only solar glass tube suitable for glass tube collector of 58mm dia and 1800mm long complete all as specified and directed

Supply only solar glass tube suitable for glass tube collector of 48mm dia and 1800mm long complete all as specified and directed

Supply and Fixed in Repairs Hot water tank suitable for 100LPD tube collector complete all as specified and directed

Taking down of cold water tank installed for solar water heating system,dismantaling of incoming and outgoing pipe connection ,removal of outgoing pipe line any size and type from cold water tank to solar heating system ,dismantaling of gate valves in outgoing pipe complete all as specified and directed.

Taking down of hot water tank , solar water heating system ETC type,dismantaling of incoming and outgoing pipe connection ,dismantling of pipe line any size and type from solar heating system to hot water tank and hot water tank to gate valve,dismantling of gate valves in outgoing/incoming,certain other accessories connected to solar water heating system complete all as specified and as directed.

Taking down of steel structure associated with solar water heating system complete all as specified and as directed.

M & L for reassembling of solar water heating sysyem ETC type of any capacity complete with and incl refixing cold water tank,hot water tank,steel structure ,outgoing pipe from cold water to solar system,pipe line from solar sysytem to hot water tank along gate valve,NRV and other accessories,pipe line from hot water tank till gate valve and,certain other accessories connected to solar water heating system complete all as specified and as directed. NOTE:-Any material damage during dismantaling shall be replaced and paid under respective items.

Supply and fix solar water heater element 2000 W with thermostat cut off electric water geyser temperature controlling sensorsuitable for 230 V ac complete all as specified and as directed

M & L for distribution board (DB), double door (CRCA sheet) dust and vermin proof SPN 4 way with 100 Amps rated copper busbar, neutral bar, earth bar and cable ties for cable management, reversible door for IP 43 & IP 54, single pole and neutral 250 Volts, flush to wall complete with IP 54 protection complete all as specified and directed.

M&L for MCB single pole & neutral 240 volt C curve 10 KA (32 to63)Amps capacity IP 20 complete all as specified and directed.

M&L Sub main wiring using PVC insulated and unsheathed multi stranded FRLS copper conductor cable using approved colour code as per IS drawing in and incl PVC casing and capping of suitable size with all accessories and making good disturbed surfaces of wall, floor or ceiling with plaster and finishing the surfaces with distemper/white washing/colour washing to match with the existing surface complete as specified and as directed of the following sizes of cables. (a) Using two single core PVC insulated FRLS cable 4 sqmm copper conductor multi stranded and 4.0 sqmm copper conductor insulated cable using as earth wire Note :2 runs of 4sqmm copper cable & 1 run of 2.5sqmm copper cable and one run of casing & caping shall be measured as one unit

INTERNAL ELECTRIC SUPPLY

Taking down carefully (copper/aluminum) unsv point wiring complete of any type (batten/surface conduit or concealed) for light point, fan point, bell point ,socket point or power point including fixture and fitting such as switches , ceiling roses, pendants , regulators , sockets , light fitting etc. removing material to store for keeping in safe custody or for taking credit( credit for above items should be made as per conditions seperately) and making good the disturbed surfaces of wall/floor or ceiling to match with existing surface and finishing the surfaces with distemper/white washing/colour washing as per existing complete all as specified and directed.

Taking down carefully by unscrewing from main switch boards/cut out boxes/MCB DBs / complete sealing the cable end and making good disturbed surface by walls etc complete all as specified and directed.

Taking down carefully by unscrewing from fitting and fixtures such as ceiling fittings,bulk head fittings, tube light fittings , building street light , flood LED lights etc all as specified and directed.

M&L for point wiring using approved colour as per IS, with multi-stranded copper conductor 1.5 Sq.mm (nominal area two single core, PVC insulated and unsheathed FRLSH cable 1100 volts grade ISI-694 marked drawn through in and incl heavy duty, PVC concealed conduit of white/ivory colour incl all accessories after chasing in wall/ceiling etc, heavy duty ISI marked, with GI sunken modular metal boxes 1.2mm thick, 60mm deep with earth dolly duly covered with modular white cover plate wtih frame suitable for modular switches, incl PVC insulated multistranded copper condutor 1.5 Sq.mm (nominal area) single core FRLSH cble as earth continuity conductor to common earth and connecting to earth dolly all as complete all as specified and directed for following : - Note : Quoted rates deems to be included cost of modular plate with frame & sunken modular metal box for mounting switches, sockets & regulators as required at site.

One light / fan point controlled by one switch one way.

One 3 pin 5 Amp switch & socket outlet on same board with other switches.

One 3 pin 5 Amp switch & socket outlet on Independant board.

One bell point controlled by one switch 5 Amps bell push.

One light point controlled by two Nos 5 Amps switch two way

All same as per item ser No 178 here-in-above but wiring using 2.5 sqmm multi-stranded copper conductor, single core, FRLSH, PVC insulated and unsheathed cable, including 2.5 Sq. mm PVC insulated unsheathed multistranded copper conductor single core cable as earth continuity conductor (in green color) connected to common earth dolly for 6 pin, 15/16 Amps socket outlet on independant board complete all as specified and directed.

All same as per item ser No 178 here-in-above but wiring using 4.0 sqmm multi-stranded copper conductor, single core, FRLSH,PVC insulated and unsheathed cable, including 4.0 Sq. mm PVC insulated unsheathed multistranded copper conductor single core cable as earth continuity conductor (in green color) connected to common earth dolly for two pin earth metal clad plug & socket point for AC/Geysers complete all as specified and directed.

S&F Ceiling rose three terminal PVC/polycarbonate isolated body type suitable for AC 230 volt complete all as specified and directed

S&F switch modular single pole one way 6 Amps 230 volt 1 module complete all as specified and directed

S&F switch modular single pole two way 6 Amps 230 volt 1 module complete all as specified and directed

S&F Socket modular 6 Amp 2/3 pin combined two module complete all as specified and directed

S&F switch modular single pole one way 16 Amps 230 volt 1 module complete all as specified and directed

S&F Socket modular 6&16 Amp 2/3 pin combined two module complete all as specified and directed

S&F Bell Push modular single pole one way 6 Amps 230 volt 1 module complete all as specified and directed

S & F Single pole and neutral enclosure with a two pin and earth metal plug and socket complete with one single pole MCB of 5 to 30 amp,240 volt B Curve 20KA,IP 20 flush in wall complete all as specified and as directed

Supply and fix of Bell musical type AC 230 Volts, as directed including connecting complete all as specified and as directed.

S&F energy efficient LED tube light fitting integrated batten type with built in LED Chip & integral LED driver 20 watt, channel housing & diffuser of length 1200 mm (approx.) with all accessories, fixing arrangement internally pre-wired, fixed in position & connecting complete all as specified and directed.

S&F energy efficient LED tube light fitting integrated batten type with built in LED Chip & integral LED driver 10 watt, channel housing & diffuser of length 600 mm (approx.) with all accessories, fixing arrangement internally pre-wired, fixed in position & connecting complete all as specified and directed

S & F bulkhead fitting 10watt made die cast aluminium housing with complete assembly and PC opal diffuser suitable for surface/wall mounted dust and water resistant complete all as specified and as directed .

Taking down carefully (copper/aluminium ) submain wiring complete of any type (batten/surface conduit or concealed ) for socket point or power point complete with all fittings such as swiches sockets pendants etc complete and making good distuebed surface of wall,floor or ceiling with plaster of tiles or roof treatment etc and finishing the surface with distemper white washing/colour washing to match with the existing surface complete all as specified and directed

M&L Sub main wiring using PVC insulated and unsheathed multistranded FRLS copper conductor cable using approved colour code as per IS drawing in and incl 20mm PVC concealed conduit with all accessories and making good disturbed surfaces of wall, floor or ceiling with plaster and finishing the surfaces with distemper/white washing/colour washing to match with the existing surface complete as specified and directed of following sizes of cables.

Using two single core PVC insulated FRLS cable 6 sqmm copper conductor multi stranded and 6.0 sqmm copper conductor insulated cable using as earth wire complete as specified and directed Note : 2 runs of 6 sqmm copper cable & 1 run of 6.0sqmm copper cable in and including 32 mm PVC conduit shall be measured as one unit

Using two single core PVC insulated FRLS cable 4 sqmm copper conductor multi stranded and 4.0 sqmm copper conductor insulated cable using as earth wire complete as specified and directed Note : 2 runs of 4sqmm copper cable & 1 run of 4.0sqmm copper cable in and including 20mm PVC conduit shall be measured as one unit

M & L for distribution board (DB), double door (CRCA sheet) dust and vermin proof SPN 12 way with 100 Amps rated copper busbar, neutral bar, earth bar and cable ties for cable management,reversible door for for IP 43 & IP 54, single pole and neutral 250 Volts, flush to wall complete with IP 54 protection , with blanker if any mcb slot remain empty complete all as specified and directed.

M & L for distribution board (DB), double door type, as per IEC 61439-3 made out of sheet metal enclosure (CRCA sheet) dust and vermin proof MCB DB, TPN 4 way with 150 Amps rated copper busbar, 415 Volts with in built TPN MCB 100 Amps, 10 KA, 01 ,MCCB SPN 32 Amp, 10KA -06Nos, IP 54 protection,,reversible door for IP 43 & IP 54 ,flush mounted to wall complete all as specified and directed. Note : Rates are inclusive for flush(Concealed ) mounted of DB, TPN ,MCB SPN 32Amp and 63Amp / Schnieder (Multi-9).

M&L for RCCB for earth leakage protection double pole ,30ma for 240 volt 25 amp capacity IP 20 complete all as specified and directed

M&L for MCB single pole & neutral 240 volt B curve 10 KA (upto 32)Amps capacity IP 20 complete all as specified and directed

M&L for MCB single pole,5 to 30 Amp 240 volt B curve 10 KA, IP 20 complete all as specified and directed

S&F building security LED Light fitting 35 watt, system efficiency not less than 100 lumen / watt, IP66 protection, consisting of high / low voltage cut off, maintenance free isolated Electronic driver circuits, Low THD, PMMA grade high quality Transmittance lens, Epoxy powder coated Die Cast Aluminium housing with weather proof gasket for lamp & driver compartment, Heat resistance toughened glass fitted in cast aluminium housing with SS screws, fixed on existing bracket & connecting including taking down old light fitting of any description complete all as specified and directed.

Material and Labour for Earthing complete with galvanised steel earth plate electrode 60 cm x 60 cm x 6 mm thick burried directly in ground (earth pit not less than 2.25 mtr deep below ground level) with top edge of the plate not less than 1.5 mtr below normal ground level, connected to galvanised earth lead wire mm as 4.0mm dia by means of bolts nuts check nuts and washers of galvanised iron or steel all as shown in electrical plate no.3 including earth pit in PCC concrete 1:2:4 type B-1,Cast iron cover 10 MM THICK HINGED to CI frame ,excavation and earth work in any type of soil and including protection pipe 15mm dia and water pipe GI tubing 20mm light grade with funnel and wire mesh connected to earthing test point complete all as specified and directed Note:(i)Rates are inclusive of 7.5m long GI earth wire 4.0mm dia (ii)Rates of CI frame,RCC Pit cover,funnel and wire mesh included in the cost of item.

S & F Exhaust fan 300 mm sweep, copper wounded, four blade, metal body, BEE approved/ISI marked, air delivery shall not be less than 230 CFM, mounted in suitable opening arrangement with louvers shutters, suitable for operation on 240 volt, single phase, 50 cycle per second, AC supply and connecting up using flexible cord wire 3 core using PVC flexible conduit from ceiling rose or connector to fan to cover PVC cable including marking of MES number and fixed in position as recommended by manufacturer, including taking down old unsv Exahaust fans and deposited to store yard of E/M section at AF-II complete all as specified and directed.

S & F Exhaust fan 250 mm sweep, copper wounded, four blade, plastic body , BEE approved/ISI marked, air delivery shall not be less than 230 CFM, mounted in suitable opening arrangement with louvers shutters, suitable for operation on 240 volt, single phase, 50 cycle per second, AC supply and connecting up using flexible cord wire 3 core using PVC flexible conduit from ceiling rose or connector to fan to cover PVC cable including marking of MES number and fixed in position as recommended by manufacturer complete all as specified and directed . (Note: Rate quoted for above shall be inclusive for making of hole of suitable dia for fixing of exhaust fan in stone masonary bldg/ aluminium window )

M & L for taking down Ceiling fan of any size and its connection & other accessories connected to ceiling fan deposited to store yard of E/M section at AF-II complete all as specified and as directed.

S & F Energy efficient BLDC Ceiling Fan, 1200mm sweep BEE 5 star rated, AC single phase, 230 volts, 50 Hz,with remote control regulator and connecting up including provision of three core flexible copper wire of size 1.5 sqmm from ceiling rose to ceiling fan complete in all respect and all accessories complete all as specified and directed.

Supply & Fixing 5 star rated electric storage water heater (vertical type) 25 Ltr, 230 V, AC, Single phase power input 2000w, standing loss in kWh 24 (hours) 45°C 0.511 KW h with and including connecting fastners nuts not less than 100 mm with suitable nut, bolt & washers grouted in walls with complete masonary work for proper mounting of Geyser fastning bolts etc as directed as site reqmt and making necessary inlet and outlet water connection brass chromium plated connection pieces with brass hexagonal adopters and washer at both side, suitable for 15 mm dia pipe and 450 mm long.of size 600mm as well as electric connection including testing on load complete all as specified and directed.

M & L for taking down existing electric meter box alongwith meters by disconnecting electric connections and refixing the same after completion of repair work incl connecting the electric connection and making it serviceable complete all as specified and as directed.

NOTE : Amount of credit of Rs 7,67,711.28 for retrieved material is mentioned in SCHEDULE OF CREDIT on Srl Page No 30 & 31 of tender documents in pdf form which will be deducted offline while acceptance of tender.

S t modi (BID ID -3285375)

Nitesh Enterprise (BID ID -3285243)

vijay infraprojects pvt ltd (BID ID -3288981)

RAMDEV CONSTRUCTION CO. (BID ID -3283159)