Maintenance and Reparing work of various Municipal Buildings in Sub Zone - 02 in South Zone - A (Udhna), Surat.

DTS No. Item Qty. (Without GST Per Amount (Rs.)

Part -A Civil Work.

1 Demolition Dismentling door, windows, ventilators etc. (wood or steel)

5 shutters including chowkhats architraces, holdfasts and other

attacement etc. complete and stacking them within all lead and

lift. (i) Not exceeding 3 Sq.M. in area.

2 Demolition Demolition including stacking of serviceable materials with all

(i) RCC work 10.00 1,057.47 C.M.

3 Demolition Demolition of brick work and stone masonary including

2 stacking of serviceable materials and disposal of unserviceable

materials with all lead & lift.

(II) On Cement mortar. 10.00 550.40 C.M.

4 Demolition Removing and scraping of old deteriosted plaster of any

3 thickness from wall/R.C.C. member including strcking of

serviceable material and disposal of unserviceable from site of

work with all lead and lift.

5 Demolition Dismentalling Of sheet roofing including

7 ridge,Hips,Vallys,Gutter etc.stacking of serviceable materials

and disposal of unserviceable materials with all lead & lift. (I)

6 Demolition Dismantling doors windows ventilators etc. (wood or steel)

6 shutters including chowkhats, Architraves, holdfasts and other

attachment etc. comp. and stacking them within all lead & lift.

(I) exceeding 3 sq.m. in area.

7 Demolition Dismantling sanitary fittings like wash basin, w.c. pan Indian

24 and Europeans type, flushing tank etc. including stacking the 5.00 405.65 No.

materials with all lead & lift.

8 Demolition Dismantling PVC pipe / A.C Rainwater /G.I pipes pipes with

17 fittings and clamps including stacking the materials with all 5.00 74.77 R.M

lead and lift. (For all floors).

9 Demolition Dismentaling tiled of stone floors laid in mortar including

10 stacking of serviceable materilas and disposal of

unserviceable materials with all lead and lift.

Kota stone flooring and steps 5.00 47.72 S.M.

10 Demolition Dismentalling barbed wire in fencing including making rolls

23 and also including dismentaling fencing posts including all

earth work concrete in base and making good the disturbed

ground staking useful materials as directed and disposing as

directed and of the unserviceable materials with all lead and

11 Self.Expl. Dismentalling G.I. chain link fencing including making rolls

and also including dismentaling posts including all earth work

concrete in base and making good the disturbed ground staking 0.00 21.19 S.M. -

useful materials as directed and disposeing of the unserviceable

materials with all lead and lift.

12 Self.Expl. Dismentalling of Bombay type Railing including dismentaling

posts making good the disturbed ground staking useful

materials as directed and disposeing of the unserviceable

materials with all lead and lift.

13 Self.Expl. Refixing of old Bombay type Railing including cutting,

welding etc comp...

14 94 Boring holes 3.5 mt.deep in ordinary soil ( for cast in situ piles)

& disposal of the surplus excavated soil as directed within a

lead of 50 M. For following diameter of piles.

DTS No. Item Qty. (Without GST Per Amount (Rs.)

15 Excavation for foundation includ.sorting out & stacking of

useful materials & disposing of the excavated stuff upto 50 mt.

Lead & all lift, watering etc. Comp.

1 Executed With Mechanised effort/ Machinaries

(A) Loose or Soft soil

(1) Up to 1.5 Mt. depth 15.00 117.26 C.M.

2 Executed With Manual Labour

(A) Loose or Soft soil

(1) Up to 1.5 Mt. depth 25.00 203.83 C.M.

16 3 Providing & Laying C.C1:5:10 (1cement :5coarse sand :10

graded stone agg. 40 m.m Nominal size) & curing comp. incl. 15.00 2,517.44 C.M.

cost of from work in :Foundation & Plinth

Providing & laying cement concrete 1:4:8 (1 cement:4 sand:8

graded stone agg. 40 mm nominal size) & curing comp. 30.00 2,680.21 C.M.

Excl.cost of form work in (A) Foundation and Plinth

18 5 Providing & laying C.C 1:3:6 (1cement :3 coarse sand :6

Crushed stone agg 20m.m Nominal size) & curing comp. excl. 15.00 3,005.76 C.M.

cost of form work in :(a) foundation & Plinth

Providing & laying cement concrete 1:1.5:3 (1 cement:1.5

sand:3 graded stone agg. 20 mm nominal size)& curing comp.

Includ.cost of form work but exclu. Cost of reinforcement for 10.00 4,146.15 C.M.

reinforced concrete work in : (A) Foundation, footing, Base

of columns and Mass concrete.

20 7 Providing & laying ordinary cement con.1:1.5:3

(1cement:1.5sand: 3 graded stone agg. 20 mm nominal size)

finishing smooth curing etc. comp. Incld. Cost of form work

but excl. Cost of reinforcement for R.C.C. Work in : Up to

(1)Having c/s area up to 0.085 sq.mt 5.00 12,632.60 C.M.

(2) Having c/s area more than 0.085 sq. mt. & upto 0.12 sq.mt 5.00 11,166.97 C.M.

(3) Having cross sectional area more than 0.12 sq. mt. 2.00 9,201.68 C.M.

(1)Having c/s area up to 0.08 sq.mt 5.00 9,102.61 C.M.

(2) Having c/s area more than 0.08 sq. mt. & upto 0.12 sq.mt 5.00 8,174.41 C.M.

(3) Having cross sectional area more than 0.12 sq. mt. 2.00 7,086.88 C.M.

21 8 Providing & fixing IS Mark TMT Bar FE 500 / FE 500d

reinforcement for R.C.C. work incl. bending, binding & 200.00 76.21 Kg.

placing in position etc.comp.--- G.L./P.L.

22 9 Brick work using common burnt clay building bricks having

crushing strength not less than 35 kg./Sq.Cm. in foundation and

plinth in Cement Mortar 1:6 (1- Cement : 6 -fine sand)(C) Fly

23 10 Filling available excavated earth (excluding rock) in trenches.

plinth, sides of foundations etc. in layers not exceeding 20 cm.

in depth consolidating each disposited layer by ramming and 10.00 130.39 C.M.

24 11 Filling in foundation and plinth with murrum or selected soil in

layers of 20cm. thickness including watering, ramming and

consolidating etc. complete.

25 12 20mm thick sand faced cement plaster on walls upto height

metres above ground level consisting of 12mm thick backing

coat of C.M. 1:3 (1-cement : 3-sand) and 8mm thick finishing 50.00 330.88 S.M.

coat of C.M. 1:1 (1-cement : 1- sand) etc. complete.

DTS No. Item Qty. (Without GST Per Amount (Rs.)

26 13 Providing & laying ordinary cement

con.1:1.5:3(1cement:1.5sand:3 graded graded stone agg.

mm nominal size) finishing smooth curing etc. comp. Incl..

Cost of form work but excl. Cost of reinforcement for R.C.C.

(1) Having c/s area up to 0.085 sq.mt

Ground Floor 2.00 12,632.60 C.M.

First Floor 1.00 12,672.24 C.M.

Second Floor 0.00 12,711.88 C.M. -

Terrace (third) Floor 0.00 12,751.53 C.M. -

(2) Having c/s area more than 0.085 sq. mt. & upto 0.12 sq.mt

Ground Floor 2.00 11,166.97 C.M.

First Floor 1.00 11,206.61 C.M.

Second Floor 0.00 11,246.25 C.M. -

Terrace (third) Floor 0.00 11,285.89 C.M. -

(3) Having cross sectional area more than 0.12 sq. mt.

Ground Floor 2.00 9,201.68 C.M.

First Floor 1.00 9,241.32 C.M.

Second Floor 0.00 9,280.96 C.M. -

Terrace (third) Floor 0.00 9,320.61 C.M. -

(1) Having c/s area up to 0.085 sq.mt

Ground Floor 2.00 9,102.61 C.M.

First Floor 1.00 9,142.25 C.M.

Second Floor 0.00 9,181.89 C.M. -

Terrace (third) Floor 0.00 9,221.53 C.M. -

(2) Having c/s area more than 0.085 sq. mt. & upto 0.12 sq.mt

Ground Floor 2.00 8,174.41 C.M.

First Floor 1.00 8,214.05 C.M.

Second Floor 0.00 8,253.69 C.M. -

Terrace (third) Floor 0.00 8,293.33 C.M. -

(3) Having cross sectional area more than 0.12 sq. mt.

Ground Floor 2.00 7,086.88 C.M.

First Floor 1.00 7,126.52 C.M.

Second Floor 0.00 7,166.16 C.M. -

Terrace (third) Floor 0.00 7,205.81 C.M. -

(1) Slabs having more than 8cm. and upto 10 cm. Th'.

Ground Floor 2.00 7,984.42 C.M.

First Floor 1.00 8,024.06 C.M.

Second Floor 0.00 8,063.70 C.M. -

Terrace (third) Floor 0.00 8,103.34 C.M. -

(2) Slabs having more than 10 cm. & upto 13 cm. Th'.

Ground Floor 2.00 7,396.96 C.M.

First Floor 1.00 7,436.60 C.M.

Second Floor 0.00 7,476.24 C.M. -

Terrace (third) Floor 0.00 7,515.89 C.M. -

(3) Slabs having more than 13 cm. Thickness

Ground Floor 2.00 6,813.01 C.M.

First Floor 1.00 6,852.65 C.M.

Second Floor 0.00 6,892.29 C.M. -

Terrace (third) Floor 0.00 6,931.94 C.M. -

Ground Floor 2.00 9,531.24 C.M.

First Floor 1.00 9,570.88 C.M.

Second Floor 0.00 9,610.53 C.M. -

Terrace (third) Floor 0.00 9,650.17 C.M. -

Ground Floor 2.00 5,512.83 C.M.

First Floor 1.00 5,552.47 C.M.

Second Floor 0.00 5,592.11 C.M. -

Terrace (third) Floor 0.00 5,631.76 C.M. -

DTS No. Item Qty. (Without GST Per Amount (Rs.)

27 14 Providing & laying ordinary cement

con.1:1.5:3(1cement:1.5sand:3 graded graded stone agg.

mm nominal size) finishing smooth curing etc. comp. Incl..

Cost of form work but excl. Cost of reinforcement for R.C.C.

(A) Stair cases including landings etc

Ground Floor 1.00 7,380.20 C.M.

First Floor 1.00 7,419.85 C.M.

Second Floor 0.00 7,459.49 C.M. -

Terrace (third) Floor 0.00 7,499.13 C.M. -

(B) Vertical and horizontal fins

Ground Floor 1.00 10,831.75 C.M.

First Floor 1.00 10,871.40 C.M.

Second Floor 1.00 10,911.04 C.M.

Terrace (third) Floor 0.00 10,950.68 C.M. -

28 15 Providing & fixing IS Mark TMT Bar FE 500 / FE 500d

reinforcement for R.C.C. work incl. bending, binding &

placing in position etc.comp.

Ground Floor 150.00 76.21 Kg.

First Floor 90.00 77.21 Kg.

Second Floor 0.00 78.21 Kg. -

Terrace (third) Floor 0.00 79.21 Kg. -

29 16 Brick work using common burnt clay building bricks having

crushing strength not less than 35 kg./Sq.Cm. in Cement

Mortar 1:6 (1- Cement : 6 -fine sand)(C) Fly Ash Bricks

Ground Floor 15.00 4,511.97 C.M.

First Floor 10.00 4,786.95 C.M.

Second Floor 0.00 5,061.92 C.M. -

Terrace (third) Floor 0.00 5,379.24 C.M. -

30 17 Half brick masonry in common brunt clay building bricks

having crushing strength not less than 35 Kg/Sq.Cm. in Cement

mortar 1:4 (1- Cement : 4 - coarse sand ) in foundation and

plinth (C)Fly Ash Bricks

Ground Floor 10.00 678.86 S.M.

First Floor 10.00 631.79 S.M.

Second Floor 0.00 638.04 S.M. -

Terrace (third) Floor 0.00 644.29 S.M. -

31 18 Uncoursed rubble masonary with hard stone of approved

quality in foundations and plinth in cement mortar 1:6 (1 5.00 2,500.01 C.M.

Cement : 6 sand) including leveling up etc. complete.

32 19 Pointing on Coursed stone masonary with cement mortar 1:3 (1

cement : 3 Sand) ---

(A) Flush Pointing 0.00 97.04 S.M. -

(B) Ruled Pointing 0.00 100.22 S.M. -

33 20 Pointing on Uncoursed stone masonary with cement mortar 1:3

(1 cement : 3 Sand) ---

(A) Flush Pointing 0.00 104.99 S.M. -

(B) Ruled Pointing 0.00 108.81 S.M. -

34 21 Providing Rubble Pitching with hard stone of approved

quality in cement mortar 1:6 (1 Cement : 6 Coarse sand) 1.00 2,550.00 C.M.

including leveling up ,Curing etc. complete excluding pointing

35 22 Providing and filling rubbles including hand packing and

filling interstices withquarry spalls behind abutments and 1.00 1,064.80 C.M.

between returns as directed.

36 23 Providing upto floor two level precast cementconcrete jali or

grill 1:2:4 mix (1-Cement : 2- coarse sand : 4-graded stone

aggregate 6mm nominal size)reinforced with 1.6 mm dia. Mild

steel wire including roughening,cleaning,fixing and finishing in

cement mortar 1:3 and curing complete. (B) 40mm thick.

Ground Floor 5.00 706.60 S.M.

First Floor 1.00 716.63 S.M.

Second Floor 0.00 726.65 S.M. -

Terrace (third) Floor 0.00 736.68 S.M. -

DTS No. Item Qty. (Without GST Per Amount (Rs.)

37 24 Providing & Applying 10mm.th.cement plaster in single coat

on brick/ concrete walls similar surfaces for plastering &

finished even & smooth with a floating coat of cement slurry

mixed with admixture of lime or neeru in required proportion

etc. comp. in C.M 1:3 (1 cement : 3sand)

(A) For wall and similar surfaces

Ground Floor 50.00 189.79 S.M.

First Floor 40.00 217.93 S.M.

Second Floor 0.00 246.07 S.M. -

Terrace (third) Floor 0.00 274.20 S.M. -

(B) For ceilings & soffits of stairs

Ground Floor 45.00 214.60 S.M.

First Floor 15.00 242.74 S.M.

Second Floor 0.00 270.88 S.M. -

Terrace (third) Floor 0.00 299.02 S.M. -

20mm thick sand faced cement plaster on walls for height more

than 10metres above ground level consisting of 12mm thick

backing coat of C.M. 1:3(1-cement : 3-sand) and 8mm thick

finishing coat of C.M. 1:1 (1-cement : 1-sand) etc. complete.

39 28 Providing & Applying 20mm. Th. Heavy Roller plaster on

walls or similarsurfaces at all floor levels consisting of 12 mm

av. Th. Backing coat of C.M.1:3 (1 cement:3 sand) & 8 mm.

th. Finishing coat of C.M. 1:1 (1 cement: 1sand) apply thick

cement slurry and apply roller horizontal as well as vartical

(two times ) up to good quality and size of grain in elevation as

per directed by

engineer incharge.

40 29 Providing throating or plaster drip and moulding it to R.C.C.

chajja etc.comp.. For all floor

41 30 Providing 20 mm deep finished groove in plaster in line and

level etc. Comp. For all Floor (M.R.)

42 32 Providing and laying polished Kota stone slab flooring over

20mm (Average)thick base of cement mortar 1:6 (1-cement : 6-

coarse sand) orL.M. 1.1.5 (1-Lime putty :1.5 - coarse sand)

laid over and jointed with greycement slurry mixed with

pigment to match the shade of slab including

rubbing and polishing etc. complete. (A) 25mm thick

43 33 Providing and laying polished kota stone slab 25mm thick in

risers ofsteps,skirting Dedo and pillars laid on 10mm thick

cement mortar 1:3 (1-Cement : 3 coarse sand) and jointed with

gray cement slury mixed withpigment to match the shade of

slab including rubbing and polishing etc.

44 34 Providing & Laying white glazed tiles 6mm. th. of Orient,

Kajaria, Jhonson,Nitco,Somani ,Bell make at all floor levels,

in flooring, treads of steps & landings laid on a bed of

mm. Av. Th.C.M.1:3(1cement :3 sand) finished with flush

pointing in white cement etc.com. For all floors

(Basic Rate:- Rs.285.0/S.M.)

45 35 Providing & Laying white glazed tiles 6mm. th. Of Orient,

Kajaria, Jhonson,Nitco,Somani,Bell make at all floor levels in

skirting risers of steps & dado on 10 mm. th.

C.M.1:3(1cement :3 sand) including necessary cement paste 20.00 887.64 S.M.

for fixing and joined with white cement slurry etc. complete.

(Basic Rate:- Rs.285.0/S.M.)

46 36 Providing and laying Ceramic tiles 6 mm th. in flooring

treads of steps and landing laid on bed of 12 mm thick

cement mortar 1:3 (1 Cement : 3 Sand) finished with flush 20.00 914.69 S.M.

pointing in white cement.

(Basic Rate:- Rs.306.0/S.M.)

47 37 Providing & Laying ceramic tiles 6mm th. in skirting, risers

of steps and landings laid on 10mm thick cement mortar 1:3

(1 Cement : 3 sand) pointing in white cement and jointed with 22.00 987.86 S.M.

(Basic Rate:- Rs.360.0/S.M.)

DTS No. Item Qty. (Without GST Per Amount (Rs.)

Providing & laying marble stone slab flooring over

mm.av. base of C.M.1:6 ( 1 cement :6 coarse sand ) & jointed

with grey cement slurry incl. rubbing & polishing comp.(A)

Marble slab 25 mm. Thick. (Basic Rate :- Rs.701 / S.M.)

49 39 Providing & laying granite slab 18mm thick in flooring,

treads of steps and landing laid on bed of 20mm thick

cement mortar 1:6 (1 Cement : 6 coarse sand) or lime mortar

1:1.5 laid and finished with flush pointing in white or colour

cement including rubbing and polishing complete. (Basic Rate:-

50 40 Providing & laying granite slab 18mm thick in skirting,

risers of steps, dedo and pillars laid on 10mm thick cement

mortar 1:4 (1 Cement : 4 Coarse sand) and finished with flush 7.00 2,449.00 S.M.

pointing in white or colour cement including rubbing &

polishing comp.. (Basic Rate:- Rs.1347.46/S.M.)

51 41 Providing & laying granite slab 18mm thick in Window-

Door seal Frame Etc laid on 10mm thick cement mortar 1:4

(1 Cement : 4 Coarse sand) with nessary adhesive material and

finished with flush pointing in white or colour cement,

including rubbing & polishing comp.. (Basic Rate:-

52 Self.Expl. Labour Charges For Half Round Edge For Granite 10.00 127.12 R.M.

53 Self.Expl. Labour Charges For Quater Round Edge For Granite 10.00 76.27 R.M.

54 42 Labour Charges For Edge Finished For Granite 80.00 43.43 R.M.

55 43 Providing & laying Vitrified tiles of 8mm thick of Orient,

Kajaria, Jhonson,Nitco, Somani, Bell, Asian or Euro make in

flooring,treads of steps &Landing laid on bed of 20 mm

(Average) base of cement mortar 1:6 (1Cement : 6 Coarse

sand) on new surface or fixing on existing flooring byadhesive 30.00 1,397.83 S.M.

material including dismentaling of existing flooring and jointed

withcolour cement slurry including finished with flush pointing

& cleaning the surface etc. comp.Size 24" x 24" For Antiskid

56 45 Providing and laying Vitrified tiles 8 to 10 mm thick, 24" x

24" in skrting risers of steps and dedo on 10mm thick cement

plaster 1:3 (1 cement : 3 coarse sand) and jointed with white 30.00 1,081.71 S.M.

57 44 Providing and laying Vitrified tiles 8 to 10 mm thick, 24" x

24" in flooring treads of steps and landing laid on a bed of

12mm thick cement mortar 1:3 (1 cement : 3 coarse sand)

finishing with flush pointing in white cement.

Providing and laying chequered precast concrete tiles 22mm

thick with aggregate of sizes upto 6mm in floors treads of steps

and landing on 20mm thick bed of C.M. 1:6 (1 cement : 6 10.00 528.01 S.M.

sand) or L.M. 1:1.5 (1 Lime putty : 1.5 sand) jointed with neat

cement slurry with pigments to match the shade of the tiles.

59 M-49 Providing & Laying polished kota stone of machine cut edge

patti of 10cm wide 22 mm. thk. in ramp flooring as per design,

laid on 10 mm. th. C.M.1:3(1cement :3 sand) including 0.00 - R.M. -

necessary cement paste for fixing and joined with cement

slurry etc. complete. For all floors.

60 122 Providing and constructing sandwitch type Polish Kota Stone

cookingplatform 0.6 mt. wide & 0.75 mt. height, including one

end side Polish Kotastone (Double Polish) of 1.25 mt. height

& front Polish Kota stone patti of

cm wide, vertical partitions of half B.M. wall in C.M. 1:4 and

10mm th. plasterin 1:3 with finishing smooth with cement

slurry as required and Stainless Steelsink of 0.45 mt x 0.45 mt

size of approved quality and make with required allfitings &

fixitures etc. comp as per instruction given by site in charge at

DTS No. Item Qty. (Without GST Per Amount (Rs.)

61 51 Providing & fixing 35mm.th. Flush Door Solid Double Core

type Both Face water proof Ply Vennered & 1.5 mm

th.laminate shall be pasted on both side with adhesives as

specified by the manufacturers. The laminate shall be as per

approved shade & texture, of make incl. Sal wood frames of

finished size 12cm x 7cm.incl. S.S. Hinges with nessary

screws & Anodized aluminum fixtures & fastenings For all

Same as Above But Without Frame 10.00 2,520.00 S.M.

62 53 Providing & fixing 35mm.th. Indian teak wood shutters for

doors, windows & clearstory windows incl. Indian teak wood

frames of finished size 12cm x 7cm.incl. anodized aluminum

fixtures & fastenings incl. Primer coat of approved quality &

two coats of oil painting etc. For all Floor

(A) Fully Panelled 5.00 5,533.68 S.M.

(B) Partly Panelled and Partely Galzed 5.00 5,185.03 S.M.

(C) Fully Galzed 5.00 4,551.69 S.M.

Providing and laying cement concrete flooring 1:2:4 (1 cement

: 2course sand : 4 graded stone aggregate 20mm nominal size)

laid in one layer finished with a floating coat of neat cement

A) 40mm thick 5.00 303.84 S.M.

(B) 50mm thick 5.00 356.33 S.M.

64 Self.Expl. Providing and fixing sal wood frame 12 cm x 7 cm size

including anodized fixtures and fastening etc. including primer

coat of approved quality and two coats of oil paint.etc

complete. (For all floors)

65 Self.Expl. Providing and fixing sheet glass of good quality badded in

putty and fixed with wooden beadings incldg.the cost of first

class teak wood beading and necessary cutting of glass etc. in

the place of damaged/broken sheet glass of the existing

windows /ventillations etc. as shown & as ditrected by

Engineer-in-charge.(For all floors)

(a) 4 mm plain glasss 5.00 613.70 S.M.

(b) 6 mm wired figured glasss 5.00 551.22 S.M.

66 Self.Expl. Providing and Replace door, Window S.S. Fixtures fix in

wooden / Alluminium door - window

(A) S.S. Stopper 60 Cm long of ASIS 304 5.00 363.77 No.

(B) S.S. Stopper 30 Cm long of ASIS 304 5.00 182.31 No.

(C) S.S. Stopper 20 Cm long of ASIS 304 5.00 127.53 No.

(D) S.S. Aldrop 20 Cm long of ASIS 304 Grade 5.00 218.26 No.

(E) S.S. Aldrop 25 Cm long of ASIS 304 Grade 5.00 327.82 No.

(F) S.S. Aldrop 30 Cm long of ASIS 304 Grade 5.00 400.58 No.

(G) S.S. Handle for door/ window 10 Cm size of ASIS

(F)S.S. Handle for Door 15 Cm size of ASIS 304 Grade 5.00 76.18 No.

(I) S.S. Pipe Handle for door 30 Cm size o ASIS 316 Grade 5.00 873.05 No.

(J) Inter Lock [Kadaka lock] 5.00 209.70 No.

(H) Locks Godrej Mortice lock cover 5.00 329.53 No.

(I) Door closers arrow type with spring 12 length as approved

sample (30 cms)

(J)Handle for doors Windows Cupboards etc. Brass 15 cms.

(K) S.S. Door / window hinges 4x1"x1" 5.00 54.78 No.

67 Allumi. w Providing and fixing window having extruded aluminium

no2 Powder Coated section frame main outer size 95 mm x

mm x 1.17 mm (of jindal section no:2459 @ Wt. of

Kg/mt), horizontal Three track member size 92 mm x

mm x 1.30 mm (of jindal section no;8688, @ Wt. 1.07 Kg/mt),

vertical member of size 92 mm x 31.75 mm x 1.50 mm (of

jindal section no:8933, @ Wt. 1.06 Kg/mt) with sliding

shutters of horizontal member size 40 mm x 18 mm x 1.29 mm

(of jindal section no:8947 @ wt. of 0.456 kg/mt), vertical

member of size 40 mm x 18 mm x 1.29 mm (of jindal section

no:8949 @ wt. of 0.456 kg/mt) with 5 mm thick transparent

bronze colour tinted float glass with powder coated aluminium

fittings & fixtures and transparent silicon sealant glass fixing to

frame as per details etc.

(A) Same as above but Colour anodized 5.00 1,591.87 S.M.

DTS No. Item Qty. (Without GST Per Amount (Rs.)

Providing and fixing window having extruded aluminium

Powder Coated section frame main outer size 63.50 x

x1.95 mm (of Jindal section no.4605, @ Wt. 1.094Kg/mt)

horizontal Two track member size 61.85 mm x 31.75 mm x

1.20 mm (of jindal section no:8687, @ Wt. 0.695 Kg/mt.)

vertical member of size 61.85 mm x 31.75 mm x 130 mm (of

jindal section no:8758 @ wt. of 0.659 kg/mt) with sliding

shutters of horizontal member size 40 mm x18 mm x 1.29 mm 5.00 1,705.67 S.M.

( of jindal section no:8949, @ Wt. of .456 Kg/mt) vertical

member of size 40 mm x 18 mm x 1.29 mm (of jindal section

no:8947, @ Wt. of 0.456 Kg/mt/section 8948, @ Wt. of

Kg/mt) with 5 mm thick tranparent bronze colour tineted float

glass with powder coated aluminium fittings and fixtures and

transparent silicon sealant glass fixing to frame as per details

etc. complete for window.

(A) Same as above but Colour anodized 5.00 1,705.67 S.M.

Providing and fixing standared extruded ofalluminium section

of size 63mm x38.10mm x1.2mm , @ Wt. 0.643 Kg/mt with

colour PowderCoated alluminium frame for ventilation with

5mm thick frosted glass as details etccomplete forVentilation

(A) Same as above but Colour anodized 5.00 2,414.00 S.M.

no5 Providing and fixing standared extruded of aluminium section

of size 61 x 37.0 x0.90 mm (of Jindal section no.14080, @

Wt. 0.471 Kg per mt) with Powder Coated alluminium frame 2.00 2,336.00 S.M.

with 5 mm thick transparent bronze colour tinted float glass as

details etc. complete for fix window.

(A) Same as above but Colour anodized 2.00 2,336.00 S.M.

Providing & fixing partly panel & partly glass Powder Coated

Aluminium doors with aluminium section of Hindalco, Jindal

, Narmada,Banco or Equivalent approved make having Poder

Coated outer frame Leg Partition section of 63.50 mm x

38.10 mm having weight 1.158 kg. / R.M. shutter section

having size 83.5 mm x 44.45mm ( top & bottom:

kg./rmt. and middle 1.139 kg./rmt.) door vertical 47.62mm x 5.00 3,237.00 S.M.

44.45 mm ( vertical:0.881 kg./rmt. & top hing side:0.974

kg./mt.), Glazing Clip (Jindal Section No. 19370 Wt.

Kg./ Mt.) with 5mm thick sheet glass in acid frogting and

mm thick prelaminated sheet of Greenlam, Panama or archid

make as approved by Engineer-in-charge including fixing brass

pivot, handle, lock etc. complete.

(A) Same as above but Colour anodized 5.00 3,237.00 S.M.

Providing & fixing Powder Coated Aluminium partly

glazed and partly panelled partition using medium duty

sections of Hindalco,Zindal, Narmada, Banco or Equivalent

approved make having section 63.50 mm x 38.10mm ( Frame-

.758 kg/rmt & Middle section- 0.819 Kg./rmt), Galzing Clip

with 5 mm thick clear float glass of approved make including

all other necessary fittings and fixtures. Entire work will have

to be made water proof using necessary rubber sectioned

wherever required. Gaps all round the frame to be filled with

approved water proof sealent. Bottom portion of doors both

side to be covered with 12mm thick prelaminated particle

board of approved make and quality and as per design.

(A) Same as above but Colour anodized 5.00 2,400.00 S.M.

DTS No. Item Qty. (Without GST Per Amount (Rs.)

73 55 Providing and fixing FRP FRAME size 125 x 65 mm and

mm thick FRP shutter with wood grain raised panneled

design finish shutter having extra reinforcement on sides &

edges in Gel coat finish. The core of the shutter & frmae is to

be filed up with injected polyurethene foam done in situ along

with embedded wooden pieces for stiffening & also taking

hinges & fixtures. The whole FRP frame & shutter is to be

water proof weather proof,termite proof &resistance to mild

acid/alkali. Rates are to be inclusive of S.S.hinges with fastener

sleeve & alluminium fixtures & fastentings. Product should

have 3 years performance guarantee and company have ISO

9001-2000 certificate.

74 Self.Ex pl. Reparing & Servicing of existing door/window including cost

of hardware (Fevicol,Nail and NF screw etc.) but excluding

cost of fixtures as directed by Engineer in-charge.

(A) Wooden door 10.00 150.00 Nos.

(B) Partly Panelled and Partely Galzed alluminium door 10.00 150.00 Nos.

(C) Wooden Window shutter 10.00 75.00 Nos.

(D) Alluminium Window shutter 10.00 75.00 Nos.

75 Self.Ex pl. Providing & fixing Glass Table Top using 08mm th.clear glass

with crystal edge & necessary hardware materials etc. complete 5.00 1,101.69 S.M.

as per instruction by engineer in charge.

76 Self.Ex pl. Providing & fixing door closer Ozon / Dorma / Hyper /

Hardwin / Godrej / Alluminium body ISI brander equivalent

make with necessary hardware materials etc. complete as per

instruction by engineer in charge.

77 Self.Ex pl. Providing & fixing water proof plywood (ISI marks 710 grade)

at the door,window and any space in the building. necessary

hardware,screws materials etc. complete as per instruction by

engineer in charge.

(F) 12 mm BSL partical board green or Equalent make 2.00 415.25 S.M.

(G) 12 mm plan E board Evrest or Equalent make 2.00 381.36 S.M.

Providing & fixing laminated sheet 1mm thick suede finished

Self.Ex pl. as per approved make with & necessary adhesive,hardware 5.00 449.15 S.M.

materials etc. complete as per instruction by engineer in charge.

79 Self.Ex pl. Providing & fixing Mortise lock body with 70mm cylinder

(make godrej / ozon / inox ) fix in wooden door with

necessary hardware materials etc. complete as per instruction

by engineer in charge.

80 Self.Ex pl. Replacement of Revolving chair parts ISI marks with necessary

hardware, screws materials etc. complete as per instruction by

engineer in charge.

(A) P.V.C. moulded Hand rest 5.00 254.24 Nos.

(B) Hydraulic gas pump 5.00 423.73 Nos.

(C) Cushion sheet, back with fabric / rexine 5.00 1,398.31 Nos.

(D) Rubber castor / wheels 5.00 67.80 Nos.

81 Self.Ex pl. Reparing & Servicing of wooden office table / file storage

using screws and necessary hardware materials complete as 5.00 144.07 Nos.

per instruction by engineer in charge.

82 Self.Ex pl. Replacement of wooden office table / file storage parts ISI

marks with necessary hardware, screws materials etc.

complete as per instruction by engineer in charge.

(A) Drawer / shutter locks 5.00 144.07 Nos.

(B) ss 4" D Handles 5.00 59.32 Nos.

(C) Drawer channel 5.00 228.81 Nos.

(D) ss 3" heavy hinges 5.00 59.32 Nos.

83 Self.Ex pl. Providing & laying sun control or frosted milky glass film as

approved colour,design,cutting complete as per instruction by 10.00 381.36 S.M.

engineer in charge.

DTS No. Item Qty. (Without GST Per Amount (Rs.)

84 Self Ex Providing & fixing wooden notice board with Righting

pl.113 laminated board finish using 12mm th.Back commercial

plywood approved make, 01mm th. SF finish

laminate,teakwood framing & necessary hardware materials

etc. inside and liping french polish finish complete in all

respects by engineer in charge complete.

85 57 Providing & fixing M.S.Grills of required pattern to wooden

frames of windows etc. At all floor levels with M.S. flats at

required spacing & frame around square or round bars with

round headed bolts & round headed bolts and nuts or by

screws incl. Priming coat of Red lead paint etc. comp. (A)

Plain grill For all Floors

86 58 Providing & fixing in position collapsible steel shutters with

vertical channels 20 x10 x 2 mm. Braced with flat iron

diagonals 20 x5mm size with top & bottom rails of T-iron

40x40x6mm. with 38mm dia. steel pulleys comp. with bolts,

locking arrangements, stoppers, handles incl. applying a

priming coat of Redlead paint etc. comp.

87 color 8 Painting two coat (excluding priming coat) on new steel and

other metal surfacewith synthetic enemal paint, burshing to

give an even shade including cleaning thesurface of all dirt,

dust and other foreign matters.

88 59 Providing and fixing M.S. Fan clamps type 1 to 16 mm dia

M.S. bar bent toshpe with hooked ends to RCC slabs curing,

layig including painting the exposed portion of loops, all as per

standard design complete

89 color 1 White Washing with lime on wall surface to give an even

shade & surface incl. throughlybrooming the surface to remove

dirt, dust mortar drops & losse scales of lime wash & other

foreign matter Two coats.

(A) For wall & similar surfaces 50.00 12.41 S.M.

(B) For ceilings and soffits 20.00 13.53 S.M.

90 color3 Distempering two coats with oil bound washable distemper of

approved brand & manufacture & of required shade on wall

surface to give an even shade over and & incl. a priming coat

of alkali resistance primer of approved brand after throughly

brushing the surface to give an even shade after throughly

brushing the surface free from mortar droppings and other

foreign matter and also including preparing the surface even

(A) For wall & similar surfaces 50.00 72.33 S.M.

(B) For ceilings and soffits 50.00 80.35 S.M.

Apply two coats of putty and two coats of primer of approved

brand and manufacture on new wall surface to give an even 80.00 40.59 S.M.

shade including thoroughly brushing the surface

92 color 6 Distempering two coats on previously distempering wall

(without primer) with oil bound washable distemper of

approved brand & required shade on wall surface to give an

even shade after throughly brushing the surfaces clean of all

grease, dirt loose places of sceles & also including preparing

the surface even and smooth.

93 color 5 Wall painting (two coats) with plastic emulsion paint of

approved brand andmanufacture on undecorated wall surface to

give an even shade including throughly brushing the surface 50.00 79.39 S.M.

free from mortar droppings and other foreign matter and sand

papered smooth.

94 color 8 Painting two coat (excluding priming coat) on new steel

and other metal surface with synthetic enemal paint, burshing

to give an even shade including cleaning the surface of all dirt,

dust and other foreign matters.

Painting two coats of enamel paint ( Excluding priming

coat) over previously painted wall with even shade & surface 20.00 60.00 S.M.

after removing dirt, dust foreign matter etc. comp.(M.R.)

DTS No. Item Qty. (Without GST Per Amount (Rs.)

96 color 15 Painting two coats of enamel paint over priming coat

(including priming coat) onwall after removing entire surface

dirt, dust foreign matter & also incl. preparing the surface even

& sand papered smooth etc. comp.(M.R.)

97 color 17 Providing & applying two coats of weather shield max paint

(3 coats may be required in case of darker colours.)of ICI

Dulux or Apex Ultima of Asian Paint including applying

exterior acrylic primer coat as per manufacturers specification

and directions in shade and colour approved by architects, on

exterior surfaces of the building including scaffolding,

preparing the surface, watering, curing etc. complete and as

directed by the architects and manufacturers.

Surface Preparation :

surface is thoroughly clean, dry and free from all loose dirt,

chalk, grease, fungi, algae and flaking paint. This can be

achieved by brushing with a wire/ stiff coir brush, followed by 120.00 82.00 S.M.

water jetting if required. Fill up all minor cracks and defects

with white cement and sand mixture in the ratio 1:3. For

application on previously painted wall, previous coatings of

paint must be thoroughly scraped off and Clean the surface

thoroughly using wire brushes.

Apply a liberal coat of exterior acrylic primer and allow it to

dry for 4-5 hours. Application of putty is not recommended.

Minimum 4-6 hours duration is required between each coat of

weather shield max paint

98 65 Providing & fixing at all floor levels,both face polished

machine cut edge green kota stone slab (30mm) for urinal

partition joined with grey cement slurry (1:1) incl. Rubbing &

polishing etc. complete. (M.R.)

99 66 Providing & fixing at all floor levels,both face polished

machine cut edgeMarble slab for urinal partition joined with

grey/White cement slurry (1:1)incl. Rubbing & polishing etc. 5.00 1,050.00 S.M.

complete. (M.R.)( Basic Cost- Rs. 450/S.M.)

Providing & laying cement concrete 1:2:4 (1 cement:2 sand:4

graded stone agg. 20 mm nominal size)& curing comp.

Includ.cost of form work but exclu. Cost of reinforcement for 5.00 3,637.34 C.M.

reinforced concrete work in : (A) Foundation, footing, Base

of columns and Mass concrete.

101 MISC 96 Providing & laying ordinary cement con.1:2:4

(1cement:2sand:4graded graded stone agg. 20 mm nominal

size) finishing smooth curing etc. comp. Incld. Cost of form

work but excl. Cost of reinforcement for R.C.C. Work in : Up

(1)Having c/s area up to 0.08 sq.mt 2.00 12,123.79 C.M.

(2) Having c/s area more than 0.08 sq. mt. & upto 0.12 sq.mt 2.00 10,658.16 C.M.

(3) Having cross sectional area more than 0.12 sq. mt. 1.00 8,692.87 C.M.

(1)Having c/s area up to 0.08 sq.mt 2.00 8,593.80 C.M.

(2) Having c/s area more than 0.08 sq. mt. & upto 0.12 sq.mt 2.00 7,665.60 C.M.

(3) Having cross sectional area more than 0.12 sq. mt. 1.00 6,578.07 C.M.

102 MISC 97 Providing & laying C.C 1:3:6 (1cement :3 coarse sand :6

crushed stone agg. 20 m.m Nominal size)& curing comp. incl. 5.00 3,982.62 C.M.

cost of from work in: wall caps/ copings.

Box Cutting the road surface to proper slope and camber for

making base includinng removing the excavated stuff and 5.00 104.20 C.M.

depositing on the road side slope as directed up to 50 mt. lead.

104 GRND Preparation of subgrade with Compacting, Levelling and

DEV N 2 consolidation of subgrade with miniroller /plate vibrator

machine including watering and filling in depressions which

occur during the process as directed by engineer in charge.

105 GRND Providing & filling with Mix soil in layers of 20 cm. Th'. Incl.

DEV N 3 watering, ramming & consolidation etc. complete.

DTS No. Item Qty. (Without GST Per Amount (Rs.)

106 Self.Expl. Providing, Supplying & Sprading of Gravel in Play area

including dressing etc. comp.

107 GRND Supplying & filling fine sand(pana) in 75 mm / 100 mm /

DEV N 4 mm compacted thickness over the base including necessary

compaction, watering etc. complete. Item includes leveling by 20.00 413.09 C.M.

using vibratory plates compacted machine and as directed by

engineer in charge.

108 Removing & resetting existing readymade c.c. kerb stone of

required size & thickness in line .level and in truly vertical

position including filling joints in C.M. 1:1 (1 part of cement :

1 part of stone dust) smooth pointing in C.M. 1:1 (1 part of

cement : 1 part of coarse sand) including watering etc.

complete and as directed by engineer in charge. (M.R)

109 Removing and Resetting of Paver block of walk-way with

necessary sand / pana filling and make in line and level with 100.00 91.53 S.M.

necessary vibrating using compactor machine.

110 Self.Expl. Removing and Resetting of Kota Stone paving for footpath in

line , level and in proper gradient including 25mm thick

bedding in C.M. 1:6 (1 cement:6 sand ) with sufficient

ramming consolidation. Providing Joints in 1:3 (1 cement:3 70.00 90.68 S.M.

sand ) and smooth pointing in C.M 1:1 (1 cement:1 sand )

including watering etc, complit and as diracted by Engineer in

111 49 Providing and laying rough chiseled dressed stone flooring

over 20mm thick base of cement mortar 1:5 (1 cement :

coarse sand) or L.M. 1:1.5 including pointing with cement 0.00 549.47 S.M. -

mortar 1:2 (1 cement : 2 stone dust) etc.

Providing 100mm thick readymade C.C. kerb of strength M-

20 (size 300mm x 380mm) purchased from SMC's approved

paverblock manufacturer & setting in line, level and in truly

vertical position, including filling joints in C.M. 1:1 (1 part of 50.00 228.00 R.M.

cement : 1 part of stone dust) smooth pointing in C.M. 1:1 (1

part of cement : 1 part of coarse sand) including watering etc.

complete and as directed by engineer in charge.

For rounding at the edge of footpath (For fanning portion) 10.00 274.00 R.M.

113 GRND Providing interlocking type Rubber moulded cement

DEV N 7 concrete paver block of approved shape, design & colour

having 60mm thickness (M-35) purchased from SMC's

approved paverblock manufacturer only & fixing of fine sand

bedding. Item includes levelling by using vibratory plates

compacted machine. Item also includes all materials, labour,

equipments, tools, plants, watering, cleaning etc. complete.

With colour 50.00 524.00 S.M.

Without colour 50.00 524.00 S.M.

114 GRND Providing & fixing interlocking type Cement Concrete paver

DEV N 8 block of approved shape & design having 60 mm thickness (M-

40) purchased from SMC's approved paverblock manufacturer

only on fine sand bedding. Item includes leveling by using 100.00 553.00 S.M.

vibratory plates compacted machine. Item also includes all

materials, Labour, euipments, tools, plants, watering, cleaning

For Road Junction 80 mm thick ( M-50) 100.00 714.00 S.M.

115 GRND Providing & laying Granular sub base (GSB)confirming to

DEV N 9 Grading-V of Table 400.0 of compacted thick of 150mm with

specified graded stone metal and sand mixed in place and laid

with mechanical means spreading with motor grader and

compacting with vibratory roller having minimum 80-100 KN

static weight to acheve desired density of 98% of MDD

including all material, labour, machinery with all leads and lift

116 GRND Providing & laying cement concrete Pavement using 1:1.5:3

DEV N 10 (1 cement:1.5 sand:3 graded stone agg. 20 mm nominal size)

& Vaccuum Dewatering technique including floating surface

with a skim powder floater, curing etc. complete.

DTS No. Item Qty. (Without GST Per Amount (Rs.)

117 GRND Providing & laying cement concrete Pavement using 1:2:4 (1

DEV N 11 cement:2 sand:4 graded stone agg. 20 mm nominal size) &

Vaccuum Dewatering technique including floating surface

with a skim powder floater, curing etc. complete.

118 GRND Providing and laying 200 micron plastic sheet on prepared

DEV N 12 sub base For V.D.S Concrete

119 98 Steel work welded in built up sections, framed work including

cutting, hoisting, fixing in position and applying a priming coat

of red lead paint

(A) in beams & joists channels angles, tees, flats with

connection plates or angle cleats as in main & cross beams,hip 1500.00 90.47 Kg.

& trussed purlins connected to common raffers & the like.

(B)For work like chain link fencing, above compound wall etc. 20.00 90.47 Kg.

(C)in trusses & trussed purlins upto 25m.Span &15m.Overall

Providing and fixing G.I. chain link of 50mm x 50mm size x

10 guage thick with nuts, bolts, washer or G.I. pins, excluding

M.S. angles etc.complete as per relevent IS specification &

directed by engineer in charge. (TATA or Jindal Make)

121 100 Providing and fixing and fitting TATA or Jindal make G.I.

barbed wire fencing with necessary barbed wire (12 x

guage, weight not less than 0.14 kg. / mt.) pins, hooks, 200.00 125.00 Kg.

excluding M.S. angles etc. complete as per relevent IS

specification.& directed by engineer in charge

122 Providing and Fixing hot dip concertina coil of 610 mm dia.

made out of 2.59 mm (12 SWG) hot dip galvanized (G.I.

coating not less than 200 gm/sqmt.) th. wire having 80 nos. of

spikes and 200 nos. of clips made out of stainless steel (AISI

R&B SOR 304) 1.5 mm th. dia., G.I. strips 0.5 mm th. ( G.I. coating not

22001 less than 120 gm/sq.mt.) weight of one coil should not be lesss

than 15 kg. etc., complete at the top of compound wall fixed

with S.S. clips and binding wires whereever necessary etc.

complete. ( NOTE: Strctching length of one coil should not

be more than 9 mt.)

Providing and fixing 1.20 Metre high fencing with 2.0 Metre

long M.S. Angle posts 40mm x 40 mm x6 mm and oil

painting 3 coats fixed at 2.5 Mt,C/c. with five Horizontan lines

and two diagonals of galvanised steel barbed wire weighting 50.00 342.54 R.M.

9.38 Kg. per 100 Metre, strained and fixed to posts

with G.I,staples including fixing the postsin ground with

M x 0.5.M x 0.5 M. block in C.C1:5:10 etc complete.

124 Self.Expl. Providing and fixing 20 mm x 20mm x 10 gauge thick (using

TATA make G.I.wire) galvanise ironwire mesh (G.I. Crimped 5.00 500.00 R.M.

net) including cutting fixing etc.complete.

125 103 Providing corrugated G.I. Sheets of class-3 roofing fixed with

glavanished ironJ or L Hooks, Bolts and nuts 8m diameter with

bitumen and G.I. limpet washeror G.I. limpet washer. filled

with white lead complete excluding the cost ofpurlins, Rafters

and Trusses. (1) 0.63 mm thick sheet. (Tata / Jindal

(ii) 0.63mm Thick Sheet 20.00 1,016.00 S.M.

Providing & fixing colouron galvaniced steel, zinc /

aluminium allus coated sheet 0.5 mm. thick roofing fixed

with gslvanised grom J or L hook bolts and bolt 8mm dia with 25.00 999.00 S.M.

bituman and impet washer filled with white lead etc. Excluding

the cost of purlins rafter and trusses.(TATA or Jindal Make)

Providing & fixing 150mm wide 450mm over all

semicircular plain G.I. sheet class-3 gutter with iron brackets

40mm x 3mm size bolts, nuts, washers etc. including marking 10.00 412.00 R.M.

necessary connection with rain water pipes.

(i) 0.63mm thick

DTS No. Item Qty. (Without GST Per Amount (Rs.)

Providing ridges or hips 600mm over all in plain G.I. sheet

fixed with G.I. "J" of "L" hooks bolts and nuts 8mm dia G.I. 10.00 641.94 R.M.

limpet and bitumen washer complete (1) 0.80mm thick sheet

Providing & Fixing UV stabilise FRP Sheet roofing with

overlapping the main cladding on both edges. All fixing holes

must be predrilled oversize as specified for the sheet length and

fastener being used. Fasteners must be fitted with approved

washers. Fixings should be tightened to ensure a weatherproof

seal but they must not be over tightened Side-lap fasteners must

also be installed at specified centers with the FRP sheet having

clearance holes provided as per the main fasteners

Weatherproofing shall be provided at all flashing points under

the normal flashing by the fitting of a foam closure strip to

match the profile being used. Closure strips will be sealed to

the sheet with an appropriate non setting silicone sealant.

Excluding the cost of purlins rafter and trusses.

(a) 1.5 mm thick 5.00 992.00 S.M.

Providing & Fixing Polycarbonate sheet roofing with

surface of the sheet is coated with an anti-UV Co-extrusion

layer having good weather resistance, it can maintain its optical

properties and mechanical performance for a long time. Fasting

is usually done by screws. , The fastening screws should be

inserted about 500 mm apart and 300mm apart Along the

supporting internal purlin and edge pulin.All fixing holes with

diameter at least 2 mm larger than screw must be predrilled

into each screw location. The screws should be 6mm diameter

with length according to sheet thickness and corrosion resistant,

with at least heavy duty hot dripped galvanized or stainless

steel. Excluding the cost of purlins rafter and trusses.

(a) 1.5 mm thick Solid Sheet 5.00 1,261.00 S.M.

(b) 2 mm thick Solid Sheet 5.00 1,510.00 S.M.

Pro.& fixing corrugated ACRYLIC COLOURED - 1.m mm

roofing fixed with galvanized from 'J' or 'L' hook bolts & bolt

mm dia with bitumen and Limpet washer filled with white

\lead etc. comp. excluding the cost of purlins rafter & trusses

132 MISC Providing and fixing rolling shutters of approved make made

ITM128 of 80 mm wideM.S. laths inter locked together through their

entire lenght and jointed together

at the ends by end locks mounted on specially designedpipe

shaft withbracket plates, guide channels and arrangements for

inside and outsidelocking with push-pull operation including

the cost of hood cover and spring etc. complete

(A) Shutters having width below 3.5m 4.00 3,503.41 S.M.

133 MISC Providing & Fixing 80 mm dia M.S. pipe as vertical post are

ITM110 beded in 1:1.5:3 concrete also horizontaly in line and

connecting to purline angle etc by welding rereting etc. (a)

Medium duty "B" Class

134 MISC Providing & Fixing 50 mm dia M.S. pipe as vertical post are

ITM111 beded in 1:1.5:3 concrete also horizontaly in line and

connecting to purline angle etc by welding rereting etc. (a)

Medium duty "B" Class

135 MISC Providing & fixing black board on walls of 1.8mt.x1.2mtsize

ITM112 made up to 12 mmth.B.W.P .Plywood (Brand

Saras,Kitply,Uniply, Anchor, Green,Wood Stock or century)

fixed with teak wood beading of 65 mmx 50mm size, rubbing

& sanding comp., incl. applying two coats of black board paint

over a priming coat on plywood & French polishing the frame

all round etc. Comp. as per instruction of Engineer in charge

136 MISC Providing & Fixing Reading table size 8' x 4' and height 2'-

ITM115 6" with table top 18mm thick (Brand Saras,Kitply,Uniply,

Anchor, Green,Wood Stock or century) commercial plywood

with 1.0mm thick lamination sheet fitting with teakwood

moulding table top supported on 3" x 3" teakwood leg & 3" x

11/2" teakwood framing top and bottom with french polish

labour work hardware etc. as per site in charge instruction and

as per drawing.

DTS No. Item Qty. (Without GST Per Amount (Rs.)

Providing & Fixing Librarian table with 18mm thick

commercial plywood (Brand Saras,Kitply,Uniply, Anchor,

Green,Wood Stock or century) )with 1.0mm thick lamination

sheet table top supported on 2" x 2" teakwood leg & make

nos. drawers of 1' 3" width on both side with necessary french

polish hardware labour etc. as per site incharge instruction and

as per drawing ( Size 4' x 2'-6" x 2'-6", all framing other

then legs are teak wood of size 2" x 1")

138 Self.Expl. Labour work for chiesel shape(Bhala type) of grill square bar

139 Self.Expl. Providing & Fixing 8 mm dia Chain For Swing 10.00 101.69 No.

140 Self.Expl. Providing & Fixing Kada For Swing 10.00 305.08 No.

141 132 Providing and Fixing Hollow steel Sections Framed Work

including Cutting, Hoisting, Welding & Fixing in position

Purlin, Main Chord etc. as per Engineer- in-charge.TATA /

JINDAL / ASIAN Make

142 Self.Expl. Cutting out cracks of roof terrace to V- section cleaning

out, wetting , grouting with cement and sand slurry 1:3 (1- 10.00 36.85 R.M.

cement 3-sand )

143 Self.Expl. Providing & fixing Wooden file storage/divider 7.00' height

with all outer surface laminate finish using 18 mm th

vertical,horizontal and shutter , selves commercial plywood

approved make, 01 mm th SF finish laminates,teakwood 5.00 344.92 Sq.ft.

liping,brass hinges, ss handle lock,megnate & necessary

hardware materials etc.inside and liping franch polish finish

complete in all respects by Engineer in charge

144 Self.Expl. Providing & fixing hard drawn wire fabrics 75 mm x 25 mm

MESH of weight not less than 7.75 kg/s.m to

windows/ventilators frames etc. at all floor levels including

mm x 20 mm bidding of teakwood incuding providing and

fixing salwood frames 7 cm x 7 cm size for ventilators etc

For Ventilators all floor. 5.00 1,137.29 S.M.

145 S.O.R. Reha- Providing and applying cement mortar (1:3) modified by using

02 polymer and expanding grout additives at 25mm thickness for

repair/strengthening of various RCC elements at all floor

levels, lead, lift, including breaking, chipping, dismentling

existing cover concrete and exposing existing reinforcement,

applying wirebrush for making surfaces of steel and concrete

free from rust and other loose materials, applying rust 100.00 1,208.00 S.M.

removing chemical on existing reinforcement, applying anti-

corrosive coating on existing reinforcement, applying polymer

bonding agent on existing concrete surfaces before applying

polymer modified mortar in specified thickness as directed by

the Engineer-in-charge.

146 Self.Expl. Crack Repairs:-Crack filling using fiber reinforced polymer

modified mortar after openning crack in "V" grove, Making

Surface dust free, with a bond coat of polymer as per the data

sheet for crack repairing cracks less than 8mm

Providing and fixing rebar of following diameter using

chemical grout of Swanchore/Hilti/Fischer or equivalent make

including cost of allequipments, tools, material, labour, etc.

Standard procedure asmentioned in manufacturer's

specifications shall be strictly followed, which shall be

submitted and got approved from the authority prior to start of

work. The rate shall also include cost of drilling of hole of

required diameter and depth as mentioned in manufacturer's

specification,cleaning the hole with required air blower and

other necessary tools and tackles, positioning, providing and

grouting chemical, allied fixtures and fasteners, etc. but

excluding the cost of reinforcing bar etc. complete. Item

includes necessary scaffolding, staging, labour, tools and

equipments,etc. complete as directed by the engineer-in-charge.

DTS No. Item Qty. (Without GST Per Amount (Rs.)

Providing and Fixing Stainless Steel (Grade 304) Railing made

of Hollow tubes, channels, plates etc. Including Welding,

Grinding, Buffing, Polishing and Making Curvature (Wherever

Required) and fitting the same with necessary Stainless Steel

Nuts and Bolts Complete, i/c fixing the Railing with Necessary

Accessories & Stainless Steel Dash Fastenders, Stainless Steel 10.00 450.00 Kg.

Bolts etc. of Required size, on the top of the floor or the side of

waist slab with suitable arrangement as per aprproval of

Engineer-incharge, (for payment purpose only weight of

stainless steel members shall be considered excluding fixing

accessories such as nuts, bolts, fasteners etc.)

WATER SUPPLY & SANITARY ITEMS

149 SANITARY Prov.& Fixing water closet squatting pan (Orissa type

13 W.C.pan) at all floor levels, size 580mm incl. 100 mm size

"P'or "S" trap for water closet squatting pan joining the trap

with the pan & soil pipe in C.M. 1:1 (1cement :1 fine sand)

etc. Comp.(A) Vitreous china long pattern of approved colour

Make- Cera S3010109, Parry ware C0117CS/C0117*

Jaquar,HindWare

150 SANITARY Providing and fixing Wash Down Water closet European

6 type W.C. pan with integral P or S trap with normal closing

seat cover L bend including jointing the trap with soil pipe in

cement mortar 1:1 (1 cement : 1 find sand) (A) Viterous china

Make- Cera CONVENTIONAL B1510121 , Parry ware

C0297*/ C0278,HindWare sleek 20011, Jaquar- CNS-WHT- 5.00 3,282.00 No.

151 WTR Providing and fixing plastic seat and cover for wash down

SANTRY water closet with C.P. brass hinges and rubber buffers (B) 10.00 291.33 No.

69 Black plastic seat and cover.

152 SANITARY Providing & fixing white viterious china Urinal of size 450 x

8 325 mm as per IS-2556 (Part-2) with C.I. Hangers and 15mm

dia. C.P. Spreader, 32mm dia CP bottle trap and pipe to wall

with C.P. Flange complete including cutting and making good

the walls and floors wherever required.

Make- CeraCat. No. S4020103, Parry ware C0501*, Jaquar

URS-WHT-13261H ,HindWare BACK SMALL

153 SANITARY Providing & fixing wash Hung basin with single hole for

7 pillar tap, Size 550x400mm at all floor levels, with C.I. or

M.S. Brackets painted white incl. cutting holes & making good

the same etc. complete. For all Floor

Make- Cera Cat. No. S2040121, Parry wareC0434* (CTH),

Jaquar SLS- WHT -6801 ,HindWare10004

154 WTR Providing & fixing 600 mm.x 450 mm. mirror of superior

SANTRY glass at all floor levels, mounted on 6 mm. th. A.C. sheet or

72 plywood sheet & fixed to wooden plugs with C.P.brass screws

and washers etc. For all Floor

155 SANITARY Provinding and fixing Towel Ring fabricated from seamless

10 stainless steel tube 2mm thick in Bath room with polished wall

flange at end of bars with heavy duty anchor fasteners &

Make- Cera F5014115CH, Parry ware F5014115CH, Jaqua

ACN-1121N ,HindWare F880007

156 SANITARY Providing & fixing S.S. Towel Rail of 600mm Long

11 approved make including, provinding & fixing C.P. Brass

screws, making holes in wall & making good.

Make- Cera F5015103CH, Parry ware F880005T, Jaquar

1111BSM,HindWare F880005T

157 SANITARY Providing & fixing stainless steel recessed type Soap Dish of

12 approved make. Including providing & fixing screws, washers,

cutting & making good the walls.

Make- Cera F5007106, Parry ware T6902A1, Jaquar ACN-

1131N,HindWare F880011

DTS No. Item Qty. (Without GST Per Amount (Rs.)

158 SANITARY Providing & fixing Health Faucet ABS Body with wall Hook

14 & 1 Meter Chrome plated PVC Hose Pipe.

Make- Cera F8030106AB, Parry ware T9874A1, Jaquar ALD-

587,HindWare F160109

159 WTR Prov. & Fixing S.W. Gully trap with C.I.grating brick

SANTRY masonary (C.M 1:5)chamber & water tight C.I. cover with

73 frame of 300mmx300mm size (inside) with weight includ.

plastering smooth inside & outside 15mm. th' in C.M.1:3 etc.

comp. (i) Square mouth traps---

(A) 100mm x 100mm Size -P type 10.00 1,292.19 No.

(B) 150mm x 100mm Size- P Type 0.00 1,246.92 No. -

160 WTR Prov. & Fixing S.W. Gully trap with C.I.grating brick

SANTRY masonary (C.M 1:5)chamber & water tight Pre cast R.C.C.

74 cover of 300mmx300mm size (inside) includ. plastering

smooth inside & outside 15mm. th' in C.M.1:3 etc. comp. (i)

Square mouth traps---

(A) 300mm x 300mm Size -P type 10.00 1,098.48 No.

(B) 150mm x 100mm Size- P Type 0.00 1,053.20 No. -

161 WTR Prov. & Fix. 10 cm.x15 cm.(4" x 6") S.W. trap with Inside

SANTRY dimension ,455 x 610 mm & 450 mm deep sewer trap

75 chamber with 23 cm th' B.B. masonary walls in C.M 1:5 with

cement plaster 15 mm th' in C.M. 1:3 inside & outside to

exposed faces, R.C.C. top slab with 1:2:4 mix ( 1 cement:

Sand : 4 Grade stone aggregate 20mm size) ,Foundation

concrete 1:5:10 & fixing C.I. cover with frame to be not less

than 38 kg. On top etc. comp. for single pipe.

(A)Same as above but Precast RCC heavy duty Cover instead

Extra for every additional depth of 0.1 mt beyoung 0.45 mt 5.00 222.71 Each

Providing & construction simple chamber of 23 cm. th' B.B.

Masonary in C.M 1:5 with cement plaster 15 mm th' in C.M.

1:3 inside & outside to exposed faces, R.C.C. top slab with

1:2:4 mix ( 1 cement: 2 Sand : 4 Grade stone aggregate 20mm 10.00 2,932.93 No.

size) ,Foundation concrete 1:5:10 & fixing C.I. cover with

frame to be not less than 38 kg. On top etc. comp. Inside

dimension,455 x 610 mm &450 mm deep for single pipe

(A) Same as above but Precast RCC heavy duty Cover instead

Extra for every additional depth of 0.1 mt beyoung 0.45 mt 10.00 242.39 Each

163 WTR Providing, Lowering & laying joining R.C.C. NP2 CLASS

SANTRY Pipe In C.M. 1:1 of following nominal internal diameters incl.

77 Testing of pipes and joints etc. Comp

164 WTR Providing & laying in trenches galvanised mild steel

SANTRY tubes(medium grade) TATA / ZENITH / ASIAN / JINDAL

78 MAKE of the following nominal bore & tube fittings etc.

165 WTR Providing & Fixing to wall, ceiling floor at all floor levels,

SANTRY galvanised mild steel tubes(medium grade) TATA /

79 ZENITH / ASIAN / JINDAL MAKE of the following nominal

bore, tube, fittings & clamps incl. making good the wall ceiling

and floor etc. complete.

166 SANITARY Providing and fixing 15mm Dia bib tap with wall Flange at all

2 floor levels,polished bright etc. Comp.

Make- Cera F2013151 BIB COCK, Parry wareG3104A1,

HindWare F280002 BIB COCK, Jaquar FLR-5047 N BIB 30.00 1,323.00 No.

DTS No. Item Qty. (Without GST Per Amount (Rs.)

Providing & Fixing gun metal check or non return full way

wheel valve at all floors levels, etc. complete.

SANTRY (B) 25 mm. dia. 25.00 420.63 No.

168 Self.Expl. Providing and fixing Screw down stop taps (a) 15 mm. dia. 50.00 204.57 No.

169 SANITARY Providing Metropole Flush Valve Dual Flow 40mm Size

18 (Concealed Body)

Make- Cera F8010202 , Parry ware T3302A1 , Jaquar FLV-

1089NSQ ,HindWare F860075

Providing & Fixing C.P. Brass screw down bib tap at all floor

SANTRY 50.00 186.83 No.

levels, polished bright etc. comp.-(A) 15mm dia. For all Floors

171 SANITARY Providing Flush Cock consisting lever, cartridge sleeve &

4 flange & concealed part

Make- Cera EXPOSED PART F2013751 &Concealed part

F4060101 , Parry ware T9824A1&T9823A1, Jaquar FLR

5083 KN , CONCEALED BODY ALD-081,HindWare 20.00 2,110.00 No.

F280052 & CONCEALED STOP COCK F850105

172 SANITARY Providing & fixing 15mm C.P. Brass angle valve (stop cock)

5 with C.P. Copper connecting pipe 450mm long and nuts,

washer and brass flange complete, including cutting and

making good the wall where required.

Make- Cera F1020362, Parry ware T0712A1, HindWare Cat.

Make- jaquar CON 053 KN 10.00 1,432.00 No.

173 SANITARY Providing and fixing C.P. Brass pillar cock with copper

1 connection ,C.P. Brass screws complete

Make- Cera F2013101, Parry ware Cat. No.: G3102A1,

HindWare Cat.No.: F650003, Jaquar FLR-5011N

174 Self.Expl. Providing and fixing waste Pipe for Washbasin or sink (A )

175 Self.Expl. Providing and fixing Supply Pipe for Washbasin or sink 20.00 67.80 No.

176 Self.Expl. Providing and fixing Jet Sprey Cock at all floor level etc.

177 Self.Expl. Providing and fixing

(A) 40 mm thick RCC cover for simple chamber,s.w.trap &

(B) PVC water tank cover upto 2000 Lit. 15.00 169.49 No.

178 Self.Expl. Supplying and fixing C.I. cover 300 mm X 300mm. without

frame for gully trap (standard pattern) the weight of cover to be 15.00 559.32 No.

not less than 4.53 Kg.

Providing and fixing C.I. Manhole cover 0.60 x 0.45 mt. Size

SANTRY 15.00 958.17 No.

having weight not less than 35 Kg. etc. complete.

180 WTR Providing & Fixing U-PVC pipe (SWR) confirming to IS no.

SANTRY 13592 (Type "B") of Prince/Supreme/Jain/Astral/Tulsi make

84 for soil and waste discharge system at all floor levels incl. All

fixtures like bends, tees, shoe etc. jointed with resin of

approved brand & manufacture etc. comp. (M.R.)

181 WTR Providing & fixing U-PVC pipes Confirming to IS no.

SANTRY (Type "A") of Prince/Supreme/Jain/Astral/ Tulsi /finolex

85 make for rain water at all floor levels incl. fixtures like bends,

tees, shoe etc joined with resin of approved brand &

manufacture etc. comp. (M.R.) .

DTS No. Item Qty. (Without GST Per Amount (Rs.)

182 WTR Providing, Laying and jointing on true line and level UPVC

SANTRY pipe (SCH-40) line of Prince/Supreme/Jain/Astral/

86 Tulsi/Finolex make including fittings make or equivalent as

approved by angineer-in-charge. Pipe shall be fixed on the wall

the help of clamp at every two meter C/C or shall be concealed

as directed including necessary fittings etc. including testing of

pipe and joints and fixing the same with adhesive solvent,

including cost of all materials.

Providing & Fixing P.V.C. pipes (SCH-80) of Prince/

Supreme/ Jain/ Astral/ Tulsi/Finolex make for water supply

line at all floor levels incl. fixtures like bends, tees, shoe etc

joined with resin of approved brand & manufacture etc. comp.

Pipe shall be fixed on the wall the help of clamp at every two

meter C/C or shall be concealed as directed including necessary

fittings etc. including testing of pipe and joints and fixing the

same with adhesive solvent, including cost of all materials.

184 WTR Providing and fixing PVC SWR Nahni trap IS 14735 for drain -

SANTRY 110 x110 mm diameter with jali of the following nominal

88 diameter of self cleaning design with C.I. scread down or 10.00 558.36 No.

hinged grating including the cost of cutting and making good

185 Self.Expl. Providing and fixing 100x 100 mm Size P.V.C /C.I Greting

(Jali ) for Nani Trap.

186 WTR Providing & Fixing in position PVC Cowl vent to pipes of

SANTRY Prince/Supreme/Jain/Astral/Tulsi/Finolex make etc.Comp.

187 WTR Providing & fixing M.S. Holder Bat clamps at all floor levels

SANTRY of approved design to C.I. Or S.C.I pipes including the cost of

90 cutting holes & making good the wall etc. Complete -

mm. dia. (M.R.)

188 WTR Providing & fixing G.I./Aluminum Patti clamps at all floor

SANTRY levels of approved design to C.I. Or S.C.I pipes including the

91 cost of cutting holes & making good the wall etc. Complete -

100 mm. dia. (M.R.)

189 WTR Providing & Fixing Kathi around the vertical PVC drainage

SANTRY pipes for concealing with cement plaster 20 mm avg

93 thickness(CM 1:3 [1 cement :3 coarse sand]) finishing as per

instruction given by Eng. incharge. for

(A) 75 mm PVC PIPE 10.00 173.00 R.M.

(B) 100 mm /110 mm PVC PIPE 10.00 180.00 R.M.

190 WTR Providing erecting and fixing double coated

SANTRY Syntex/Super/Reno PVC (ISI) mark water tank of required

92 capacity each with all necessary fittings & connection etc.

complete on terrace.

191 Providing & construction Septic tank as per the drawing clear

size 4.0 mt.x 1.40mt.x1.60 mt. incl. Necessary excavation &

refilling & disposing the surplus excavated earth within 50 mt.

lead incl. bedding of 25cm th' brick masonary in C.M.1:6 &

partition wall in C.M. 1:4 incl. 10mm th' cement plaster in

C.M.1:4 to brick wall & 15 cm. th'. R.C.C slab on the top 0.00 29,981.59 No. -

using 1:2:4 C.C excluding reinforcement as per the structural

design with fixing C.I cover of 0.60mt.x 0.45mt.size & wt. Not

less than 35 Kg. & providing necessary fittings as per drawing

or as directed by Engineer in charge etc. comp. ( Steel-

DTS No. Item Qty. (Without GST Per Amount (Rs.)

192 Providing & construction Septic tank as per the drawing clear

size 8.0 mt.x 2.6mt.x1.34 mt. incl. Necessary excavation &

refilling & disposing the surplus excavated earth within 50 mt.

lead incl. bedding of 25cm th' brick masonary in C.M.1:6 &

partition wall in C.M. 1:4 incl. 10mm th' cement plaster in

C.M.1:4 to brick wall & 15 cm. th'. R.C.C slab on the top 0.00 85,220.55 No. -

using 1:2:4 C.C excluding reinforcement as per the structural

design with fixing C.I cover of 0.60mt.x 0.45mt.size & wt. Not

less than 35 Kg. & providing necessary fittings as per drawing

or as directed by Engineer in charge etc. comp.. ( Steel-

193 Providing & constructing soak pit as per drawing clear size

mt. dia. & 6mt.depth with necessary

excavation,refilling&disposing of surplus excavated earth

within 50 mt. lead, constructing 23 cm th.masonary in C.M.

1:6 for 3.0mt below G.L, incl.10 cm th. R.C.C slab on top 0.00 18,290.42 No. -

using C.C. 1:2:4 excluding the reinf. As per the structural

design with fixing C.I. cover 0.6mt. x 0.45mt.size weight not

less than 35 Kg. & pro. Necessary filling as per drawing or as

directed by Engineer-in-charge etc. ( Steel- 31.5 Kg.)

Providing & laying ordinary C.C.1:1.5:3 mix for R.C.C. work

incl. boxing, centering, vibrating, curing & mixed with

approved water proofing cement compound or

"CEMWET"or"PIDICRETE LW"integral water proofing

admixture as water proofing agent to be mixed with 50 kg.

cement bag shall be as recommended by the manufacture of the

water proofing material, concrete work for top, bottom slab &

side pardi for Under ground Tank & Item incl. Necessary

excavation & refilling the available earth, 15 cm th' C.C 1:4:8

for bedding concrete, Half B.M. in C.M. 1:4 outside wall,

inside R.C.C. pardi as per design, 10mm.th. water proofing

cement plaster in C.M. 1:3 with smooth finishing,watering

etc.Comp.to all inner face & bottom of tank curing etc. comp.

incl. Locking arrangement, outlet, inlet, overflow & wash out

pipe arrangement as necessary & C.I. Cover 0.60 x .045 weight

not less then 35kg. etc. com. as per structural drawing

excluding Steel & as directed by Engineer-in-charge

Underground tank 0.00 5.46 Lit. -

195 Providing & Laying Commercial Quality white glazed tiles

6mm. th. in flooring laid on a bed of 20 mm. Av.

Th.C.M.1:3(1cement :3 sand ) & on wall Of R.C.C. Tank

with necessary cement paste for fixing and joined with white

cement slurry etc. complete. finished with flush pointing in

white cement etc.com.

196 61 Providing and filling in depressions of Bath and W.C. At all

floor levels, after completing plumbing work of pans,

pipes,traps etc.with cinder or fly ash as directed by Engineer

in charge etc. comp..

197 62 NOTE :- (1) The whole work is to be executed through

specialized agency with a guarantee of 10 (Ten) years given on

a prescribed proforma duly stamped (2) The rate shall include

for work at all floors & conducting water proof test as directed.

(A) Providing and laying water proofing treatment to vertical

and horizontal surfaces of depressed portions of W.C.,kitchen

and the like consisting of :

(a) I course of applying cement slurry @ 4.4 kg/sqm mixed

with water proofing compound conforming to IS : 2645 in

recommended proportions.

(b) II course of a layer of plaster in C.M. 1:3 with water

proofing compound confirming to IS:2645 about 25 mm. th' in

the floor of the depression & about 18mm th' On the side walls

of the depression up to the floor level, water proofing plaster

about 18 mm. th' be continued on the walls above the floor

level for a height of 600 mm. with surface suitable to receive

further treatment

(c) Finishing top with stone aggregate 10mm to 12mm nominal

size spreading @0.008 C.M./S.M., thoroughly embedad in

as per specifications & instructions of Engineer in charge

(Cement consumption 0.316 Bags / S.M.)

DTS No. Item Qty. (Without GST Per Amount (Rs.)

(B) Providing and laying integral cement based water

proofing treatment including preparation of surface as

required for treatment of roofs, balconies, terraces etc.

consisting of following operations.

(a) Applying and grouting a slurry coat of neat cement using

2.75 kg/sqm of cement admixed with proprietary water

proofing compound comforming to IS:2645 over the R.C.C.

slab including cleaning the surface before tratment.

(b) Laying cement concrete using broken bricks/brick bats

mm to 100 mm size with 50% of cement mortar 1:5 (1 Cement

: 5 Coarse sand) admixed with proprietary water proofing

compound conforming to IS:2645 ,brick bats is finally covered

by jointless cement plaster 20mm th. in C.M. 1:4 added with

special water proofing compound confirming to IS:2645 & top

smooth finished with trowel with false chequered marking of

300 mm.size.The treatment is carried along the vertical surface

of the parapet & other adjoining wall up to height of about

300 mm in a shape of quarter round vata Incl. curing etc.

Comp. With average thickness of 120 mm and minimum

thickness at khurra as 65 mm.

(c) The whole terrace so finished shall be flooded with water

for a minimum period of two weeks for curing and for final

test. All above operations to be down in order and as directed

and specified by the engineer-in-charge. With average

thickness of 120 mm and minimum thickness at khurra as

mm. (Cement consumption 0.511 Bags / S.M.)

Proiding & laying water proofing treatment to vertical and

horizontal surfaces like consisting of (a) I course of applying

cement slurry 4.4 kg per sq.mt. mixed with water proofing

compound confirming to IS:2645 in rcommended proportions.

(b) II corse of 20mm cement plaster 1:3 mixed with water

proofing compound in recommended proportion (c) III course

of applying blown or / resideal bitumen applied hot at 1.7 kg

per sqm of area. (d) IV course of 400mm micron th. PVC

sheet. (Overlaps at joints of PVC sheet should be 200mm wide

and pasted to each other with bitumen about 1.7 kg./ sqm.)

199 Self.Expl. Pro & Const. water Proofing Cement vata of 10 cm size in

C.M 1:1 etc complete.

200 64 Providing & fixing G.I. Rain water spout of 50 mm.dia &

Prov.& Fixing water closet squatting pan (Indian type

W.C.pan) at all floor levels, size 580mm incl. 100 mm size

"P'or "S" trap for water closet squatting pan joining the trap

with the pan & soil pipe in C.M. 1:1 (1cement :1 fine

sand) etc. Comp.(A) Vitreous china long pattern of

approved colour For all(1cement :1 fine sand) etc.

Comp.(A) Vitreous china long pattern of approved colour For

all Floor Floor

Providing and fixing Wash Down Water closet European

WTR type W.C. pan with integral P or S trap including jointing the

202 SANTRY trap with soil pipe in cement mortar 1:1 (1 cement : 1 find 10.00 1,303.71 No.

68 sand) (seat and cover to be measured and paid for separately)

(A) Viterous china pattern - I (i) in approved colour

DTS No. Item Qty. (Without GST Per Amount (Rs.)

Providing & fixing wash basin with single hole for pillar tap at

all floor levels, with C.I. or M.S. Brackets painted white incl.

cutting holes & making good the same incl. fittings such as

pillar tap, capstan head screw down high pressure with screws,

shanks & back nuts, C.P. Brass waste trap, screw down stop

tap 15 mm. dia. etc. complete. (A) Vitreous china flat back

wash basin 550 mm.x 400 mm. size in approved colour For

Providing & fixing Urinal or approved quality including

conecting the Urinal with waste pipe, tap etc. complete. (A)

White earthenware flat back or corner type size 430 mm x

Providing & Fixing chromium plated brass half turn flush cock

205 at all floor levels, of approved quality incl. fixing in pipe line 10.00 263.77 No.

etc. Comp.-- 25 mm dia.

WTR Providing & Fixing abonite ball cock of approved qualities

SNTRY 82 directed etc. comp. (A) 25 mm. dia.

207 MISC 113 Providing & fixing Green board on walls of 1.8mt.x1.2mt size

made up to 18 mm th.ply (using IS 710 Marin ply) with 1 mm

thick outside green board & 0.8mm backside white laminate &

with good Quality of adhesive with appropriate fittings of 4.00 5,195.00 No.

Alluminium fittings or teak wood bedding 65 mmx 50mm size,

rubbing & sanding comp., as per instruction of Engineer in

Providing & fixing White board on walls of 1.8mt.x1.2mt size

of 12mm thick with appropriate fittings and Alluminium 5.00 4,230.00 No.

fittings comp., as per instruction of Engineer in charge (M.R.)

209 MISC 117 Providing & Fixing simple 12mm thick commercial plywood

(Brand Saras,Kitply,Uniply, Anchor, Green,Wood Stock or

century) Rack of size 6' x4' and depth 1'-6" 5 Nos. horizontal

partition, supported 2" x 1" framing with necessary french

polish hardware labour etc. as per site

incharge instruction and as per drawing.

210 MISC 118 Providing & Fixing fitting commercial 8mm thick plywood

(Brand Saras,Kitply,Uniply, Anchor, Green,Wood Stock or

century) magazine stand of Size 6' x 4' with 3" x 11/2" vertical

supporting and adjustable lag support and horizontal simple 2" 10.00 6,745.00 No.

x 1" teakwood patti for magazine support with necessary

french polish hardware labour etc.as per site in charges

instruction and as per drawing.

Welding Charge 50.00 513.56 Rmt

212 Providing and fixing 150 mm wide, approved quality

chicken wire mesh (FRP / PVC)at junction of brick work

and RCC work or two dissimilar surfaces, at all heights

fixed by nails, rowal plugs or tag by cement mortar 1:3 before

applying the plaster, including curing, scaffolding all complete

213 Providing and filling Epoxy grout of approved or

suggested brand by consultant / Engineer in charge in 4mm to

6mm thick tiles joint including spacer with cleaning of joint by

vacuum or blower etc

214 GRND Cutting of Groove 5 to 7 mm thick in VDS for depth 1/3 of

DEVP 13 total thickness with filling of epoxy sealent as directed by 30.00 50.00 R.MT

engineer in charge

215 Self.Expl. Part -B WATER BORING

A Self.Expl. Labour charges for 6" Dia. Drilling in all Kind of soil up to

required depth with necessary gravel packing etc,all comp.

B Self.Expl. Providing & Erecting 5"inch P.V.C. plain CS pipe of standard

make (Finolex,Sumolex,Ashirwad) to be erected as casing pipe 20.00 333.56 R.M

in bore etc.comp.

DTS No. Item Qty. (Without GST Per Amount (Rs.)

C Self.Expl. Providing & Erecting 5"inch P.V.C.stainer of standard make

(Finolex,Sumolex,Ashirwad) to be erected as casing pipe in 30.00 361.36 R.M

Providing & Lowering 40" Dia, H.D.P.E. Std. pipe of standard

make (Gindal) with required fitting etc. comp. as directed

E Self.Expl. Providing & Lowering 25" Dia, G.I.Std. pipe of standard make

with required fitting etc. comp. as directed

F Self.Expl. Providing & fixing bend, Coupling, M.S. clamp, Adaptor Set

G Self.Expl. Providing & Lowering of standard make pump set with

necessary ISI cable,SD starter switch all Required, Pump set

having capacity of 106 LPM at 40 mtr. head capacity 2HP all

Total Amount Rs.

Total Amount Rs.

Executive Engineer

South Zone - A (Udhna)

Sign of Contractor Surat Municipal Corporation