Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Infra Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹23.4 LAccepted-AOC 578 AVAS VIKAS JANAKPURI B IZATNAGAR BAREILLY 243122 UP | BAREILLY | UTTAR PRADESH | 243122 | L1 | Accepted-AOC Being reasonable | |
| 2 | L2₹25.9 L+₹2.4 L (10.4%)Rejected-Finance | L2 | Rejected-Finance Not being L1 | |
| 3 | L3₹26.8 L+₹3.3 L (14.2%)Rejected-Finance 121 BEHARIPUR MEMARAN BAREILLY UP PIN 243001 | BAREILLY | BAREILLY | UTTAR PRADESH | 243001 | L3 | Rejected-Finance Not being L1 | |
| 4 | L4₹26.8 L+₹3.4 L (14.4%)Rejected-Finance 001 00 BANK COLONY SHIVPURI SHIVPURI MADHYA PRADESH 473551 | SHIVPURI | MADHYA PRADESH | 473551 | L4 | Rejected-Finance Not being L1 | |
| 5 | L5₹27.3 L+₹3.9 L (16.7%)Rejected-Finance 232 1 D SHIVLOK KANKARKHERA DISTT MEERUT UP PIN 250001 | MEERUT | MEERUT | UP | 250001 | L5 | Rejected-Finance Not being L1 |
Tender Value
₹42.7 L
EMD Value
₹85,400
Closing Date
11 Dec 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Lt Col Shilpam Bharali
Garrison Engineer (AF) Military Engineer Services, Bareilly 243002 (UP)
8767 SPECIAL REPAIRS TO BLDG NO. T-12 TO T-15 AT AF STATION BAREILLY
2023_MES_628327_1
8767/E8
Open Tender
Civil Works
Item Rate
180 days
Bareilly
Class D
Category a(i)
8 documents required · 8 mandatory
₹500
Garrison Engineer (AF) Bareilly
₹85,400
Yes
22 Dec 2023
15 Nov 2023
13 Dec 2023
15 Nov 2023
11 Dec 2023
29 Nov 2023
Amount
Demolition of brick work or stone/ boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stone work and precast concrete articles all as directed.
M&L for brick work with fly ash bricks straight or curved on plan exc. 6m mean radius using old size bricks built in cement mortar (1:6) all as specified.
Taking up or down galvanized steel tubing 15mm bore with fittings.
Taking up or down galvanized steel tubing 20mm bore with fittings.
S&F GI tubes 15mm bore dia medium grade galvanized, with all fittings and fixed complete to walls and ceilings or laid in floors complete all as specified and as directed.
S&F GI tubes 20mm bore dia medium grade galvanized, with all fittings and fixed complete to walls and ceilings or laid in floors complete all as specified and as directed.
Refixing old GI tubing 20mm bore dia and connecting in new or old location including cleaning etc. complete all as specified and as directed.
S&F rotational moulded polyethylene water storage tanks, double layered of capacity 1000 ltrs (cylindrical vertical with closed top) hoisted and fixed in position complete including necessary GI tank nipples, taking down existing unserviceable tank all as specified and as directed by Engineer-in-charge.
S&F in repairs Ball valves 20mm bore dia, high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe and fixed [Minimum weight: 210gms] all as specified including taking down existing unserviceable valve.
S&F Cast iron floor trap, long neck type without grating including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4) with dia of outlet 75mm complete all as specified.
S&F Cast iron soil, waste and vent pipes 75mm bore, sand cast in any length with or without ears, with cement joints, laid in trenches or in floors all as specified.
S&F Cast iron soil, waste and vent pipes 100mm bore, sand cast in any length with or without ears, with cement joints, fixed to walls all as specified.
S&F of 100mm bore cast iron bend (any radius), diminishing piece or taper (larger bore measured) complete all as specified and directed.
S&F of 75mm bore cast iron bend (any radius), diminishing piece or taper (larger bore measured) complete all as specified and directed.
S&F cast iron cowl 75mm
S&F 100mm bore cast iron branch pieces, single (equal or unequal), ordinary or inverted (spigot or socket type) or with parallel branches complete all as specified and as directed.
S&F 75mm bore cast iron branch pieces, single (equal or unequal), ordinary or inverted (spigot or socket type) or with parallel branches complete all as specified and as directed.
S&F Stack clamps for 75mm bore pipe out of 50mm by 5 mm flat iron and 16mm dia round iron stays, including bolts and nuts and securing ends of stays to wall or roof complete all as specified.
Dismantling of cast iron or reinforced concrete drain pipes 75/ 100mm dia, jointed in cement mortar and taking out of trenches, if required
S&F in repairs vitreous China squatting pan, Orissa pattern, size 580x440mm, white with integral foot rests, 'P' or 'S' trap including provision of lime concrete bedding including connections to flushing cistern/pipe and making good disturbed portion to match complete all as directed.
S&F Vitreous china ware wash down water closet pan (pedestal pattern) white including PVC seat cover with mild steel chromium plated or aluminised hinging device, fixing bolts jointing to flushing cistern and flush pipe anti syphonage pipe etc complete all as specified and directed
Demolition of cement concrete (unreinforced) in ground floors and pavings n.exc. 15cm thickness (below or above ground level) all as specified and as directed.
M&L for 75mm thick cement concrete type C1, 1:3:6 (using 40mm graded stone aggregate) in plinth protection, laid in bay n.exc. 3.00 sq.m each, finished even and smooth without using extra cement with and including all necessary form work to divide the area in panels, finishing exposed edges fair or rounding or chamfering where directed and providing 6mm wide joints throughout the thickness of plinth protection duly filled with mastic filling (one part of hot bitumen 85/25 and three parts of fine sand by weight) complete all as specified and directed.
S&F in repair vitreous china white flat back wash hand basin 550 x 400mm size including CP waste coupling, 32mm dia PVC waste pipe, CI/MS brackets including cutting for and pinning in brackets or fixed with brass screws all as directed.
S&F in repairs PVC valve less, syphonic action type, flushing cistern, 10 litres capacity, low level, white, with inlet, ball valve, float and handle, brackets complete including PVC connection and outlet pipe all as directed.
S&F in repairs Stop valves, 15mm bore, cast copper alloy, chromium plated, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed all as specified and as directed
S&F PVC connection 15mm size 450mm long with PTMT nuts on both sides.
S&F in repairs basin mixer cast copper alloy, chromium plated with central hole for WHB, fancy type 15mm bore complete all as directed.
S&F in repairs cast copper alloy, chromium plated hot and cold 15mm dia wall mixer 3-in-1 system with provision for both hand shower and overhead shower complete with 115mm long bend pipe, connecting legs & wall flange complete all as directed [excluding hand & overhead shower].
S&F in repairs Bib taps, 15mm bore, cast copper alloy, chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed all as specified and as directed.
S&F corner shelf, fancy type three tier with 5.50mm thick glass mounted on CP brass frame fixed with brass screw & plug, size not less than 450mm complete all as specified.
S&F in repairs brass chromium plated grating doom 100 mm dia complete all as directed.
S&F in repairs brass chromium plated Towel rail 'D' type, 600mm long complete all as specified and directed.
S&F in repairs brass chromium plated shower rose 125mm dia with swivel joint suitable for fixing to 15mm bore tube all as specified and as directed.
S&F in repair brass chromium plated Soap dish complete all as directed.
S&F in repairs 20mm bore gun metal globe or gate valve with iron wheel heads Class-II, screwed both ends for iron pipe all as specified.
Taking down cement plaster on brick or stone walls including raking out joints, hacking for key, scrubbing down with water etc. to receive plaster
M&L for rendering 15mm thick in CM (1:4) on brick or concrete surfaces finishing even and smooth without using extra cement complete including mixing water proofing compound all as specified. [Note: Supply only water proofing compound shall be measured and paid separately]
M&L for rendering 15mm thick in CM (1:6) on brick or concrete surfaces, finishing even and smooth without using extra cement complete all as specified.
Supply only liquid water proofing compound.
M&L for preparation of new plastered surfaces of walls & applying two coats of cement based paint all as specified and as directed.
M&L for preparation of new plastered surfaces of walls and applying three coats of white wash all as specified and as directed.
M&L for preparation of old decorated surfaces of walls and cornices by brooming down or steel wire brushing; scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots etc. and applying two coats of cement based paint complete all as specified and as directed.
M&L for complete removal of existing treatment from walls and applying two coats of oil bound distemper over a coat of alkali resistant primer over 1.5mm thick white cement based putty including sand papering the puttied surfaces to form an even and smooth surface all as specified and as directed
M&L for preparation of old decorated surfaces of walls and cornices by brooming down or steel wire brushing; scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots etc. and applying one coat of white wash complete all as specified and as directed.
Taking down chowkats or frames with shutters (with out taking off shutters from frames) n. exc. 1.5sq.m. each all as specified.
Taking down chowkats or frames with shutters (with out taking off shutters from frames) exc. 1.5sq.m. but n. exc. 4sq.m. each all as specified.
S&F factory made solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S square tube, supplying & fixing in opening as per specification & drawing shown on Sl. Page No. 180 of SSR Part-II-2020.
S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Paneling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, supplying & fixing in the frame at site as per specification & drawing shown on Sl. Page No. 176 of SSR Part-II-2020.
S&F second class hard wood as in plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints all as specified and as directed
S&F 35mm thick Second class hard wood plain, framed, paneled shutter (any number of panels), with panels of timber flat on both sides (feather edged), or of veneered particle board medium density, wood particle board with commercial face veneers: supplied and fitted to chowkats all as specified and as directed.
M&L for 35mm thick 2nd class hard wood glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (with sash bars) edges of framing plain, chamfered or rounded, fitted with cut mitred beads for securing glass, etc size of members as specified in SSR Pt-I, section 8 clause 8.24 (a) complete all as directed.
M&L for 30mm thick 2nd class hard wood glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars) edges of framing plain, chamfered or rounded, fitted with cut mitred beads for securing glass, etc size of members as specified in SSR Pt-I, section 8 clause 8.24 (b) complete all as directed.
S&F 300mm long Mild steel sliding door bolts, plate type, stove enameled black, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate and fixed
S&F 100mm long cold rolled MS butt hinges medium weight.
S&F extruded aluminium handle 125mm long fabricated type anodized all as specified.
S&F 150mm long aluminium anodized barrel tower bolts of extruded section.
S&F 300mm ordinary rat tail rod pattern springs including roller and roller plate complete
M&L for preparation of new wood and wood based surfaces of any description not other wise described over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer all as specified
M&L for preparation of old painted wooden surfaces over 10cm in width or girth and applying two coats of synthetic enamel paint complete all as specified.
M&L for preparation of new or previously untreated steel/ iron surfaces of any description exceeding 10 cm in width or girth and applying two coats of synthetic enamel paint over a coat of zinc chrome primer complete all as specified and as directed.
M&L for treating small article such as hold fast etc area n.exc 0.1 sq.m each with tar or coal tar black paint complete all as specified and as directed.
S&F Floor door stopper of brass body and tongue with hard drawn steel spring, fixed in floor with overall length of cover plate 150mm all as specified and as directed
S&F stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples
S&F 4mm thick sheet glass, ordinary quality and glazing with oil putty/ glazing clips/ wooden beads in any size all as specified and as directed.
S&F 3mm thick figured glass, pin headed type and glazing with oil putty/ glazing clips in any size all as specified and as directed.
Hacking out old broken glass (any thickness, size, quality or description) from wooden/ steel/ aluminium frames glazed with putty or fixed with beads
Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises.
M&L for 25mm thick cement concrete PCC 1:2:4 type B0 using 12.5mm graded aggregate as in sub base for flooring all as specified
M&L for glazed digitally printed ceramic tiles of size 300x450mm, 6 to 7mm thick in vertical surfaces of wall, set and jointed in neat cement slurry and pointed in coloured cement to match laid over and including 10mm thick backing coat in CM 1:4 complete all as specified.
M&L for non skid coloured ceramic joint free tiles 7 to 8mm thick (square/ rectangular) area of each tile exc. 0.11sq.m but n.exc. 0.18sq.m, in floors etc., set and jointed in neat cement slurry and pointed in coloured cement to match laid over and including 15mm thick screed bed in CM (1:6) complete all as specified.
M&L for non skid coloured ceramic joint free tiles 7 to 8mm thick (square/ rectangular) area of each tile exc. 0.18sq.m but n.exc. 0.36sq.m, in floors etc., set and jointed in neat cement slurry and pointed in coloured cement to match laid over and including 15mm thick screed bed in CM (1:6) complete all as specified.
S&F fancy type PVC coated mild steel powder coated 25mm dia medium grade curtain rods including suitable brackets complete all as specified and as directed by Engineer-in-Charge.
Demolition of stone slabs and tiles of any description or thickness in floors, aprons etc. laid, bedded and pointed in any mortar all as specified.
M&L for machine cut Kota stone slab flooring 20-25mm thick over and including 20mm thick cement screed base in CM 1:4, laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and as directed.
Dismantling plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings all as directed.
S&F Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws complete all as specified and as directed.
Dismantling timber fillets, rails, posts, rafters, purlins, etc. 40 sq.cm and over in section, in any position, unframed work complete all as specified
M&L for 2nd class hardwood in scantlings, clean sawn, timber framed and fixed as in roof truss including fixed in position complete all as specified and as directed.
M&L for 2nd class hardwood in scantlings, clean sawn, timber fixed (un framed work) as in purlins, rafters etc including fixed in position complete all as specified and as directed.
Dismantling wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/ slabs/ blankets, any thickness, including cover fillets and frame work.
M&L for anodized aluminium snap grid frame work of size 605mm x 605mm for false ceiling suspended with 6mm dia G.I. hangers (up to 1200mm length) adjusting level fixed to roof slabs by means of ceiling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long including 12mm thick perforated particle board complete including applying two coats of synthetic enamel paint over a coat of pink primer on soffit of ceiling boards all as specified.
Dismantling wrought iron or mild steel work of any description not otherwise provided for all as specified.
M&L for Collapsible steel gates, top hung, consisting of channel pickets, pivoted flat bars, top and bottom runners, brass handles etc., as specified, erected in position and securing runners with holdfasts and brackets, complete all as specified.
M&L for mild steel framed work such as grills, gratings, etc. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290, Gde-E-165 all as specified and as directed.
Taking down carefully aluminium/ copper point wiring for light, fan, socket or power point etc. complete with all fittings and fixtures such as switch piano, ceiling rose, switch socket, pendants etc including making good surface of wall, ceiling etc complete all as specified.
Taking down carefully existing sub-main wiring of any description complete all as specified.
Taking down distribution board of any type including cutout, MCBs etc. complete all as specified and as directed.
M&L for Point wiring complete as specified with 1100 volt grade 1.5sq.mm. (nominal area) single core PVC insulated unsheathed cable with multi-stranded copper conductor of FR-LSH grade (IS:694) drawn through and including rigid non-metallic PVC conduit of suitable size not less than 20mm dia, with all fittings, concealed in wall/ roof / floor including pressed steel concealed terminal boxes of required size with top cover of 3 mm thick of plastic laminated sheet of required colour suitable for housing switches/ sockets/ regulators etc. duly earthed with same cable as for wiring above but green in colour as continuous earthing wire complete all as specified for one light/ fan/ bell point controlled by one switch 6 Amps 1 way. [Note:- M&L for cutting chases for concealed conduit wiring on any surfaces and making good disturbed surfaces to match with the existing surfaces in cement mortar 1:3 and finishing with existing finishes shall be deemed to be included in the quoted rate.]
All as per Item No. 90 herein before but for one 3 pin 6 Amp socket out let point on independent board.
All as per Item No. 90 herein before but for one 3 pin 6 Amp socket out let point on same board with other switches.
All as per item No. 90 herein before but point wiring with 1100 volt grade 2.5sq.mm. (nominal area) single core PVC insulated unsheathed cable with multi-stranded copper conductor of FR-LSH grade (IS:694) duly earthed with same cable as for wiring above but green in colour as continuous earthing wire suitable for one 3 pin 16 Amps socket out let on independent board.
M&L for taking down existing ceiling/ exhaust fan from its location and keeping in safe custody till completion of repairs to the building and re-hanging/ fixing back the ceiling/ exhaust fan duly painted with synthetic enamel paint by spraying including filling cavities with filler after cleaning of dust etc. and servicing complete, connecting up including provision of cable from ceiling rose to connector of fan complete all as directed.
Taking down old serviceable LED tube light/ bulk head light fitting of any type, keeping in safe custody during repairs to building and refixing the same including provision of PVC insulated, sheathed round flexible wire with multi stranded copper conductor of size 0.75 sq.mm, 3 core, 1100 Volts grade, from light fitting to ceiling rose complete all as specified and directed.
S&F wall/ surface mounted type LED light fitting 1 X 20 watt (4' long) with extruded aluminum batten with multiple lumen packages complete with all accessories internally pre-wired and including making electric connection with flexible three core 1.50 sq.mm size stranded copper conductor cable from light fitting to ceiling rose complete all as specified and directed. [Cat. Part No. BN021C LED22S PSU CW GR (SmartBright) of make: Philips or Cat No. ENDURALINEARNEOBS20WLED 865SPCWH of make: Havells/ Cat No. CCS-100-20-65-HL2-DP-NWH of make: CG/ Cat No. LL20-221-XXX-65NE3 of make: Wipro]
S&F wall/ surface mounted type LED light fitting 1 X 9 to 12 watt (2' long) with extruded aluminum batten with multiple lumen packages complete with all accessories internally pre-wired and including making electric connection with flexible three core 1.50 sq.mm size stranded copper conductor cable from light fitting to ceiling rose complete all as specified and directed. [Cat. Part No. BN 021 LED12S 6500 PSU GR (SmartBright) of make: Philips or Cat No. ENDURALINEARNEOBS10WLED 865SPCWH of make: Havells/ Cat No. LL20-111-XXX-65NE3 of make: Wipro]
S&F wall/ surface mounted type LED light fitting 5 watt (1' long) polycarbonate with multiple lumen packages complete with all accessories internally pre-wired and including making electric connection with flexible twine core 1.50 sq.mm size stranded copper conductor cable from light fitting to ceiling rose complete all as specified and directed. Make: Philips /Havells / CG/ Bajaj
S&F Exhaust fan 300mm sweep, single phase 230V, AC metal body 900 RPM with louvers including electric connection from ceiling rose to fan connector with PVC insulated 3 core copper cable of size 0.75 sq.mm complete including taking down existing exhaust fan and handing over to AGE E/M Store all as directed. [Make: Model No. 'Ventil Air - DB' of make: Havells or equivalent in Almonard/ Bajaj/ Crompton]
S&F LED Street Light/ building security light fittings having Ingress Protection class minimum IP-65 , suitable for road lighting luminaire with high power LED and maintenance free system for capacity 35 W complete with and including 32 mm bore light grade GI pipe bracket (1.5m long) duly bent to shape including 2 Nos MS flat iron (25mmx5mm) clamps, nuts, bolts, washers etc. complete all as specified and as directed. [Make: Philips Cat Part No : BRP030 LED35 CW MR PSU GR DX/ Havells Cat Part No: ENDURACITYLITE PLATPLUS SL35W LED 757SASYBOPC/ Wipro Cat Part No : LR02-391-XXX-57-XX]
S&F switch piano, flush type SP, one way 5/6 Amps, 230V AC
S&F switch piano, flush type, SP, one way, 15/ 16 Amps, 250 V, ISI marked.
S&F socket outlet 6 Amp, 2 in 1, 5 pin, 230V AC
S&F socket outlet 6/16 Amp, 2 in 1, 6 pin, 230 V AC
S&F ceiling rose PVC/ Poly carbonate isolated body, three terminal complete all as specified.
S&F electronic fan speed regulator, suitable for single phase AC 240 volts, 50 Hz, 100 watts complete all as specified and as directed by Engineer-in-Charge.
S&F in repairs single pole and neutral enclosure with two pin and earth plug and socket with one single pole MCB 20 Amps 240 Volts complete all as directed.
S&F sheet steel powder coated distribution board SPN 8 ways, 240 volts, with 200 Amps rated bus bar, neutral link, earth bar, IP 43 protection and double door, IK-09 with metal door suitable for mounting MCBs all as specified and as directed.
S&F sheet steel powder coated distribution board TPN 4 ways, 415 volts, with 200 Amps rated bus bar, neutral link, earth bar, IP 43 protection and double door, IK-09 with metal door suitable for mounting MCBs all as specified and as directed.
S&F MCB TPN, 415 volts, 40 to 63 Amps, C curve 10 KA all as specified and as directed.
S&F MCB SPN, 240 volts, 40 to 63 Amps, C curve 10 KA all as specified and as directed.
S&F MCB SP, 6 to 32 Amps, 230 V, C curve, 10 KA all as specified and as directed.
S&F MCCB 63 Amp, 415 volts, 4 pole, Thermal magnetic release for line protection etc complete all as specified and directed.
M&L for Angle Holder, insulated body with back plate with & including LED Lamp 7 Watt suitable for batten fittings complete all as specified and directed by Engr-in-Charge.
M&L for sub main wiring concealed complete with two runs of 1100 Volts grade 4 sq.mm (nominal area) single core PVC insulated unsheathed cable with multi-stranded copper conductor of FR-LSH grade drawn through and including 25mm dia non metallic rigid PVC conduit and conduit accessories concealed in walls/ roofs/ floors etc. with one run of 1100 Volts grade 4 sq.mm (nominal area) single core PVC insulated unsheathed cable with multi-stranded copper conductor of FR-LSH grade as earth continuity conductor all as specified. [Note:- M&L for cutting chases for concealed conduit wiring on any surfaces and making good disturbed surfaces to match with the existing surfaces in cement mortar 1:3 and finishing with existing finishes shall be deemed to be included in the quoted rate.]
M&L for sub main wiring concealed complete with two runs of 1100 Volts grade 6 sq.mm (nominal area) single core PVC insulated unsheathed cable with multi-stranded copper conductor of FR-LSH grade drawn through and including 25mm dia non metallic rigid PVC conduit and conduit accessories concealed in walls/ roofs/ floors etc. with one run of 1100 Volts grade 6 sq.mm (nominal area) single core PVC insulated unsheathed cable with multi-stranded copper conductor of FR-LSH grade as earth continuity conductor all as specified. [Note:- M&L for cutting chases for concealed conduit wiring on any surfaces and making good disturbed surfaces to match with the existing surfaces in cement mortar 1:3 and finishing with existing finishes shall be deemed to be included in the quoted rate.]
Taking down unserviceable water heater and S&F electric water heater (geyser), storage type steel body with glass tinted inner tank and heating element up to 2 KW capacity 25 litre, BEE 5 Star rated complete with all accessories such as safety valve, thermostat, NRV, connection piece etc & electric supply connection complete over and including grouting nuts & bolts of 15 mm dia 100 mm long for hanging the geysers, including PVC connection pipe 15mm dia, 450mm long heavy duty suitable for hot & cold water connections complete and plastering and finishing of plastered surface of wall as per existing finish complete all as specified and as directed. Note :- Unserviceable water heater shall be deposited in MES Store yard. Make: AO Smith Model No AO Smith ELJ Series Storage Water Heater ELIV 25 Litre Vertical Type, Havells Model No Monza dx Vertical Type, Racold Model No Racold Platinum Plus Vertical Type.
Excavating manually in trenches n. exc. 1.5m wide and n. exc. 1.5m in depth for foundation etc. or for shafts, wells, cesspits, manholes, pier holes etc. n. exc. 10sq.m. on plan and n. exc. 1.5m in depth and getting out in soft/ loose soil.
Returning, filling in including spreading leveling watering and well ramming in layers not exc. 25cm in any type of soil.
Removing excavated materials to a distance not exc. 50m and depositing where directed at a level n.exc 1.50m above the starting point.
Supply and spread river sand as in cushioning for UG cable all as specified in clause 19.75 of SSR Part I. [Note: Punned down thickness shall be considered for payment]
M&L for well burnt Sub class 'B', modular bricks laid dry, flat, over the cable abutting each other, complete all as specified and directed.
Making horizontal bore hole under the road suitable for drawing up to 50mm bore pipe at a depth not less than 1 Mtr below ground level for passing of LT underground cable complete all as specified and as directed.
Supply and laying GI pipe of 50mm bore dia light grade for cable protection, laid in trenches for drawing cables complete all as specified and as directed.
Supply, lay, connect, test and commissioning of LT XLPE insulated, screened, PVC bedded, galvanized steel strip or wire armoured electric power cables (heavy duty) with aluminium conductor 1100 volts grade of size 3½ Core 35 Sq.mm complete including taking up existing unserviceable cable all as specified and directed. Note: (i) Necessary test results like continuity test, megger tests shall be submitted to Engineer-in-Charge before the cable is laid. (ii) Excavation & earth work will be measured and paid separately.
M&L for Earthing complete with galvanized steel earth plate electrode 60cm x 60cm x 6mm thick, buried directly in ground (earth pit not less than 2.25m deep below ground level) with top edge of earth plate not less than 1.5m below normal ground level, connected to 4mm dia GI earth continuity wire by means of bolts, nuts, check nuts and washers of galvanized iron or steel and connected from earth plate electrode to main switch board/ earthing test point including watering arrangement with PCC 1:3:6 type C1 chamber, MS funnel, wire gauge, 50mm thick precast RCC cover in Type B1, including necessary excavation in any type of soil, returning, filling in, removal of surplus soil to a distance n.exc 50m, charcoal and salt complete all as shown in electrical plate No. 3 of Schedule Part-I 2009 and connected to earthing test point all as specified or indicated and testing on completion.
Deduct: Amount of Schedule of Credit b/f from Sl. Page No. 17 of tender document i.e. Rs. 91,885.00
M/S Quality Constructions
M/s M Aali construction co
S.K.Enterprises
Shikhar ji Enterprises
M/s Agarwal Builders
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .