Loading
Loading…
Loading…
| # | Company | Status |
|---|---|---|
| 1 | Admitted-Fee/PreQual/Technical | Admitted-Fee/PreQual/Technical |
| 2 | Admitted-Fee/PreQual/Technical | Admitted-Fee/PreQual/Technical |
| 3 | Admitted-Fee/PreQual/Technical | Admitted-Fee/PreQual/Technical |
Tender Value
₹37.9 L
EMD Value
₹76,000
Closing Date
14 Sept 2026, 6:00 pmClosed
GE (WEST) BAREILLY
GE (WEST) BAREILLY
PROVN OF TEMPORARY PARKING SHED FOR BSS VEH OF SATA REGT AND CERTAIN SANCTIONED WORKS UNDER GE (WEST) BAREILLY.
2026_MES_783957_1
8402/C/E8
Open Tender
Civil Works
Item Rate
180 days
GE (WEST) BAREILLY
Please refer Tender documents.
8 documents required · 8 mandatory
₹500
GE (WEST) BAREILLY
₹76,000
Yes
16 Sept 2026
11 Aug 2026
16 Sept 2026
11 Aug 2026
14 Sept 2026
27 Aug 2026
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1 | Surface dressing not exc 15cm deep and getting out in soft/loose soil complete all as specified and directed. | 126 | Sqm | -1 | - |
| 2 | Excavation in trenches, not exceeding 1.5 M wide and not exceeding 1.5 M depth for foundation, etc., and getting out in soft/ loose soilcomplete all as specified and directed. | 41.47 | Cum | -1 | - |
| 3 | Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm in soft/loose soil complete all as specified and directed. | 22.77 | Cum | - | - |
| 4 | Removing excavated material n exc. 50m and depositing where directed at a level n exc. 1.5 m above the starting point complete all as specified and directed. | 18.69 | Cum | 1 | ₹18.69 |
| 5 | M&L for Plain Cement concrete 1:4:8 type D2 (Nominal Mix) using 40 mm graded stone aggregate in foundation filling and mass concrete complete all as specified and directed. | 7 | Cum | 2 | ₹14 |
| 6 | M & L for mild steel TMT bars of 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed by the Engineer-in-Charge | 1,640 | Kg | 3 | ₹4,920 |
| 7 | M & L for mild steel TMT bars of 6mm to 8mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed by the Engineer-in-Charge | 250 | Kg | 3 | ₹750 |
| 8 | M & L for formwork to sides of concrete foundations, footings, bases of columns, raft and beams, sides and soffits (if any) of foundation and plinth beams , and similar work, vertical or to batter, work in rough finished flat surfaces of concrete complete all as specified and as directed by the Engineer-in-Charge | 50 | Sqm | 4 | ₹200 |
| 9 | M&L Formwork to Formwork to sides of pillars, posts, struts, piers, columns and stanchions rough finished surfaces complete all as specified and as directed by the Engineer-in-Charge | 35 | Sqm | 4 | ₹140 |
| 10 | M&L Formwork fair finished surfaces of concrete soffits such as Flat roof slabs, floor slabs, landings and similar work, not exceeding 200mm thick (Horizontal or sloping) complete all as specified. | 25 | Sqm | 6 | ₹150 |
stage.html
html • 0.02 MB
tech_bid_open.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 3.52 MB
BOQ_878379.xls
BOQ • 0.33 MB
COMPLETETENDER8402.pdf
Tender Documents • 1.79 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .