M/o W/s (Two Year Cleaning of UGR/OHT, Painting and Renovation work, R/o Fire fighting, Motor Guage filling of pea-gravel and P/L interlocking tiles in Network sector-1 to 7) Noida

Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in - charge. Nominal concrete 1:3:6 or richer mix (i/c equivalent design mix)

Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster i/c disposal of rubbish to the dumping ground within 50 m lead.

12 mm cement plaster of mix : 1:4 (1 cement: 4 coarse sand)

Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm in depth consolidating each deposited layer by ramming & watering, lead upto 50 m and lift upto 1.5 m.

Providing and applying plaster of paris putty of 2mm thickness over plastered surface to prepare the surface even and smooth complete.

Finishing walls with Acrylic Smooth exterior paint of required shade : New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm)

Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade : Two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture

Supply, Lowering & Showing the annular space between Tube Well bore and assembly with 2mm to 5mm thick Pea gravel.

Repairing of OHT meter gauge indicator i/c S/F of plastic float ball (250 mm dia), brenzo wire (5mm dia) M.S. wire (2 mm dia) and Aluminium pully and OHT meter gauge indicator refixing in position at site with M.S.clamp with R.C.C. column after painting and letter writing incuding scaffolding with rassi, ball and challi, up to bottom o cone wall.

P/L chemseal of equivalent injection water proofing (post construction) treatment to the under ground structure as per direction of the architect Engineer in charge i/c cost of all labour & materials. The injection method will include under mentioned operations. a) Operation I : Holes about 20 to 25 mm in and 25 to 40 mm deep are to be made & about 1.0 to 1.5 M apart in the entire floor and walls in addition all the constructions joints are opened by making grooves as to reach reinforcement are then fixed in these holes. b) Operation II: After left the nozzle to set for about 24 hours chemseal cement slurry is injected through those nozzel under pressure or by gravity which runs through minute and cracks in the entire structure. c) Operation III: The nozzel are then removed and 40 mm thich chemseal cement plaster with stone agg. Embedded is laid at the bottom.

R/o Fire Fighting P/F 100 mm dia Sluice Valve shall generally conform to IS 14846 with latest amendment, with length over flanged as per PD of IS 14846 corresponding to BS EN-558 / ISO 5752 Basic series 3 in CI construction having metal seating (IS 318 Gr. LTB 2). With comple component & material of construction following below:- 1 - Body / Door / Dome - Cast Iron IS 210 Gr. FC 260 2 - Spindle - Non rising: Stainless Steel AISI 410 3 - Body seat / Door face - Gun metal : IS 318 Gr. LTB 2 (rings to be press fitted and riveted: no screws allowed) 4 - Rivets - Soft annealed brass 5 - Spindle Nut - Gun metal : IS 318 Gr. LTB 2 6 - Stem Seal - Greased Hemp 7 - Fasteners - Carbon steel 8 - Flange Drilling - IS 1538 Table 4 & 6 9 - PN 1.0 10 - Accessories (400 mm and above) - Ball thrust bearings to be housed above the wet chamber ie. above the gland. Enclosed Spur Gear Box for ease of operation. Air Plug 11 - Painting / Coating - Inside & Outside epoxy liquid coated; DFT minimum 250 micron, shade RAL 5005 / 5015 (BLUE) 12 - Hydro-test-(Open Ended only) (Seat : 10/16 Kg/cm2; Body: 15 / 24 Kg/cm2 13 - Upto 600mm dia Mannual Operated & above 600mm Gear box Make-Indian Valve Pvt. Ltd. (IVC) / Kirloskar Brothers Limited KIRLOSKAR)

Excavating trenches of required width for pipes, cables etc. including excavation for sockets, and dressing of sides, ramming of bottoms, depth upto 1.5 m, including getting out the excavated soil, and then returning the soil as required, in layers not exceeding 20 cm in depth including consolidating each deposited layer by ramming, watering etc. and disposing of surplus excavated soil as directed, within lead of 50 m. The contractor has to detect different utilities like sewer line, water supply line, electric cable, telephone cable, gas pipe line etc. using utility detecting machine before start of excavation and shall start excavating only after getting permission of Engineer-in-Charge. All kinds of soil. Pipes, cables etc. not exceeding 80 mm dia.

P/L following size of Finolex makes PVC pipes 6 Kg/Cm2 with required PVC standard special confirming to IS codes with latest amendment and lowering the same trenches and laying true to alignment and gradient complete i/c the cost of cutting of pipes for making up to length and making joints i/c cost of socket, plstochem PV-85 pvc solvent cement complete. PVC pipe must be confirming to IS:4985-2000 with latest amendment. Make-Finolex Industries Ltd./Kisan/Superme Industries Ltd. (Rate As per Comparative Statement Per. Rm.) 110 mm dia with coupler @ 6 Kg/Cm2 Pressure with i/c all PVC standard Specials

White washing with lime to give an even shade New work (three or more coats)

P/F M.S. specials such as Tee, Bend, Collars, Tapers, Gap pieces, including Flange Ends as required, Painting, Cutting, welding as per site requirement of MS pipe thickness etc complete in all respect as per direction of E/I.

Cleaning of U.G.R. i/c removal of algae, fungous, sand, scrubbing with wire brush narial rassi, sweeping the jharu to give a clear surface, washing of floor & walls inside the tank i/c washing of vertical walls & columns, spraying on the inside of tank walls and ceiling non-toxic, biodegradable anti-bacterial agent license from Food and Drugs Administration (FDA) and certified for tank cleaning as per OECD guideline 432 Dec'01 (Necessary certificate should be attached)

Cleaning of Over Head Tank 22.0 m. High staging i/c sweeping & serubbing of bottom & side surface & also cleaning & disposal of silt, sand by manual & also by chain pulley block arrangement complete with supporting & rassi arrangement i/c washing of wall surface with water pressure with jet pump, spraying on the inside of tank walls and ceiling non-toxic, biodegradabie anti bacterial agent lincese from Food and Drugs Administration (FDA) and certified by Govt. approved laboratory for non toxicity of anti bactirial for tank cleaning as per OECD guideline 432 Dec'01 (Necessary certificate should be allached) Cost for 1 Job for 1200 KL OHT

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:4:8 (1 Cement : 4 coarse sand (zone-III) : 8 graded stone aggregate 40 mm nominal size)

Providing and laying at 60 mm thick level factory made cement concrete interlocking paver block of M-30 grade made by block making machine with strong vibratory compaction and of approved size and design/shape laid in required colour and pattern and i/c 50 mm thick compacted bed of course sand, filling the joints with coarse sand etc. all complete as per direction of E/I.

Brick work with bricks of class designation 100 in super structure above plinth level up to floor five level in all shapes and size in cement mortar 1 : 4 (1 Cement : 4 C. Sand).

Please Enable Macros to View BoQ information

CAPABILITY STATEMENT

* It is compulsory for the bidder to fill this statement and the bidder must upload only those document that support this statement

Tender Reference No : 12/SM(JAL)-I/ET/2025-26

Not Provided

Name of Tenderer

TOTAL NIT COST OF PROJECT (In Rs.) (In lacs)

Minimum Value

SOLVENCY (Issued within a period of maximum six months).

EXPERIENCE (WITH GOVERNMENT/SEMI- GOVERNEMTN/ PSUs ONLY) completed works during the last 7 years ending last day of the month previous to the one in which applications are invited

NOT QUALIFIED

NOT QUALIFIED

Two similar completed works each costing not less than the amount equal to 60% of estimated cost put to tender

NOT QUALIFIED

One similar completed works costing not less than the amount equal to 80% of estimated cost put to tender

RESULT OF EXPERIENCE

TURNOVER (During the immediate LAST 3 consecutive financial years)

Average annual financial turnover on construction works should be atleast 30% of the estimate cost during the immediate last 3 consecutive financial years.

Required Technical Staff

Required Machinary

Character certificate of Individual/Partners/directors issued from District Magistrate.

Affidavit of Not blacklisted.

Address Proof/ Id.Proof of Individual/partners/directors.

GST Registration certifcate.

Filled in form Capability Statement..

Self declaration affidavit on Rs. 100/- Notarised Stamp paper

Latest ITR

Affidavit of stating No Blood relative in Noida Authority (Regular / Contract)

Certified Copies of relevant pages of following documents:

Note :- If Tender value is Ten lacs & below Ten lacs then above condition no.-1, 2 & 3 will not applicable.

RESULT