KCMC- MLA scheme 2023-24

Amount

Excavation work by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift up to 1.5 m, including getting out the excavated soil and disposal of surplus excavated soils as directed, within a lead of 50 m. complete as per the direction of Engineer-in-Charge.

Supplying and filling in plinth with Msand under floors, including watering, ramming consolidating and dressing complete as per the direction of Engineer-in-Charge

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level: 1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 nominal size) complete as per the direction of Engineer-in-Charge.

Steel reinforcement for R.C.C work including straightening, cutting, bending, placing in position and binding all complete upto plinth level Hard drawn steel wire fabric complete as per the direction of Engineer-in-Charge. Steel calculate as 175 kgs per CuM of RCC concrete

Providing Centering and shuttering including strutting, etc. and removal of form for: Foundations, footings, bases of columns, etc for mass concrete) complete as per the direction of Engineer-in-Charge.

Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level: 1:1:5:3 (1 cement 1.5 coarse sand :3 graded stone aggregate 20 mm nominal size complete as per the direction of Engineer-in-Charge.

Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift up to 1.5 m.complete as per the direction of Engineer-in-Charge.

Spl Work: 9" thick brick masonry with common burnt clay (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level. Cement mortar 1:3 (1 cement : 3 coarse sand) complete as per the direction of Engineer-in-Charge.

Rough cast plaster upto 10 m height above ground level with a mixture of sand and gravel or crushed stone from 6 mm to 10 mm nominal size, dashed over and including the fresh plaster in two layers, under layer 12 mm cement plaster 1:4 ( 1 cement : 4 coarse sand) and top layer 10 mm cement plaster 1:3 ( 1 cement : 3 fine sand) mixed with 10% finely grounded hydrated lime by volume of cement . Ordinary cement finish using ordinary cement

Providing and laying of 20mm thick Polished Granite stone flooring in required design and patterns all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing , curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge.Polished Granite stone slab jet Black, Cherry Red, Elite Brown, Smoke Gry or Silver Grey, Cat Eye or equivalent.

Spl Work: Providing supplying and fixing of 12.5mm thick MS Plate for Bus shelter's columns support. Size: 300mm x 300mm x 12.5mm thick. Each coloumns should have 2nos of MS plate with necessary holes for fixing of 1" dia Bolts.as directed by the Engineer-in-Charge. 98kgs/ sqm for 12.5mm plate

pl Work: Providing supplying and fixing of L bend 1" dia GI threaded rod from foundation to column base plate. complete as per the direction of Engineer-in-Charge. Weight of 24mm GI Rod is 3Kg / Mtre

Spl Work: Providing supplying and installation of SS Bus Shelter with 304Grade Matt finish SS Pipe arrangements for SS Bus shelter. 168mm dia ss pipe to be used 2nos of columns & 1no of horizontal member, 114mm dia ss pipe 1no as horizontal, 60mm dia ss pipe for chair/bench outer members, 40x40 square tube to be used chairs inners, advertisement board outer frame and purlin members, 4mm thick ss sheet to be used for side end caps, roof rafters, purlin support, 8mm thick ss sheet to be used flange and cleats wherever required details as per the dwg, complete as per the direction of Engineer-in-Charge.

Spl Work: Providing supplying and fixing of 6mm thick polycorbonate roof top. Made of 6mm thick Polycorbonate sheet to be fixed on Purlin frame with necessry non leakage srews arrngements complete as per the direction of Engineer-In-Charge.

Spl Work: Providing supplying and fixing of SS Signage at Roof top. Made of 1mm thick SS sheet with necessary etching work of images complete as per the direction of Engineer-In-Charge.

Spl Work: Providing supplying and fixing of 12.5mm thick MS Plate for Bus shelter's columns support. Size: 300mm x 300mm x 12.5mm thick. Each coloumns should have 2nos of MS plate with necessary holes for fixing of 1" dia Bolts.as directed by the Engineer-in-Charge. 98kgs/ sqm for 12.5mm plate

Wiring for circuit/ sub main wiring along with earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed steel conduit as required 2 X 6 sq. mm + 1 X 4 sq. mm earth wire

Wiring for light point/ fan point with 2 runs x 1.5 sq.mm FRLS PVC insulated copper conductor wiring with pvc conduit and earthing the point with 1.5 sq.mm. The rate is inclusive of cost of Wire, conduit, clamps, screws, labour and transport charges.

Supplying and fixing of piano type switch / socket on the pvc switch box/ cover including connections etc. as required.5/6 amps switch and socket.

Supply of 4' LED tube light fitting. The supply of accessories like clamps, supporting brackets and hardwares with all accessories required as per site conditions. Rate is inclusive of Light fitting and installation charges.

Supply of 9W LED Spot Display light fitting. The supply of accessories like clamps, supporting brackets and hardwares with all accessories required as per site conditions. Rate is inclusive of Light fitting and installation charges.

GST Amount for providing Service to Government Contract Works for the above ConstructionWorks. GST Amount is the Total GST Amount for overall quoted amount above this row in column "BB" for all works in this package} (Refer Clause 13.2 & 13.3 of Section 2 of Instruction to Bidders (ITB) of SBD)

AKR CONSTRUCTION