Construction of Office Building over Existing Godown Structure to accommodate accommodations to Secretary Staff Chairman Room and Meeting Hall at AM Yard PLPurm of AMC Payakaropeta in Anakapalli District

Earth work excavation for foundations and depositing on bank for all lifts and with an initial lead of 10m including all operational, incidental, labour charges such as shoring ,sheeting, planking, strutting, etc. complete for finished item of work excluding seigniorage excluding dewatering charges etc as per SS - 20 B (APSS 308) - in Ordinary Soil-Manual Means-Upto 3M depth

Filling of foundations with Dust from including spreading in layers irrespective of thickness brough from approved source including cost and conveyance of all materials and all labour charges etc., complete as per standard specification referred and direction of the departmental officers.

Plain Cement concrete (1:5:10) using 40 mm metal with hand mixing upto plinth level: PCC (1:5:10) Nominal Mix (Cement:Fine aggregate: Coarse aggregate) corresponding to Table 9 of IS 456 using 40mm size nominal machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand), coarse aggregate, water etc., to site and including all operational, incidental and labour charges such as hand mixing, laying conc curing etc., complete but excluding cost of steel and its fabrication charges, seigniorage charges, sales & other taxes on all materials for finished item of work, but excluding Centering & Scaffolding, Shuttering

Dismanteling Old Reinforced Cement Concrete and clearing away the materials and stacking the carefully useful for reuse including all labour charges etc., complete for finished item of work. BLD CSTN 12.2.i

VRCC M20 Nominal Mix (Cement:Fine aggregate: Coarse aggregate) corresponding to Table 9 of IS 456 using 20mm size graded machine cru shed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand), coarse aggregate, water etc., to site and including all operational, incidental and all labour charges such as machine mixing, laying concrete, curing etc., but excluding cost of steel and its fabrication charges, seigni charges, sales & other taxes on all materials etc., complete as per drawing, Technical specification for finished item of work or as directed by Engineer-in- Charge, but including Centering & Scaffolding, Shuttering for Columns

VRCC M20 Nominal Mix (Cement:Fine aggregate: Coarse aggregate) corresponding to Table 9 of IS 456 using 20mm size graded machine cru shed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand), coarse aggregate, water etc., to site and including all operational, incidental and all labour charges such as machine mixing, laying concrete, curing etc., but excluding cost of steel and its fabrication charges, seigni charges, sales & other taxes on all materials etc., complete as per drawing, Technical specification for finished item of work or as directed by Engineer-in- Charge, but including Centering & Scaffolding, Shuttering for Lintels

VRCC M20 Nominal Mix (Cement:Fine aggregate: Coarse aggregate) corresponding to Table 9 of IS 456 using 20mm size graded machine cru shed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand), coarse aggregate, water etc., to site and including all operational, incidental and all labour charges such as machine mixing, laying concrete, curing etc., but excluding cost of steel and its fabrication charges, seigni charges, sales & other taxes on all materials etc., complete as per drawing, Technical specification for finished item of work or as directed by Engineer-in- Charge, but including Centering & Scaffolding, Shuttering for Sun Shade/Chajja of Slab Average thickness of 62.50mm

VRCC M20 Nominal Mix (Cement:Fine aggregate: Coarse aggregate) corresponding to Table 9 of IS 456 using 20mm size graded machine cru shed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand), coarse aggregate, water etc., to site and including all operational, incidental and all labour charges such as machine mixing, laying concrete, curing etc., but excluding cost of steel and its fabrication charges, seigni charges, sales & other taxes on all materials etc., complete as per drawing, Technical specification for finished item of work or as directed by Engineer-in- Charge, but including Centering & Scaffolding, Shuttering for Beams

VRCC M20 Nominal Mix (Cement:Fine aggregate: Coarse aggregate) corresponding to Table 9 of IS 456 using 20mm size graded machine cru shed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand), coarse aggregate, water etc., to site and including all operational, incidental and all labour charges such as machine mixing, laying concrete, curing etc., but excluding cost of steel and its fabrication charges, seigni charges, sales & other taxes on all materials etc., complete as per drawing, Technical specification for finished item of work or as directed by Engineer-in- Charge, but including Centering & Scaffolding, Shuttering for 125mm thick Slab

S&F HYSD bars (Lap splicing) - Providing High Yield Strength Deformed (HYSD) (Fe 415 grade as per IS 1786-1979) of different d iameters for RCC works , including labour charges for straightening, cutting, bending to required sizes and shapes, placing in position with cover blocks of approved materials and size and tying and lap-splicing with binding wire of 18 SWG, forming grills for rein forcement work as per approved designs and drawings, including cost and conveyance of steel bars, includin g all wastages such as overlaps, couplings, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, tying excluding sales and other taxes on all materials etc., complete for finished item of work in all floors.( APSS No.126)

Providing impervious coat to exposed RCC roof slab surface with CM(1:3), 20mm thick with 1kg of water proof compound per bag of cement laid over roof when it is green including cost of all materials, seigniorage charges, excluding conveyance charges of materials and including all operational, incidental and labour charges for mixing mortar, laying, rendering smooth and thread lining, curing, rounding off junctions of wall and slab etc, complete for finished item of work all materials and operati incidental, and labour charges for mixing mortar, laying, lift charges, rendering smooth and thread lining, curing, rounding off junctions of wall and slab etc., but excluding seigniorage charges complete for finished item of work or as directed by Engineer-in-Charge. (APSS No. 901 & 903).

Brick Masonry in CM (1:6) with Bricks with traditional size 23 x 11 x 7 cms 2nd class: Brick Masonry 230 mm thick with Cement Mortar (1:6) prop. (Cement:Sand) using Common Burnt Clay Bricks Non-Modular of traditional size 23 x 11 x 7 cm 2nd Class from approved source having minimum crushing strength of not less than 3.5 N/sq.mm. including cost and conveyance of all materials like cement, sand, bricks, water etc., to site, and all incidental and operational, labour charges like mixing cement mort affolding charges, constructing masonry, lift charges, curing etc., but excluding seigniorage charges, complete as per drawing and Technical specifications cluase APSS 504 for finished item of work or as directed by Engineer-in Charge for panel walls in Super-Structure

Brick Masonry in CM (1:6) with Bricks with traditional size 23 x 11 x 7 cms 2nd class: Brick Masonry 230 mm thick with Cement Mortar (1:6) prop. (Cement:Sand) using Common Burnt Clay Bricks Non-Modular of traditional size 23 x 11 x 7 cm 2nd Class from approved source having minimum crushing strength of not less than 3.5 N/sq.mm. including cost and conveyance of all materials like cement, sand, bricks, water etc., to site, and all incidental and operational, labour charges like mixing cement mort affolding charges, constructing masonry, lift charges, curing etc., but excluding seigniorage charges, complete as per drawing and Technical specifications cluase APSS 504 for finished item of work or as directed by Engineer-in Charge for panel walls in Super-Structure, for parapet walls.

Ceiling Plastering 12 mm thick in CM (1:3) sponge finish including cost and conveyance of all materials like cement, sand, water etc., to site, seigniorage charges, sales & other taxes on all materials,all operational, incidental and labour charges such as mixing mortar, scaffolding charges, lift charges, including cutting of Grooves wherever necessary as directed by Engineer - in - charge, finishing, curing, etc., complete BLD CSTN 6.1

Plastering 12 mm thick in single coat in CM (1:5) including cost and conveyance of all materials like cement, sand, water etc., to site, and all operational, incidental charges on materials and including cost of all labour charges for mixing mortar, finishing, scaffolding, lift charges, curing, cutting Grooves etc., but excluding seigniorage charges, sales & other taxes on all materials, complete as per the drawing, technical specification clauses APSS 901, 903 & 904 for finished item of w ork or as directed by the Engineer-in-Charge for Brick Wall and RCC exposed faces.

Plastering 20 mm thick in single coat in CM (1:5) including cost and conveyance of all materials like cement, sand, water etc., to site, and all operational, incidental charges on materials and including cost of all labour charges for mixing mortar, finishing, scaffolding, lift charges, curing, cutting Grooves etc., but excluding seigniorage charges, sales & other taxes on all materials, complete as per the drawing, technical specification clauses APSS 901, 903 & 904 for finished item of w ork or as directed by the Engineer-in-Charge for Brick Wall and RCC exposed faces.

Flooring with Soluble salt porcelain vitrified tiles screen printed and polished of size 600 x 600 mm and thickness between 810 mm 1st quality conforming to IS:13711, IS:13712, IS:13630 (Parts 1 to 15) of any colour and finish in all shades and designs , set over base coat of cement mortar (1:8), 12 mm thick over CC bed already laid or RCC roof slab, including neat cement slurry of honey like consistency spread @ 3.3.kgs per sqm & jointed neatly with white cement paste to full depth mixed with p igment of matching shade, including cost of all materials like cement, sand, water, tiles etc., and including all operational & incidental charges and all labour charges etc., complete, but excluding seigniorage charges, for finished item of work or as directed by the Engineer-in-Charge

Skirting to walls upto 15cm height / raisers of steps with 8mm thick mirror polished granite tileslength equal to flooring stones, of 1st. quality of any shade as approved by Engineer - in - charge set over a base coat of CM (1:3) 12mm thick with neat cement slurry of honey like consistency spread at the rate of 3.3 Kgs of cement per Sqm and jointed with neat white cement paste to full depth mixed with pigment of matching shade including cost of all materials like cement, sand, water, ceramic tiles etc. to site, seigniorage charges, sales and other taxes on all materials, all operational, incidental and labour charges such as mixing of cement mortar, laying, curing, lift charges etc., complete for finished item of work. BLD CSTN 7.21

Flooring with Non-skid red or white full body Ceramic floor tiles of size 300 x 300 mm and thickness between 7-8 mm 1st quality conforming to IS:13711, IS:13712, IS:13630 (Parts 1 to 15) of any colour and finish in all shades and designs, set over base coat of cement mortar (1:8), 12 mm thick over CC bed already laid or RCC roof slab, including neat cement slurry of honey like consistency spread @ 3.3.kgs per sqm & jointed neatly with white cement paste to full depth mixed with pigment of matchi ng shade, including cost of all materials like cement, sand, water, tiles etc., and including all operational & incidental charges and all labour charges etc., complete, but excluding seigniorage charges, for finished item of work or as directed by the Engineer-in-Charge

Dadooing to walls with Glazed Coloured Tiles 1st. quality of any size of brand as approved by Engineer - in - charge and set over a base coat of CM (1:5) 12mm thick and neat cement paste at the rate of 3.3 Kg/Sqmt. and jointed with white cement paste mixed with pigment of matching shade including cost and conveyance of all materials like cement, sand, water, tiles, etc. to site, , sales and other taxes on all materials, C921 such as mixing of cement mortar, laying in position, curing, lift charges etc., complete for finished item of work. BLD CSTN 7.20

Manuafacturing, supply & fixing of Sal Wood Door, using frame of size 105x75mm along with flush door shutter of 35mm thick double shutters with bond wood solid block board type core having cross bonds and face veneers hot pressed bonded with water proof phenol formaldehyde synthetic resin factory made confirming to ES 2202-1991 (part-I) with internal lipping with teak wood on all sides and external teak lipping of size 35x6mm including cost and conveyance of frame and flush shutters to site including sales and other taxes on all materials including fixing the fixtures to door to site required number of screws, bolts and nuts including labour charges for fixing the frame in position fixing the shutter to the frame complete for finished item of work for Door Size 1.2X2.1m

Manuafacturing, supply & fixing of Sal Wood Door, using frame of size 105x75mm along with flush door shutter of 35mm thick double shutters with bond wood solid block board type core having cross bonds and face veneers hot pressed bonded with water proof phenol formaldehyde synthetic resin factory made confirming to ES 2202-1991 (part-I) with internal lipping with teak wood on all sides and external teak lipping of size 35x6mm including cost and conveyance of frame and flush shutters to site including sales and other taxes on all materials including fixing the fixtures to door to site required number of screws, bolts and nuts including labour charges for fixing the frame in position fixing the shutter to the frame complete for finished item of work for Door Size 1.05X2.1m

Manuafacturing, supply & fixing of Sal Wood Door, using frame of size 105x75mm along with flush door shutter of 35mm thick double shutters with bond wood solid block board type core having cross bonds and face veneers hot pressed bonded with water proof phenol formaldehyde synthetic resin factory made confirming to ES 2202-1991 (part-I) with internal lipping with teak wood on all sides and external teak lipping of size 35x6mm including cost and conveyance of frame and flush shutters to site including sales and other taxes on all materials including fixing the fixtures to door to site required number of screws, bolts and nuts including labour charges for fixing the frame in position fixing the shutter to the frame complete for finished item of work for Door Size 0.75X2.1m

Providing and fixing 28 -30 MM thick solid Wood Polymer Composite(WPC) single extruded door shutter with 3MM top and bottom rigid layer with an overall density of 750kg/Cum. It will be fixed to the frame using 3 inch /4 inch hinges. A minimum of 4 hinges will be required for fixing the door with the frame

Painting with plastic emulsion paint of grade-1 standard make to exterior / interior faces of new walls two coat of approved make shade and colour over primer coat with cement primer grade - I including cost and conveyance of materials like Plastic Emulsion paint, white cement to site including cost of brushes, scaffolding charges, lift charges and labour charges such as preparing the wall, applying primer coat , two coats of Plastic Emulsion etc., complete for finished item of work (APSS No.910, 911&1201) in all floors.

Providing and fixing of Three shutter Sliding Windows made of Galvanized Steel (Base Steel as per IS 513, D quality, galvanized as per IS 277 with Zinc of 120 GSM), using factory made section powder coated with Pure polyester powder upto 50-60 microns thick with total coated thickness of 0.58 mm for Outer Frame and 0.58 mm thickness for Sliding Shutter Section, the Outer Frame for three tracks with grill provision size of 105 mm x 50 mm and without grill provision is of 90 mm x 50 mm and the Window Shutter section of 58 mm x 36 mm and the outer Frame with two integrated guide tracks of 12mm width and 24mm deep for provision to slide the Shutter / sash frame and facilitates with a water drain outlet component made of PVC and the shutter frame fitted with 5mm thick plainfloat glass of reputed make and fixed with EPDM weathering seal resistant accessories and handle made of Alumimium 1 No. per each shutter and cut to length miter joined with corner brackets including installation of window system at site using anchor fasteners, Silicon sealant applied at the Outer frame corners inclusive of conveyance of all materials accessories, labour charges, and erection at site with complete finished item of work.Window with 3 shutters (center fixed shutter / Center sliding shutter / center Fly mesh shutter) and with Grill Window made of Outer Frame of Size 105 mm x 50 mm. Grill made of 10mm MS Square Rods for horizontal bars at a regular pitch of 150mm welded to MS flat of 12 x 6 mm.i) Center Shutter Fixed: center shutter frame made of section with size 20mm x 47mm should be fitted with 5mm thick plain float glass of reputed make, EPDM gasket all around the glass and fixed to the Outer Frame with the supporting section of size 29mm x 20mm of 0.58mm thick fixed horizontally on top and bottom of the shutter frame.BMT-P.40

Fabrication, Spply and fixing in position MS Pipes of different sizes including Cost & Conveyance of all materials and all labour chareges such as Fabrication, Cutting, welding, Placing in position etc., complete for finished item of work