Loading
Loading…
Loading…
Tender Value
₹6.2 L
EMD Value
₹12,355
Closing Date
5 Sept 2026, 11:00 am
Executive Engineer
JSV Divn Indora
tube well at Surajpur Upperla (Malot) in Tehsil Indora Distt. Kangra (H.P.).
2026_HPIPH_142076_3
EE-JSV-NIT-3795-3825 dt 26-08-2026
Open Tender
Civil Works
Item Rate
Indora
Please refer Tender documents.
3 documents required · 3 mandatory
₹350
₹12,355
26 Aug 2026
26 Aug 2026
5 Sept 2026
26 Aug 2026
5 Sept 2026
26 Aug 2026
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1 | Transportation of Suitable Truck Mounted DTH and ODEX / Percussion Calyx / RC drilling rigs along with necessary accessories etc to the site of work and errection of rig including levelling etc. complete in all respects as per the directions of the Engineer - in - Charge. | 1 | Each | 107 | ₹107 |
| 2 | Drilling Bores of 200 mm dia as per IS 2800-1979 from ground level in the overburden as per direction of the Engineer-in-Charge / hydrogeologist with suitable rigs for drilling through rocky formation consisting of sand stone, limestone, dolomites, congiomerate, boulder pebble, gravats, silt, clay or any other type of sedimentary, metamorphic and igneous rocks including cost of attachements consumables stores bils, water, POL etc complete in all respect as detailed below:- | 90 | P/Rmt. | 108 | ₹9,720 |
| 3 | Collection and Preservation of soil samples in polythene bags complete in all respects as per the directions of the Engineer - in -Charge. | 1 | Each | 109 | ₹109 |
| 4 | Supplying and Lowering IS marked 175 mm nominal bore 6 mm thick MSERW casing plain end casing pipe as per IS 4270 - 2001 with upto date amendments in a length of 3.00 metres including cost of cutting welding, transportation charges complete in all respect as per directions of the Engineer-in-Charge. The pipe shall be slotted at a suitable interval thickness 6 mm. | 78 | P/Rmt. | 110 | ₹8,580 |
| 5 | Providing slotting arrangements as per IS 8110/1994-997 slot size 1.57X75 mm & Lowering of 175 mm dia MS pipe as per IS 4270-2001 with upto date amendments, welded and joints in to bore hole in verticle position including cost of all cutting threding & welding of pipe etc. with in all leads & lifts complete in all respect for the bore drilled by RC rig, as per direction of Engineer-in -Charge. | 12 | P/Rmt. | 111 | ₹1,332 |
| 6 | Development of Bore Well and yield testing with 1000 -CFM air compressor through V notch and disinfection etc. complete in all respects as per IS-2800-1979 including transportation of eqiupment and as per directions of the Engineer - in - Charge. | 4 | P/Hrs | 109 | ₹436 |
| 7 | Development/Satablishment of discharges of bore well and yield testing with Submersible pump set through V-notch as per IS 2800-1979ransportation of equipment etc. to the site of work complete in all respect for the bore drilled by RC rig as per direction of the Engineer-in-charge. | 4 | P/Hrs | 110 | ₹440 |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.43 MB
BOQ_210932.xls
BOQ • 0.23 MB
forms.pdf
Tender Documents • 2.26 MB
terms.pdf
Additional Documents • 0.17 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at [email protected].