MAINTENANCE AND REPAIRING WORK OF VARIOUS COMMUNITY HALL/PARTY PLOT, SWIMMING POOL AND INDOOR STADIUM IN SUB ZONE-1 IN SOUTH WEST (ATHWA) ZONE. (3RD ATTEMPT)

m No. ITEM Qty. Rate Per Amount

Part -A Civil Work.

1 1 Demolition including stacking of serviceable materials with all

lead and lift. (i) RCC

(i) RCC work 20.00 1110.75 C.M.

2 2 Demolition of brick work and stone masonry including stacking of

serviceable materials and disposal of unserviceable materials with all

lead and lift. (i) On Cement Mortar. 25.00 577.92 C.M.

3 3 Removing and scraping of old deteriorated plaster of any thickness

from wall / RCC member including stacking of serviceable material and

disposal of unserviceable from site of work with all lead and lift. 50.00 20.55 S.M.

4 4 Dismentaling of sheet roofing inlcuding ridges, Hips, Valleys, Gutters

etc. stacking of serviceable materials and disposal of unserviceable

materials with all lead and lift. (i) G.I. sheet roofing. 40.00 50.11 S.M.

5 4A Dismentling door, windows, ventilators etc. (wood or steel) shutters

including chowkhats architraces, holdfasts and other attacement etc.

complete and stacking them within all lead and lift. (i) Exceeding

Sq.M. in area. 15.00 263.90 No.

6 5 Dismentling door, windows, ventilators etc. (wood or steel)

shutters including chowkhats architraces, holdfasts and other

attacement etc. complete and stacking them within all lead

and lift. (i) Not exceeding 3 Sq.M. in area. 0.00 197.09 No.

7 Self.Ex Removing existing water proofing material including stacking of

pl. 5 serviceable materials and disposal of unserviceable materials with all

lead and lift 10.00 107.60 S.M.

8 6 Dismentling steel work including distempering and stacking

the maerials with all lead and lift. 19.73 3.85 Kg.

9 7 Dismantling sanitary fittings like wass basin, W.C. pan Indian and

European type, flushing tank etc. including stacking the materials with

all lead and lift. 16.00 425.93 No.

10 Self.Ex Dismentling C.I. pipes G.S.W. pipes and A.C. rain water pipes with

pl. 8 fittings and clamps including stacking the materials with all lead and lift.

(for any dia, of pipe) 10.00 74.77 R.M

11 9 Dismentling barbed wire in fencing including making rolls and also

including dismentling fencing posts including all earth work concrete in

base and making good the disturbed fround stacking useful materials

as directed and disposing as directed and disposing of the

unserviceable materials with all lead and lift. 10.00 70.15 R.M

12 Self.Ex Dismentalling G.I. chain link fencing including making rolls and also

pl. 10 including dismentaling posts including all earth work concrete in base

and making good the disturbed ground staking useful materials as

directed and disposeing of the unserviceable materials with all lead

and lift. 10.00 25.00 S.M.

13 Self.Ex Removing of All Scrap Material in tractor with hydraulic trailer and

pl. 11 Nos. Of labours from Campus Boundry

14 12 Boring holes 3.5 mt.deep in ordinary soil ( for cast in situ piles) &

disposal of the surplus excavated soil as directed within a lead of

50 M. For following diameter of piles.

15 13 Excavation for foundation includ.sorting out & stacking of useful

materials & disposing of the excavated stuff upto 50 mt. Lead &

all lift, watering etc. Comp. (A) Loose or Soft soil

13 (A) Executed With Mechanised Efforts / Machinaries

(A) Loose or Soft soil

(1) Up to 1.5 Mt. depth 15.00 123.13 C.M.

13 (B) Executed With Manual Labours

(A) Loose or Soft soil

(1) Up to 1.5 Mt. depth 15.00 212.52 C.M.

16 14 Providing & Laying C.C1:5:10 (1cement :5coarse sand :10 graded

stone agg. 40 m.m Nominal size )& curing comp. excl. cost of from

work in :Foundation & Plinth 17.00 2606.92 C.M.

m No. ITEM Qty. Rate Per Amount

17 14A Providing & laying cement concrete 1:4:8 (1 cement:4 coarse sand:8

graded stone agg. 40 mm nominal size) & curing comp. excl.cost of

form work in (A) Foundation and Plinth 13.00 2769.69 C.M.

18 14B Providing & laying C.C 1:3:6 (1cement :3 coarse sand :6 Crushed stone

agg 20m.m Nominal size)&curing comp. excl. cost of form work in :(a)

foundation & Plinth 15.00 3095.25 C.M.

19 15 Providing & laying cement concrete 1:1.5:3 (1 cement:1.5 sand:3

graded stone agg. 20 mm nominal size)& curing comp. Includ.cost of

form work but exclu. Cost of reinforcement for reinforced concrete work

in : (A) Foundation, footing, Base of columns and Mass concrete.

20 16 Providing & laying ordinary cement con.1:1.5:3 (1cement:1.5sand:

graded stone agg. 20 mm nominal size) finishing smooth curing etc.

comp. Incld. Cost of form work but excl. Cost of reinforcement for

R.C.C. Work in : Up to G.L./P.L.

(1)Having c/s area up to 0.08 sq.mt 10.00 12844.32 C.M.

(2) Having c/s area more than 0.08 sq. mt. & upto 0.12 sq.mt 5.00 11166.97 C.M.

(3) Having cross sectional area more than 0.12 sq. mt. 2.00 9201.68 C.M.

(1)Having c/s area up to 0.08 sq.mt 10.00 9102.61 C.M.

(2) Having c/s area more than 0.08 sq. mt. & upto 0.12 sq.mt 5.00 8174.41 C.M.

(3) Having cross sectional area more than 0.12 sq. mt. 2.00 7086.88 C.M.

21 17 Providing & fixing IS Mark TMT Bar FE 500D reinforcement for R.C.C.

work incl. bending, binding & placing in position etc. comp. Upto

22 18 Brick work using common burnt clay building bricks having crushing

strength not less than 35 kg./Sq.Cm. in foundation and plinth in Cement

Mortar 1:6 (1- Cement : 6 -fine sand)(C) Fly Ash Bricks

23 19 Filling available excavated earth (excluding rock) in trenches. plinth,

sides of foundations etc. in layers not exceeding 20 cm. in depth

consolidating each disposited layer by ramming and watering.

24 13 Filling in foundation and plinth with murrum or selected soil in layers of

20cm. thickness including watering, ramming and consolidating etc.

complete. 8.00 301.78 C.M.

25 19 20mm thick sand faced cement plaster on walls upto height 10 metres

above ground level consisting of 12mm thick backing coat of C.M. 1:3

(1-cement : 3-sand) and 8mm thick finishing coat of C.M. 1:1 (1-cement

: 1- sand) etc. complete. 2.00 347.42 S.M.

26 20 Providing & laying ordinary cement con.1:1.5:3(1cement:1.5sand:3

graded graded stone agg. 20 mm nominal size) finishing smooth

curing etc. comp. Incl.. Cost of form work but excl. Cost of

reinforcement for R.C.C. Work in :

(1) Having c/s area up to 0.08 sq.mt

Ground Floor 5.00 12844.32 C.M.

First Floor 3.00 12885.28 C.M.

Second Floor 0.00 12926.24 C.M.

Terrace (third) Floor 0.00 12967.19 C.M.

(2) Having c/s area more than 0.08 sq. mt. & upto 0.12 sq.mt

Ground Floor 8.00 11166.97 C.M.

First Floor 5.00 11207.92 C.M.

Second Floor 0.00 11248.88 C.M.

Terrace (third) Floor 0.00 11289.83 C.M.

(3) Having cross sectional area more than 0.12 sq. mt.

Ground Floor 5.00 9201.68 C.M.

First Floor 2.00 9242.63 C.M.

Second Floor 0.00 9283.59 C.M.

Terrace (third) Floor 0.00 9324.54 C.M.

(1) Having c/s area up to 0.085 sq.mt

Ground Floor 3.00 9102.61 C.M.

First Floor 3.00 9143.56 C.M.

Second Floor 0.00 9184.52 C.M.

Terrace (third) Floor 0.00 9225.47 C.M.

(2) Having c/s area more than 0.085 sq. mt. & upto 0.12 sq.mt

Ground Floor 3.00 8174.41 C.M.

First Floor 3.00 8215.36 C.M.

Second Floor 0.00 8256.32 C.M.

Terrace (third) Floor 0.00 8297.27 C.M.

(3) Having cross sectional area more than 0.12 sq. mt.

Ground Floor 4.00 7086.88 C.M.

First Floor 3.00 7127.84 C.M.

Second Floor 0.00 7168.79 C.M.

Terrace (third) Floor 0.00 7209.75 C.M.

(1) Slabs having more than 8cm. and upto 10 cm. Th'.

Ground Floor 5.00 7984.42 C.M.

First Floor 4.00 8025.37 C.M.

m No. ITEM Qty. Rate Per Amount

Second Floor 0.00 8066.33 C.M.

Terrace (third) Floor 0.00 8107.28 C.M.

(2) Slabs having more than 10 cm. & upto 13 cm. Th'.

Ground Floor 10.00 7396.96 C.M.

First Floor 7.00 7437.92 C.M.

Second Floor 0.00 7478.87 C.M.

Terrace (third) Floor 0.00 7519.83 C.M.

(3) Slabs having more than 13 cm. Thickness

Ground Floor 10.00 6813.01 C.M.

First Floor 5.00 6853.96 C.M.

Second Floor 0.00 6894.92 C.M.

Terrace (third) Floor 0.00 6935.87 C.M.

Ground Floor 5.00 9982.37 C.M.

First Floor 5.00 10023.32 C.M.

Second Floor 0.00 10064.28 C.M.

Terrace (third) Floor 0.00 10105.23 C.M.

Ground Floor 5.00 5576.81 C.M.

First Floor 5.00 5617.76 C.M.

Second Floor 2.00 5658.72 C.M.

Terrace (third) Floor 0.00 5699.67 C.M.

27 21 Providing & laying ordinary cement con.1:1.5:3(1cement:1.5sand:3

graded graded stone agg. 20 mm nominal size) finishing smooth

curing etc. comp. Incl.. Cost of form work but excl. Cost of

reinforcement for R.C.C. Work in :

(A) Stair cases including landings etc

Ground Floor 5.00 7698.11 C.M.

First Floor 5.00 7739.06 C.M.

Second Floor 0.00 7780.02 C.M.

Terrace (third) Floor 0.00 7820.97 C.M.

(B) Vertical and horizontal fins

Ground Floor 5.00 11613.07 C.M.

First Floor 5.00 11654.03 C.M.

Second Floor 2.00 11694.99 C.M.

Terrace (third) Floor 0.00 11735.94 C.M.

28 22 Providing & fixing IS Mark TMT Bar FE 500d reinforcement for

R.C.C. work incl. bending, binding & placing in position etc.comp.

Ground Floor 650.00 77.29 Kg.

First Floor 500.00 78.34 Kg.

Second Floor 350.00 79.39 Kg.

Terrace (third) Floor 100.00 80.44 Kg.

29 23 Brick work using common burnt clay building bricks having crushing

strength not less than 35 kg./Sq.Cm. in Cement Mortar 1:6 (1-

Cement : 6 -fine sand)(C) Fly Ash Bricks

Ground Floor 15.00 4729.83 C.M.

First Floor 10.00 5018.55 C.M.

Second Floor 8.00 5307.27 C.M.

Terrace (third) Floor 0.00 5595.99 C.M.

30 24 Half brick masonry in common brunt clay building bricks having

crushing strength not less than 35 Kg/Sq.Cm. in Cement mortar 1:4 (1-

Cement : 4 - coarse sand ) in foundation and plinth (C)Fly Ash Bricks

Ground Floor 5.00 712.81 S.M.

First Floor 5.00 719.37 S.M.

Second Floor 0.00 725.94 S.M.

Terrace (third) Floor 0.00 732.50 S.M.

31 25 Uncoursed rubble masonary with hard stone of approved

quality in foundations and plinth in cement mortar 1:6 (1 Cement :

6 sand) including leveling up etc. complete. 10.00 2586.61 C.M.

32 26 Pointing on Coursed stone masonary with cement mortar 1:3 (1 cement

(A) Flush Pointing 10.00 101.89 S.M.

(B) Ruled Pointing 10.00 105.24 S.M.

33 27 Pointing on Uncoursed stone masonary with cement mortar 1:3 (1

cement : 3 Sand) ---

(A) Flush Pointing 0.00 110.24 S.M.

(B) Ruled Pointing 0.00 114.25 S.M.

34 28 Providing Rubble Pitching with hard stone of approved quality in

cement mortar 1:6 (1 Cement : 6 Coarse sand) including leveling up

,Curing etc. complete excluding pointing (M.R) 25.00 2550.00 C.M.

35 29 Providing & Filling Rubbles including hand packing & filling interstics

with Quarry Spalls behind abutments and between returns as directed.

36 30 Providing upto floor two level precast cementconcrete jali or grill 1:2:4

mix (1- Cement : 2- coarse sand : 4-graded stone aggregate 6mm

nominal size) reinforced with 1.6 mm dia. Mild steel wire including

roughening,cleaning, fixing and finishing in cement mortar 1:3 and

curing complete. (B) 40mm thick.

Ground Floor 50.00 741.93 S.M.

First Floor 40.00 752.39 S.M.

Second Floor 10.00 762.85 S.M.

Terrace (third) Floor 25.00 773.32 S.M.

m No. ITEM Qty. Rate Per Amount

37 31 Providing & Applying 10mm.th.cement plaster in single coat on brick/

concrete walls similar surfaces for plastering & finished even & smooth

with a floating coat of cement slurry mixed with admixture of lime or

neeru in required proportion etc. comp. in C.M 1:3 (1 cement : 3sand)

(A) For wall and similar surfaces

(A) For wall and similar surfaces

Ground Floor 100.00 199.28 S.M.

First Floor 50.00 228.84 S.M.

Second Floor 10.00 258.39 S.M.

Terrace (third) Floor 25.00 287.94 S.M.

(B) For ceilings & soffits of stairs

Ground Floor 40.00 225.34 S.M.

First Floor 30.00 254.89 S.M.

Second Floor 10.00 284.45 S.M.

Terrace (third) Floor 0.00 314.00 S.M.

38 32 20mm thick sand faced cement plaster on walls for height more

than 10 metres above ground level consisting of 12mm thick backing

coat of C.M. 1:3 (1-cement : 3-sand) and 8mm thick finishing coat of

C.M. 1:1 (1-cement : 1- sand) etc. complete. 25.00 347.42 S.M.

39 32A Providing & Applying 20mm. Th. Heavy Roller plaster on walls or

similar surfaces at all floor levels consisting of 12 mm av. Th. Backing

coat of C.M. 1:3 (1 cement:3 sand) & 8 mm. th. Finishing coat of

C.M. 1:1 (1 cement: 1 sand) apply thick cement slurry and apply

roller horizontal as well as vartical ( two times ) up to good quality and

size of grain in elevation as per directed by engineer incharge.

40 33 Providing throating or plaster drip and moulding it to R.C.C.

chajja etc. comp.. For all floor 10.00 43.74 R.M.

41 33A Providing 20 mm deep finished groove in plaster in line and level etc.

Comp. For all Floor (M.R.) 10.00 50.00 R.M.

42 34 Providing and laying polished Kota stone slab flooring over 20mm

(Average) thick base of cement mortar 1:6 (1-cement : 6-coarse sand)

or L.M. 1.1.5 (1-Lime putty :1.5 - coarse sand) laid over and

jointed with grey cement slurry mixed with pigment to match the shade

of slab including rubbing and polishing etc. complete. (A) 25mm thick

43 35 Providing and laying polished kota stone slab 25mm thick in

risers of steps,skirting Dedo and pillars laid on 10mm thick

cement mortar 1:3 (1- Cement : 3 coarse sand) and jointed with

gray cement slury mixed with pigment to match the shade of slab

including rubbing and polishing etc. complete. 20.00 1130.79 S.M.

44 36 Providing & Laying white glazed tiles 6mm.th. of Orient, Kajaria,

Jhonson,Nitco,Somani,Bell make at all floor levels,in flooring, treads of

steps & landings laid on a bed of 12 mm. Av.Th.C.M.1:3(1cement :3

sand) finished with flush pointing in white cement etc.com. For all

floors 5.00 900.29 S.M.

45 37 Providing & Laying white glazed tiles 6mm.th.Of Orient,Kajaria,

Jhonson,Nitco,Somani,Bell make at all floor levels in skirting risers of

steps & dado on 10 mm. th.C.M.1:3(1cement :3 sand) including

necessary cement paste for fixing and joined with white cement slurry

etc. complete. For all floors 10.00 932.02 S.M.

46 38 Providing and laying Ceramic tiles 6mm thick in flooring treads of steps

and landing laid on a bed of 12mm thick cement mortar 1:3 (1-cement :

3-coarse sand ) finishing with flush pointing in white cement.

47 39 Providing and laying Ceramic tiles 6mm thick in skrting risers of

steps and dedo on 10mm thick cement plaster 1:3 (1-cement : 3-

coarse sand) and jointed with white cement slurry 40.00 1037.25 S.M.

48 40 Providing & laying marble stone slab flooring over 20 mm.av.

base of C.M.1:6 ( 1 cement :6 coarse sand ) & jointed with grey

cement slurry incl. rubbing & polishing comp.(A) Marble slab 25 mm.

49 41 Providing & laying granite slab 18mm thick in flooring, treads of

steps and landing laid on bed of 20mm thick cement mortar 1:6 (1

Cement : 6 coarse sand) or lime mortar 1:1.5 laid and finished with

flush pointing in white or colour cement including rubbing and

polishing complete. ( Basic Rate:-Rs.1347.46/S.M.) 5.00 2410.00 S.M.

50 42 Providing & laying granite slab 18mm thick in skirting, risers of

steps, dedo and pillars laid on 10mm thick cement mortar 1:4 (1

Cement : 4 Coarse sand) and finished with flush pointing in white

or colour cement including rubbing & polishing comp.. (Basic Rate:-

51 Self.Ex Providing & laying granite slab 18mm thick in Window-Door seal

pl. 43 Frame Etc laid on 10mm thick cement mortar 1:4 (1 Cement :

Coarse sand) with nessary adhesive material and finished with flush

pointing in white or colour cement, including rubbing & polishing comp..

(Basic Rate:- Rs.1000.0/S.M.) 5.00 2026.00 S.M.

Labour Charges For Edge Finished For Granite

m No. ITEM Qty. Rate Per Amount

53 45 Providing & laying Vitrified tiles of 8mm thick of Orient, Kajaria,

Jhonson, Nitco, Somani, Bell, Asian or Euro make in flooring,treads of

steps & Landing laid on bed of 20 mm (Average) base of cement

mortar 1:6 (1 Cement : 6 Coarse sand) on new surface or fixing on

existing flooring by adhesive material including dismentaling of existing

flooring and jointed with colour cement slurry including finished with

flush pointing & cleaning the surface etc. comp.Size 24" x 24" For

Antiskid tiles 5.00 1467.72 S.M

54 46 Providing and laying Vitrified tiles 8 to 10 mm thick, 24" x 24" in flooring

treads of steps and landing laid on a bed of 12mm thick cement mortar

1:3 (1 cement : 3 coarse sand) finishing with flush pointing in white

cement. 40.00 1092.37 S.M

55 47 Providing and laying Vitrified tiles 8 to 10 mm thick, 24" x 24" in skrting

risers of steps and dedo on 10mm thick cement plaster 1:3 (1 cement :

3 coarse sand) and jointed with white cement slurry.

56 41 Providing and laying chequered precast concrete tiles 22mm thick

with aggregate of sizes upto 6mm in floors treads of steps and landing

on 20mm thick bed of C.M. 1:6 (1 cement : 6 sand) or L.M. 1:1.5

(1 Lime putty : 1.5 sand) jointed with neat cement slurry with pigments

to match the shade of the tiles. 40.00 545.76 S.M.

57 48 Providing and laying rough chiseled dressed stone flooring over

20mm thick base of cement mortar 1:5 (1 cement : 5 coarse

sand) or L.M. 1:1.5 including pointing with cement mortar 1:2 (1

cement : 2 stone dust) etc. (A) 25mm thick 0.00 576.79 S.M.

58 Self.Ex Providing & Laying polished kota stone of machine cut edge patti of

pl.49 10cm wide 22 mm. thk. in ramp flooring as per design, laid on 10 mm.

th. C.M.1:3(1cement :3 sand) including necessary cement paste for

fixing and joined with cement slurry etc. complete. For all floors. 30.00 98.00 R.M.

59 Self.Ex Providing and laying cement concrete flooring 1:2:4 (1 cement :

pl.50 course sand : 4 graded stone aggregate 20mm nominal size) laid

in one layer finished with a floating coat of neat cement

(A) 40mm thick 0.00 319.03 S.M.

(B) 50mm thick 0.00 374.14 S.M.

60 51 Providing & Constructing polished Kotah stone cooking platform

0.6mt. wide & 0.75mt. height, including one end side kota stone(

Double Polish) of 1.25mt height & front kota stone patti of 10cm wide

,vertical partitions of half B.M wall in C.M 1:4 and 10mm th plaster in

1:3with finishing smooth with cement slurry as required and steel sink

of 0.45mt x 0.45mt size of approved quality and make with required all

fittings & Fxitures etc. Comp as per instruction given by site in charge

at all floors 5.00 3010.00 R.M.

61 Self.Ex Providing and constructing sandwitch type Granite stone cooking

pl.52 platform 0.6 mt. wide & 0.75 mt. height, including one end side granite

stone (Double Polish) of 1.25 mt. height & front granite stone patti of

cm wide, vertical partitions of half B.M. wall in C.M. 1:4 and 10mm th.

plaster in 1:3 with finishing smooth with cement slurry as required and

Stainless Steel sink of 0.45 mt x 0.45 mt size of approved quality and

make with required all fitings & fixitures etc. comp as per instruction

given by site in charge at all floors. (Basic rate of Granite Rs.1,200.00 /

62 53 Providing & fixing at all floor levels,both face polished machine cut

edge green kota stone slab (30mm) for urinal partition joined with grey

cement slurry (1:1) incl. Rubbing & polishing etc. complete. (M.R.)

63 Self.Ex Providing & fixing at all floor levels,both face polished machine cut

pl.54 edge Marble slab for urinal partition joined with grey/White cement

slurry (1:1) incl. Rubbing & polishing etc. complete. (M.R.) (Basic Cost-

64 55 Providing & Fixing including making gisi & fixing at all floor levels both

face polished machine cut edge, granighte stone slab for urinal

partition joined with grey cement mortar (1:3) incl. Rubbing & Polishing

etc. Complete. Including half round edge for granite.(Basic Rate of

65 Self.Ex Providing & fixing 35mm.th. Flush Door Solid Double Core type Both

pl.56 Face water proof Ply Vennered & 1.5 mm th.laminate shall be pasted

on both side with adhesives as specified by the manufacturers. The

laminate shall be as per approved shade & texture, of make incl. Sal

wood frames of finished size 12cm x 7cm.incl. S.S. Hinges with

nessary screws & Anodized aluminum fixtures & fastenings For all

Floor (M.R) 20.00 3720.00 S.M.

(A) Same as Above But Without Frame 50.00 2520.00 S.M.

66 57 Providing & fixing 35mm.th. Indian teak wood shutters for

doors, windows & clearstory windows incl. Indian teak wood frames of

finished size 12cm x 7cm.incl. anodized aluminum fixtures &

fastenings incl. Primer coat of approved quality & two coats of oil

painting etc. For all Floor

(A) Fully Panelled 10.00 5533.68 S.M.

(B) Partly Panelled and Partely Galzed 10.00 5185.03 S.M.

(C) Fully Galzed 8.00 4836.39 S.M.

67 58 Providing and fixing 35mm thick shutters for Doors, windows and

clearstory windows including anodised alluminium butt hinges with

necessary screws. (A) Indian teak wood. (i) Fully Panelled. 5.00 4101.06 S.M.

m No. ITEM Qty. Rate Per Amount

68 Self.Ex Providing and fixing sal wood frame 12 cm x 7 cm size including

pl.59 anodized fixtures and fastening etc. including primer coat of approved

quality and two coats of oil paint.etc complete. (For all floors)

69 Self.Ex Providing and fixing sheet glass of good quality badded in putty and

pl.60 fixed with wooden beadings incldg.the cost of first class teak wood

beading and necessary cutting of glass etc. in the place of

damaged/broken sheet glass of the existing windows /ventillations etc.

as shown & as ditrected by Engineer-in-charge .(For all floors)

(a) 4 mm plain glasss 10.00 724.17 S.M.

(b) 6 mm wired figured glasss 5.00 650.44 S.M.

70 Self.Ex Providing and Replace door, Window S.S. Fixtures fix in wooden /

pl.61 Alluminium door - window

(A) 4" S.S. Hinge 10.00 75.00 No.

(B) 5" S.S. Hinge 15.00 85.00 No.

(C) 8" S.S. Aldraf 10.00 175.00 No.

(D) 10" S.S. Aldraf 10.00 200.00 No.

(E) 12" S.S. Aldraf 10.00 250.00 No.

(F) 4" S.S. Handle 4mm. Th. 10.00 100.00 No.

(G) 6" S.S. Handle 4mm. Th. 10.00 125.00 No.

(H) 4" S.S. Stopper 4mm. Th. 8.00 75.00 No.

(I) 8" S.S. Stopper 4mm. Th. 12.00 125.00 No.

(J) 6" S.S. Pavan Ankdi Heavy duty 10.00 35.00 No.

(H) Alluminium door lock 10.00 200.00 No.

(I) Door Closer 12.00 200.00 No.

71 Self.Ex Providing and fixing FRP FRAME size 125 x 65 mm and 35 mm thick

pl.62 FRP shutter with wood grain raised panneled design finish shutter

having extra reinforcement on sides & edges in Gel coat finish. The

core of the shutter & frame is to be filed up with injected polyurethene

foam done in situ along with embedded wooden pieces for stiffening &

also taking hinges & fixtures. The whole FRP frame & shutter is to be

water proof weather proof,termite proof &resistance to mild acid/alkali.

Rates are to be inclusive of S.S.hinges withfastener sleeve &

alluminium fixtures & fastentings. 4.00 2019.98 S.M.

(A) Same as Above But Without Frame 10.00 2805.78 S.M.

72 Self.Ex Reparing & Servicing of existing door/window including cost of

pl.63 hardware (Fevicol,Nail and NF screw etc.) but excluding cost of fixtures

as directed by Engineer in-charge.

(A) Wooden door 10.00 150.00 No.

(B) Partly Panelled and Partely Galzed alluminium door 10.00 150.00 No.

(C) Wooden Window shutter 10.00 75.00 No.

(D) Alluminium Window shutter 10.00 75.00 No.

73 Self.Ex Providing & fixing Glass Table Top using 08mm th.clear glass with

pl.64 crystal edge & necessary hardware materials etc. complete as per

instruction by engineer in charge. 5.00 1350.00 S.M.

74 Self.Ex Providing & fixing door closer Ozon / Dorma / Hyper / Hardwin / Godrej

pl.65 / Alluminium body ISI brander equivalent make with necessary

hardware materials etc. complete as per instruction by engineer in

charge. 5.00 1400.00 No.

75 Self.Ex Providing & fixing water proof plywood (ISI marks 710 grade) at the

pl.66 door,window and any space in the building. necessary hardware,screws

materials etc. complete as per instruction by engineer in charge.

(F) 12 mm BSL partical board green or Equalent make 10.00 550.00 S.M.

(G) 12 mm plan E board Evrest or Equalent make 10.00 470.00 S.M.

76 Self.Ex Providing & fixing laminated sheet 1mm thick suede finished as per

pl.67 approved make with & necessary adhesive,hardware materials etc.

complete as per instruction by engineer in charge. 10.00 650.00 S.M.

77 Self.Ex Providing & fixing Mortise lock body with 70mm cylinder (make godrej /

pl.68 ozon / inox ) fix in wooden door with necessary hardware materials etc.

complete as per instruction by engineer in charge. 10.00 1500.00 S.M.

78 Self.Ex Replacement of Revolving chair parts ISI marks with necessary

pl.69 hardware, screws materials etc. complete as per instruction by

engineer in charge.

(A) P.V.C. moulded Hand rest 25.00 325.00 No.

(B) Hydraulic gas pump 25.00 550.00 No.

(C) Cushion sheet, back with fabric / rexine 15.00 1850.00 No.

(D) Rubber castor / wheels 15.00 100.00 No.

79 Self.Ex Reparing & Servicing of wooden office table / file storage using screws

pl.70 and necessary hardware materials complete as per instruction by

engineer in charge. 10.00 200.00 No.

80 Self.Ex Replacement of wooden office table / file storage parts ISI marks with

pl.71 necessary hardware, screws materials etc. complete as per instruction

by engineer in charge.

(A) Drawer / shutter locks 25.00 250.00 No.

(B) SS 4" D Handles 16.00 80.00 No.

(C) Drawer channel 7.00 275.00 No.

(D) SS 3" heavy hinges 19.00 80.00 No.

m No. ITEM Qty. Rate Per Amount

81 Self.Ex Providing & laying sun control or frosted milky glass film as approved

pl.72 colour,design,cutting complete as per instruction by engineer in

charge. 12.00 480.00 S.M.

82 Self.Ex Providing & fixing wooden notice board with Righting laminated board

pl. finish using 12mm th.Back commercial plywood approved make, 01mm

th. SF finish laminate, teakwood framing & necessary hardware

materials etc. inside and liping french polish finish complete in all

respects by engineer in charge complete. 12.00 1950.00 S.M.

83 74 Providing and fixing window having extruded aluminium Powder

Coated section frame main outer size 95 mm x 24 mm x 1.17 mm (of

jindal section no:2459 @ Wt. of 0.738 Kg/mt), horizontal Three track

member size 92 mm x 31.75 mm x 1.30 mm (of jindal section no;8688,

@ Wt. 1.07 Kg/mt), vertical member of size 92 mm x 31.75 mm x

mm (of jindal section no:8933, @ Wt. 1.06 Kg/mt) with sliding shutters

of horizontal member size 40 mm x 18 mm x 1.29 mm (of jindal section

no:8947 @ wt. of 0.456 kg/mt), vertical member of size 40 mm x

mm x 1.29 mm (of jindal section no:8949 @ wt. of 0.456 kg/mt) with

mm thick transparent bronze colour tinted float glass with powder

coated aluminium fittings & fixtures and transparent silicon sealant

glass fixing to frame as per details etc.

(A) Same as above but Colour anodized 15.00 1591.87 S.M.

84 75 Providing and fixing window having extruded aluminium Powder

Coated section frame main outer size 63.50 x 38.10 x1.95 mm (of

Jindal section no.4605, @ Wt. 1.094Kg/mt) horizontal Two track

member size 61.85 mm x 31.75 mm x 1.20 mm (of jindal section

no:8687, @ Wt. 0.695 Kg/mt.) vertical member of size 61.85 mm x

31.75 mm x 130 mm (of jindal section no:8758 @ wt. of 0.659 kg/mt)

with sliding shutters of horizontal member size 40 mm x18 mm x

mm ( of jindal section no:8949, @ Wt. of .456 Kg/mt) vertical member

of size 40 mm x 18 mm x 1.29 mm (of jindal section no:8947, @ Wt. of

0.456 Kg/mt/section 8948, @ Wt. of 0.457 Kg/mt) with 5 mm thick

tranparent bronze colour tineted float glass with powder coated

aluminium fittings and fixtures and transparent silicon sealant glass

fixing to frame as per details etc. complete for window.

(A) Same as above but Colour anodized 30.00 1705.67 S.M.

85 Self.Ex Providing and fixing standared extruded of aluminium section of size

pl.76 x 37.0 x0.90 mm (of Jindal section no.14080, @ Wt. 0.471 Kg per mt)

with colour powder coated alluminium frame for Lovered Glass

ventilation with 4 mm thick Figured glass as details etc. complete for

ventilation. 13.00 1950.00 S.M.

(A) Same as above but Colour anodized 12.00 2000.00 S.M.

86 77 Providing and fixing standared extruded of aluminium section of size

x 37.0 x0.90 mm (of Jindal section no.14080, @ Wt. 0.471 Kg per mt)

with Powder Coated alluminium frame with 5 mm thick transparent

bronze colour tinted float glass as details etc. complete for fix window.

(A) Same as above but Colour anodized 0.00 1833.29 S.M.

87 Self.Ex Providing & fixing partly panel & partly glass Powder Coated

pl.78 Aluminium doors with aluminium section of Hindalco, Jindal

Narmada,Banco or Equivalent approved make having Poder Coated

outer frame Leg Partition section of 63.50 mm x 38.10 mm having

weight 1.158 kg. / R.M. shutter section having size 83.5 mm x 44.45mm

( top & bottom: 1.384 kg./rmt. and middle 1.139 kg./rmt.) door vertical

47.62mm x 44.45 mm ( vertical:0.881 kg./rmt. & top hing side:0.974

kg./mt.), Glazing Clip (Jindal Section No. 19370 Wt. 0.109 Kg./ Mt.) with

5mm thick sheet glass in acid frogting and 12 mm thick prelaminated

sheet of Greenlam, Panama or archid make as approved by Engineer-

in-charge including fixing brass pivot, handle, lock etc. complete. (M.R)

(A) Same as above but Colour anodized 10.00 3237.00 S.M.

88 Self.Ex Providing & fixing Powder Coated Aluminium partly glazed and

pl.79 partly panelled partition using medium duty sections of

Hindalco,Zindal, Narmada, Banco or Equivalent approved make having

section 63.50 mm x 38.10mm ( Frame-.758 kg/rmt & Middle section-

0.819 Kg./rmt), Galzing Clip with 5 mm thick clear float glass of

approved make including all other necessary fittings and fixtures. Entire

work will have to be made water proof using necessary rubber

sectioned wherever required. Gaps all round the frame to be filled with

approved water proof sealent. Bottom portion of doors both side to be

covered with 12mm thick prelaminated particle board of approved

make and quality and as per design. (M.R)

(A) Same as above but Colour anodized 15.00 2400.00 S.M.

89 80 Providing & fixing M.S.Grills of required pattern to wooden frames of

windows etc. At all floor levels with M.S. flats at required spacing &

frame around square or round bars with round headed bolts & round

headed bolts and nuts or by screws incl. Priming coat of Red lead paint

etc. comp. (A) Plain grill For all Floors 101.00 109.41 Kg.

m No. ITEM Qty. Rate Per Amount

90 81 Providing & fixing in position collapsible steel shutters with vertical

channels 20 x10 x 2 mm. Braced with flat iron diagonals 20 x5mm size

with top & bottom rails of T-iron 40x40x6mm. with 38mm dia. steel

pulleys comp. with bolts, locking arrangements, stoppers, handles incl.

applying a priming coat of Redlead paint etc. comp. 20.00 6158.35 S.M.

91 82 Providing & applying painting two coats at all floor levels on new steel

other metal surface with synthetic enemal paint, brushing interior to

give an even shade incl. cleaning the surface of all dirt, dust & other

foreign matter etc. Comp. (A) For plain grill For all Floor

92 82 Applying Priming coat over new steel and other metal surface after

over and including preparing the surface by throughly cleaning oil,

grease dirt and other foreign matter and scoured with brushed fine steel

wool, scrapers and sand paper with ready mixed priming paint brushing

red lead. 20.00 36.74 S.M.

93 82 Painting two coat (excluding priming coat) on new steel and other

metal surface with synthetic enemal paint, burshing to give an even

shade including cleaning the surface of all dirt, dust and other foreign

matters. 20.00 68.57 S.M.

94 82A Painting two coats of enamel paint over priming coat after removing

entire whitewash/colourwash surface dirt, dust foreign matter & also

incl. preparing the surface even & sand papered smooth etc.

95 83 Providing and fixing M.S. Fan clamps type 1 to 16 mm dia M.S. bar

bent to shpe with hooked ends to RCC slabs curing, layig including

painting the exposed portion of loops, all as per standard design

complete. 13.00 135.47 No.

96 84,85 White Washing with lime on wall surface to give an even shade &

surface incl. throughly brooming the surface to remove dirt, dust mortar

drops & losse scales of lime wash & other foreign matter Two coats.

(A) walls 10.35 13.03 S.M.

(B) Ceiling 15.50 14.21 S.M.

---do Extra Subsequant coat over above Item

(A) walls 9.50 6.01 S.M.

(B) Ceiling 17.50 6.51 S.M.

97 Self.Ex Providing & applying textured matt paint at all floor levels of approved

pl.86 quality in two coats after thoroughly brooming the wall or similar

surfaces to remove all dust dirt & loose mortar droppings , Filling

Surface imperfections such as holes and cracks using a mixture of

white cement and fine sand only (in the ratio of 1:3) & watering the

surface incl. curing etc. complete to give even shade as per the

instruction of engineer in charge etc. complete. (M.R.) 0.00 58.00 S.M.

98 Self.Ex Wall painting (two coats) with plastic emulsion paint of approved brand

pl.87 and manufacture on undecorated wall surface to give an even shade

including throughly brushing the surface free from mortar droppings

and other foreign matter and sand papered smooth.

For every subsequent coat Extra over item no.above 0.00 35.41 S.M.

99 88 Distempering two coats with oil bound washable distemper of

approved brand & manufacture & of required shade on wall surface to

give an even shade over and & incl. a priming coat of alkali resistance

primer of approved brand after throughly brushing the surface to give

an even shade after throughly brushing the surface free from mortar

droppings and other foreign matter and also including preparing the

surface even and smooth.

(A) walls 17.50 75.84 S.M.

(B) Ceiling 15.50 84.37 S.M.

---do Extra Subsequant coat over above Item

(A) walls 10.50 31.91 S.M.

(B) Ceiling 7.50 35.25 S.M.

100 89 Apply two coats of putty and two coats of primer of approved brand

and manufacture on new wall surface to give an even shade including

thoroughly brushing the surface free from mortar dropping and

other matter and sand papered smooth. 3.00 40.59 S.M.

101 90 Distempering two coats on previously distempering wall (without

primer) with oil bound washable distemper of approved brand &

required shade on wall surface to give an even shade after throughly

brushing the surfaces clean of all grease, dirt loose places of sceles &

also including preparing the surface even and smooth. 20.00 60.63 S.M.

102 Self.Ex Wall painting with two coats of Acrylic emulsion plastic paint of

pl.91 approved brand over existing surface to give an even shade & surface

free from mortar dropping & other foreign matter & sand papered

smooth etc. comp. 0.00 52.92 S.M.

m No. ITEM Qty. Rate Per Amount

103 92 Providing & applying two coats of weather shield max paint (3 coats

may be required in case of darker colours.)of ICI Dulux or Apex Ultima

of Asian Paint including applying exterior acrylic primer coat as per

manufacturers specification and directions in shade and colour

approved by architects, on exterior surfaces of the building including

scaffolding, preparing the surface, watering, curing etc. complete and

as directed by the architects and manufacturers.

Surface Preparation :

surface is thoroughly clean, dry and free from all loose dirt, chalk,

grease, fungi, algae and flaking paint. This can be achieved by

brushing with a wire/ stiff coir brush, followed by water jetting if

required. Fill up all minor cracks and defects with white cement and

sand mixture in the ratio 1:3. For application on previously painted wall,

previous coatings of paint must be thoroughly scraped off and Clean

the surface thoroughly using wire brushes.

Apply a liberal coat of exterior acrylic primer and allow it to dry for 4-5

hours. Application of putty is not recommended.

Minimum 4-6 hours duration is required between each coat of weather 20.00 82.00 S.M.

104 93 shield max&paint

Providing laying cement concrete 1:2:4 (1 cement:2 sand:4 graded

stone agg. 20 mm nominal size)& curing comp. Includ.cost of form

work but exclu. Cost of reinforcement for reinforced concrete work in :

(A) Foundation, footing, Base of columns and Mass concrete.

105 94 Providing & laying ordinary cement con.1:2:4 (1cement:2sand:4graded

graded stone agg. 20 mm nominal size) finishing smooth curing etc.

comp.Incld. Cost of form work but excl. Cost of reinforcement for

R.C.C. Work in :Up to G.L./P.L.

(1)Having c/s area up to 0.08 sq.mt 10.00 12335.51 C.M.

(2) Having c/s area more than 0.08 sq. mt. & upto 0.12 sq.mt 14.00 10658.16 C.M.

(3) Having cross sectional area more than 0.12 sq. mt. 0.00 8692.87 C.M.

(1)Having c/s area up to 0.08 sq.mt 15.00 8593.80 C.M.

(2) Having c/s area more than 0.08 sq. mt. & upto 0.12 sq.mt 10.00 7665.60 C.M.

(3) Having cross sectional area more than 0.12 sq. mt. 0.00 6578.07 C.M.

106 95 Providing & laying C.C 1:3:6 (1cement :3 coarse sand :6 crushed stone

agg. 20 m.m Nominal size)& curing comp. incl. cost of from work in:

wall caps/ copings. 13.00 4085.83 C.M.

107 96 Box Cutting the road surface to proper slope and camber for making

base includinng removing the excavated stuff and depositing on the

road side slope as directed up to 50 mt. lead. 1.00 109.41 C.M.

108 97 Preparation of subgrade with Compacting, Levelling and

consolidation of subgrade with miniroller /plate vibrator machine

including watering and filling in depressions which occur during the

process as directed by engineer in charge. 3.00 9.00 S.M.

109 98 Providing & filling with Mix soil in layers of 20 cm. Th'. Incl. watering,

ramming & consolidation etc. complete. 1.00 225.00 C.M.

110 Self.Ex Providing, Supplying & Sprading of Gravel in Play area including

pl.99 dressing etc. comp. 5.00 1150.00 C.M.

111 100 Supplying & filling fine sand(pana) in 75 mm / 100 mm / 150 mm

compacted thickness over the base including necessary compaction,

watering etc. complete. Item includes leveling by using vibratory plates

compacted machine and as directed by engineer in charge.

112 101 Removing & resetting existing readymade c.c. kerb stone of required

(Road size & thickness in line .level and in truly vertical position including

SOR filling joints in C.M. 1:1 (1 part of cement : 1 part of stone dust) smooth

24-25) pointing in C.M. 1:1 (1 part of cement : 1 part of coarse sand) including

watering etc. complete and as directed by engineer in charge.

113 102 Providing & fixing interlocking type Cement Concrete paver block of

approved shape & design having 60 mm thickness (M-40) purchased

from SMC's approved paverblock manufacturer only on fine sand

bedding. Item includes leveling by using vibratory plates compacted

machine. Item also includes all materials, Labour, euipments, tools,

plants, watering, cleaning etc. complete. (M.R) 100.00 553.00 S.M.

For Road Junction 80 mm thick ( M-50) 95.00 714.00 S.M.

114 102A Providing interlocking type Rubber moulded cement concrete paver

block of approved shape, design & colour having 60mm thickness (M-

35) purchased from SMC's approved paverblock manufacturer only &

fixing of fine sand bedding. Item includes levelling by using vibratory

plates compacted machine. Item also includes all materials, labour,

equipments, tools, plants, watering, cleaning etc. complete.(M.R)

With colour 55.00 524.00 S.M.

Without colour 50.00 524.00 S.M.

115 102B Removing and Resetting of Paver block of walk-way with necessary

sand / pana filling and make in line and level with necessary vibrating

using compactor machine. 25.00 108.00 S.M.

m No. ITEM Qty. Rate Per Amount

116 Self.Ex Removing and Resetting of Kota Stone paving for footpath in line

pl.103 level and in proper gradient including 25mm thick bedding in C.M. 1:6

(1 cement:6 sand ) with sufficient ramming consolidation. Providing

Joints in 1:3 (1 cement:3 sand ) and smooth pointing in C.M 1:1 (1

cement:1 sand ) including watering etc, complit and as diracted by

Engineer in charge. 25.00 110.09 S.M.

117 104 Providing 100mm thick readymade C.C. kerb of strength M-20 (size

300mm x 380mm) purchased from SMC's approved paverblock

manufacturer & setting in line, level and in truly vertical position,

including filling joints in C.M. 1:1 (1 part of cement : 1 part of stone

dust) smooth pointing in C.M. 1:1 (1 part of cement : 1 part of coarse

sand) including watering etc. complete and as directed by engineer in

charge.(M.R) 25.00 228.00 R.M.

For rounding at the edge of footpath (For fanning portion) 25.00 274.00 R.M.

118 105 Providing & laying Granular sub base (GSB)confirming to Grading-V of

Table 400.0 of compacted thick of 150mm with specified graded stone

metal and sand mixed in place and laid with mechanical means

spreading with motor grader and compacting with vibratory roller having

minimum 80-100 KN static weight to acheve desired density of 98% of

MDD including allmaterial, labour, machinery with all leads and lift etc.

complete. 13.00 1469.00 C.M.

119 Self.Ex Providing & laying cement concrete Pavement using 1:1.5:3 (1

pl.106 cement:1.5 sand:3 graded stone agg. 20 mm nominal size) &

Vaccuum Dewatering technique including floating surface with a

skim powder floater, curing etc. complete. (M.R) 5.00 5981.00 C.M.

120 Self.Ex Providing & laying cement concrete Pavement using 1:2:4 (1 cement:2

pl.107 sand:4 graded stone agg. 20 mm nominal size) & Vaccuum

Dewatering technique including floating surface with a skim powder

floater, curing etc. complete.(M.R) 5.00 5245.25 C.M.

121 Self.Ex Providing and laying 200 micron plastic sheet on prepared sub base

pl.108 For V.D.S Concrete (M.R) 15.00 26.00 S.M.

122 109 Steel work welded in built up sections, framed work including cutting,

hoisting, fixing in position and applying a priming coat of red lead paint

(A) in beams & joists channels angles, tees, flats with connection plates

or angle cleats as in main & cross beams, hip & trussed purlins

connected to common raffers & the like. 300.00 9108.48 Qtl.

(B)For work like chain link fencing, above compound wall etc. 3.00 9108.48 Qtl.

(C)in trusses & trussed purlins upto 25m.Span &15m.Overall height 3.00 10197.11 Qtl.

123 Self.Ex Steel work of square pipe hollow section, as per reqiure size, welded in

pl.110 built up sections, framed work including cutting, hoisting, fixing in

position and applying a priming coat of red lead paint. (A) In beams and

joints channels angles, tees, flats with connection plates or angles

cleats as in main and cross beam, hip and trussed purlins connected to

common rafters and the like.(Rate analysis)

124 111 Providing and fixing G.I. chain link of 50mm x 50mm size x 10 guage

thick with nuts, bolts, washer or G.I. pins, excluding M.S. angles

etc.complete as per relevent IS specification & directed by engineer in

charge. (TATA or Jindal Make) (M.R) 3.00 311.00 S.M

125 112 Providing and fixing and fitting TATA or Jindal make G.I. barbed wire

fencing with necessary barbed wire (12 x 14 guage, weight not less

than 0.14 kg. / mt.) pins, hooks, excluding M.S. angles etc. complete as

per relevent IS specification.& directed by engineer in charge (M.R)

126 113 Providing and Fixing hot dip concertina coil of 610 mm dia. made out

of 2.59 mm (12 SWG) hot dip galvanized (G.I. coating not less than

200 gm/sqmt.) th. wire having 80 nos. of spikes and 200 nos. of clips

made out of stainless steel (AISI 304) 1.5 mm th. dia., G.I. strips

mm th. ( G.I. coating not less than 120 gm/sq.mt.) weight of one coil

should not be lesss than 15 kg. etc., complete at the top of compound

wall fixed with S.S. clips and binding wires whereever necessary etc.

complete. (NOTE: Strctching length of one coil should not be more than

127 Self.Ex Providing and fixing 1.20 meter high fencing with 2.0 meter long M.S.

pl.114 angle post 40mm X 40mm X 6mm and oil painting 3 coats fixed at

mt.C/C. with five horizantal lines and two diagonals of galvanised steel

barbed wire of 'TATA make' weighing 9.38 Kg.per 100 meter, strained

and fixed to posts with G.I. staples, including fixing posts in ground

with 0.5 m X 0.5 m X 0.5 mt. block in C.C. 1:5:10 etc. comp. 0.00 409.00 R.M.

128 Self.Ex Providing and fixing 20 mm x 20mm x 10 gauge thick (using TATA

pl.115 make G.I.wire) galvanise ironwire mess (G.I. Crimped net) including

cutting fixing etc.complete. 0.00 590.00 R.M.

129 116 Providing corrugated G.I. Sheets of class-3 roofing fixed with

glavanished iron J or L Hooks, Bolts and nuts 8m diameter with

bitumen and G.I. limpet washer or G.I. limpet washer. filled with white

lead complete excluding the cost of purlins, Rafters and Trusses. (M.R)

(i) 0.80mm THick Sheet (TATA or Jindal Make) 2.50 734.19 S.M.

(ii) 0.63mm THick Sheet (TATA or Jindal Make) 2.50 1016.00 S.M.

m No. ITEM Qty. Rate Per Amount

130 117 Providing & fixing colouron galvaniced steel, zinc / aluminium allus

coated sheet 0.5 mm. thick roofing fixed with gslvanised grom J or L

hook bolts and bolt 8mm dia with bituman and impet washer filled with

white lead etc. Excluding the cost of purlins rafter and trusses.(TATA or

Jindal Make) 5.00 999.00 S.M.

131 118 Providing & fixing 150mm wide 450mm over all semicircular plain

G.I. sheet class-3 gutter with iron brackets 40mm x 3mm size

bolts, nuts, washers etc. including marking necessary connection

with rain water pipes.

(i) 0.8 mm thick 0.00 581.32 R.M.

132 119 Providing ridges or hips 600mm over all in plain G.I. sheet fixed with

G.I. "J" of "L" hooks bolts and nuts 8mm dia G.I. limpet and

bitumen washer complete (1) 0.80 mm thick 3.00 664.70 R.M.

133 120 Providing & Fixing UV stabilise FRP Sheet roofing with overlapping

the main cladding on both edges. All fixing holes must be predrilled

oversize as specified for the sheet length and fastener being used.

Fasteners must be fitted with approved washers. Fixings should be

tightened to ensure a weatherproof seal but they must not be over

tightened Side-lap fasteners must also be installed at specified centers

with the FRP sheet having clearance holes provided as per the main

fasteners Weatherproofing shall be provided at all flashing points under

the normal flashing by the fitting of a foam closure strip to match the

profile being used. Closure strips will be sealed to the sheet with an

appropriate non setting silicone sealant. Excluding the cost of purlins

rafter and trusses. (M.R)

(a) 1.5 mm thick 3.00 992.00 S.M.

(b) 2 mm thick 3.00 1100.00 S.M.

134 Self.Ex Providing & Fixing Polycarbonate sheet roofing with surface of the

pl.121 sheet is coated with an anti-UV Co-extrusion layer having good weather

resistance, it can maintain its optical properties and mechanical

performance for a long time. Fasting is usually done by screws. , The

fastening screws should be inserted about 500 mm apart and 300mm

apart Along the supporting internal purlin and edge pulin.All fixing

holes with diameter at least 2 mm larger than screw must be predrilled

into each screw location. The screws should be 6mm diameter with

length according to sheet thickness and corrosion resistant, with at

least heavy duty hot dripped galvanized or stainless steel. Excluding

the cost of purlins rafter and trusses. (M.R)

(a) 1.5 mm thick Solid Sheet 3.00 1261.00 S.M.

(b) 2 mm thick Solid Sheet 3.00 1510.00 S.M.

135 Self.Ex Pro.& fixing corrugated ACRYLIC COLOURED - 1.m mm roofing fixed

pl.122 with galvanized from 'J' or 'L' hook bolts & bolt 8 mm dia with bitumen

and Limpet washer filled with white \lead etc. comp. excluding the cost

of purlins rafter & trusses 3.00 500.00 S.M.

136 123, Providing and fixing rolling shutters of approved make made of 80 mm

124, wide M.S. laths inter locked together through their entire lenght and

125 jointed together at the ends by end locks mounted on specially

designed pipe shaft with bracket plates, guide channels and

arrangements for inside and outside locking with push-pull operation

including the cost of hood cover and spring etc. complete

(A) Shutters having width below 3.5 m 0.00 3554.40 S.M.

(B) Shutters having width 3.5 M and above 0.00 4546.01 S.M.

137 126 Providing & Fixing 80 mm dia M.S. pipe as vertical post are beded in

1:1.5:3 concrete also horizontaly in line and connecting to purline angle

etc by welding rereting etc. (a) Medium duty "B" Class 0.00 750.00 R.M.

138 127 Providing & Fixing 50 mm dia M.S. pipe as vertical post are beded in

1:1.5:3 concrete also horizontaly in line and connecting to purline angle

etc by welding rereting etc. (a) Medium duty "B" Class 0.00 485.00 R.M.

139 128 Providing & fixing black board on walls of 1.8mt.x1.2mtsize made up

to 12 mmth.B.W.P .Plywood (Brand Saras,Kitply,Uniply, Anchor,

Green,Wood Stock or century) fixed with teak wood beading of 65 mmx

50mm size, rubbing & sanding comp., incl. applying two coats of black

board paint over a priming coat on plywood & French polishing the

frame all round etc. Comp. as per instruction of Engineer in charge

140 129 Providing & Fixing Reading table size 8' x 4' and height 2'-6" with

table top 18mm thick (Brand Saras,Kitply,Uniply, Anchor, Green,Wood

Stock or century) commercial plywood with 1.0mm thick lamination

sheet fitting with teakwood moulding table top supported on 3" x 3"

teakwood leg & 3" x 11/2" teakwood framing top and bottom with french

polish labour work hardware etc. as per site in charge instruction and

as per drawing. 1.00 14774.00 No.

141 130 Providing & Fixing Librarian table with 18mm thick commercial

plywood (Brand Saras,Kitply,Uniply, Anchor, Green,Wood Stock or

century) )with 1.0mm thick lamination sheet table top supported on 2" x

2" teakwood leg & make 3 nos. drawers of 1' 3" width on both side with

necessary french polish hardware labour etc. as per site incharge

instruction and as per drawing (Size 4' x 2'-6" x 2'-6", all framing other

then legs are teak wood of size 2" x 1") 1.00 8390.00 No.

142 131 Providing & Fixing simple 12mm thick commercial plywood (Brand

Saras, Kitply,Uniply, Anchor, Green,Wood Stock or century) Rack of

size 6' x4' and depth 1'-6" 5 Nos. horizontal partition, supported 2" x

1" framing with necessary french polish hardware labour etc. as per site

incharge instruction and as per drawing. 1.00 7690.00 No.

m No. ITEM Qty. Rate Per Amount

143 132 Providing & Fixing fitting commercial 8mm thick plywood (Brand

Saras,Kitply,Uniply, Anchor, Green,Wood Stock or century) magazine

stand of Size 6' x 4' with 3" x 11/2" vertical supporting and adjustable

lag support and horizontal simple 2" x 1" teakwood patti for magazine

support with necessary french polish hardware labour etc.as per site in

charges instruction and as per drawing. 1.00 6745.00 No.

144 Self.Ex Labour work for chiesel shape(Bhala type) of grill square bar or Round

145 Self.Ex Providing & Fixing 8 mm dia Chain For Swing

146 Self.Ex Providing & Fixing Kada For Swing

147 Self.Ex Cutting out cracks of wall or terrace to V section ,cleaningout, grouting

pl.136 with cement and sand slurry 1:3 (1 cement : 3 sand ). at any height

148 Self.Ex Providing & fixing Wooden file storage/divider 7.00' height with all outer

pl.137 surface laminate finish using 18 mm th vertical,horizontal and shutter

selves commercial plywood approved make, 01 mm th SF finish

laminates,teakwood liping,brass hinges, ss handle lock,megnate &

necessary hardware materials etc.inside and liping franch polish finish

complete in all respects by Engineer in charge 1.00 407.00 Sq.ft.

149 Self.Ex Providing & fixing hard drawn wire fabrics 75 mm x 25 mm MESS of

pl.138 weight not less than 7.75 kg/s.m to windows/ventilators frames etc. at

all floor levels including 60 mm x 20 mm bidding of teakwood incuding

providing and fixing salwood frames 7 cm x 7 cm size for ventilators

For Ventilators all floor. 0.00 1342.00 S.M.

150 Self.Ex Applying polymer modify mortar in proportion at 1:2(one part cement:

pl.139 part white sand(sweet water) with chemical(SBR) dosage of minimum

litre pe bag of cement. Also apply bonding agent prior to polymer

modify mortar in proportion of (1:1)(1 part SBR : 1 part cement) using

Roof, MC and FOSROC

Beam / Columns 0.00 1830.00 S.M.

Ceiling 0.00 1830.00 S.M.

151 Self.Ex Crack Repairs:-Crack filling using fiber reinforced polymer modified

pl.140 mortar after openning crack in "V" grove, Making Surface dust free,

with a bond coat of polymer as per the data sheet for crack repairing

cracks less than 8mm 0.00 120.00 R.M.

152 141 Providing and fixing 150 mm wide, approved quality chicken wire mesh

(FRP / PVC)at junction of brick work and RCC work or two dissimilar

surfaces, at all heights fixed by nails, rowal plugs or tag by cement

mortar 1:3 before applying the plaster, including curing, scaffolding all

complete as directed.(M.R) 3.00 102.00 S.M.

153 142 Providing and filling Epoxy grout of approved or suggested brand by

consultant / Engineer in charge in 4mm to 6mm thick tiles joint

including spacer with cleaning of joint by vacuum or blower etc 0.00 40.00 R.M.

154 Self.Ex Providing and supplying Medium duty injection adhesive HY200 R for

pl.143 rebar fixing in Dry conditions for dia upto 32mm. Drilling hole to the

required depth by rotary hammer drill, cleaning with brush and jet of

clean air, filling resin and hardener with standard dispenser in hole and

then fixing the re-bar, The system should be made of two foils

consisting of resin and Hardener foil pack.The installation and the

setting instructions should be strictly followed as per the manufacturers

Recommendations.Reinforcements will be supplied free of cost at site.

(Pull out testing upto 1% of total rebar is to be produced by

manufacturer). as per specification given by HILTI

(D) 16 mmm dia 0.00 190.00 No.

155 144 Providing and fixing stainless steel ( Grade 304) railing made of Hollow

tubes, channels, plates etc., including welding, grinding, buffing,

polishing and making curvature (wherever required) and fitting the

same with necessary stainless steel nuts and bolts complete, i/c fixing

the railing with necessary accessories & stainless steel dash fasteners

stainless steel bolts etc., of

required size, on the top of the floor or the side of waist slab with

suitable arrangement as per approval of Engineer-incharge, (for

payment purpose only weight of stainless steel members shall be

considered excluding fixing accessories such as nuts, bolts, fasteners

156 145 Carring out plinth treatment to post construction / existing structure by

spraying chemical solution for termite control treatment including labour

and material consistment with ISI specification. Using Chlordene and

Chiorpurfiles 20 EC. As per 6131_paret-II Consentration Weight one

percent is recommended i.e. one litre 20 EC chemical emulsion with

liter give 1% concrentration inclusive of one litre chemical emulsion

appication at the rate of 5 litre chemical / Sqm of surface is

recommended as per IS. 15.00 87.03 S.M.

WATER SUPPLY & SANITARY ITEMS

m No. ITEM Qty. Rate Per Amount

157 146A Prov.& Fixing water closet squatting pan (Orissa type W.C.pan) at all

floor levels, size 500mm x 400 mm incl. 100 mm size "P'or "S" trap for

water closet squatting pan joining the trap with the pan & soil pipe in

C.M. 1:1 (1cement :1 fine sand) etc. Comp.(A) Vitreous china long

Make- Cera S3010109, Parry ware C0117CS/C0117* , Jaquar

,HindWare 20143 3.00 3277.39 No.

158 147 Providing and fixing Wash Down Water closet European type W.C.

pan with integral P or S trap including jointing the trap with soil pipe in

cement mortar 1:1 (1 cement : 1 find sand) (seat and cover to be

measured and paid for separately) (A) Viterous china pattern - I (i) in

approved colour 3.00 1356.81 No.

159 148 Providing and fixing Wash Down Water closet European type W.C.

pan with integral P or S trap with normal closing seat cover L bend

including jointing the trap with soil pipe in cement mortar 1:1 (1 cement

: 1 find sand) (A) Viterous china pattern - I

Make- Cera CONVENTIONAL B1510121 , Parry ware C0297*/ C0278,

HindWare sleek 20011, Jaquar- CNS-WHT-751P180SPPZ 3.00 3530.09 No.

160 149 Providing and fixing plastic seat and cover for wash down water

closet with C.P. brass hinges and rubber buffers (B) Black plastic seat

and cover. 3.00 291.33 No.

161 150 Providing & fixing wash basin with single hole for pillar tap at all floor

levels, with C.I. or M.S. Brackets painted white incl. cutting holes &

making good the same incl. fittings such as pillar tap, capstan head

screw down high pressure with screws, shanks & back nuts, C.P.

Brass waste trap, screw down stop tap 15 mm. dia. etc. complete.

(A) Vitreous china flat back wash basin 550 mm.x 400 mm. size in

approved colour For all Floor 3.00 2132.94 No.

162 150 Providing & fixing wash Hung basin with single hole for pillar tap, Size

550x400mm at all floor levels, with C.I. or M.S. Brackets painted white

incl. cutting holes & making good the same etc. complete. For all Floor

Make- Cera Cat. No. S2040121, Parry wareC0434* (CTH), Jaquar

SLS- WHT -6801 ,HindWare10004 3.00 3276.63 No.

163 151 Providing & fixing Urinal or approved quality including conecting the

Urinal with waste pipe, tap etc. complete. (A) White earthenware flat

back or corner type size 430 mm x 260mm x 350mm 3.00 1074.86 No.

164 152 Providing & fixing white viterious china Urinal of size 450 x 325 mm as

per IS-2556 (Part-2) with C.I. Hangers and 15mm dia. C.P. Spreader,

32mm dia CP bottle trap and pipe to wall with C.P. Flange complete

including cutting and making good the walls and floors wherever

Make- CeraCat. No. S4020103, Parry ware C0501*, Jaquar URS-WHT-

13261H ,HindWare BACK SMALL 60001 2.00 2535.70 No.

165 153 Providing & fixing of overhead shower 80 mm (3”) dia with 3 flow with

Overhead Shower arm 200 mm with wall flange complete

Make -Cera,Parry ware, Jaquar, Hindware 0.00 1526.42 No.

166 154 Providing & fixing 600 mm.x 450 mm. mirror of superior glass at all

floor levels, mounted on 6 mm. th. A.C. sheet or plywood sheet & fixed

to wooden plugs with C.P.brass screws and washers etc. For all Floor

167 155 Provinding and fixing Towel Ring fabricated from seamless stainless

steel tube 2mm thick in Bath room with polished wall flange at end of

bars with heavy duty anchor fasteners & accessories

Make -Cera,Parry ware, Jaquar, Hindware 0.00 924.24 No.

168 156 Providing & fixing S.S. Towel Rail of 600mm Long approved make

including, provinding & fixing C.P. Brass screws, making holes in wall &

Make -Cera,Parry ware, Jaquar, Hindware 0.00 1100.42 No.

169 157 Providing & fixing stainless steel recessed type Soap Dish of approved

make. Including providing & fixing screws, washers, cutting & making

good the walls.

Make -Cera,Parry ware, Jaquar, Hindware 2.00 839.91 No.

170 158 Providing & fixing Health Faucet ABS Body with wall Hook & 1 Meter

Chrome plated PVC Hose Pipe.

Make -Cera,Parry ware, Jaquar, Hindware 3.00 1009.90 No.

171 Self.Ex Providing & Fixing Hand Shower at all floor levels,

pl.159 of approved quality including fixing etc. Complete

Make -Cera,Parry ware, Jaquar, Hindware 0.00 1800.00 No.

172 160 Prov. & Fixing S.W. Gully trap with C.I.grating brick masonary (C.M

1:5)chamber & water tight C.I. cover with frame of 300mmx300mm size

(inside) with weight includ. plastering smooth inside & outside 15mm.

th' in C.M.1:3 etc. comp. (i) Square mouth traps---

(A) 100mm x 100mm Size -P type 0.00 1292.19 No.

(B) 150mm x 100mm Size- P Type 0.00 1246.92 No.

173 161 Prov. & Fixing S.W. Gully trap with C.I.grating brick masonary (C.M

1:5)chamber & water tight Pre cast R.C.C. cover of 300mmx300mm

size (inside) includ. plastering smooth inside & outside 15mm. th' in

C.M.1:3 etc. comp. (i) Square mouth traps---

(A) 300mm x 300mm Size -P type 0.00 1098.05 No.

(B) 150mm x 100mm Size- P Type 0.00 1052.77 No.

m No. ITEM Qty. Rate Per Amount

174 162 Prov. & Fix. 10 cm.x15 cm.(4" x 6") S.W. trap with Inside dimension

,455 x 610 mm & 450 mm deep sewer trap chamber with 23 cm th'

B.B. masonary walls in C.M 1:5 with cement plaster 15 mm th' in C.M.

1:3 inside & outside to exposed faces, R.C.C. top slab with 1:2:4 mix (

1 cement: 2 Sand : 4 Grade stone aggregate 20mm size) ,Foundation

concrete 1:5:10 & fixing C.I. cover with frame to be not less than 38 kg.

On top etc. comp. for single pipe.

.(A).Same as above but Precast RCC heavy duty Cover instead of C.I.

Cover 0.00 2915.61 No.

Extra for every additional depth of 0.1 mt beyoung 0.45 mt 0.00 233.85 Each

175 163 Providing & construction simple chamber of 23 cm. th' B.B. Masonary

in C.M 1:5 with cement plaster 15 mm th' in C.M. 1:3 inside & outside

to exposed faces, R.C.C. top slab with 1:2:4 mix ( 1 cement: 2 Sand :

Grade stone aggregate 20mm size) ,Foundation concrete 1:5:10 &

fixing C.I. cover with frame to be not less than 38 kg. On top etc. comp.

Inside dimension,455 x 610 mm &450 mm deep for single pipe

.(A).Same as above but Precast RCC heavy duty Cover instead of C.I.

Cover 1.00 2681.76 No.

Extra for every additional depth of 0.1 mt beyoung 0.45 mt 0.00 242.39 Each

176 164 Providing, Lowering & laying joining R.C.C. NP2 CLASS Pipe In C.M.

1:1 of following nominal internal diameters incl. Testing of pipes and

joints etc. Comp

177 165 Providing & laying in trenches galvanised mild steel tubes (medium

grade) TATA / ZENITH / ASIAN / JINDAL MAKE of the following

nominal bore & tube fittings etc. comp..-

178 166 Providing & Fixing to wall, ceiling floor at all floor levels, galvanised

mild steel tubes(medium grade) TATA / ZENITH / ASIAN / JINDAL

MAKE of the following nominal bore, tube, fittings & clamps incl.

making good the wall ceiling and floor etc. complete.

179 167 Providing & Fixing C.P. Brass screw down bib tap at all floor levels,

polished bright etc. comp.-(A) 15mm dia. For all Floors 10.00 186.83 No.

180 168 Providing and fixing 15mm Dia bib tap with wall Flange at all floor

levels,polished bright etc. Comp.

Make -Cera,Parry ware, Hindware ,JAQUAR 3.00 1353.77 No.

181 169 Providing & Fixing gun metal check or non return full way wheel

valve at all floors levels, etc. complete.

182 170 Providing & Fixing chromium plated brass half turn flush cock at all

floor levels, of approved quality incl. fixing in pipe line etc. Comp.

183 171 Providing & Fixing abonite ball cock of approved qualities directed

184 172 Providing & fixing Metropole flush valve with wall flange 25mm with

lever Knob at all floor levels, of approved quality incl. Fixing in pipe line

Make -Cera,Parry ware, Jaquar, Hindware 4.00 1690.00 No

185 173 Providing Flush Cock consisting lever, cartridge sleeve & flange &

Make -Cera,Parry ware, Jaquar, Hindware 4.00 2056.47 No.

186 174 Providing & fixing 15mm C.P. Brass angle valve (stop cock) with C.P.

Copper connecting pipe 450mm long and nuts, washer and brass

flange complete, including cutting and making good the wall where

Make- Cera F1020362, Parry ware T0712A1, HindWare Cat. No.:

187 Self.Ex Pro. & Fix. Pilarcock with connection pipe at all floor level etc. comp.

188 176 Providing and fixing C.P. Brass pillar cock with copper connection

,C.P. Brass screws complete

Make -Cera,Parry ware, Hindware ,JAQUAR 3.00 1457.97 No.

189 Self.Ex Providing and fixing waste Pipe for Washbasin or sink (A) 32 mm Dia 10.00 99.08 No.

190 Self.Ex Providing & Fixing PVC West Cuplin at various places at all floor

pl.178 approved quality as directed By Eng.in charge. 3.00 60.50 No.

191 Self.Ex Providing & Fixing S.S. West Cuplin at various places at all floor

pl.179 approved quality as directed By Eng.in charge. 3.00 93.50 No.

192 Self.Ex Providing and fixing Supply Pipe for Washbasin or sink

193 Self.Ex Providing and fixing Jet Sprey Cock at all floor level etc. complete.

m No. ITEM Qty. Rate Per Amount

194 Self.Ex Providing and fixing garden hose pipe with 15 mtr length of approved

pl.182 quality :

195 Self.Ex Providing & Fixing Brass Tee at all floor levels, of approved quality

pl.183 including fixing etc. Complete

196 Self.Ex Providing & Fixing U.P.V.C Tee at all floor levels, of approved quality

pl.184 including fixing etc. Complete

197 Self.Ex Providing & Fixing U.P.V.C Alba at all floor levels, of approved quality

pl.185 including fixing etc. Complete

198 Self.Ex Providing and fixing chromium plate bottle trap with necessary coupling

pl.186 of approved quality for wash- basin 0.00 331.28 No.

199 Self.Ex Providing & Fixing Water proof M-Seal at various places approved

pl.187 quality as directed By Eng.in charge. 0.00 176.00 No.

200 Self.Ex Providing and fixing

pl.188 (A) 40 mm thick RCC cover for simple chamber,s.w.trap & tank Top 3.00 400.00 No.

(B) PVC water tank cover upto 2000 Lit. 3.00 200.00 No.

201 Self.Ex Supplying and fixing C.I. cover 300 mm X 300mm. without frame for

pl.189 gully trap (standard pattern) the weight of cover to be not less than

202 190 Providing and fixing C.I. Manhole cover 0.60 x 0.45 mt. Size having

weight not less than 35 Kg. etc. complete. 0.00 958.17 No.

203 Self.Ex Providing & Fixing R.C.C.Manhole Cover

204 192 Providing & Fixing U-PVC pipe (SWR) confirming to IS no.

(Type "B") of Prince/Supreme/Jain/Astral/Tulsi make for soil and waste

discharge system at all floor levels incl. All fixtures like bends, tees,

shoe etc. jointed with resin of approved brand & manufacture etc.

205 192A Providing & fixing U-PVC pipes Confirming to IS no. 13592 (Type "A")

of Prince/Supreme/Jain/Astral/ Tulsi make for rain water at all floor

levels incl. fixtures like bends, tees, shoe etc joined with resin of

approved brand & manufacture etc. comp. (M.R.) .

206 193 Providing, Laying and jointing on true line and level UPVC pipe (SCH-

40) line of Prince/Supreme/Jain/Astral/ Tulsi/Finolex make including

fittings make or equivalent as approved by angineer-in-charge. Pipe

shall be fixed on the wall the help of clamp at every two meter C/C or

shall be concealed as directed including necessary fittings etc.

including testing of pipe and joints and fixing the same with adhesive

solvent, including cost of all materials.

207 194 Providing & Fixing P.V.C. pipes (SCH-80) of Prince/ Supreme/ Jain/

Astral/ Tulsi/Finolex make for water supply line at all floor levels incl.

fixtures like bends, tees, shoe etc joined with resin of approved brand

& manufacture etc. comp. Pipe shall be fixed on the wall the help of

clamp at every two meter C/C or shall be concealed as directed

including necessary fittings etc. including testing of pipe and joints and

fixing the same with adhesive solvent, including cost of all materials.

208 195 Providing and fixing PVC SWR Nahni trap IS 14735 for drain - 110x110

mm diameter with jali of the following nominal diameter of self cleaning

design with C.I. scread down or hinged grating including the cost of

cutting and making good the walls. 3.00 586.27 No.

209 Self.Ex Providing and fixing 100x 100 mm Size P.V.C /C.I Greting (Jali ) for

pl.196 Nani Trap. 3.00 43.63 No.

210 197 Providing & Fixing in position PVC Cowl vent to pipes of

Prince/Supreme/Jain make etc.Comp.

m No. ITEM Qty. Rate Per Amount

211 197A Providing & fixing M.S. Holder Bat clamps at all floor levels of

approved design to C.I. Or S.C.I pipes including the cost of cutting

holes & making good the wall etc. Complete - 100 mm. dia. (M.R.) 0.00 30.00 No.

212 198 Providing & fixing G.I./Aluminum Patti clamps at all floor levels of

approved design to C.I. Or S.C.I pipes including the cost of cutting

holes & making good the wall etc. Complete - 100 mm. dia. (M.R.) 30.00 20.00 No.

213 199 Providing & fixing Z - clamps at all floor levels of approved design to

C.I. S.C.I. or PVC pipes including the cost of cutting holes & making

good the wall etc. Complete - 100 mm dia as per architect instructions.

(C) 110 mm dia to upto 150 mm dia 2.00 90.00 No.

(D) 150 mm to 200 mm dia 1.00 98.00 No.

214 200 Providing & Fixing Kathi around the vertical PVC drainage pipes for

concealing with cement plaster 20 mm avg thickness(CM 1:3 [1 cement

:3 coarse sand]) finishing as per instruction given by Eng. incharge. for

(A) 75 mm PVC PIPE 3.00 173.00 R.M.

(B) 100 mm /110 mm PVC PIPE 20.00 180.00 R.M.

215 201 Providing erecting and fixing double coated Syntex/Super/Reno PVC 4000.00 3.95 Lit.

(ISI) mark water tank of required capacity each with all necessary

fittings & connection etc. complete on terrace.

216 202 Providing & laying ordinary C.C.1:1.5:3 mix for R.C.C. work incl. boxing,

centering, vibrating, curing & mixed with approved water proofing

cement compound or "CEMWET"or"PIDICRETE LW"integral water

proofing admixture as water proofing agent to be mixed with 50 kg.

cement bag shall be as recommended by the manufacture of the water

proofing material, concrete work for top, bottom slab & side pardi for

Under ground Tank & Item incl. Necessary excavation & refilling the

available earth, 15 cm th' C.C 1:4:8 for bedding concrete, Half B.M. in

C.M. 1:4 outside wall, inside R.C.C. pardi as per design, 10mm.th.

water proofing cement plaster in C.M. 1:3 with smooth

finishing,watering etc.Comp.to all inner face & bottom of tank curing

etc. comp. incl. Locking arrangement, outlet, inlet, overflow & wash out

pipe arrangement as necessary & C.I. Cover 0.60 x .045 weight not

less then 35kg. etc. com. as per structural drawing excluding Steel & as

directed by Engineer-in-charge

Underground tank 0.00 6.87 Lit.

217 203 Providing & Laying Commercial Quality white glazed tiles 6mm. th.

in flooring laid on a bed of 20 mm. Av. Th.C.M.1:3(1cement :3 sand ) &

on wall Of R.C.C. Tank with necessary cement paste for fixing and

joined with white cement slurry etc. complete. finished with flush

pointing in white cement etc.com. 0.00 0.90 Lit.

218 204 Providing and filling in depressions of Bath and W.C. At all floor

levels, after completing plumbing work of pans, pipes,traps etc.with

cinder or fly ash as directed by Engineer in charge etc. comp. 1.00 500.00 C.M.

219 204A NOTE :- (1) The whole work is to be executed through specialized

agency with a guarantee of 10 (Ten) years given on a prescribed

proforma duly stamped (2) The rate shall include for work at all floors &

conducting water proof test as directed. (M.R.)

(A) Providing and laying water proofing treatment to vertical and

horizontal surfaces of depressed portions of W.C.,kitchen and the like

consisting of :

(a) I course of applying cement slurry @ 4.4 kg/sqm mixed with water

proofing compound conforming to IS : 2645 in recommended

(b) II course of a layer of plaster in C.M. 1:3 with water proofing

compound confirming to IS:2645 about 25 mm. th' in the floor of the

depression & about 18mm th' On the side walls of the depression up

to the floor level, water proofing plaster about 18 mm. th' be continued

on the walls above the floor level for a height of 600 mm. with surface

suitable to receive further treatment

(c) Finishing top with stone aggregate 10mm to 12mm nominal size

spreading @0.008 C.M./S.M., thoroughly embedad in plaster layer.

as per specifications & instructions of Engineer in charge (Cement 0.00 296.00 S.M.

consumption 0.316 Bags / S.M.)

m No. ITEM Qty. Rate Per Amount

(B) Providing and laying integral cement based water proofing

treatment including preparation of surface as required for treatment of

roofs, balconies, terraces etc. consisting of following operations.

(a) Applying and grouting a slurry coat of neat cement using

kg/sqm of cement admixed with proprietary water proofing compound

comforming to IS:2645 over the R.C.C. slab including cleaning the

surface before tratment.

(b) Laying cement concrete using broken bricks/brick bats 25 mm to

100 mm size with 50% of cement mortar 1:5 (1 Cement : 5 Coarse

sand) admixed with proprietary water proofing compound conforming to

IS:2645 ,brick bats is finally covered by jointless cement plaster 20mm

th. in C.M. 1:4 added with special water proofing compound confirming

to IS:2645 & top smooth finished with trowel with false chequered

marking of 300 mm.size.The treatment is carried along the vertical

surface of the parapet & other adjoining wall up to height of about

mm in a shape of quarter round vata Incl. curing etc. Comp. With

average thickness of 120 mm and minimum thickness at khurra as

(c) The whole terrace so finished shall be flooded with water for a

minimum period of two weeks for curing and for final test. All above

operations to be down in order and as directed and specified by the

engineer-in-charge. With average thickness of 120 mm and minimum

thickness at khurra as 65 mm. (Cement consumption 0.511 Bags /

220 204B Proiding & laying water proofing treatment to vertical and horizontal

surfaces like consisting of (a) I course of applying cement slurry 4.4 kg

per sq.mt. mixed with water proofing compound confirming to IS:2645

in rcommended proportions. (b) II corse of 20mm cement plaster 1:3

mixed with water proofing compound in recommended proportion (c) III

course of applying blown or / resideal bitumen applied hot at 1.7 kg per

sqm of area. (d) IV course of 400mm micron th. PVC sheet. (Overlaps

at joints of PVC sheet should be 200mm wide and pasted to each other

with bitumen about 1.7 kg./ sqm.)

221 Self.Ex Pro & Const. water Proofing Cement vata of 10 cm size in C.M 1:1

pl.205 etc complete. 3.00 22.60 R.M

222 206 Providing & fixing G.I. Rain water spout of 50 mm.dia & 30 cm length

223 Self.Ex Chemical treatment of DR.FIXIT brand for various required surfaces

224 208 MARBLE PASTE WATER PROOFING TREATMENT (Layer-1 (Liquid

Form) White Cement, SBR(Dr.Fixit),Bulbond (Synthetic Resin

Adhesive), Crack Sill Powder, Water.

Layer-2: (Paste Form) Marble Powder, Marble Paste

Liquid,Bulbond,Water.

Layer-3(Liquid Form) Asian Paint,Smart Care Damp Proof,Water Etc.)

NOTE :- (1) The whole work is to be executed through specialized

agency with a guarantee of 05 (Five) years given on a prescribed

proforma duly stamped (2) The rate shall include for work at all floors &

conducting water proof test as directed. (M.R.) 2.00 27.00 S.ft

225 209 Dismentaling Old Partition & Ceilling with all lead and lift, labour,

Transportation etc. incl all 10.00 350.00 SM

226 210 Cutting & Refixing Aluminium partly glazed and partly paneled

partition/Door using available material incl all hardware, material &

labour etc. incl all 10.00 350.00 SM

Providing & Fixing Wooden Floor incl. all material & labour etc. incl all

228 212 Providing & Fixing Woolen Carpet at Floor with all material & labour

etc. incl all 5.00 1044.00 SM

229 213 Providing & Fixing 12mm Bison Panel, 50mm Thick Rock Wool & 4mm 10.00 6374.00 SM

Thick ACP Panel at Glass Wall Side with all material & labour etc. incl

230 214 Supply & Fixing of 16mm.th.Armstrong classic Lite square edge

mineral fiber celling with 24mm grid (local) G.I. Frame grid consist of

600mm x 600mm. tecno grid pre coated main runner 38 x 24 x3600

mm, cross T 30 x 24 x 1200 mm,cross runner 24 x 24 x 600mm, wall

Angle 24x24 mm. required length suspension wire of 2.50mm G.I.&

necessary hardware etc.

comp. approved by engineer-in-charge 20.00 980.00 SM

231 215 Providing & Fixing 50mm S.S. Pipe, Hand Railing With all Hardware

including Labour, etc. 50.00 1560.00 Rmt.

232 216 Providing & fixing White board on walls of 1.8mt.x1.2mt size of 12mm

thick with appropriate fittings and Alluminium fittings comp., as per

instruction of Engineer in charge (M.R.) 1.00 4230.00 No.

233 217 Hoarding Printing and Mounting 10.00 16.50 Sft.

234 218 Flex Banner (Any size 240 gsm) 1.00 8.50 Sft.

235 219 Flex Banner with MS (Mild Steel) framing (Any size 240 gsm (Pipe size

236 220 Cloth Banner (Upto 8 x 4 feet 140 gsm) 1.00 23.60 Sft.

237 221 Cloth Banner with MS (Mild Steel) framing (Up to 8 x 4 feet 140 gsm)

(Pipe size 25 x 25 x 1.5 mm) 1.00 65.00 Sft.

m No. ITEM Qty. Rate Per Amount

238 222 Cloth Banner with Wooden stick at both end for rally display (Any size

Cloth banner standee (Any size 140 gsm Pipe size 25 x 25 x 1.5 mm)

240 224 Wall Vinyl Sticker 1.00 28.00 Sft.

241 225 Eco Solvent Vinyl Sticker (120 gsm) with Lamination (100 gsm) 1.00 38.00 Sft.

242 226 Solvent Vinyl Sticker (120 gsm) with Lamination (100 gsm) 1.00 22.00 Sft.

243 227 5mm PVC sheet Eco Vinyl (Any size) 1.00 55.46 Sft.

244 228 Decorative theme base designing & painting with all waterproof

materials 1.00 63.00 Sft.

245 229 Providing and laying chequered precast concrete tiles 22mm thick with

aggregate of sizes upto 6mm in floors treads of steps and landing on

20mm thick bed of C.M. 1:6 (1 cement : 6 sand) or L.M. 1:1.5 (1 Lime

putty : 1.5 sand) jointed with neat cement slurry with pigments to match

the shade of the tiles. 1.00 545.76 S.M

246 230 Providing and applying cement mortar (1:3) modified by using

polymer and expanding grout additives in required thickness for

repair/strengthening of various RCC elements at all floor levels, lead,

lift, including breaking, chipping, dismentling existing cover concrete

and exposing existing reinforcement, applying wirebrush for making

surfaces of steel and concrete free from rust and other loose materials,

applying rust removing chemical on existing reinforcement, applying

anticorrosive coating on existing reinforcement, applying polymer

bonding agent on existing concrete surfaces before applying polymer

modified mortar in specified thickness as directed by the Engineer-in-

The rates shall include providing and applying 12 mm thick cement

mortar (1:4) modified with plasticizer for finishing smooth the repaired

surfaces, providing and applying curing agent on the repaired surfaces,

etc. complete as directed by the Engineer-in-charge. The make and

quality of rust removing chemical, anti-corrossive coating, polymer

bonding agent, polymer and expanding grout additives, plasticizer,

curing agent, etc. shall be approved by engineer-in-charge. The

procedure for application shall be strictly in accordance with

manufacturer's detail specification, which shall be submitted before

start of work and shall be approved by the Engineer-in-charge.

The rates shall include the cost of providing, erecting and maintaining

leakproof shuttering /formwork /scaffolding, etc. to be used for the

purpose, providing and erecting props, temporary frame work and

maintain them in position for required time, to existing load bearing

elemnts for reliving loads coming on to structural members being

repaired/strengthened but excludes the cost of reinforcement.

Chemical use BASF, Sunanda, Fosroc, Pidilite etc as per Approved by

Engineer-in-charge

Beams / Column / Ceiling

50 mm thickness 0.00 2474.65 S.M.

247 231 Providing and applying cement mortar 1:4 enriched with expanding

grout additive in required proportion in cement for repair of cracks in

RCC and Non-RCC members after making 25mm x 25mm groove,

cleaning the surface and applying coat of bonding, finishing smooth the

repaired surfaces, providing and applying curing agent on the repaired

surfaces, etc. complete at all floor levels as directed by engineer-in-

charge. The make and quality of expanding grout additives, bonding

agent, curing agent, etc. shall be approved by the engineer-in-charge.

The procedure for application shall be strictly in accordance with

manufacturer's detail specification, which shall be submitted before

start of work and shall be approved by the Engineer-in-charge.

248 232 Providing Cement Concrete work 50% - M30-(design mix) and 50%

micro concrete plus recron - 3s (12mm long polyester fiber) plus

appropriate dose of super plasticizer with curing, finishing

smooth, etc. complete for jacketing of structural members at all

floor levels, lead, lift, including breaking, chipping, dismentling existing

loose cover concrete and exposing respective existing reinforcement

as directed by the engineer-in-charge, applying wirebrush for making

surfaces of steel and concrete free from rust and other loose materials,

applying rust removing chemical on existing reinforcement, applying

anti-corrosive coating on existing reinforcement, applying polymer

treatment and bonding agent on existing concrete surfaces as directed

by the Engineer-in-charge, etc. complete. The make and quality of rust

removing chemical, anti-corrossive coating, polymer / epoxy bonding

agent shall be approved by engineer-in-charge. The procedure for

application shall be strictly in accordance with manufacturer's detail

specification, which shall be submitted before start of work and shall be

approved by the Engineer-in-charge.

m No. ITEM Qty. Rate Per Amount

The rates shall include the cost of providing, erecting and maintaining

leakproof shuttering /formwork /scaffolding, etc. to be used for

concreting, providing and erecting props, temporary frame work and

maintain them in position for required time, to existing load bearing

elemnts for reliving loads coming on to structural members being

repaired/strengthened but excludes the cost of reinforcement. The rate

shall also include required breaking of adjoining RCC structural

elements like slab, beam, etc. and reinstating the same in original

shape and size by using above mentioned procedure and material, as

directed by the Engineer-in-charge, etc. complete.

If required all loose cover concrete shall be removed as directed by the

engineer-in-charge.

Any other work which may get disturbed due to above mentioned

procedure shall be repaired and reinstated to original condition to the

complete satisfaction of the Engineer-in-charge and NOS claim for

extra payment for the same shall be entertained.

chemical use BASF, Sunanda, Fosroc, Pidilite etc as per Approved by

engineer in-charge

249 233 Providing Cement Concrete work 75% - M30-(1:1:2) by weight mix

and 25% micro concrete by weight plus recron - 3s or equivalent

(12mm long polyester fiber) plus appropriate dose of super

plasticizer (as per manufacturers spacification and approved by

consultant) with curing, finishing smooth, etc. complete for

jacketing of structural members at all floor levels, lead, lift, including

breaking, chipping, dismentling existing loose cover concrete and

exposing respective existing reinforcement as directed by the engineer-

in-charge, applying wirebrush for making surfaces of steel and concrete

free from rust and other loose materials, Providing and Applying a rust

removing, chloride and sulphate free non-alkaline, inorganic nano film

forming surface passivating solution conforming to IS 9077 Rust

remover & passivater of approved brand by brush or cotton swab to the

existing reinforcement bars. Chemical should react with corrosion

products to convert them to a stable passivating naNOS-film on the

surface of the steel and return the steel back to its original greyish

white colour and special surface acting chemicals help in promoting the

adhesion of consequent coatings to the steel surface. Further the

coating should be NOSn-alkaline so as to remove any water soluble

salts especially corrosion inducing chlorides and the formation of the

passivating film prevents flash rusting between the rust removal and

the primer application.

Cleaning the surface after 24 hrs of chemical application, to remove

detached rust deposits. Ensure that the steel surface is rust free.,

Providing and applying Rust preventing anticorrosive coating (As per

manufacturer specification) over steel free from rust. Apply this slurry

over steel and allow it to cure for at least 6 hours. Similarly Applying

second coat of Rust preventing anticorrosive coating over steel and

allow it to cure, Applying bonding coat of approved make to the entire

damaged surface on existing concrete surfaces as directed by the

Engineer-in-charge, etc. complete. The procedure for application shall

be strictly in accordance with manufacturer's detail specification, which

shall be submitted before start of work and shall be approved by the

Engineer-in-charge.

The rates shall include the cost of providing, erecting and maintaining

leakproof shuttering /formwork /scaffolding, etc. to be used for

concreting, providing and erecting props, temporary frame work and

maintain them in position for required time, to existing load bearing

elemnts for reliving loads coming on to structural members being

repaired/strengthened but excludes the cost of reinforcement, Shear

connector and plaster . The rate shall also include required breaking of

adjoining RCC structural elements like slab, beam, etc. and reinstating

the same in original shape and size by using above mentioned

procedure and material, as directed by the Engineer-in-charge, etc.

If required all loose cover concrete shall be removed as directed by the

engineer-in-charge.

Any other work which may get disturbed due to above mentioned

procedure shall be repaired and reinstated to original condition to the

complete satisfaction of the Engineer-in-charge and NOS claim for

extra payment for the same shall be entertained.

m No. ITEM Qty. Rate Per Amount

250 234 Carrying out Injection grouting for cracks in RCC structural members by

drilling holes of 15 mm diameter upto minimum depth of 75 mm, fixing

aluminium nozzle / rubber pipe using cementitious compound, injecting

polymer modified slurry (SBR+cement+water) 1:1:1 material at

specified pressure with grouting pump till it the material refuses to

impregnate inside the hole. If required or suggested by the Engineer-in-

charge, injection grouting shall be carried out more than once for a hole

to assure proper spreading of grout material and filling of capillaries /

voids within the element. After satisfactory injection grouting, the

nozzle/pipe shall be cut and sealed by non-shrink epoxy putty. The

surface shall be finished smooth with C:M (1:4) and reinstated to the

original condition as directed by the Engineer-in-charge.

The rate shall include the cost of providing and supplying all tools,

materials, labour, scaffolding, props, formwork, etc. complete. The

make and quality of epoxy grout, epoxy putty, etc. shall be approved by

the Engineer-in-charge. The procedure for application shall be strictly in

accordance with manufacturer's detail specification, which shall be

submitted before start of work and shall be approved by the Engineer-in-

charge. (Actual no of holes and their locations shall be as decided by

the Engineer-in-charge)

chemical use BASF, Sunanda, Fosroc, Pidilite etc as per Approved by

engineer incharge

251 235 Carrying out Injection grouting for cracks in RCC structural members by

drilling holes of 15 mm diameter upto minimum depth of 75 mm, fixing

aluminium nozzle / rubber pipe using non-shrink epoxy putty, injecting

epoxy grout material at specified pressure with grouting pump till it the

material refuses to impregnate inside the hole. If required or suggested

by the Engineer-in-charge, injection grouting shall be carried out more

than once for a hole to assure proper spreading of grout material and

filling of capillaries / voids within the element. After satisfactory injection

grouting, the nozzle/pipe shall be cut and sealed by non-shrink epoxy

putty. The surface shall be finished smooth with C:M (1:4) and

reinstated to the original condition as directed by the Engineer-in-

The rate shall include the cost of providing and supplying all tools,

materials, labour, scaffolding, props, formwork, etc. complete. The

make and quality of epoxy grout, epoxy putty, etc. shall be approved by

the Engineer-in-charge. The procedure for application shall be strictly in

accordance with manufacturer's detail specification, which shall be

submitted before start of work and shall be approved by the Engineer-in-

charge. (Actual no of holes and their locations shall be as decided by

the Engineer-in-charge)

chemical use BASF, Sunanda, Fosroc, Pidilite etc as per Approved by

engineer incharge

252 236 Providing and applying thixotropic Making up lost section of concrete /

mortor with thixotropic repair mortor of one-component, normal-setting,

shrinkage-compensating, thixotropic mortar for layers up to 20 mm

thick. Supply and application of one-component, normal-setting,

shrinkage-compensating thixotropic mortar made from cementitious

binders, selected aggregates, special additives and synthetic

polyacrylonitrile fibres, for reconstructing deteriorated concrete

structures. Apply the mortar after adequate preparation of the substrate

by removing all deteriorated concrete to form a sufficiently-rough, solid

substrate with no detached portions. Clean the steel reinforcement

down to bare metal and apply a passivating treatment by brush-

applying two coats of one-component, anti-corrosion cementitious

mortar. Apply the product by trowel or spray with a continuous-feed

rendering machine on a clean substrate saturated with water in layers

up to 20 mm thick.

To improve expansion in the open air during the first few days of curing,

add a special curing additive when mixing the mortar to reduce both

plastic and hydraulic shrinkage at a dose of 0.25% in weight on the

weight of the mortar. The product must comply with the minimum

requirements of EN 1504-3 for structural mortars and have the

following performance characteristics:

Compressive strength (EN 12190) (MPa):> 40 (after 28 days), Flexural

strength (EN 196/1) (MPa): 7 (after 28 days), Compressive modulus of

elasticity (EN 13412) (GPa): 25 (after 28 days) Adhesion to substrate

(EN 1542) (MPa):> 2 (after 28 days), Capillary absorption (EN 13057)

(kg/m²•h0.5): < 0.20, Thermal compatibility measured as adhesion

according to EN 1542 (MPa): – freeze-thaw cycles with de-icing salts

(EN 13687/1): > 1.5 (after 50 cycles), Storm cycles (EN 13687/2):>

(after 30 cycles), dry thermal cycles (EN 13687/4):> 1.5 (after

cycles), Reaction to fire (EN 13501-1) (Euroclass):1

m No. ITEM Qty. Rate Per Amount

Consumption (per cm of thickness) (kg/m²): approximately 18.5 Kg

included and calculated in the price for work carried out according to

specification: (1) hydro-cleaning of adhesion surfaces and saturation of

substrate with water immediately before applying the mortar; (2)

application of the mortar by trowel or spray around steel reinforcement;

(3) levelling off surfaces with a straight edge and final tamping; (4)

careful curing of the mortar by spraying on water for at least 7 days

(3times) after application.

20 MM THICK 1.00 2460.00 S.M.

40 MM THICK 10.00 4460.00 S.M.

Sign of Contractor Executive Engineer

South West (Athwa) Zone

Surat Municipal Corporation