REPAIRS/ CLEANING OF SEWER LINES AND SEPTIC TANKS AND OTHER CONNECTED MISC WORKS UNDER AGE B/R II, GE(AF) NO2 JODHPUR.

Amount

Cleaning of septic tank and soak pit of any capacity & any size by taking out sludge and sludge loading to the cart/ lorry & depositing out side MD land including bailing out foul water by manually or by any mechanical means in tanker and dispose the waste water out side MD land and all as specified and directed by Engr-in-Charge. Note:- (i) Rate quoted includes bailing out water from septic tank upto 2/3 depth of tanks and removing sludge. (ii) The measurements for sludge upto depth of 1/3 of septic tank shall only be recorded for payment purpose

Removing blockage of soil/waste pipe of any dia and cleaning the lines in between followings with water all as directed by the Engineer-in-Charge :-

(i) Floor/Nahani trap to Gully trap and upto first man-hole.

(ii) WC to first manhole Note :- Rate quoted for item No 2 (i) and (ii) deemed to includes cleaning/ removing of blockage of first manhole and taking out slude from out side MD Land.

Cleaning of 100/150/200 mm bore SGSW pipe lines in between two consecutive manholes to the entire satisfaction of Engineer-in-Charge and testing by pouring water from manhole to manhole. Note for item No 3 :- (i) Measurement for these items shall be recorded from inner face of walls between two consecutive manholes. (ii) If cleaning of sewage line is not feasible without removing sludge from the manhole. The sludge from the manholes shall be cleaned all as decided by the executive and shall be measured and paid separately under item No 5. Note for item No 2,3 ,4 & 5 :- If any blockage removed by the contractor will reoccur due to negligence in workmanship by the worker within ten days of cleaning, the same shall be recleaned without any extra cost to the Govt.

Cleaning of manhole of any description, any size and depth including removing sludge and deposited outside MD land etc complete all as directed by Engineer-in- Charge.

Cleaning of SGSW pipe of 100/150/200 mm internal dia between two consecutive manhole with sewer jet machine to the entire satisfaction of Engineer-in-Charge and testing by pouring water from manhole to manhole.

Excavating in trenches in soft/loose soil, n.exc. 1.5m wide and n.exc 1.5 in depth, for foundation, etc. or for shafts, wells, cess pits, manholes, pier holes, etc n.exc. 10 sqm on plan and n.exc 1.5m in depth and getting out.

All as per item No 6 above but exc. 1.5 m but n.exc. 3.00 m in depth

Demolition of stone/boulder masonry, built in cement mortar including all quoins, arches, pillars, etc. and removing from site all as specified and directed.

M&L for squared rubble walling, Jodhpur type, brought up to courses, well bonded, bedded and solidly hearted, built in CM 1:4

M&L for rendering 15 mm thick in CM 1:4 on stone masonry surfaces finished even and smooth without using extra cement.

M&L for rendering 10 mm thick in CM 1:4 on stone masonry surfaces finished even and smooth without using extra cement.

M&L for cement concrete (1:4:8) type D2 using 40 mm graded stone aggregates as in foundation, filling and mass concrete all as specified and directed.

M&L for PCC 1:3:6 type C-1 using 20 mm graded stone aggregate in cills, steps, bands, copings, bed plates, blocks for inserting hold fasts etc. and the like including weathering, slightly rounded or chamfered angles and throating as directed.

M&L for cement concrete (1:2:4) type B1 using 20mm graded stone aggregate as in surface channels, drains (forming fair finished channel shall be measured and paid for separately).

Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete using extra cement including forms, moulds mitered/stopped ends, etc all as specified.

Add or deduct from item No. 15 above for each 25mm girth or part thereof over or under 30cm (this is only for adjustment of rates).

M&L for Jodhpur stone roof slabs, self faced 7.5 cm to 10 cm thick, 25 cm to 35 cm wide, hoisted and set, jointed and grouted in cement mortar 1:3 complete as in manhole cover and soak pit.

Dismantling stone slabs in roofs, suspended floors, chajjas, landings, etc. any thickness, jointed in any mortar (broken stone patti manhole covers/ soakage pit roof slab ) .

M&L for precast reinforced cement concrete 1:2:4 type B1 using 20 mm graded stone aggregate in landings, cover slabs (for manholes etc.) chullah hoods, chajjas, shelves and similar articles with plain faces, set in CM 1:4, including necessary form work moulds etc all as specified. (Reinforcement shall be measured and paid for separately).

M&L for mild steel TMT bars 10 mm dia and over, cut to length, bent to shape required including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia.

Demolition and breaking up drain pipes, 100/150/200 mm internal dia (Salt glazed stoneware, AC or reinforced concrete) (internal dia) set in cement mortar including haunching and bed concrete.

M&L for cement concrete 1:4:8 type D-2 using 40 mm graded stone aggregate as in bed to drain pipes of size 150 mm bore, including packing under & haunching against the sides of pipes after they are laid and tested.

M&L for salt glazed stone ware drain pipes of 150 mm internal dia, grade `A’ ISI marked laid to slope in trenches, jointed in CM 1:1 and tested complete all as specified and as directed.

Returning, filling in (soil), including spreading, leveling, watering and well ramming in layers not exc. 25cm.

Removing excavated material (soil) n.exc. 50 m and depositing where directed at a level n.exc. 1.5 m above the starting point.

Cutting into existing manholes for connecting new drains of 150mm internal dia, making good to pipe and rendering, cutting out existing benching for and forming branch channel ( ½ round or 3/4 Section) in cement concrete 1:2:4 type B-1 smooth finished and reforming benching as required.

Dismantling of cat iron or reinforced concrete drain pipe, jointed in cemented mortar and taking out of trenches or in vertical position all as directed by the engineer incharge

S&F 100 mm bore cast iron, sand cast, soil, waste and vent pipes, in any length with or without ears, with cement joints, fixed to walls.

S&F CI Bends (any radius) for 100 mm bore pipe, diminishing pieces or tapers (larger bore measured) and complete.

S&F 100 mm bore CI vent cowl.

Demolition of cement concrete of any description and in any position not otherwise specfically provided

M&L for 40 mm thick PCC 1:2:4 type B-1 using 20 mm graded stone aggregate as in floors, finishing cement concrete surface even & smooth with using extra cement.

M&L for 75 mm thick PCC 1:3:6 type C2 using 40mm graded stone aggregate in plinth protection. Concrete shall be laid in alternate bays n.exc 3 m in length finished fair and even including provision of joints of 6 mm wide and 10 mm deep along the wall and bays filled with bitumen mastic (1:3).

S&F Non skid ceramic tiles white coloured 7 to 8 mm thick area of each tiles exc. 0.06 Sqm but n. exc. 0.11 Sqm, in floor, set and jointed in neat cement slurry & pointed in white or coloured cement to match including 15 mm thick screed bed in CM 1:6.

M&L 25mm thick PCC 1:2:4 type B-0 (using 12.5 mm graded stone aggregate).

S&F PVC (SWR) gully traps of size 125/110 mm,setting and jointing with solvent cement and complete.

S&F in repair for PVC (SWR) pipes 110 mm dia single socketed, in any length with rubber ring joints laid in trenches or in floors

S&F in repair for PVC (SWR) pipes 110 mm dia single socketed, in any length with rubber ring joints fixed in walls

S&F in repair for PVC (SWR) pipes 75 mm dia single socketed, in any length with rubber ring joints laid in trenches or in floors

S&F in repair for PVC (SWR) pipes 75 mm dia single socketed, in any length with rubber ring joints but fixed in walls

S&F in repair for PVC (SWR), junction single, (Single T) with door 110 mm dia equal or unequal

S&F in repair for PVC (SWR), junction single, (Single T) with door75 mm dia equal or unequal

S&F in repair for PVC (SWR) door bends 110 mm dia

S&F in repair for PVC (SWR) door bends 75 mm dia..

S&F in repair for PVC (SWR) Cowl 110 mm dia

S&F in repair for Reducer 100 mm dia

S&F in repair for PVC (SWR), 75mm dia of floor trap, with grating including jointing wit solvent cement and complete.

S&F in repair for Grating doom 100 mm dia of PTMT (Minimum weight 25 gms)

S&F in repair for Grating doom 125 mm dia with waste hole of PTMT (Minimum weight 25 gms)

S&F in repair grating sqare fitting of size 150 mm made in two parts for smell and mosquito proofing with minimum 25 mm water seal of PTMT. (minimum weight 85 gms)

S&F in repairs waste coupling of size 32 mm PTMT (half or full threaded) (min weight 45 gms)

S&F in repairs, EWC vitreous china wash down water closet pan (pedestal pattern), white, with and including plastic water closet seat, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device fixed and connecting flush pipe to pedestal pan including all joint complete all as specified.

S&F in repairs vitreous china squatting pan, ‘Orissa’ pattern, size 580 mm x 440 mm, white with integral foot rests, including PVC 'P' trap, embedded and set in PCC 1:5:10 type E-2, connecting flush pipe to squatt pattern closet including all joints and making good to floor.

S&F in repairs PVC valveless syphonic action 10 litres capacity for low level flushing cistern, white, with inlet, ball valve, float and handle including brackets connection to pipes and complete all as specified.

S&F Vitreous china urinals, Half stall type, white bowl type (back or corner wall type, complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinals to plugs with and including 60 mm long brass screws, pointing around urinal back in cement: fixing automatic flushing cistern with brackets, flush pipe , grating and union for discharge pipe. (excluding , flushing cistern, trap and waste pipe)

Fixing only in repairs vitreous china wash basin, (flat back or angle back type) any size including cutting for and pinning in ends of brackets or erecting stand, including provision of brass chromium plated perforated waste coupling/fittings 32 mm dia with long screwed shanks and fly nuts, flange end bedded in red lead cement and other end fixed and PVC waste pipe of 32mm bore and of suitable length, complete all as specified.

S&F in repair sink with drainage board made of stainless steel 1.00mm thick kitchen or laboratory with plugs, washers and wastes, including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915 mm x 460 mm, bowl size 410mm x 330 mm x 160 mm and PVC waste pipe of 32mm bore and of suitable length, complete all as specified.

Fixing only in repairs sink made of stainless steel any type kitchen or laboratory with plugs, washers and wastes, including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, complete all as specified.

S&F in repairs 32 to 40mm dia waste pipe, suitable for urinals, wash hand basin, sink and complete all as specified.

S&F in repairs vitreous china wash basin, white, flat back, size 550x400mm including brackets, cutting for and pinning in ends of brackets or erecting stand, brass chromium plated perforated waste coupling/ fittings 32 mm dia with long screwed shanks and fly nuts, flange end bedded in red lead cement and other end fixed and PVC waste pipe of 32mm bore and of suitable length, complete all as specified.

Dismantling of barbed wire / wire mesh / chain link mesh / fencing wire from any type of posts etc all as described

Dismantling of wrought iron or mild steel work of any despcription not otherwise provided for and complete.

Excavating for soft/loose soil in post holes (or similar) each n. exc 0.5 cum getting out returning filling in and ramming earth or broken rubble mixed with earth around in layers not exceeding 25 cm.

M/L cement concrete type C-2, 1:3:6 ( 40 mm graded aggregate) in foundation filling mass concrete for post holes etc complete all as specified and directed.

S&F mild steel jois angle channel or tee sections and fix independently in concrete as fencing posts and similar work confirming to Fe 410 or Fe -310-0

Fixing only chain link fencing including line wire, any mesh, size and type to any type of standards, rails, straining bolts, etc including provission of binding wire. Complete all as specified and directed.

Supply only Chain link MS galvanised fencing, any size or type complete all as specified and directed.

S&F mild steel screw bolts (machine made )100mm long, 12mm dia with hexagonal or sqsuare head at one end and screw the other, or screwed bolt ends, each screw end to be fitted with washer and one hexagonal or square nut, exc 5cm but n.exc 10cm long.

S&F in for mild steel screw bolts 5to 10mm dia (machine made) with hexagonal or square heads at one end and screwed the other or screwsd the both end and to be fitted with washers and one hexagonal or square nut not exceeding 05 cm long fixed as line wire completed all as specified and as directed.

S&F plane round bars 10mm dia and over, cut to length, FE-410- (Gde E-250 quality-A or Fe290 (Gde-E-165) bent to shape required, including cranking, bendingspirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

S&F galvanised 2 strand steel barbed wire 2.24 mm dia barbed with 2 mm dia barbs @ 75 mm spacing and strining and fixing to any type of standards rails straining bolts incluidng securing or type at crossing etc

M&L for two coats of synthetic enamel paint over a coat of red oxide primer incluidng preparation of new teel surfaces

M&L for dismantling floor heart or wall tiling including cement mortar bedding (but not backing) and rubbish off the premises and complete all as specified.

M&L for coloured glazed ceramic coloured tiles of size 350x 250x 7mm/450x350x7mm thick on walls/vertical surfaces including 10mm thick renderinjg in CM 1:4, all as directed.

M/S IK CONSTRUCTION

BAGHELA CONSTRUCTION

CHOUDHARY CONSTRUCTION CO

Bansal Enterprises

DEV INDUSTRIES