Urgent mechanical repair works for restoration/relocation of horizontal pumping unit at LIS irrigation Scheme Gonipora of MISD Handwara.

Amount

Carriage, handling, loading, unloading of departmentally available old MS pipes, MS Channels etc in tata mobile load carrier across a lead of approx. 20 KM to and fro. Unloading of pipes at Gonipora site. The job includes cost of labour, tools and tackles for smooth carriage of material.

Fabrication of 10feet ×10feet MS platform for installation of pump using departmentally available material for fabrication of skeletal structure viz 150mm MS pipes, ISMC 200, ISMC 150 channels as per site requirement. Installation of pumping equipment by way of welding and modification works to base frame. Refitting of 150 MM dia MS delivery line and connecting it to rising main including fabrication of offsets, MS bends. Refitting of 200 MM dia MS suction line including fabrication of bends, tail pieces. Repairs to 200 mm dia MS footvalve by way of reconditioning of MS plates, hinges, providing, fitting of washers etc and fitting of same to suction line. The entire job includes charges on account of DG set, Welding set, Skilled welder, Tata mobile carrier, Oxy acetylene gas cutter, Manual Labour, tools and tackles and other foreseen items for successful execution of job at site which may take more than five days. The job includes cost on account of charges for hiring of boat for carrying out the work as the Platform needs to be installed near river bank edge and involves skilled and careful execution of work. The approximately oxy acetlene cutting involved= 800cm , welding involved = 1000cm , tata Mobile carrier charges (05 days), driver charges (05 days), DG set charges (05 days), Highly Skilled welder charges=(05 days), Manual labour involved 04× 05 days=20 days, Hiring of boat (02 days), fuel charges, priming of pumping unit using portable water pump for testing, and other unforeseen items. The work shall involve all necessary modifications as required during exection of job to full satisfaction of department. The job shall involves painting of pumping unit, MS platform, deliver line, suction line.The entire work required skilled craftsmanship for successful installation of horizontal pumping unit at site and testing of same on full load at site

Providing and fitting of ISMC 75 channel (105KG ), ISA 50×50×05mm (44kg), MS Chequered plate 05 mm (375 KG) having total weight of approx kg for strengthening and fabrication of MS Platform as per site requirement.

Providing, fitting, testing and commissioning of PN 1.0, 150 mm dia non rising stem CI double flanged sluice valve of zoloto/sant or equivalent make.delivery line.Furthermore nuts, bolts, rubber insertions etc are included in the job. The job also includes testing of the said sluice valve on full load.

Fabrication, providing 12 mm thick, 150 mm dia MS flanges to pipe ends by way of welding works at site

providing and fitting of 150 mm dia rubber gasket for flanged joints

Providing and fitting of MS nuts bolts of assorted sizes

Providing and laying stone soiling tightly hand packed under foundation footing etc. including ramming and dressing and carriage of material from source to site of work complete in all respect.

Providing and laying in position cement concrete of grade 1:4:8(1 cement,4 coarse sand,8 graded stone agg/40mm nominal size crushed agg).

Providing and laying in position reinforced cement concrete of grade 1:2:4 (1 cement,2 coarse sand,4 graded stone agg/20mm nominal size crushed agg).

centering and shuttering including strutting and propping for foundations, footing, basis for columns

Providing and fitting TC-16 coupling set complete for pumping unit along with flexible rubber tyre. Taking dimensions of prime mover shaft and pump shaft at site and then boring the CI coupling halves as per site requirement on lathe machine at workshop. Complete linear and angular alignment of prime mover and pump shafts for smooth operation including providing and fitting of coupling bolts. Testing pumping unit on full load at site.

M/S EURO LIGHT ENTERPRISES (BID ID -2401823)

Meer Engineers (BID ID -2401724)