Completion of incomplete work for repairs and maint of certain accn in MES Md area and GE Office and renovation of VIP ward at MH Ramgarh Cantt

Amount

SECTION-I Dismantling of AC sheet (corrugated or semi corrugated etc) including AC ridges as in roof covering complete all as specified and as directed.

S & F, 6 mm thick asbestos fibre cement corrugated sheet fixed with ‘L’ type or ‘J’ type or cranked hook bolts complete all as specified and as directed.

All as per ser Item No 02 here-in - before but except sheeting complete all as specified and as directed.

S&F, asbestos cement two piece adjustable serrated ridge 6mm thick for corrugated or semi corrugated sheet complete all as specified and as directed

S & F Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick(TCT) of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws as specified. complete all as specified and as directed.

S & F Pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50 mm thick(TCT) of any colour having tensile strength of 550 Mpa as in ridges, fixed with self tapping screws as specified complete all as specified and as directed.

Dismantling wall and ceiling board of any description complete all as specified and directed.

Dismantling of wooden scantling 40sqcm and over in section fixed in any position as in unframed work complete all as specified and as directed.

All as per Item No 8 above but in fiilet,rails, posts, rafters,purlins,etc under 4 Sqcm in section.complete all as specified and as directed.

M&L for second class hard wood in scantling clean sawn complete all as specified and directed.

M & L second class hard wood plain fillets, squrare, rectangular in section clean sawn secured with nails sectional area exc 13 but not exc 25 sq cm as in secondary joist all as specified & directed by engineer in charge.

M & L for second class hard wood plain, fillets, square, rectangular or triangular in section bull nose splayed,chamfered or rounded on one edge , secured with screw of sectional area exc. 06 Sq cm but n. exc. 13 Sq cm complete as specified and as directed.

S & F in repairs 4 mm thick non asbestos fiber cement building boards, fixed to timber framed work with screw as in ceiling complete all as specified and as directed.

M & L false ceiling of grid system (size 605mmx 605mm) comprising of GI powder coated (on exposed surface )Main Tee of size 24 mm x 32 mm , having thickness 0.55 mm, Cross Tee of size 24 mm x 27 mm, having thickness 0.55 mm and Wall Angle of size 19 mm x 19 mm having thickness 0.35 mm, duly suspended with 2 mm dia GI bar hangers all as specified and directed by EIC.

M & L for 4 mm thick prepainted designer fibre cement board of size 595mm x 595mm, all as specified and directed by EIC.

M&L for Preparation of new ceiling surfaces of any description and applying three coats of white wash complete all as specified and as directed by EIC.

Demolition of brick work built in cement mortar including all quoins, arches, pillars etc. complete all as specified and as directed.

M&L, brick work with sub class ‘B’ kilburnt bricks (old size) straight or curved plan exc 6 m mean radius built in cement mortar (1:6) complete all as specified and as directed.

M&L, brick work with sub class ‘B’ bricks straight or curved on pla nany radius built in cement mortar (1:4) as half brick thick walls complete all as specified and as directed.

M & L, 15mm thick rendering other than fair faces of brick work/concrete surface in cement mortar (1:4) surface finished even & fair without using extra cement complete all as specified and as directed.

M&L, applying three coats of white wash including preparation of newly plastered surfaces on wall complete all as specified and as directed.

S & F mild steel flat iron 40mmX6mm as in wind ties including all necessary cutting welding , drilling holes etc complete all as directed

All as per item No 22 above but fixing only as in wind ties for any section complete all as specified and as directed.

S & F mild steel screw bolts machine made with hexagonal or square heads at one end and screwed the other or screwed both ends each screwed to be fitted with washers and one hexagonal or square nut, diameter of nut exc 11mm to 15mm and length of bolt exc 10 cm but n exc 15 cm long complete all as specified and as directed.

M & L for changing of bitumen and GI washer provided in top of AC roof sheet including opening the existing nut and bolt and u/s GI/ bitumen washer complete all as specified and as directed.

S & F Mild steel TMT bars 10mm and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips all as directed by Engineer in Charge.

All as per item no. 27 here in before but 8mm dia complete all as specified & directed by engineer-in-charge.

All as per item no.27 here in before but 8mm dia as in stirrups complete all as specified & directed by engineer-in-charge.

M&L, 15mm thick rendering on fair faces of brickwork or concrete surfaces, in cement mortar (1:4), surface finished even and smooth using extra cement, complete all as specified and as directed.

M & L for 15mm thick cement mortar (1:6) screed bed or bedding layer of mortar 15 mm thick for laying floor finishes all as specified & directed by Engineer in Charge.

M & L for Machine cut cudappah stone slab 20-25mm thick over cement screed base, laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified & directed by Engineer in Charge.

Rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations all as directed by Engineer in Charge.

M&L Non skid coloured ceramic tiles of first quality jointless 400mmx400mmx7-8mm thick as in floor etc. set and jointed in neat cement slurry and pointed in coloured cement to match the existing surfaces upto and including 15 mm thick screed bed or bedding layer of cement mortar (1:6) for laying floor finishes. complete all as specified and directed by Engr- In- Charge .

Material and labour for glazed ceramic colour tiles 300x200 x6-7mm thick as in skirting/dados etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles over 10mm thick rendering in cement mortar (1:4) complete all as specified and directed.

M&L for vitrified ceramic tiles 10 mm thick (square/rectangular) polished area of each tiles exceeding 0.18sqm but not exceeding 0.36 sqm ,in skirting/dado etc jointed in neat cement slurry over 10mm thick rendering in cement mortar (1:4), etc set complete all as specified and directed.

M&L for joint free matt finish ceramic tiles coloured 9mm-10mm thick of first quality jointless area of each tile exceeding 0.18 sqm but not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in coloured cement to match the existing surfaces upto and including 15 mm thick screed bed or bedding layer of cement mortar 1:4 for laying floor finishes complete all as specified and directed by Engr- In- Charge .

All as per item no 38 above but as in skirting/dado's etc over 10mm thick rendering in cement mortar (1:4) complete all as spd and directed.

Grniding & polishing to mirror polishing of existing kota stone complete all as directed by Engineer in Charge.

Suply and fix in repairs sinks made of stainless steel 1.0mm thick kitchen with plugs, washers and wastes including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm complete all as specified and directed.(Make: model No-BSSBSD-52 of Blue Star or SBSD05 of Jayna).

Material and labour for vitreous china ,squatting pan Orissa pattern size 580mmx440mm white with integral foot rest including connection as directed including taking down old pan and making good disturbed surfaces complete all as specified and directed.

Material and labour for vitreous china wash down water closet, pedestal pattern Pedestal pan and trap, including connection to drain (or outgoing pipe) and to flushing pipe, antisyphonage pipe, etc.and incl seat and cover for pedestal pan as in repairs complete all as specified and directed.

Supply and fix in repairs PVC low level cistern capacity 10 ltrs including flush pipe ,float valve syphon etc including 32mm dia PVC flush pipe of reqiured length and 15mm PVC connection exc 300mm long with PTMT nut and washers and connection including two Nos PVC brackets complete including taking down old one complete all as specified and directed.

Supply and fix vitreous China wash basin, white, flat back, size 580mmX450mm including brackets for fixing, 32mm waste coupling, waste pipe etc complete all as specified and directed.

Supply only Pillar taps, 15mm bore, fancy type cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with long screwed shanks and fly-nuts, screwed for iron pipe or for connection pipe complete all as specified and directed.

Supply and fix in repair grating doom 100mm dia of PTMT (Minimum weight 25 gms)complete all as specified and directed.

Taking up and down 15 mm dia steel tubing and connections including cleaning for refxing or removal to store all as directed.

Cutting chases, pinning in. making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing etc., and making good, cutting not exc 10 cm girth all as directed by Engineer in Charge.

Taking up and down 20 mm dia steel tubing and connections including cleaning for refxing or removal to store all as directed.

Supply and fix 15mm bore medium grade galvanized steel tubes with all fittings and fixed to wall and ceiling or laid in floors etc complete all as specified and directed.

All as per item Ser No-51 above but 20mm bore.

S&F in repair bib taps of 15mm bore fancy type, chromium plated cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for brass ferrule complete all as specified and directed.

S&F in repair angle cock of 15mm bore, chromium plated with long shank and cup cast copper alloy, screwed down, high pressure, with crutch handle, screwed both ends for brass ferrule complete all as specified and directed.

S & F 15mm dia Stop valves, fancy type, chromium plated with long shank and cup (concealed type), screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed all as specified & directed.

Supply and fix in repairs 125mm size brass chromium plated shower roses for fixing in 15 mm dia pipe complete all as specified and directed.

Suply and fix in repairs waste pipe of polyethylene of low or high density or PVC of 32 mm dia, for WHB & sink complete all as specified and directed.

Supply and fix in repairs waste coupling of PTMT of 40mm bore of discharge pipe of minimum weight 60 gms complete all as specified and directed.

S&F PVC (SWR) pipe single socketed in any length with rubber joints in trenches or in wall/floor 110mm bore complete all as specified and directed by Engineer-In- Charge.

All as per item No 59 above but double socketed

S&F PVC (SWR) pipe single socketed in any length with rubber ring joints fixed to wall of 75mm dia complete all as specified and directed by Engineer-in- Charge.

All as per item No 61 above but double socketed

S&F PVC (SWR) Bends any radius of 110 mm dia complete all as specified and directed by Engineer-in- Charge.

S&F PVC (SWR) Bends any radius of 75mm dia complete all as specified and directed by Engineer-In- Charge.

S & F 75mm dia PVC (SWR) branch piece, single (single Y) equal or unequal all as specified.

M&L for 75mm thick PCC type C-2 (1:3:6, using 40mm graded stone aggregate) as in plinth protection finished even and smooth u/o using extra cement all as specified & directed.

Taking down chaukhat with shutter (without taking of shutter from the frame) of any descipriton n.exc 1.5 sqm each complete all as spd and directed by Engr-in-Charge .

All as per item No 67 but exc 1.5 sqm but not exc 4 sqm

Taking down chaukhat with shutter (without taking ofshutter from the frame) of aluminium descipriton n.exc 1.5 sqm each complete all as specified and directed by Engr-in-Charge .

All as per item no.69 but exc 1.5 sqm but not exc 4 sqm

Taking down steel window/ventilater n exc 1.5 sqm each complete all as spd and directed by Engr-in-Charge .

Hacking out old brocken glass ( any thickness ,size quality or description) from old wooden frames /metal frame or stone , concrete or brick surrounds, glazing with putty or fixed with beads all as directed by Engineer in Charge.

M&L Chowkhat 2nd class hard wood and frames wrought , framed rebated on the solid rounded or chamfered , put together with glue pinned at joints complete all as spd and directed by Engr-In-charge.

Providing and Fixing Brand factory made UPVC (Rigid) single door frame (Choukhat) of size 50 mm , 47 mm height with a wall thickness of 5 mm (+0.5), made out of extruded 5 mm (+0.5) thick UPVC (Rigid) sheet of density 600 Kg/Cbm manfactured by an ISO - 9000 certified company, having pattam width of 15 mm and thickness of 10 mm providing wheather seal non-woven self adhesive gasket through out the frame. All three frames lengths reinforced with 19 mm / 19 mm M.S. square tube of 19 gauge metre cut at two corners and joined with two Nos of 150 mm long brackets of 15 mm /15mm M.S. square tube. The door frame shall be fixed to wall using 8/100 mm long M.S. square through the frame by using PVC fasteners. A minimum four Nos of screw to be provided for each vertical members and minimum 2 Nos for horizontal member etc, complete as per manufacturers's specification ad direction of Engineer-in-Charge.

S&F hand shower (Health fauset) ABS body with 8-10mm dia 1mtr long flexible tube and wall hook ,complete all as specified. Cat Part No.ALD-CHR-593N of Jaquar.

S&F glass self assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated guard and railing 60mm long all as specified. Cat part No. BEA-45 of Prayag Make

S&F chromum plated tubular towel rail, 20mm dia , D type, 600 mm long between flanges all as specified. Cat Part no. BA-70 of Prayag make.

S&F as in repair soap dish vitreous china white size 160x160x90mm appx all as directed by Engineer in Charge

S&F as in repair Hot and Cold type wall mixture with toilet shower arrangement, connecting legs & wall flange but without crutch and telephonic shower cpmplete all as specified. Cat Part- No.CON-217KN of Jaquar make.

Providing and Fixing 30 mm thick Factory made solid panel prelam / plain UPVC (Rigid) internal door shutter consisting of frame made out of M.S tubes 19 gauge thickness and size of 40 mm x 20 mm for stiles as well as top, lock & bottom rail. M.S frame shall have a coat of metal primer of approved make and manufacture. M.S. frame shall be covered with heat moulded prelam / plain 'C' Channel made from 5 mm (+0.5) thick UPVC (Rigid) sheet of density 600 Kg/Cbn manufactured by an ISO-9000 certified Company, of size 30 thickness, 100 mm width forming stiles in which 100 mm should be flat & 5 mm should be taper, and 5 mm (+0.5) thick, 135 mm wide UPVC (Rigid) sheet for top rail and bottom rail in which 125 mm should be flat & 5 mm taper on either side of panel, also for lock rial 145 mm sheet, 125 mm should be flat & 5 mm mm taper on either side. An additional 5 mm thick UPVC (Rigid) strip of 20 mm width is to be struck on the interior side of the 'C' channel using PVC solvent cement adhesive. Paneling of 10 mm prelam PVC sheet to be fitted in the M.S. frame welded/sealed to the stiles & rails with 30 mm wide x 5mm (+0.5) thick UPVC (Rigid) sheet beading on either side and additional 30 mm wide UPVC (Rigid) beading as gap insert below top and bottom rial joined together using solvent cement adhesive, 15 mm thick ( 5 mm (+0.5) x 3), 20 mm wide cross UPVC (Rigid)sheet as gap insert for top & bottom rail. Door to be fixed with frame with 3 Nos. M.S. powder coated butt hinges of size 100 mm *25mm*2mm and 50 mm long steel screws drilled suitable to pass through both the walls of the M.S tube, Other hardwares of door should be fixed with 25 mm * 8 mm size steel screws etc, complete as per directions of Engineer-in-Charge, manufacture's specification and drawing.

S&F Angle iron as in door frame & framed work as in doors or gates of angle and similar works conferming to Fe-410-w. including all necessary cutting welding complete all as spd and directed by Engr-In-Charge .

S&F 30mm thick flush shutter solid core construction with block board core and ply wood face pannels commercial type on both side complete all as spd and directed by Engr-In-Charge .

Providing and fixing 30mm thick factory made wire mesh solid UPVC (Rigid)door shutter consisting of frame made out of MS tubes of 19gauge thickness and size of 19mm x 19mm for stiles and 15mm x 15mm for top, lock & bottom rails. MS frame shall have a coat of metal primer of approved make and manufactured. 19mm x 19mm MS tube shall be covered with heat moulded plain sheet 'C' chaneel made from 5mm (+0.5) thick UPVC (Rigid) sheet of dencity 600Kg/Cbm manufactured by an ISO-9000 certified Company of size 30mm thickness, 90 mm width out of which 75mm shall be flat and 15mm shall be bent in 90o angle on either side forming stiles, one of the 90o bend edge is cut from stiles as well as rails to nail from inner side of door to hide wire mesh fixing steel screws. 5mm (+0.5) thick 115mm wide UPVC (Rigid) sheet out of which 100mm shall be flat and 15mm shall be bent in 90o on the inner side to form top and bottom rail and 130mm wide UPVC (Ridig) sheet out of which 100mm shall be flat and 15mm shall be bent in 90o on both side to form lock rail. An additional 5mm (+) thick UPVC (Rigid) strip of 20mm width is to be struck on the interior side of the 'C' channel using PVC solvent cement adhesive. Panel will be of GI/SS wire mesh of 24 gauge to be fitted inside area of stiles & rails. The wire mesh in top, bottom & lock rails is sealed with 15mm x 15mm tube with steel screw of size 13/6mm. 10mm (5mm x 2 Nos) thick PVC strip of 25mm width is to be stuck & nails on both side of GI wire mesh interior at the top, bottom & lock rail. 10mm thick (5mm x 2 Nos ) thick 20mm wide cross PVC sheet as gap insert for top rail & bottom rail door to be fixed to frame with 3 Nos MS power coated butt hinges size 100mm* 25mm*2mm and 32mm long steel screws drilled suitable to pass through both the walls of the MS tube. other hardwares should be fixed with 19*6mm size steel screws etc. complete as per directions of Engineer-in-Charge, manufacture's specification and drawing.

Providing & fixing factory made pre laminated PVC cabinet fabricated by joining four 18mm (+-0.7) thick PVC celuka ply fixed with each other using solvent cement adhesive and screw and 18mm (+-0.7) thick PVC sheet as backing of cabinet fixed with screw and solvent cement adhesive complete all as specified and directed.

All as per item No. 84 but for plain PVC celuka ply as in cell complete all as specified and directed.

S & F 15mm thick PVC sheet fillet of width 35mm for fixing of shelf etc completed all as specified and directed.

S&F 100mm Hasp and staple safty type aluminum anodised stove enamelled black including bolt to hinge plate and fixed with screw complete all as spd and directed by Engr-In-Charge.

S&F Ball catcher with 8mm dia steel ball and brass body and striking plate including letting in and fixed.

S&F for Piano Hinges mild steel bright finish 30mm flap all as spd and directed.

S&F 25mm dia, cupboard knobs fixed with nut, screw and washer of mild steel, bright finished complete all as specified and directed by Engineer -in-Charge.

S & F 150 mm Overall length of cover plate floor door stopper of aiuminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor all as specified

S&F factory made steel window with side hung shutter including box type hinges with steel handle and steel peg stay complete with glazing bars dovatailed or welded complete all as spd and directed by Engr-In-Charge .

S&F factory made steel window with side hung shutter including box type hinges with steel handle and steel peg stay complete without glazing bars dovatailed or welded complete all as spd and directed by Engr-In-Charge .

S&F steel ventilator with top hung shutter including hinges, steel peg stay complete

S&F framed work such as grill granting etc with end of bars shouldred and/or revated or forged into spikes framed guard bars barred iron doors and similar works conferming to Fe-410-0 or Fe 310-0 including all necessary welding complete all as spd and directed by Engr-In-Charge .

S&F 1mm thick mild steel plain black sheet in wall cladding steel gates and similar work, cut to size holes punched including round haded screws, clout nails to revates and fixed to wood or steel framing with plain 40mm lap joints with riveted or welded seams including bending or turning up, mitred angles etc as required complete all as spd and directed by Engr-In-Charge .

S&FMild steel flat iron 25mmX6mm as in hold fast including all nesessary cutting etc complete all as specified and directed.

M&L PCC 1:3:6 type C1 using 20mm graded stone aggregate as in bed block for fixing of hold fasts etc. all as specified & directed by Engineer in Charge.

M&L preparing surface of wood and wood based material new or old of any desription and girth not otherwise described and treated with tar or coal tar black paint treating ends of posts , bracks of chowkhats etc area tarred exc 0.1 Sqm but n.exc 0.5 sqm each complete all as spd and directed by Engr-In-Charge.

S&F Stainless steel wire cloth 0.46 mm nominal dia of wire & average width of aperture 1.40mm fixed to wooden fillet & beads complete all as spd and directed by Engr-In-Charge .

S&F in repair Stainless steel wire cloth 0.46 mm nominal dia of wire & average width of aperture 1.40mm fixed to wooden fillet & beads complete all as spd and directed by Engr-In-Charge .

S&F IInd class hard wood Small items such as brackets n.exc 200cucm , latch and hinge blocks, shapped door and window stops and the like inclduing all nex labours articles nexc 200 cucm each complete all as spd and directed by Engr-In-Charge.

S &F Mild steel sliding door bolts 250mm long , plate type stove enamelled black with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and two on staple plate and fixed complete all as specified and directed by Engr-In-Charge .

S&F aluminium alloy anodised sliding door bolts with hasp & staple & fixing clips of sheet,cast extruded section & fixing bolts& sliding bolts of extruded section on 250 mm long all as specified & directed.

S & F 100mm Butt hinges medium weight medium cold rolled mild steel complete all as spd and directed by Engr-In-Charge.

All as per item No 105 above but fixed in steel door including all necessary welding etc

All as per item No 105 above but size of 75mm

S&F Mild steel barrel tower bolts 150mm , stove enamelled black with bright bolt and fixed complete all as spd and directed by Engr-In-Charge .

All as per item No. 108 but tower bolt 100mm

S&F Mild steel pressed handles oveal type 150mm long , stove enamelled black complete all as spd and directed by Engr-In-Charge .

All as item no 110 above but size of 100mm

S&F of 100 mm size Butt hinges extruded aluminium alloy with galvanized mild steel hinge pin, anodized and fixed type B-21 complete all as specified.

S&F 150mm long aluminium anodised barrel tower bolt of extruded section complete.

S&F of 150mm size aluminium handles cast type anodised complete.

M & L for 3mm thick plain sheet glass ordinary quality & glazing with oil putty/ wooden beads n.exc 0.50 Sqm in each pane complete all as spd and directed by Engr-In-Charge .

All as above item no 116 but figured glass, pinheaded type.

M&L painting on new steel surfaces of any description not other wise described over 10cm width or girth applying two coat synthetic enamel paint over one coat of red oxide primer including preparation of surfaces complete all as specifed and directed by Engr-In-Charge .

M&L for painting on new wooden based surfaces of any description not other wise described over 10cm width or girth applying two coat synthetic enamel paint over one coat of pink primer including preparation of surfaces complete all as spd and directed by Engr-In-Charge .

S&F in repair MS ordinary rat tail rod pattern springs 250 mm including roller and roller plate on wooden /steel chowkhat incl welding ,riveting etc complete all as specified and directed by Engineer -In-Charge.

Supply only wooden beads of size 10mmx10 mm to 15mmX15mm of teak wood Square / triangular in cross section, plain or designer for fixing of net jali complete all as directed by Engineer in Charge.

Material and labour for aluminium chowkhat of two / three track system for sliding windows of standard section of approved manufacturer's as Hindaco / Jindal as approverd as in top, bottom & side portion in section, fixed to walls with anodised aluminium screw complete all as specified and directed by Engineer-in-Charge.

Material and labour for aluminium door chowkhat of of standard section of approved manufecturr's as Hindaco / Jindal as approverd as in top, bottom & side portiopn in section, fixed to walls with anodised aluminium screw complete all as specified and directed by Engineer-in-Charge.

S & F sliding window glazed or gauzed shutters, aluminium section of approved manufecturer's as Hindalco / Jindal as approved in shutter top & bottom, not divided into panels, including locking arrangement, necessary jointing cleats, glaging clips, rubber packing anodized aluminium holding and screw etc. complete all as specified and directed Note Glass/ Aluminium wire mesh shall be measured and paid for separately.

M & L for aluminium anodized grill of size 75x75x5mm thick with 30x18x1.5mm thick frame fixed to window chowkhat complete all as specified.

Supply only aluminium alloy wire cloth, 0.45mm nominal dia average width of aperture 1.90mm all as specified.

S&F aluminium glazed door shutter with two panel made aluminium section of approved manufecturer's as Hindalco / Jindal as approved of Vertical style ,top rail, bottom rail and middle rail all aluminum section incl all fittings as per door shutter such as aluminium door handles round type -02 nos stainless steel hinges 100 mm size-4 nos central mortice lick, aluminium tower bolts 300 mm - 2 nos double let aluminium anodized door stopper, necessary jointing cleats, glaging clips, rubber packing anodized aluminium holding and screw etc. complete all as specified and directed to receive 5.5 mm thick plain tinted glass or 12 mm thick pre-laminated perticle board in top ad bottom panel completed all as specified and directed. Note : Tinted glass and pre-laminated board shall be measured and paid for separately.

M & L for Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed all as specified.

S&F for 5.5 mm thick plain tinted galss area exceeding 0.50 sqm each pane fixed in aluminium frame as in door/window /partitions /ventilators complete all as specified and directed.

S&F for 5.5 mm thick plain tinted galss area n.exc 0.50 sqm each pane fixed in aluminium frame as in door/window/partitions/ventilators complete all as specified and directed.

S&F for 12 mm thick pre-laminated particle board, exterior grade, pre-laminated both sides with decorative choice lamination fixed in aluminum shutter/partition complete all as specified and directed.

M & L for 300x300x10mm thick paver rubber moulded laequered finish tiles complete all as specified and directed.

M&L for 75mm thick PCC type D2 (1:4:8), using 40mm graded stone aggregate) as in sub base complete all as specified and directed.

M&L, for complete removal of existing treatment on wall and applying two coats of cement based paint complete all as specified and directed.

M&L, for complete removal of existing treatment on wall and applying two coats of oil bound distemper complete all as specified and directed.

M&L, for preparation of old surfaces of ceilings including brooming down or steel wire brushing, scrapping down smokes soot moulds, moss and efflorescent salts and trading oil and greasy spot & applying one coats of oil bound distemper complete all as specified and directed.

Dismantling of brick (laid flat or edge)or brick tiles or cement concrete tiles in floors/roofs laid bedded and pointed in any mortar with and including removal of/taking out complete existing roof treatment (of full thickness) removing all loose particles from naked RCC surfaces and removing debrises material from premises complete all as specified and as directed by EIC.

M&L Cutting grooves in brick wall, 75mm wide and 65mm deep and shaping horizontal face of groove with cement mortar (1:3) all as specified.

M&L Cutting out cracks 15mm depth to V-section in existing roofs or terracing, cleaning out, wetting, grouting with cement and sand slurry (1:3) complete all as specified and as directed by EIC.

M & L for 20 mm thick screed bed in cement (1:4) for laying tiles over water proofing membrane complete all as specified and as directed by EIC.

M & L for plain ceramic paver tiles of size 300 x300 x10-12 mm thick laid over 15mm thick cement mortar bedding , jointed with neat cement slurry and pointed with grey cement mixed with pigment complete all as specified and as directed by EIC.

M&L for roof treatment consisting of following operation in sequence :- (i) Cleaning the existing naked roof surface with wire brush and providing 10mm thick rendering on fair faces of brick work/concrete surface in cement mortar (1:3) mixed with polymer based liquid water proofing compound @ 200ml per 50Kg of cement and surface finished even and smooth without using extra cement. (ii) Applying approved bituminous based primer conforming to IS:3384-1985 @ 0.5Kg/Sqm to be applied on top surface of prepared surface till the surface is properly impregnated. (iii) laying APP (Atactic polypropylene Polymer Modified prefabricated membrane) water proofing membrane of weight not less than 3 kg/sqm with minimum 7mm side overlap along the length from downward to upward completely sealed with torch application/hot blown lamps.

M&L providing treatment to sunken portion of toilet/bathroom consisting following manner :- (i) Cleanig the existing naked roof surface with wire brush and providing one number 32mm bore GI pipe medium grade 450mm long as spout pipe to external portion of sunken wall and 10mm thick rendering on fair faces of brick work/concrete surfaces in cement mortar (1:3) mixed with polymers based liquid water proofing compound of @200ml per 50 Kg of Cement and surface finished fair and even complete. (ii) Applying two layers of polymer modified bituminous elastomer water proofing coating @0.3 kg per Sqm of Proofcote black from Dr Fixit or equivelent fosroc /sikcto complete surface of sunken portion.

Taking out existing vitreous china water closet of any pattern complete with its flushing cistern taking out complete concrete filled in sunken portion to carry out treatment to sunken portion and removing rubbish off the premises all as directed by Engr-in-Charge

M&L for PCC (1:5:10) type D2 40mm graded brick aggregate filling in sunken portion except in sunken portion for fixing of water closet pan all as directed by EIC.

M & L PCC (1:2:4) type B-0 using 12.5mm graded stone aggregate) as in flooring, average thickness 25mm thick complete all as specified and directed by EIC.

S&F in repair 600mm x450mm decorative type mirror of superior quality glass, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers all as specified and as directed.

S&F as in repair Vitreous china wash down water closet pan (pedestral pattern), white (with and including flushing cistern and flush pipe), including connection to drain or outgoing pipe and to flushing pipe, anti-syphonage pipe etc. complete all as specified and as directed.

Use and waste formwork to sides of chajjas and similar work including edges complete all as specified & directed by Engineer in Charge.

Use and waste formwork to sides and soffit of floor or roof beams, beam haunching, girders, bressmers, lintels, cantilevers, shelves including supports, over hangs etc. splys between floors and beams etc. all as specified.

M&L for reinforced cement concrete (Design Mix M-25) as in roof beam complete all as specified & directed by Engineer in Charge.

M&L for reinforced cement concrete (Design Mix M-25) as in fins, facias, lovours, parapets and railing exceeding 60 cm height, newel, balustrade and the like complete all as specified and directed.

M&L for applying chemicals for making bonding of new and old concrete surface as per manufecturers instruction complete all as specified & directed.

M&l for 10-12mm thick Granite tiles , machine cut, as in vertical surface laid in cement slurry and pointed with white cement with admixture of pigments to match the shade of granite stone including necessary grinding and polishing all as specified

M&l for rendering 5mm thick in cement mortar on concrete surface as in ceiling including finish the surfaces fair and even without using extra cement complete all as specified & directed by Engineer in Charge.

Supply only Integral water proofing compound complete all as specified.

M&L for preparation of new wall surfaces of any description and applying two coats of cement base paint over a coat of alkaly resistance primer complete all as specified & directed.

M&L for providing two coat of oil bound distemper on prepared surface of wall / ceiling surfaces of any description and over a coat of alkaly resistance primer complete all as specified & directed.

M&L for preparation of new wall / ceiling surfaces of any description using 1.20 Kg/Sqm JK or Birla white putty to have even and smooth surface for application of further finish complete all as specified & directed.

SECTION-II Demolition of Reinforced cement concrete (reinforcement cut as required to facilitate demolition) all as directed by engineer-in-charge

M&L for vitrified ceramic tiles 10mm thick (square /rectangular) polished, area of each tiles exceeding 0.18 sqm but not exceeding 0.36 sqm, in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15mm thick screed bed or bedding layer of cement mortar (1:6) for laying floors finishes, complete all as specified and directed by engr-in-charge.

S&F 110mm dia PVC (SWR) branch piece, single (single Y) equal or unequal all as specified.

Providing cement concrete in roof kerbs or mud stones rounded or chamfered on edges type B-1 (1:2:4) using 20mm graded stone aggregate all as specified and directed.

Taking out existing complete roof treatment of full thickness of without tile finish top surface and removing all loose particles from naked RCC surface and removing debris from premises complete all as specified and directed by EIC

M&L plain cement concrete (1:2:4) type B-0, using 12.5 mm graded stone aggregate as in padding to roof to maintain the required slope and finished the surface even and smooth without using extra cement, complete all as specified and directed by EIC.

M&L for roof treatment consisting of following operation in sequence :- (i) Cleaning the existing naked roof surface with wire brush and providing 10mm thick rendering on fair faces of brick work/concrete surface in cement mortar (1:3) mixed with polyme based liquid water proofing compound of Make : Pidiproof LW or Dr Fixit @ 200ML (ii) Applying approved bituminous based primer confirming to IS:3384-1985 @ impregnated (iii) Laying APP (Atactic polypropylene polymer modified prefabricated membrane) water proofing membrane of weight not less than 3 kg/sqm with minimum 10mm side overlap along the length from downward to upward completely sealed with touch application/hot blown lamps. (iv) Applying two coats of bituminous based aluminium paint @ 0.2kg/sqm complete all as specified and directed.

Use and waste form work to soffit of suspended floors such as roof slabs, floor slab, landing and similar work, not exceeding 200mm thick (Horizental or sloping) all as specified.

M&L for reinforced cement concrete (Design Mix M-25) as in chajjas and similar work complete all as specified & directed by EIC.

M&L for reinforced cement concrete (Design Mix M-25) as in slab supported on wall, beams and column, floors, roofs, balconies, canopies, deck slab and as in shelves and the like complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (bt not backing), remoing serviceable tiles to store and rubbish off the premises all as directed by engineeer-in-charge

M&L for glazed ceramic colour tiles of first quality jointless area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm ,in floors etc set and jointed in neat cement slurry and pointed in coloured cement to match the existing surfaces upto and incl 15mm thick screed bed or bedding layer of cement mortar 1:6 for laying floor finishes complete all as specified and directed by Engr-in-charge.

Running welding in repairs thickness of metal to be welded exc 6mm but n exc 9mm all as directed by Engineer-in-charge.

upadhyay engineers and consultant

Kunwar Constructions Private Limited.