ACOUSTICAL, STAGE LIGHTING AND SOUND WORK FOR EXISTING GOVERNMENT AUDITORIUM CHAMPAWAT, DISTRICT CHAMPAWAT

PRE LAMINATED WOODEN SLATS PANELING @ 8 FEET FROM FFL SITC of Wooden Slats made out of Agri Bio Board which is Prelaminated 16 mm Thick, acoustic panel size 575mm x 2420 mm, Groove Size 3.2mm at an interval of 28 mm c/c as per acoustic design / Architects approval, The wooden acoustic panels to be backed with black acoustic fleece. All wooden acoustic panels should be should be fixed with headless nail. The color shade of grooved acoustic panelwill be as per Engineer In charge / Architect’s approval. The ‘U’ channel grid of size GI frame work of 48mm GI Studs using 0.55mm thick and stud channels at 610mm x 610mm, 0.5mm thick, fixed with MS angle cleats 1220x610mm centers to wall by using metal fasteners, backed with 24 SWG x 12.5mm GI Chicken Wire Mesh with air gap a minimum of 50mm on back side, as per detailed drawing.– shall be filled with 50 mm thick micron having the density of 1000 gsm to achieve 1.0 NRC value and finally wooden acoustic panel fixed on GI Channel grid as final finish. Makes : CHORD / HIMALAYAN ACOUSTICS / BAUX/Dhwanik/Tranquil/ASI

STRETCHED FABRIC IN UPVC GRIPPER PANELING ABOVE 8 FEET TILL CEILING LVL SITC of Acoustical Panels on the side walls , GI frame of 48mm GI Studs using 0.55mm thick and stud channels at 610mm x 610mm, 0.5mm thick, fixed with MS angle cleats 1220x610mm centers to wall by using metal fasteners, backed with 24 SWG x 12.5mm GI Chicken Wire Mesh with air gap a minimum of 50mm on back side, as per detailed drawing, framework to be filled with 50 mm thick micron having the density of 1000 gsm to achieve the 1.0 NRC value Cover with Black FRP Tissue on the outer side, and chicken wire mesh support on the rear side abuting the wall face. Finished in stretched fabric(Response) finish, using UPVC grippers fixed to 12mm thick ply runners. Make Fabric = Response/Nexgen/ MMT/Agri Bio Panels - Strawcture /Merino /Century /Kit Play G.I = Custom. Makes : CHORD / Dhwanik/ HIMALAYAN ACOUSTICS / BAUX

POLYESTER FIBER BOARD PANELING ABOVE 8 FEET TILL CEILING LVL SITC of poleyster fiber board paneling on the side walls, GI frame work of 48mm GI Studs using 0.5mm thick and stud channels at 610mm x 610mm, 0.5mm thick, fixed with MS angle cleats 1220x610mm centers to wall by using metal fasteners, backed with 24 SWG x 12.5mm GI Chicken Wire Mesh with air gap a minimum of 50mm on back side, as per detailed drawing. The frame work to be filled with 50 mm thick micron having the density of 1000 gsm to o achieve the 1.0 NRC Cover with 9 MM polyester fiber board on 11mm Agri Bio Panels - Strawcture on f.i frame. Make : Dhwanik/ Tranquil/ HIMALAYAN ACOUSTICS / BAUX/ Nankarrow/ Tacet

OPTRA GRID ACOUTIC TILE (2'X2')SITC of acoustical ceiling consisting of Square Acoustical panels offering a crisp, granulated surface soft fiber acoustic ceiling tile (Acoustika or eq.) in size 600x600x15mm having noise reduction co-efficient of 0.9, Density of 100 kg / m3, and Humidity resistance of 95% to be laid on exposed grid system with white wrap comprising main runner 3.00 mm x 24mm web height cross tee 1.2 mtrs x 24 mm web height and 0.6 mtrs x 24 mm web height. The wall angle shall be 3.0 mtrs. Makes : HIMALAYAN ACOUSTICS / BAUX/ Armstrong Optra/Timber Acoustic/ Glass Wool Ceiling

GYPSUM CEILING BORDER 4 FEET @ CORNER SITC of acoustical false ceiling with Gypsum board of size 1200 x 1800mm, , consisting of GI perimeter channels of size 0.55mm thick (having one flange of 20mm and another flange of 30mm and a web of 27mm) along with perimeter of ceiling, screw fixed to brick wall/ partition with the help of nylon sleeves and screws, at 610mm c/c. Then suspending GI intermediate channels of size 45mm (0.9mm thick with 2 flanges of 15mm each) from the soffit at 1220mm c/c with ceiling angles of width 25mm x 10mm x 0.55mm thick fixed to soffit with GI cleats and steel expansion fasteners. Ceiling section of 0.55mm thickness having knurled web of 51.5mm and two flanges of 26mm each with lips of 10.5mm are then fixed to the intermediate channel with the help of connecting clips and in a direction perpendicular to the intermediate channel at 457mm c/c. 12.5mm tapered egge gypsum board (confirming to IS: 2095-1996: Part-I) is then screw fixed to ceiling section with 25mm drywall screws at 230mm c/c. Screw fixing is done mechanically with drilling machine with suitable attachment. The joints of the panels are to be repaired by jointing compound and finishing with 2 or more coats of acrylic emulsion paint. Makes : CHORD / HIMALAYAN ACOUSTICS / BAUX

SITC of stage side walls, GI frame work of 48mm GI Studs using 0.5mm thick and stud channels at 610mm x 610mm, 0.5mm thick, fixed with MS angle cleats 1220x610mm centers to wall by using metal fasteners, backed with 24 SWG x 12.5mm GI Chicken Wire Mesh with air gap a minimum of 50mm on back side, as per detailed drawing. The frame work to be filled with 50 mm thick micron having the density of 1000 gsm to o achieve the 1.0 NRC Cover with 9 MM polyester fiber board on 11mm Agri Bio Panels - Strawcture on f.i frame. Makes : Dhwanik/ Tranquil/ CHORD / HIMALAYAN ACOUSTICS / BAUX

SITC of M S structure & fixing of 12mm ply & final finish with laminate. L- angle (40 x 40 x 5) will fixed outside the procenium, then will make frame 600 x 600 c to c with MS angle ( 50 x 25 x 5 ) at center then 12 mm ply will nailed on the MS frame 1 mm thick laminate will be paste on 12 mm ply with the help of fevicol as final finish. Make= MS PIPE Apollo /TATA/ Jindal , PLY = Merino/Century/Kit Play

SITC of Stage false ceiling of 9 mm acoustic fiber sheet of size1200 x 600 mm laid over MS Suspension Grid consisting of 2 nos 40 X 40X 5mm MS Angles, welded back to back @1200mm c/c & M.S. Tees @ 600mm c/c . Makes : CHORD / HIMALAYAN ACOUSTICS / BAUX

Hall flooring - CARPET Providing and fixing 22 oz. loop pile carpet with precision tufted loop piles and underlay of 6mm thick PU foam fixed to existing levelled floor with synthetic adhesives as approved by the manufacturer. Makes : URBAN / UNITEK/ SHIVALIK

STAGE FLOORING Providing and fixing of 95x20 mm second class Teak wood klin seasoned planks with tongue & groove joints. Teak wood planks to be of minimum length 450mm. The Teak wood planks to be fixed over a layer of 12 mm commercial ply of approved make fixed to Sal wood frame work of 50 x50 mm and 50x50 mm at 600 mm centre to centre (HxV). The Sal wood shall be kiln seasoned and chemically treated.The framework to be jointed with mathani cut method. The framework to be filled with 50 mm thick thermal bonded fiberglass of density 24kg/cum. The stage floor to be PU polished with use of orbital sanders to make floor even before polishing. Makes : ROYAL FLOORING / UNITEK/ ROSCO/ Greatmats/ Roase / Indiana Sports Infra/ Silikal

LED PROFILE LIGHTS WITH HOUSING & STEP LIGHTSSITC of Step Light With UP & Down Throw Without Seat Number (Warm white) Makes : Philips/ Havels/ TDH/ Syska/ CANARA/MSS

SITC of 12 V Power Supply Adaptor 32 Amp. Makes : Anker/ Belkin/ TDH/ CANARA/ MSS

SITC of Step Light With UP & Down Throw Without Seat Number (Warm white) Make = Illumination India/Nirvana/CANARA/ MSS

SITC of 12 V Power Supply Adaptor 32 Amp. Make = Illumination India/Nirvana/Eq.

ACOUSTIC DOOR Fabricating and fixing on site 50mm thk acoustic sound reducing doors made with 2nd class Wooden framework, infill in 24 kg/ cum density resin bonded glasswool with 12mm commercial ply and 1mm thick laminate on both sides . Cost includes Sal wood Chowkhat (section size : 5" x 3") fixing acoustical seals ,stainless steel ball bearing hinges,door closers, door stoppers and s/steel handles. Makes : TDH /CHORD / HIMALAYAN ACOUSTICS

STAGE FURNISHING P/f of Main Curtain made out of Velvet fabric of 300 to 400 GSM with horizontal sliding arrangement & Motorised operation complete with runners, master runners, pullies, 3 mm steel wire rope, 1 HP motor(Crompton) 2 nos. air breaker contactors (L&T/SIEMENS), 2NOS. micro switches for auto stop, 3 nos. push buttons for forward, reverse and stop positions. The curtain should be draped to half area when in closed position. Minimum overlap at centre should be 900 mm and should be stitched in double gathering with backing fabric. I/c frill as per requirement. Make : TDH / LEKSA/ CANARA/MSS

P/f Rear Curtain made out of black colour Satin fabric with horizontal sliding arrangement & Motorised operation complete with runners, master runners, pullies, 3 mm steel wire rope, 1 HP motor(Crompton) 2 nos. air breaker contactors (L&T/SIEMENS), 2NOS. micro switches for auto stop, 3 nos. push buttons for forward, reverse and stop positions. The curtain should be draped to half area when in closed position. Minimum overlap at centre should be 900 mm and should be stitched in double gathering. I/c frill as per requirement. Make : TDH / LEKSA/ CANARA/ MSS

Providing and fixing Frill bars, fixed type made out of 25mm dia GI pipe, supported from ceiling structure, As required, Frill to be made out of Black Glazed Cotton Cloth, stitched with pleats,Frills, etc., as required. Make : TDH / LEKSA/ CANARA/ MSS

Providing and Fixing of suitable size Stage Wing panel made out from 25mm x 50mm of 16swg MS pipe duly painted in black colour with black glazed casement cloth both side having manual moving facility. Make : TDH / LEKSA/ CANARA/ MSS

Providing & fixing of suitable size Cyclorama screen frame made out from 32mm 16swg tubluar pipe for inner/outer frame & 50mm dia black pipe for back support duly painted in black colour with Beta white PVC perforated screen to be fixed on frame with support of cotton rope wire. Make : TDH / LEKSA/ CANARA/ MSS

SOUND REINFORCEMENT SYSTEMSITC FOH Line Array Speaker (Powered) : Dual 6.5-inch Powered Line Array Loudspeaker, Built-in, passively cooled Class D amplification with a universal power supply, Dual Ethernet ports with Neutrik etherCON connectors, Frequency Range (-10dB) 63 Hz-17 kHz (array preset), Coverage Pattern 120 degrees nominal (500 Hz-16 kHz), Maximum SPL 134 dB, System Type Line Array, two-way active, Amplifier Design Class-D, Continuous Power Rating 600 Watts | LF: 400 Watts | HF: 200 Watts. Make : Bose/ Harman Group / Martin Audio

SITC Powered Subwoofer, 18-inch Powered Subwoofer, Frequency Range (-10dB) 35 Hz-90 Hz (Preset: 80 Hz), Coverage Pattern Omnidirectional or Cardioid, Maximum SPL 134 dB (Preset: 80 Hz), System Type Active Subwoofer , Amplifier Design Class-D, Continous Power Rating 1,100 Watts. Make : Bose/ Harman Group / Martin Audio

Array Frame for Above line array loudspeaker, (1) Spreader Bar, (1) Extension Bar, (1) 1/2-inch Shackle, (1) Laser Bracket and Hardware. Make : Bose/ Harman Group / Martin Audio

SITC Monitor Speaker : 12-inch Powered PA Speaker with Bluetooth, Power: 1,300W Peak / 650W RMS, Frequency response: 50 Hz–20 kHz (-10 dB); 60 Hz–20 kHz (-3 dB), Max SPL: 127 dB, Dispersion: 100° H x 60° V, Audio I/Os: 2 XLR Combo, 1 XLR passthrough, Advanced dbx DSP: Automatic Feedback Suppression, ducking, 100ms speaker delay, parametric EQ, Built-in 3-channel digital mixer, Backlit color LCD screen provides easy access to functions, Bluetooth 5.0 streaming and control. Make : Bose/ Harman Group / Martin Audio

Mixing Console : 32-Channel Premium Mixing Console, 24 Mic Inputs with 48V Phantom Power and HPF per Channel, 32 Line Inputs (24 mono and 4 stereo), 6 AUX Sends + 2 FX Sends, 4 GROUP Buses + ST Bus, 2 Matrix out, 1 Mono out. Make : Yamaha / Harman Group / Allen & Heath

Loudspeaker Management System: Feedback Elimination,2.7 Seconds of Alignment and Zone Delay,RS-232 PC GUI control, Classic dbx Compression and Limiting, Graphic and Parametric EQ, Auto-EQ Function, Full Bandpass, Crossover, and Routing Configurations, Auto Gain Control, Pink Noise Generator and fulltime RTA, Setup Wizard with JBL speaker and Crown Power Amplifier Tunings. Make : Bose/ Harman Group / Martin Audio

Wireless Handheld Microphone : Wireless Vocal System combines professional-quality sound with simple setup and up to 14 hours battery life for legendary audio performance right out of the box. The system includes tabletop single-channel receiver, legendary handheld transmitter, microphone clip, power supply, 2 AA batteries, and user guide. Make : Sennheiser / Shure/ AKG

Wireless Collar Microphone : Wireless Presenter System combines professional-quality sound with simple setup and and up to 14 hours battery life for great audio performance right out of the box. The system includes tabletop single-channel receiver, CVL lavalier microphone with bodypack transmitter, lavalier clip, power supply, 2 AA batteries, windscreens, and user guide. Make : Sennheiser / Shure/ AKG

Gooseneck Microphone :18” (45.7 cm) Gooseneck Microphone with inline preamp,Cardioid polar pattern with tailored response for speech,Dual-section gooseneck enables ease of positioning and placement options with Base. Make : Sennheiser / Shure/ AKG

Dynamic Vocal Microphone :Frequency response tailored for vocals, with brightened midrange and bass rolloff, Uniform cardioid pickup pattern isolates the main sound source and minimizes background noise, Frequency response: 50 to 15,000 Hz. Make : Sennheiser / Shure/ AKG

Dynamic Instrument Microphone : Cardioid dynamic instrument microphone offers clean reproduction of amplified and acoustic instruments., Frequency response: 40 to 15,000 Hz. Make : Sennheiser / Shure/ AKG

Supply of Digital Podium, with inbuilt 19" interactive panel with motorized tilting of panel, top connection panel with connectivities such as power for external laptop, VGA input, vga swicther for toggling between visualizer, cpu and external laptop, usb ports for connecting external pen drive directly to the cpu, with builtin CPU. Make : Aero / Globus / Swastik

Supply of Floor mount box for microphone connectivity (2 x XLR in). Make : Customized

Supply of Floor mount box for Monitor Speaker (1 xXLR) . Make : Customized

Supply of 19 U Equipment Rack, with locking facility, doors, fan, power strip. Make :MTS /Coral/ Valrack

Supply of Two Core Speaker Cable - 1.5 Sqmm in PVC conduits. Make : Falcon / Clouds / Crystal

Supply of Two Core Shileded Microphone Cable in PVC conduits. Make : Falcon / Clouds / Crystal

Supply of 8 Core Microphone snake cable Shielded in PVC conduits. Make : Falcon / Clouds / Crystal

Supply of Various Connectors and Patch cables. Make : Falcon / Clouds / Crystal

Supply of Floor Standing Mic Stand Tripod Type. Make : Bespeco /Hawk/ Ahuja

Supply of Desk/Table Standing Mic Stand. Tripod Type Make : Bespeco /Hawk/ Ahuja

SITC of Laser Projector with standard Lens : White Brightness : 6,400 ANSI Lumens (7,000 lm centre), Resolution : 1920x1200, Aspect Ratio : 16:10 (WUXGA), Display Type :2 cm 3LCD Chips, Lamp Type : Laser Phosphor, Video Modes : 720p, 1080i, 1080p/60, 1080p/50, 576i, 576p, 3840p/24, 4096p/24, 480p, 480i, Data Modes : MAX 1920x1200, Included Lens : 1.6x manual zoom , manual focus. Lens Shift : Horizontal +/-15% & Vertical +35% / -55%, Throw Distance : 1.7 m - 8.0 m, Image Size : 102 cm - 763 cm , Throw Ratio : 1.23:1 - 1.97:1 (D:W), Projector Size : 13 cm x 42 cm x 34 cm (HxWxD), Internal Speakers : 16.0 Watts Mono, Power : 463 Watts 100V - 240V , Connection Panel : Audio Out: Mini Jack Composite: RCA, HDBaseT: RJ-45, HDMI x 2, Network: RJ-45, RS232: DB-9pin, USB, VGA In: Dsub-15pin. Makes - Sony/Christie/Vivetek

SITC of 4K@60Hz 4:4:4 Switcher 4 HDMI inputs, 1 HDMI Output with de-embedded analog audio, 2K and 4K support, Min. data rate data rate of 17.82Gbps, HDTV Compatible, HDCP 2.2 & HDR10 Compliant, Automatic Switching, 1 Unbalanced Stereo Audio: On a 3.5mm mini jack, Controllable through contact closure switches, etc complete as required. Makes:Lightware/ Kramer/ Linetek

SITC of HDMI Transmitter over Cat 6 ( HDBaseT) up to 70m with Input 1 HDMI, 1 Cat6 (HDBaseT) Output, 2K and 4K support, HDTV Compatible, HDCP 2.2 Compliant with IR and RS-232, Compliance : CE, ISO 9001, ISO 14001, OHSAS 18001, etc complete as required. Makes:Lightware/ Kramer/ RGB Spectrum

SITC of HDMI Receiver over Cat 6 ( HDBaseT) up to 70m with Inputs 1 Cat6 (HDBaseT), 1 HDMI Output, 2K and 4K support, HDTV Compatible, HDCP 2.2 Compliant with IR and RS-232, Compliance : CE, ISO 9001, ISO 14001, OHSAS 18001, etc complete as required. Makes:Lightware/ Kramer/ Linetek/D LINK

Supply and Laying of HDBaseT recommanded 23 AWG shielded CAT6A Cable with appropriate connectors in existing conduit. Makes:Lightware/ Kramer/ Linetek/ D LINK

HDMI Cable 3 mtr. Makes:Lightware/ Kramer/ Linetek

HDMI Cable 2 mtr Makes:Lightware/ Kramer/ Linetek

Projector mount Make- Custom

Supply and Laying of STP connector for 23 AWG shielded CAT6A Cable. Makes:Lightware/ Kramer/ Linetek/D LINK

Providing & fixing of 15 KVA UPS 1 phase in 1 phase out along with 26 AH battery (Rocket/Amron/Eq. rack and interlink cables with 20-25 min power back UPS Make- APC/Delta/Uniline /BPE

SITC of 3 pin XLR connectors for stage lights

SITC of Chair Description:- Manual Mechanism Push Back Chair. Seat Size - 22” center to center distance ( Arm to Arm ). Chair Height – 41” to 42” from floor. Slid Mechanism Movement - 5” to 6”.Depth of the seat – 445 mm. Metal frames Look – Powder Coated Black Color. Branding – Brand name embroidery on back head. Head – Cushioned Head for extra comfort. Final Finish – As per the requirements. Fabric:- Fabric Backing – 10 mm Lamination. Quality & Color – As per the choice. Polyurethane Foams:- Non sagging polyurethane molded foam of 50 density for seat. Semi-automatic PU M/C with virgin PU chemical. Chemical make - Huntsman / Dow. Density: 50 +/- 5 Kg / M3 as Per JIS K 6401. Thickness: Cushion: 150 + 5 mm. Constant Compression Set : ( Max – 10% ) JIS K 6401. Side Stand:- 3mm HR Plate iron sheet for footrest gripping, 25*25 square pipe & 38*25 mm rectangle pipe for structure. 25X5 mm Patti for armrest.Side aisle Panel – 9 mm plywood covered with 10 mm laminated fabric fixed both side of the side stand along with aisle to give the box look.Middle Panel: 6 mm plywood covered with 10 mm fabric fixed in the middle stand for aesthetic look and also to avoid exposure of the iron structure. Back:- 19X19 mm square pipe, 25 mm x 3 mm Iron flat Patti, 6mm plywood for shape 6mm plywood on iron frame for shaping the back design. Virgin quality polyfill PU with 10 mm laminated fabric Seat & Mechanism:- Back Clamps: 14G HR sheet x 2 Nos. Seat supporting tray: 25X3 mm iron angel.Seat clamps: 16G HR Sheet x 2 Nos. Sliding arms: 25mm x 6mm flats x4Nos. Parallel pipes: 40mm x 25mm x16Gx 2nos. Rollers and rollers holder 14G, & springs. Side grip plate – 16G*2nos. Seat – Molded foam with 10 mm laminated fabric upholstery pasted on 12 mm Spring:- Spring in mechanism - Coil Spring Steel IS : 4454 – 1981 GRADE 2 can be tested for 1,00,000 cycles with replacement guaranty of one year. Roller:- Solid iron 21*30 mm. Roller for sliding mechanism for smooth movement without any noise. Arm Rest: - Cup holder attached PP arm rest with an inserted flap of 25 mm foam & 10 mm laminated fabric upholstery for having comfort and aesthetic look. Grouting Bolts:- 100 mm expansion bolts of dia 14 MM with 8 mm bolt/Pin fastener 12 mm & 100 mm. Make- Acoustika/Godrej/Innovative Seating

LED light Fitting : 35-45 Watts : Type of Lighting : Down Light Type of mounting Fitting : Recessed with electrical wiring & conduiting. Make : Fous Lighting / Bajaj / Havels / THD/ Orient

SITC of 3 pin XLR connectors for stage

SITC of MS powder quoted C clamps for stage lights Make- Basel/PLS/Robe

SITC SWITCHING SYSTEM FOR ABOVE LIGHTS WITH MOBILE CONNECTIVITY ALSO Make- ARRAYSTORM/Iguzzini/Pioneer lighting Make- Raylogic/ ARRAYSTORM/Pioneer lighting

SITC of 40 OD M.S. Pipe to be hang from exiting grid / roof structure

SITC of 40 OD M.S. Pipe to be hang from exiting grid / roof structure

SITIC of 25 x 50 mm MS pipe side ladder bar with MS pipe each side with black paint MS PIPE Apollo /TATA/ Jindal

Please Enable Macros to View BoQ information