Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹18.0 LAccepted-AOC | L1 | Accepted-AOC Acceptance of contract | |
| 2 | L2₹18.6 L+₹39,219 (2.16%)Rejected-AOC 60 B C BAZAR AMBALA CANTT HARYANA 133001 | AMBALA | HARYANA | 133001 | L2 | Rejected-AOC R | |
| 3 | L3₹19.4 L+₹1.2 L (6.61%)Rejected-AOC | L3 | Rejected-AOC R | |
| 4 | L4₹21.9 L+₹3.7 L (20.6%)Rejected-AOC 10 CANNAUGHT PLACE DEHRADUN UK | DEHRADUN | UTTARAKHAND | 248001 | L4 | Rejected-AOC R |
Tender Value
₹28 L
EMD Value
₹56,000
Closing Date
7 Jun 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE IMA DEHRADUN
GE IMA DEHRADUN
REPAIR MAINT OF CHAIR DINING LONG BACK
2022_MES_523298_1
GE/IMA/T-25/2022-23 9203/E8
Open Tender
Support/Maintenance Service
Item Rate
330 days
GE IMA DEHRADUN
Refer NIT
8 documents required · 8 mandatory
₹500
Yes
GE IMA DEHRADUN
₹56,000
Yes
15 Jul 2022
10 May 2022
9 Jun 2022
11 May 2022
7 Jun 2022
24 May 2022
Amount
Repair/Relacement of following U/S parts of "Chair Dining Long Back" with suitable new parts of (teak wood) as per No FD-357 existing shape & size complete to match the original as shown on drg and directed by In-Charge :-
Front legs
Rear legs
Stiffeners
Back straps
Front /side rails
Rubber shoes
S&F new seat made out of 50mm thick 32 density foam, covered with leatherette rexine & marking cloth, not less then Rs.350/- RM (as approved), fitted on 6mm thick ply wood as directed
S&F new back made out of 50mm thick 32 density foam, covered with leatherette rexine & marking cloth, not less then Rs.350/- RM (as approved), fitted on 6mm thick ply wood as directed.
M & L for tightening of complete chair, loose joints shall be done by necessary nails wood corner suitable size shall be required on site as direction by Engr-in-Charge.
M&L for two coats french polishing with high class finishing (after rubbing/scrapping and filling) to complete side as per existing shape and size in drawing as directed by Engr-in- charge.
Repair/Relacement of following U/S parts of "Table 900x900x760mm" with suitable new parts of (teak wood) existing shape & size complete to match the original as shown on drg as per No-FD-291 and directed by In-Charge :-
S&F new top of prelaminated BWP MDF board of 18/19mm thick size as per drg with 4mm thick teak wood half round beading all round of table top as directed.
Legs (740x50x50mm)
Top long rails
Top short rails
M & L for tightening of complete table, loose joints shall be done by necessary nails wood corner suitable size shall be required on site as direction by Engr-in-Charge.
M&L for two coats french polishing with high class finishing (after rubbing/scrapping and filling) to complete side as per existing shape and size in drawing as directed by Engr-in- charge.
Repair/Relacement of following U/S parts of "Chair Easy FD" with suitable new parts of (teak wood) existing shape & size complete to match the original as shown on drg No-FD-229 and directed by Engr-In-Charge :-
Front/Rear legs
Side rails (including holes for caning)
Front/Rear rails (including holes for caning)
Arm/Handles
Stiffeners
Rubber shoes
M & L for tightening of complete chair, loose joints shall be done by necessary nails wood corner suitable size shall be required on site as direction by Engr-in-Charge.
M&L for two coats french polishing with high class finishing (after rubbing/scrapping and filling) to complete side as per existing shape and size in drawing as directed by Engr-in- charge.
Repair/Relacement of following U/S parts of "Chair Easy DC" with suitable new parts of (teak wood) existing shape & size complete to match the original as shown on drg No-DB-3972 and directed by Engr-In-Charge :-
Front legs
Rear legs
Front /back rails (including holes for caning)
Side rails (including holes for caning)
Arm/Handles
Stiffeners
Rubber shoes
M & L for tightening of complete chair, loose joints shall be done by necessary nails wood corner suitable size shall be required on site as direction by Engr-in-Charge.
M&L for two coats french polishing with high class finishing (after rubbing/scrapping and filling) to complete side as per existing shape and size in drawing as directed by Engr-in- charge.
Repair/Relacement of following U/S parts of "Peg Table" with suitable new parts of (teak wood) existing shape & size complete to match the original as shown on drg No FD-277 and directed by Engr-In-Charge :-
S&F new top of prelaminated BWP MDF board of 18/19mm thick size as per drg with 4mm thick teak wood half round beading all round of table top as directed.
Long rails
Short rails
Rubber shoes
M & L for tightening of complete peg table, loose joints shall be done by necessary nails wood corner suitable size shall be required on site as direction by Engr-in-Charge.
M&L for two coats french polishing with high class finishing (after rubbing/scrapping and filling) to complete side as per existing shape and size in drawing as directed by Engr-in- charge.
Repair/Relacement of following U/S parts of "Bed Hard with ply top" with suitable new parts of (teak wood) existing shape & size complete to match the original as shown on drg No-FD-21, FD-246,FD-247 and directed by Engr-In-Charge :-
S&F new head rest made out of teak wood frame of size 900x600 mm including leg and 04 mm thick both side teak face ply & complete teak wood beading shall be provided all over complete as directed.
S&F new foot rest made out of teak wood frame of size 900x450 mm including leg and 04 mm thick both side teak face ply & complete teak wood beading shall be provided all over complete as directed.
S&F new long rail made out of teak wood size1800x90x35mm as per drg and directed by Engr in charge.
S&F new short rail/center stiffner made out of teak wood size 900x90x35mm as per drg and directed by Engr in charge.
S&F new clamps for holding of MNF set as per drg and directed by Engr in charge.
S&F new 12mm thick ply top of size 1800x900mm exterior grade BWP , fitted with suitable nut & bolt and washers on bed hard complete to match the existing shape and size.
M&L for two coats french polishing with high class finishing (after rubbing/scrapping and filling) to complete side as per existing shape and size in drawing as directed by Engr-in- charge.
Repair/Relacement of following U/S parts of "Chair Dining FD" with suitable new parts of (teak wood) existing shape & size complete to match the original as shown on drg No FD-279 and directed by Engr-In-Charge :-
Front legs
Rear legs
Front/ back rails (including holes for caning)
Side rails (including holes for caning)
Stiffeners
Rubber shoes
M & L for tightening of complete chair, loose joints shall be done by necessary nails wood corner suitable size shall be required on site as direction by Engr-in-Charge.
M&L for two coats french polishing with high class finishing (after rubbing/scrapping and filling) to complete side as per existing shape and size in drawing as directed by Engr-in- charge.
Repair/Relacement of following U/S parts of "Chair Writing FD" with suitable new parts of (teak wood) existing shape & size complete to match the original as shown on drg No FD-202, FD-250, FD-280 and directed by Engr-In-Charge :-
Front legs
Rear legs
Front/ back rails (including holes for caning)
Side rails (including holes for caning)
Arm/Handles
Stiffeners
Rubber shoes
M&L for tightening of complete chair, loose joints shall be done by necessary nails wood corner suitable size shall be required on site as direction by Engr-in-Charge.
M&L for two coats french polishing with high class finishing (after rubbing/scrapping and filling) to complete side as per existing shape and size in drawing as directed by Engr-in- charge.
Repair/Relacement of following U/S parts of "Chair Writing SK with cushion" with suitable new parts of (teak wood) existing shape & size complete to match the original as shown on drg No SK-573 and directed by Engr-In-Charge :-
Front legs
Rear legs
Front rails for seat
Side rails for seat
Front rails for back
Side rails for back
Arm/Handles
Stiffeners for seat & back
Back head rest rails
Rubber shoes
M & L for tightening of complete chair, loose joints shall be done by necessary nails wood corner suitable size shall be required on site as direction by Engr-in-Charge.
M&L for two coats french polishing with high class finishing (after rubbing/scrapping and filling) to complete side as per existing shape and size in drawing as directed by Engr-in- charge.
S&F of foam cushion (seat) 40 density with 3" dia with markin cloth duly stitched and velvet cloth cover with TKK chain fixed having cost of cover not less than 300/-per mtrs all as drg and as directed by Engr- in- charge.
Repair/Relacement of following U/S parts of "Stool Dressing" with suitable new parts of (teak wood) existing shape & size complete to match the original as shown on drg No FD-252, FD-282 and directed by Engr-In-Charge :-
Stiffeners
Side rails (including holes for caning)
Rubber shoes
M & L for tightening of complete stool, loose joints shall be done by necessary nails wood corner suitable size shall be required on site as direction by Engr-in-Charge.
M&L for two coats french polishing with high class finishing (after rubbing/scrapping and filling) to complete side as per existing shape and size in drawing as directed by Engr-in- charge.
Repair/Relacement of following U/S parts of "Teapoy Wooden" with suitable new parts of (teak wood) existing shape & size complete to match the original as shown on drg No FD-278, FD-382, FD-232 and directed by Engr-In-Charge :-
S&F new top of prelaminated BWP MDF board of 18/19mm thick size 600x450mm as per drg with 4mm thick teak wood half round beading all round of table top as directed.
Long stiffeners (bottom)
Short stiffeners (bottom)
Rubber shoes
M & L for tightening of complete teapoy, loose joints shall be done by necessary nails wood corner suitable size shall be required on site as direction by Engr-in-Charge.
M&L for two coats french polishing with high class finishing (after rubbing/scrapping and filling) to complete side as per existing shape and size in drawing as directed by Engr-in- charge.
Repair/Relacement of following U/S parts of "Chair Easy with two cushion seat & back" with suitable new parts of (teak wood) existing shape & size complete to match the original as shown on drg SK-574 and directed by Engr-In-Charge :-
Front/rear legs
Front/back rails for seat
Side rails for seat
Front/back rails for back
Side rails for back
Arm/Handles
Stiffeners for seat & back
Rubber shoes
M & L for tightening of complete chair, loose joints shall be done by necessary nails wood corner suitable size shall be required on site as direction by Engr-in-Charge.
S&F new foam cushion seat and back 40 density with 3" dia size 420x460x75mm with markin cloth duly stitched and velvet cloth cover with TKK chain fixed having cost of cover not less than 300/-per mtr as per drg and as directed by Engr- in- charge.
M&L for two coats french polishing with high class finishing (after rubbing/scrapping and filling) to complete side as per existing shape and size in drawing as directed by Engr-in- charge
Repair/Relacement of following U/S parts of "Table 3'x2' w/o drawer and table examination" with suitable new parts of (teak wood) existing shape & size complete to match the original as shown on drg No FD-223,IF(S) and directed by Engr-In-Charge :-
S&F new top of prelaminated BWP MDF board of 18/19mm thick size 900x600mm as per drg with 4mm thick teak wood half round beading all round of table top as directed.
Legs (65x65x760mm)
Top side long rail (65x25x740mm)
Top side short rail (65x25x440mm)
Bottom rail (50x25x440mm)
Rubber shoes
M & L for tightening of complete table, loose joints shall be done by necessary nails wood corner suitable size shall be required on site as direction by Engr-in-Charge.
M&L for two coats french polishing with high class finishing (after rubbing/scrapping and filling) to complete side as per existing shape and size in drawing as directed by Engr-in- charge.
Repair/Relacement of following U/S parts of "Almirah large wooden w/s" with suitable new parts of (teak wood) existing shape & size complete to match the original as shown on drg (TP) and directed by Engr-In-Charge
Both side door of almirahs size 1880x740x25mm
Shelf of almirahs size 1480x450x19mm
MS hinges size 65mm
MS CP haps and staple of size 50mm
M&L for two coats french polishing with high class finishing (after rubbing/scrapping and filling) to complete side as per existing shape and size in drawing as directed by Engr-in- charge.
Repair/Relacement of following U/S parts of "Table Writing Clerk SK with drawer" with suitable new parts of (teak wood) existing shape & size complete to match the original as shown on drg No-SK-571 and directed by Engr-In-Charge :-
S&F new top of prelaminated BWP MDF board of 18/19mm thick size as per drg with 4mm thick teak wood half round beading all round of table top as directed.
Long rails
Short rails
Knobs of approved quality
S&F of new drawers as per drg and directed by Engr-In-Charge.
S&F back of the table made of 6mm thick commercial ply grade BWP type of size 585x400mm complete all as per drg and as directed by Engr-In-Charge.
S&F of new shutter with sliding channel both side of table as per drg and directed by Engr-In-Charge.
M & L for tightening of complete table, loose joints shall be done by necessary nails wood corner suitable size shall be required on site as direction by Engr-in-Charge.
M&L for two coats french polishing with high class finishing (after rubbing/scrapping and filling) to complete side as per existing shape and size in drawing as directed by Engr-in- charge.
Repair/Relacement of following U/S parts of "Chair Dining Special " with suitable new parts of (teak wood) existing shape & size complete to match the original as shown on drg No-PN/F-26 and directed by Engr-In-Charge :-
Front legs
Rear legs
Front / rear rail (including holes for caning)
Side rail (including holes for caning)
Arm/handle
Stiffener
Rubber shoes
M & L for tightening of complete chair, loose joints shall be done by necessary nails wood corner suitable size shall be required on site as direction by Engr-in-Charge.
M&L for two coats french polishing with high class finishing (after rubbing/scrapping and filling) to complete side as per existing shape and size in drawing as directed by Engr-in- charge.
Repair/Relacement of following U/S parts of " Form Without Back " with suitable new parts of (teak wood) existing shape & size complete to match the original as shown on drg No FD-1027 and directed by Engr-In-Charge
S&F new top of first class hard wood teak duly polished and fixed as per drg and directed.
M & L for tightening of complete form without back, loose joints shall be done by necessary nails wood corner suitable size shall be required on site as direction by Engr-in-Charge.
M&L for spray painting of synthetic enamel olive green paint with high class finish to complete side as per existing shape and size in drawing as directed by Engr-in- charge.
Repair/Relacement of following U/S parts of "Hat Stand" with suitable new parts of existing shape & size complete to match the original as shown on drg No FD-223, FD362 and directed by Engr-In-Charge :-
4mm thick teak face decorative plywood fixed with fevicol tipped with teak wood edging all round size 110x710 mm as per drg and as directed by Engr-in-Charge.
Mirror of size 300x480x5mm thick as per drg.
Aluminium Peg set 100 mm with ISI mark
M&L for french polishing with high class finishing (after rubbing/scrapping and filling) to complete side as per existing shape and size in drawing as directed by Engr-in- charge.
Repair/Relacement of following U/S parts of " Sofa Set 4/5 Seater" with suitable new parts of (teak wood) existing shape & size complete to match the original as shown on drg No-FD-258,FD-281,FD-373 and directed by Engr-In-Charge :-
Front legs
Rear legs
Front/rear side long rails
Arm/Handles
Stiffeners long / short
Rubber shoes
M & L for tightening of complete sofa, loose joints shall be done by necessary nails wood corner suitable size shall be required on site as direction by Engr-in-Charge.
M&L for two coats french polishing of sofa set 5 seater with high class finishing (after rubbing/scrapping and filling) to complete side as per existing shape and size in drawing as directed by Engr-in- charge.
M&L for two coats french polishing of sofa set 4 seater with high class finishing (after rubbing/scrapping and filling) to complete side as per existing shape and size in drawing as directed by Engr-in- charge.
Repair/Relacement of following U/S parts of "Table Dining 6 Person" with suitable new parts of (teak wood) existing shape & size complete to match the original as shown on drg No FD-278, FD273 and directed by Engr-In-Charge :-
S&F new top of prelaminated BWP MDF board of 18/19mm thick size as per drg with 4mm thick teak wood half round beading all round of table top as directed.
Legs (60x60x740mm)
Top side long rail (640x100x25mm)
Top side short rail (100x100x25mm)
Stiffener
Rubber shoes
M & L for tightening of complete table, loose joints shall be done by necessary nails wood corner suitable size shall be required on site as direction by Engr-in-Charge.
M&L for two coats french polishing with high class finishing (after rubbing/scrapping and filling) to complete side as per existing shape and size in drawing as directed by Engr-in- charge.
Repair/Relacement of following U/S parts of "Table Dressing Gents" with suitable new parts of existing shape & size complete to match the original as shown on drg No -FD-230, FD-379 and directed by Engr-In-Charge :-
S&F new drawer of prelaminated BWP MDF board of 12mm thick size as per drg with 4mm thick teak wood half round beading as directed.
S&F of knob acrylic of approved quality
S&F of looking mirror of first class quality size 760x380x5mm thick as per drg and directed by Engr-in-Charge.
S&F 6mm thick ply wood grade BWP type for back side of mirror all as directed by Engr-in-Charge
M&L for two coats french polishing with high class finishing (after rubbing/scrapping and filling) to complete side as per existing shape and size in drawing as directed by Engr-in- charge.
Repair/Relacement of following U/S parts of " Table Dressing Ladies" with suitable new parts of existing shape & size complete to match the original as shown on drg No -FD-251, FD-378and directed by Engr-In-Charge :-
S&F of drawer of preleminated BWP MDF board 18mm thick exterior grade duly fixed with 4mm thick teak wood beading as per drg and as directed by Engr-in-Charge
S&F of knob acrylic of approved quality
S&F frame of first class hard wood (Teak) including 6mm thick ply wood grade BWP type for back side of mirror duly fixed with frame as per drg and as directed by Engr-in-Charge
S&F of looking mirror of first class quality ISI marked size 1220x380x5mm thick as approved by GE.
M&L for two coats french polishing with high class finishing (after rubbing/scrapping and filling) to complete side as per existing shape and size in drawing as directed by Engr-in- charge.
M/s R.K.Jain
M R Taders
M/SDoon furnishers
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .