SPECIAL REPAIRS TO TOILET BLOCK OF BLDG NO T 377A AND CERTAIN REVENUE AND MINOR WORKS AT MASIMPUR MILITARY STATION UNDER GE SILCHAR

Amount

EXCAVATION & EARTHWORK

Excavation in trenches not exceeding 1.5m wide and not exceeding 1.5m in depth for foundations, manholes, etc. or for laying cables/pipes, erecting poles, etc. not exceeding 10sqm on plan and getting out in soft / loose soil complete all as specified and as directed

Returning, filling in, including, spreading, leveling, watering and well ramming in layers not exceeding 25cm deep as in any type of soil complete all as specified and as directed

Removing excavated materials to a distance not exceeding 50m and depositing where directed at a level not exceeding 1.5m above the starting point in any type of soil including spreading in low lying area and leveling complete all as specified and as directed

Surface dressing not exceeding 15cm deep and getting out in soft/loose soil complete all as specified and as directed

Excavation over areas not exceeding 1.5m deep and getting out in soft / loose soil complete all as specified and as directed

Excavation over areas exceeding 1.5m but not exceeding 3.0m deep and getting out in soft / loose soil complete all as specified and as directed

Forming embankments including raising (or lowering) earth, spreading in layers not exceeding 30cm thick, watering,ramming / rolling and finishing to required size, shape, etc. not exceeding 1.5m high from base complete all as specified and as directed

M&L for hard core of gauge not exceeding 63mm, deposited, spread and levelled in layers not exceeding 15cm thick, watered and rammed to a true surface, using broken stone or boulders complete all as specified and as directed

B/R WORKS

Dismantling floor hearth or wall tiling including cement mortar bedding (but not backing) and disposing off complete all as specified and as directed

Dismantling stone slabs of any description or thickness in floors, aprons etc. laid, bedded and pointed in any mortar and disposing off complete all as specified and as directed

Dismantling of plain or corrugated steel sheeting, any gauge or any thickness in roof covering /wall cladding complete all as specified and as directed

Dismantling mild steel work or wraught iron of any description and in any position complete all as specified and as directed

Demolition of reed, lathing, single or double including battens and plaster or chiken wire lathing complete all as specified and as directed

Dismantling of timber scantling 40sqcm and over in section, in any position in unframed works complete all as specified and as directed

Taking down cement or cement lime plaster, any description on brick or stone walls, etc. including raking out joints, hacking for keys, scubbing down with water, etc. including all necessary scaffolding as required and rubbishing off the premises, etc. complete all as specified and as directed

Demolition of brickwork or stone / boulder masonry, built in cement mortar including all quoins, arches, pillars, etc but excluding ashlar facings, dressed stonework and precast concrete articles and disposing off complete all as specified and as directed

Demolition of cement concrete (un-reinforced) in ground floors and pavings not exceeding 15cm thickness (below or above ground level) and removal of debris complete all as specified and as directed

M&L for earth filling under floors by spreading and levelling earth in layers not exceeding 25cm thick including well ramming and watering as required complete all as specified and as directed Note: Earth obtained from excavation shall be used under this item

M&L for loose filling with broken brick aggregates of gauge 40 to 80mm in soakage pits, soakage wells, etc. complete all as specified and as directed

Taking down chowkats or frames not exceeding 1.5sqm each with shutters (without taking off shutters from the frame) and disposing off

Taking down chowkats or frames exceeding 1.5sqm but not exceeding 4sqm each but with shutters (without taking off shutters from the frame) and disposing off

Cutting chases, pinning in brick walls and making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc. and cutting chases for concealed water tubing or concealed conduit wiring, etc. and making good, cutting not exceeding 10cm in girth complete all as specified and as directed

M&L for framed works conforming to Fe 410-W (grade E-250) quality-A as in doors or gates of angle or other section with gusset plates, rails, braces, etc. drilled for fixing of steel sheeting or other covering. doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging also fastening and fixing complete all as specified and as directed

S&F in position steel work in trusses, purlins, posts and the like using tubular/ square hollow sections including special shaped washer, etc. using ERW or induction butt welded tubes / SHS conforming to IS-1161-2014 / IS-4923-1997 grade St-210 complete all as specified and as directed

S&F framed work such as grills, gratings, etc. with ends of bars shouldered and/or riveted, or forged into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walk ways, railings, framework of water tanks and similar works conforming to Fe-290 grade E-165 complete all as specified and as directed

M&L for mild steel TMT bars 10mm dia, cut to length, bent to shape required including cranking, bending spirally or hooping for columns, hooking ends and binding with and including MS wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed

M&L for mild steel TMT bars 6 to 8mm dia, cut to length, bent to shape required including cranking, bending spirally or hooping for columns, hooking ends and binding with and including MS wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed

M&L for mild steel TMT bars 5mm dia and over upto and including 8mm dia as in stirrups, spacers and binders securing with clips complete all as specified and as directed

M&L for formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams and similar work, vertical or to batter for rough finished surfaces complete all as specified and as directed

M&L for formwork to sides of pillars, posts, struts, piers, columns and stanchions for rough finished surfaces complete all as specified and as directed

M&L for formwork to sides and soffits of floor or roof beam, beam haunching, girder, lintels, cantilever, shelves including supports, etc. for rough finished flat surfaces of concrete complete all as specified and as directed

M&L for formwork to soffits of suspended slabs, such as roof slab, floor slab, landings and similar works not exceeding 200mm thick for rough finished flat surfaces of concrete complete all as specified and as directed

M&L for formwork to edges of concrete flats, treads, breaks in floors, window cills, concrete railings, openings in concrete walls, floor and roofs not exceeding 200mm wide and sides of RCC/ PCC bands in walls, horizontal or sloping and similar work exceeding 50mm but n exceeding 100mm wide complete all as specified and as directed

M&L for brickwork with sub-class 'B' bricks, straight or curved on plan to any radius built in CM (1:4) complete all as specified and as directed

M&L for brickwork with sub-class 'B' bricks, straight or curved on plan to any radius built in CM (1:6) complete all as specified and as directed

M&L for brickwork with sub-class 'B' bricks, straight or curved on plan to any radius as in half brick thick walls built in CM (1:4) complete all as specified and as directed

M&L brickwork with sub-class `B' bricks in one brick thick honeycomb walling built in cement mortar 1:4 complete all as specified and as directed

M&L for plain cement concrete type B-1, 1:2:4 (using 20mm graded stone aggregates) in coping, kerbs and the like including weathering, slightly rounded or chamfered angles and throating, etc. including all necessary formwork complete all as specified and as directed

M&L for pre-cast cement concrete 1:2:4 type B-1 (using 20mm graded stone aggregates) as in landings, cover slabs for manholes, chullah hoods, chajjas, water troughs, shelves and similar articles, with plain faces, set in CM 1:4 complete all as specified and as directed

M&L for plain cement concrete type B-0, 1:2:4 (using 12.5mm graded stone aggregates) in bed blocks, apex stones, keelers and the like including weathering, slightly rounded or chamfered angles and throating, etc. including all necessary formwork complete all as specified and as directed

M&L for 25mm thick pain cement concrete type B-1, 1:2:4 (using 20mm graded stone aggregates) as in flooring finished to receive floor finish complete all as specified and as directed

M&L for 75mm thick plain cement concrete 1:3:6 type C-2 (using 40mm graded stone aggregates) as in sub-bases, floors, etc. finished fair and even complete all as specified and as directed

M&L for 75mm thick plain cement concrete 1:3:6 type C-2 (using 40mm graded stone aggregates) as in floors, plinth protection, pavings, etc. surface finished even and fair, laid in alternate bays/panels and joints filled with bituminous mix of 1 part bitumen and 3 part of sand complete all as specified and as directed

M&L for cement concrete 1:3:6 type C-0 (using 12.5mm graded stone aggregates) as in back filling of steel frame and holdfasts, etc. including necessary formwork complete all as specified and as directed

M&L for plain cement concrete 1:3:6 (type C-2) using 40mm graded stone aggregate for bed to drain pipes including packing under and haunching against the sides of pipes after they are laid and tested for 110mm dia drain pipes complete all as specified and as directed

M&L for plain cement concrete 1:3:6 type C-2 (using 40mm graded stone aggregates) as in foundation filling, mass concrete, etc. complete all as specified and as directed

M&L for plain cement concrete 1:4:8 (type D-2) using 40mm graded stone aggregate as in foundation filling, mass concrete, etc. complete all as specified and as directed

M&L RCC (1:1.5:3) nominal mix using 20mm graded stone aggegates as in beams, cantilevers, lintels, etc. over 1.5m in span complete all as specified and as directed

M&L RCC M 25 design mix as in foundations including rafts, footings, foundation beams, plinth beams, column footings, under reamed piles, mass concrete, etc. complete all as specified and as directed

M&L RCC M 25 design mix as in columns, pillars, posts, etc complete all as specified and as directed

M&L RCC M 25 design mix as in bands, beams, cantilevers, bressummers, lintels over 1.5m span complete all as specified and as directed

M&L RCC M 25 design mix as in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and as directed

M&L for fine dry river sand bedding under floors, pavings, etc. then punning down to its consolidated thickness, 50mm thick complete all as specified and as directed Note: Only punned thickness of sand shall be considered for measurement purposes

M&L for laying pre-polished 60mm thick rubber moulded, double glossy, coloured, designer, interlocking paver blocks made of M-35 design mix concrete of approved design and shape with the crushing strength not less than 350kg/sqcm conforming to IS: 15658-2006, pointed in grey cement complete all as specified and as directed

M&L rendering 12mm thick, in cement mortar (1:6) on walls / concrete surfaces, etc. finished even and fair without using extra cement complete all as specified and as directed

M&L rendering 20mm thick, in cement mortar (1:3) on walls / concrete surfaces, etc. mixed with integral water proofing compound @3% by weight of cement, finished even and smooth without using extra cement complete all as specified and as directed Note: WPC will be measured and paid separately under respective item herein

M&L rendering 15mm thick, in cement mortar (1:4) on walls / concrete surfaces, etc. in two layers (10+5mm) finishing layer mixed with integral water proofing compound @3% by weight of cement, finished even and smooth without using extra cement complete all as specified and as directed Note: WPC will be measured and paid separately under respective item herein

M&L rendering 15mm thick, in cement mortar (1:4) on walls / concrete surfaces, etc. finished even and fair without using extra cement complete all as specified and as directed

M&L rendering 10mm thick, in cement mortar (1:6) on walls / concrete surfaces, etc. finished even and fair without using extra cement complete all as specified and as directed

M&L rendering 10mm thick, in cement mortar (1:3) on roof surfaces, etc. mixed with integral water proofing compound @3% by weight of cement, finished fair and even without using extra cement complete all as specified and as directed

M&L rendering 5mm thick, in cement mortar (1:3) on concrete soffits / ceiling surfaces, etc. finished even and smooth without using extra cement complete all as specified and as directed

Supply only integral water proofing compound all as specified

S&F pressed steel frames made of 1.25mm thick MS sheet of profile 105x60mm for door and window frames with one or more rebates including hinges (100/50mm stainless steel), lock strike plate, shock absorber, 20mm dia 60mm long MS conduit for housing of aldrop bolt, treating of internal surfaces of chowkhats with coal tar or black paint including hinges, hold fasts/lugs, etc. complete all as specified and as directed

S&F steel ventilator with top hung shutter including hinges, steel peg stay, lugs as in hold fast including suitable locking arrangements complete all as specified and as directed

S&F powder coated aluminium sections (minimum thickness of powder coating 50micron) for doors, windows & ventilators any pattern, with frame, fixing hinges, side lock, rollers for sliding windows and making provision for fixing of fittings wherever required, EPDM rubber/neoprene gasket required with extruded built up standard tubular sections/ appropriate Z sections and other sections conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, necessary filling up the gaps at junctions i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, aluminium snap beading for glazing/ paneling, CP brass/ stainless steel screws complete all as per drawings, specified and as directed Note: Glass panes, wire mesh will be measured and paid separately and all other fitting & fixtures shall be deemed to be included in the quoted rate

S&F factory made wire gauged PVC moulded door shutter 30mm thick (style) consisting of frame made out of MS tubes for top & bottom rails, MS frame covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; paneling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading and jointed together with solvent cement, wire gauge shall be stretched and tightened firmly and wrapped in additional MS square soild 8mm dia tube, duly welded to MS tube, supply and fixing in the frame at site as per clause 8B.2.1 of MES Schedule Part-II (2020) complete all as specified and as directed

S&F factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top & bottom rails, MS frame covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; paneling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading and jointed together with solvent cement, supply and fixing in the frame at site as per clause 8B.2.1 of MES Schedule Part-II (2020) complete all as specified and as directed

S&F solid PVC door frame of size 50x47mm made of 5mm plain colour PVC sheet reinforced with mild steel square tube and edges painted to match with printed sheet all as specified in clause 8B.3.1 and as per drawing shown in SSR Part-II (2020) complete all as specified and as directed

M&L for 2nd class hard wood timber scantling wraught, 40sqcm and above in section, timber framed & fixed complete all as specified and as directed

S&F 100mm long butt hinges, extruded aluminium alloy with stainless steel hinge pin, anodised (ISI marked) fixed with stainless steel screws complete all as specified and as directed

S&F stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and as directed

S&F 4mm thick sheet glass ordinary quality and glazing with oil putting square not exceeding 0.5sqm in each pane complete all as specified and as directed

S&F 3mm thick sheet glass ordinary quality and glazing with oil putting square not exceeding 0.5sqm in each pane complete all as specified and as directed

S&F 3mm thick frosted glass ordinary quality and glazing with oil putting square not exceeding 0.5sqm in each pane complete all as specified and as directed

S&F PVC roller in aluminium body of suitable size for sliding shutters complete all as specified and as directed

S&F side locks of PVC coated aluminium body, suitable size for sliding shutters complete all as specified and as directed

S&F rubber beading for securing glass of suitable size complete all as specified and as directed

S&F 150mm long aluminum anodised barrel tower bolts of extruded section complete all as specified and as directed

S&F 150mm extruded aluminum alloy handles, cast type, anodized complete all as specified and as directed

S&F 125mm extruded aluminum alloy handles, cast type, anodized complete all as specified and as directed

S&F 100mm extruded aluminum alloy handles, cast type, anodized complete all as specified and as directed

S&F 250mm aluminium anodised sliding door bolt with hasp and staple, bolt type, with mild steel hinge pin including bolt to hinge plate and fixed with screws complete all as specified and as directed

M&L for preparation of masonry / concrete wall surfaces and applying 1mm thick wall care putty including all necessary staging, scaffolding, etc. as required to work at heights, etc. complete all as specified and as directed

M&L for preparation of new masonry / concrete ceiling surfaces and applying three coats of white wash including all necessary staging, etc. as required complete all as specified and as directed

M&L for preparation of new masonry / concrete wall surfaces and applying three coats of white wash including all necessary staging, etc. as required complete all as specified and as directed

M&L for preparation of new masonry / concrete wall surfaces and applying two coats of oil emulsion distemper over a coat of wall primer including all necessary staging, scaffolding, etc. as required to work at heights, etc. complete all as specified and as directed

M&L for preparation of new plastered surfaces and applying two or more coats of 100% premium acrylic emulsion paint having VOC less than 50gm/litre and UV resistance as per IS 15489:2004, alkali & fungus resistant, dirt resistant, exterior paint (of approved tint, company depot tinted) with silicon additives @1.43litre/10sqm over a priming coat of exterior primer applied @0.90litre/10sqm complete all as specified and as directed

M&L for preparing of new steel / metal surfaces of any description over 10cm in width or girth and applying two coats of synthetic enamel paint (tint as approved) over a coat of red oxide zinc chrome primer complete all as specified and as directed

M&L for preparing of new wood / wood based surfaces of any description over 10cm in width or girth and applying two coats of synthetic enamel paint over a coat of pink primer, tint as approved complete all as specified and as directed

M&L for preparing of old wood / wood based surfaces of any description over 10cm in width or girth and applying two coats of synthetic enamel paint over a coat of pink primer, tint as approved complete all as specified and as directed

M&L for non-skid ceramic tiles, coloured, area of tile exceeding 0.11sqm but not exceeding 0.18sqm each, 7 to 8mm thick of superior quality as in floors, etc. laid over and including 15mm thick screed bed in CM (1:6) (rate shall be included) set and jointed in neat cement slurry @3.00kg of cement per sqm and pointed in white cement mixed with colouring pigment to match shade of tiles complete all as specified and as directed

M&L for non-skid ceramic tiles, coloured, area of tile exceeding 0.18sqm but not exceeding 0.36sqm each, 7 to 8mm thick of superior quality as in floors, etc. laid over and including 15mm thick screed bed in CM (1:6) (rate shall be included) set and jointed in neat cement slurry @3.00kg of cement per sqm and pointed in white cement mixed with colouring pigment to match shade of tiles complete all as specified and as directed

M&L for non-skid ceramic tiles, coloured, area of tile exceeding 0.18sqm but not exceeding 0.38sqm each, 7 to 8mm thick of superior quality as in skirting, dado, etc. laid against and including 10mm thick backing coat in CM (1:4) (rate shall be included) set and jointed in neat cement slurry @3.00kg of cement per sqm and pointed in white cement mixed with colouring pigment to match shade of tiles complete all as specified and as directed

M&L for glazed ceramic tiles, coloured, of size 450x350mm, 6 to 7mm thick, of superior quality as in vertical surfaces, skirting, dado, etc. laid over 10mm thick backing coat in CM (1:4) (rate shall be included) pointed in white cement mixed with colouring pigment to match shade of tiles complete all as specified and as directed

M&L for 18-20mm thick granite stone slab, of any type, table rubbed and polished, in steps, jambs, pillars, window cills, cooking platforms and the like in laid over and including 15mm thick screed in cement mortar (1:4) (rate shall be included) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of slab complete all as specified and as directed

M&L for applying one coat of bituminous primer @0.2litres/sqm conforming to IS-3384-1986 over dried up concrete or plastered surfaces including cleaning and preperation of surfaces complete all as specified and as directed

Supplying and fixing in position galvanised, corrugated 0.63mm thick mild steel sheeting with two corrugations side lap, fixed with L-type or J-type or cranked hook bolts, in roofs, walls, etc. with grade of zinc coating 275 complete all as specified and as directed

Supplying and fixing in position plain, galvanised, 0.63mm thick mild steel sheeting, in ridges, hips, valley gutters, drip and straight flashings (length and girth as fixed) with grade of zinc coating 275 complete all as specified and as directed

Supply and laying APP based polymeric membrane 3mm thick (minimum), weighting not less than 3.5kg/sqm reinforced with polyester non woven fabric (weighting not less than 160gms/sqm) applied over primed surfaces by torching application as per manufacturer's instructions with overlaps minium 100mm on the transverse directions and 75mm in longitudinal directions complete all as specified and as directed

S&F steel water tubing, medium grade, galvanised with screwed and socketed joints, in any length, including supply and fixing all fittings, ISI marked conforming to IS -1239 and fixed to walls or laid in floors / trenches required for water connections including taking up/down old unserviceable tubing from any location/position and disposing off complete all as specified and as directed of the following bores:

15mm bore

20mm bore

S&F steel water tubing, medium grade, galvanised with screwed and socketed joints, in any length, including supply and fixing all fittings, ISI marked conforming to IS -1239 and fixed to walls or laid in floors / trenches required for water connections complete all as specified and as directed of the following bores:

15mm bore

20mm bore

S&F in repairs gun metal globe or gate valve, 20mm dia, with iron wheel head, screwed both ends for iron pipe and fixed including necessary cutting into existing pipe, threading, inserting new piece of GI pipe of existing size, breaking/cutting into cement concrete, masonry, etc. and making good the disturbed surfaces complete all as specified and as directed

S&F in repairs vitreous China squatting pan, Orissa pattern of size 580x440mm, white, with integral foot rests and 'P' or 'S' trap, connecting to flushing pipe, cast iron 100mm bore 'P' trap with 500 to 600mm long neck including necessary lime concrete and making good to the disturbed surfaces in CM 1:3 with finishes to match with the existing complete all as specified and as directed

S&F vitreous China squatting pan, Orissa pattern of size 580x440mm, white, with integral foot rests and 'P' or 'S' trap, connecting to flushing pipe, cast iron 100mm bore 'P' trap with 500 to 600mm long neck including necessary lime concrete and making good to the disturbed surfaces in CM 1:3 with finishes to match with the existing complete all as specified and as directed

S&F vitreous China wash down water closet pan (Pedestal pattern), coloured (as approved), with 'P' or 'S' trap, including flush pipe, trap, connection to drain or outgoing pipe, anti-syphonic pipe, seat cover to match with colour of WC, closed pattern with flat bottom & cover and chromium plated mild steel or aluminum anodized hinge device and jointing and connecting up complete all as specified and as directed

S&F in repairs vitreous China bowl urinal flat back half stall of size 465x355x265mm (minimum), white, with grating and union for discharge pipe, including providing fixing plugs, brackets, grating, union and connections to flushing pipe, bedding urinal against wall in CM 1:2, securing bowl with plugs and 60mm long brass screws, pointing around urinal bowl in white cement (excluding flushing cistern, flush pipe and waste pipe) complete all as specified and as directed

S&F in repairs counter top wash hand basin, vitreous China, white, flat back type, of size 560x461mm, including CI brackets, cutting for and pinning in ends of brackets with coupling and including PVC connection 60cm key with brass union complete all as specified and as directed

S&F wash hand basin, vitreous China, white, flat back type, of size 550x400mm, including CI brackets, cutting for and pinning in ends of brackets with coupling and including PVC connection 60cm key with brass union complete all as specified and as directed

S&F 10litres capacity PVC flushing tank, white / coloured, syphonic action type, low level, valveless, with PVC inlet ball valve, PVC flush pipe, float and suitable sized brackets including cutting of floor / wall and making good to the disturbed surfaces in CM 1:3 with finishes to match with the existing and taking down of old PVC flush tank and disposing off complete all as specified and as directed

S&F 10litres capacity PVC flushing tank, white / coloured, syphonic action type, low level, valveless, with PVC inlet ball valve, PVC flush pipe, float and suitable sized brackets including cutting of floor / wall and making good to the disturbed surfaces in CM 1:3 with finishes to match with the existing complete all as specified and as directed

S&F in repairs 15mm bib taps, chromium plated, cast copper alloy with crutch or butter fly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and as directed

S&F 15mm bib taps, chromium plated, cast copper alloy with crutch or butter fly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and as directed

S&F in repairs 15mm dia pillar taps, fancy type, cast copper alloy, with capstain heads, chromium plated, screwed down, high pressure, with or without lettered 'HOT'/'COLD', with long screwed shanks and fly nuts, screwed for iron pipe complete all as specified and as directed

S&F 15mm dia pillar taps, fancy type, cast copper alloy, with capstain heads, chromium plated, screwed down, high pressure, with or without lettered 'HOT'/'COLD', with long screwed shanks and fly nuts, screwed for iron pipe complete all as specified and as directed

S&F in repairs 15mm dia stop cocks / angle valves, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions or for brass ferrule complete all as specified and as directed

S&F 15mm dia stop cocks / angle valves, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions or for brass ferrule complete all as specified and as directed

S&F in repairs 15mm dia stop cocks / angle valves, cast copper alloy, concealed type, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions or for brass ferrule complete all as specified and as directed

S&F in repairs chromium plated mild steel soap dish of approved design, any type, fixed to plugs with chromium plated brass screws complete all as specified and as directed

S&F chromium plated mild steel soap dish of approved design, any type, fixed to plugs with chromium plated brass screws complete all as specified and as directed

S&F in repairs 125mm dia CP brass shower rose with swivel joints, any colour including shower arm 15mm dia, 195mm long with bend of 45o with flange of CP brass complete all as specified and as directed

S&F 125mm dia CP brass shower rose with swivel joints, any colour including shower arm 15mm dia, 195mm long with bend of 45o with flange of CP brass complete all as specified and as directed

S&F in repairs 15mm PVC connections, 450mm long with brass couplings, PTMT nuts, etc. complete all as specified and as directed

S&F 15mm PVC connections, 450mm long with brass couplings, PTMT nuts, etc. complete all as specified and as directed

S&F 32mm dia PVC waste pipe, with coupling, 900mm long, PTMT, half or full threaded complete all as specified and as directed

S&F in repairs towel rail, 20mm dia, brass chromium plated, 600mm long with fancy type with brass chromium plated brackets on both sides and fixed with steel screws and wooden/rawl plugs complete all as specified and as directed

S&F towel rail, 20mm dia, brass chromium plated, 600mm long with fancy type with brass chromium plated brackets on both sides and fixed with steel screws and wooden/rawl plugs complete all as specified and as directed

S&F in repairs 25mm dia ball PTMT valves, weighing minimum 455gm, high pressure, with high density plastic / polythene float / ball, epoxy coated aluminium rod and flynut, screwed for iron pipe or brass ferrule and fixed complete all as specified and as directed

S&F 25mm dia ball PTMT valves, weighing minimum 455gm, high pressure, with high density plastic / polythene float / ball, epoxy coated aluminium rod and flynut, screwed for iron pipe or brass ferrule and fixed complete all as specified and as directed

Supplying, hoisting, fixing and connecting up 2000litres rotational moulded polythylene water storage tanks (cylindrical vertical with closed top), hoisted and fixed in position all as specified in SSR Part-I including connecting the overflow drain out, inlet and outlet pipes, tank nipple, elbow, bend, unions, sockets, etc. including taking down old damaged water tank from any position and disposing off complete all as specified and as directed

Supplying, hoisting, fixing and connecting up 500litres rotational moulded polythylene water storage tanks (cylindrical vertical with closed top), hoisted and fixed in position all as specified in SSR Part-I including connecting the overflow drain out, inlet and outlet pipes, tank nipple, elbow, bend, unions, sockets, etc. complete all as specified and as directed

M&L for taking up/down socketed PVC SWR pipes from any location / position and disposing off complete all as specified and as directed

S&F PVC (SWR) pipes, 110mm bore, single socketed in any length with rubber ring joints fixed on walls with suitable clamps, etc. complete all as specified and as directed

S&F PVC (SWR) pipes, 75mm bore, single socketed in any length with rubber ring joints fixed on walls with suitable clamps, etc. complete all as specified and as directed

Supply and lay PVC SWR pipes 75mm bore in any length for weep holes complete all as specified and as directed

S&F in repairs 110mm bore PVC (SWR) bend of any radius complete all as specified and as directed

S&F 110mm bore PVC (SWR) bend of any radius complete all as specified and as directed

S&F in repairs 75mm bore PVC (SWR) bend of any radius with oval access door complete all as specified and as directed

S&F 75mm bore PVC (SWR) bend of any radius with oval access door complete all as specified and as directed

S&F in repairs 110mm bore PVC (SWR) junction, single (single T) equal or unequal with or without door access complete all as specified and as directed

S&F 110mm bore PVC (SWR) junction, single (single T) equal or unequal with or without door access complete all as specified and as directed

S&F in repairs PVC(SWR) floor trap, 75mm dia outlet, plain with grating including jointing with solvent cement complete all as specified as directed

S&F PVC(SWR) floor trap, 75mm dia outlet, plain with grating including jointing with solvent cement complete all as specified as directed

S&F 110mm dia PVC (SWR) vent cowl complete all as specified and as directed

S&F in repairs 75mm dia PVC (SWR) vent cowl complete all as specified and as directed

S&F 75mm dia PVC (SWR) vent cowl complete all as specified and as directed

E/M WORKS

M&L for fine dry river sand cushioning by laying 8cm thick layer below the cable for making soft bed and 15cm above the cable and then punning down to its consolidated thickness of 18cm after the cable is laid all as specified in SSR Part-I complete all as specified and as directed Note: Only punned thickness of sand shall be considered for measurement purposes

Supply and laying burnt bricks of sub-class 'B' designation 75 of size 230x115x75mm laid in trenches for cable protection complete all as specified and as directed

M&L for cutting into existing GI pipes in position and any location for insertion of tees, tail piece, collars, branch pipes, reducers, etc. at any required length for branch connection, etc. complete all as specified and as directed Notes: (a) Excavation and earthwork will be measured and paid separately under respective items herein (b) Both sides cut shall be measured as one unit

S&F steel water tubing, 25mm bore, medium grade, galvanised with screwed and socketed joints, in any length, including supply and fixing all fittings, ISI marked conforming to IS -1239 and fixed to walls or laid in floors / trenches required for water connections complete all as specified and as directed

S&F gun metal globe or gate valve, 25mm dia, with iron wheel head, screwed both ends for iron pipe and fixed including necessary cutting into existing pipe, threading, inserting new piece of GI pipe of existing size, breaking/cutting into cement concrete, masonry, etc. and making good the disturbed surfaces complete all as specified and as directed

S&F steel water tubing, light grade, galvanised with screwed and socketed joints, in any length, including supply and fixing all fittings, ISI marked conforming to IS -1239 and fixed to walls or laid in floors / trenches required for cable protection, etc. complete all as specified and as directed of the following bores:

20mm bore

25mm bore

Taking down copper / aluminium point wiring (light, fan, socket or power) including fixture and fittings viz. switches, ceiling roses, light fittings, pendants, regulators, sockets, etc. and disposing off complete all as specified and as directed

M&L for point wiring with 1.5sqmm, two single core, FRLS PVC insulated, ISI marked, unsheathed cable 1100V grade, IS-694 marked, with multi-stranded copper conductor, drawn through and including non-metallic heavy duty PVC casing capping not less than 20mm wide and accessories, PVC surface box, surface on walls, ceiling, etc. and including provision of 1.5sqmm copper wire, green colour as earth continuity conductor and connected to common earth dolly complete all as specified and as directed for the following:

One light point controlled by one 5A one way switch

One ceiling fan / exhaust fan point controlled by one 5A one way switch

One switch socket outlet 3 pin 5A controlled by one switch on independent board

M&L for point wiring with 2.5sqmm, two single core, FRLS PVC insulated, ISI marked, unsheathed cable 1100V grade, IS-694 marked, with multi-stranded copper conductor, drawn through and including non-metallic heavy duty PVC casing caping not less than 20mm wide and accessories, PVC surface box, surface on walls, ceiling, etc. and including provision of 1.5sqmm copper wire, green colour as earth continuity conductor and connected to common earth dolly for 3 pin 15A switch socket independent outlet complete all as specified and as directed

M&L for point wiring with 1.5sqmm, two single core, FRLS PVC insulated, ISI marked, unsheathed cable 1100V grade, IS-694 marked, with multi-stranded copper conductor, drawn through and including non-metallic heavy duty PVC conduit not less than 20mm dia and accessories, MS sunken box, concealed in walls, ceiling, etc. and including provision of 1.5sqmm copper wire, green colour as earth continuity conductor and connected to common earth dolly complete all as specified and as directed for the following:

One light point controlled by one 5A one way switch

One switch socket outlet 3 pin 5A controlled by one switch on independent board

M&L for point wiring with 2.5sqmm, two single core, FRLS PVC insulated, ISI marked, unsheathed cable 1100V grade, IS-694 marked, with multi-stranded copper conductor, drawn through and including non-metallic heavy duty PVC conduit not less than 20mm dia and accessories, MS sunken box, concealed in walls, ceiling, etc. and including provision of 1.5sqmm copper wire, green colour as earth continuity conductor and connected to common earth dolly for 3 pin 15A switch socket independent outlet complete all as specified and as directed

S&F ceiling rose surface bakelite 65x50mm, ISI marked, with three terminals complete all as specified and as directed

S&F switch piano flush button type, single pole, ISI marked, one way 5A, 240V complete all as specified and as directed

S&F switch piano flush button type, single pole, ISI marked, one way 15A, 240V complete all as specified and as directed

S&F socket outlet, 2 in 1, 3 pin, 5A, ISI marked, flush type, 230V complete all as specified and as directed

S&F socket outlet, 2 in 1, 3 pin, 15A, ISI marked, flush type, 230V complete all as specified and as directed

S&F socket combination outlet, 5 in 1, 5 pin, 15A flush type, ISI marked, 230V complete all as specified and as directed

S&F PVC / polycarbonate lamp holder, insulated body, bracket holder / angle holder with back plate 240V complete all as specified and as directed

M&L for cutting holes in brick walls suitable for fixing 250mm exhaust fan including finishing all cut internal portions with CM plaster 1:4 and making good the disturbed surfaces complete all as specified and as directed

S&F wall mounted, compact LED batten type light fitting 20W and connecting with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and as directed

S&F wall mounted, compact LED batten type light fitting 20W having 30mins backup (working as regular 20W in normal mode and 4W in backup mode) and connecting with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and as directed

S&F building security light, LED luminaire 25W IP-66 protection class, with 25W LED lamp, driver, etc. with all accessories and including service bracket with 32mm bore GI tubing, light grade, cut and bent to shape required, 1.2m long, including bends, flat iron clamps made of FI 40x6mm, nuts, bolts, washers, etc. as required duly painted with two coats of synthetic enamel paint over a coat of red oride zinc chrome primer (cost shall be included) complete all as specified and as directed

S&F heavy duty, PVC body with PVC blades, legs, ISI marked energy efficient BEE five star rated exhaust fan, 250mm sweep, 230V, 50Hz, 1200RPM, copper wound, with louvers and connecting up including provision of three core flexible copper wire of size 1.5sqmm from ceiling rose to exhaust fan including grouting the nuts and bolts including taking down old / unserviceable fan any type and disposing off complete all as specified and as directed

S&F heavy duty, steel body with steel blades, legs, ISI marked energy efficient BEE five star rated, 230V, 50Hz, 1200RPM, exhaust fan, 300mm sweep with louvers and connecting up including provision of three core flexible copper wire of size 1.5sqmm from ceiling rose to exhaust fan including grouting the nuts and bolts and making good the disturbed areas and surfaces complete all as specified and as directed

S&F electric water heaters (geysers), stainless steel body, 25litres capacity, storage type, vertical mounting, with glass lined inner tank, energy efficient 5 star rated of approved design and colour, including all necessary clamps, grouting duly with holding bolts & nuts and all necessary connections at locations including taking down old unserviceable geysers of any capacity after disconnecting electric & water connections and depositing in MES store yard complete all as specified and as directed

S&F sheet metal enclosures for 8 way MCB DB, 240V, SPN, double door, IP 43 protection class conforming to relevant IS, with 200A rated insulated aluminium bus bar, neutral link, DIN rail, blanking plates, etc. duly flushed in wall and making good the disturbed surfaces including taking down of old enclosure and disposing off complete all as specified and as directed

S&F sheet metal enclosures for 4 way MCB DB, 240V, SP, double door, IP 43 protection class conforming to relevant IS, with 200A rated insulated aluminium bus bar, neutral link, DIN rail, blanking plates, etc. duly flushed in wall and making good the disturbed surfaces including taking down of old enclosure and disposing off complete all as specified and as directed

Supply, fixing, commissioning and testing of XLPE insulated, screened, PVC bedded, galvanised steel strip or wire armoured, electric power cable (heavy duty) with aluminium conductors, 1100V grade 2 core 6sqmm laid in trenches/fixed to wall/under road/drawn through pipes etc. with copper cable glands and copper thimbles complete all as specified and as directed

Supply, fixing, commissioning and testing of XLPE insulated, screened, PVC bedded, galvanised steel strip or wire armoured, electric power cable (heavy duty) with aluminium conductors, 1100V grade 4 core 16sqmm laid in trenches/fixed to wall/under road/drawn through pipes etc. with copper cable glands and copper thimbles complete all as specified and as directed

Taking down old unserviceable submain wiring of any type, any size, from any location or position, carefully without disturbing existing fittings/fixtures and disposing off including making good the disturbed surfaces, etc. complete all as specified and as directed

M&L for submain wring using proper colour coding with 2 runs of single core, PVC insulated, FRLS unsheathed suitable for 1100V, multistranded, copper conducter cable of size 4sqmm and 1 run of 2.5sqmm multistranded, copper conductor cable 1100V green colour for earth conductor drawn through and including PVC casing capping 20mm wide, heavy duty, ISI marked concealed in wall/ceiling/roof, etc. with all required accessories complete all as specified and as directed Notes: (i) 2 runs of 4sqmm main cable, 1 run of earth conductors and 1 run of PVC casing/capping shall be measured as one length (ii) Separate casing shall be used for each sub-main wiring circuit irrespective of numbers of wire (iii) The minimum size of casing shall be as stipulated, however higher sizes shall be used as per number of cables passing through. The Engineer-in-charge shall ensure for proper size of casing as per requirement at site

S&F MCB SP, 240V, 5 to 32A, 10kA, 50Hz, C curve complete all as specified and as directed

S&F in repairs MCB SPN, 240V, 32A, 10kA, 50Hz, C curve complete all as specified and as directed

S&F MCB SPN, 240V, 40 to 63A, 10kA, 50Hz, C curve complete all as specified and as directed

M&L for breaking down old unserviceable earthing including pits in any location / position and disposing off complete all as specified and as directed

M&L for earthing using GI earthing wire with galvanised steel earth plate electode 600x600x6mm thick buried directly in ground, earth pit not less than 2.25m deep below ground level connection to and including GI earth lead wire 4mm dia extended to 7.5m as earth lead by means of GI bolts, nuts, etc. with provision of charcoal and salt all as per electrical plate No. 3 of SSR Part-I including water arrangement with GI pipe 20mm dia (medium grade), earth lead protection pipe 15mm light grade with bends, elbow, etc. from earth plate to test point, excavation and earthwork in any type of soil, returning, filling, ramming and removing of soil to distance not exceeding 50m, make good to match with existing surface making PCC pit (earth chamber) having internal size 300x300x300mm and outer size 600x 600x600mm with 10mm thick CI earth pit cover with handle, duly hinged in mild steel angle iron frame of size 300x300x300mm made out of MS angle iron of size 40x40x6mm thick duly fixed and entirely painted with two coats of synthetic enamel paint over one coat of red oxide zinc chrome primer and testing on completion including making test points on wall as per SSR specifications complete all as specified and as directed

Notes for serial item No. 198: (i) The cost of GI earth continuity wire / strip with GI pipe 20mm medium grade upto 7.5m is deemed to be included (ii) The earth chamber to be constructed 0.5m from edge of earth pit with necessary watering arrangement. The cost for the same is deemed to be included in above item (iii) Earthing shall produce desired earth resistance values as directed by the Engineer-in-charge

MS AFTAB LASKAR

M/S TAPAN KUMAR RAY

M/S SUBHAM ENTERPRISE

M/S R A ENTERPRISE

M/S M P Sharma

M/S PIJUSH BHATTACHARJEE