Loading
Loading…
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹19.5 LAccepted-AOC | L1 | Accepted-AOC Bidder being L1 | |
| 2 | L2₹20.8 L+₹81,095 (4.07%)Rejected-AOC | L2 | Rejected-AOC Bidder other than L1 | |
| 3 | L3₹24.0 L+₹4.0 L (20.1%)Rejected-AOC | L3 | Rejected-AOC Bidder other than L1 | |
| 4 | L4₹28.4 L+₹8.5 L (42.5%)Rejected-AOC | L4 | Rejected-AOC Bidder other than L1 | |
| 5 | L5₹29.5 L+₹9.6 L (48.0%)Rejected-AOC | L5 | Rejected-AOC Bidder other than L1 |
| Sl No | Description | Qty | Unit | SAI RAM CONSTRUCTIONS L5 | Sadh builders L2 | Sri Sai Krishna Construction L3 | S J REDDY L4 | Deepika Enterprises L1 |
|---|---|---|---|---|---|---|---|---|
| 1.00 | M & L for preparing old plastered or unplastered surfaces on walls including cornices and applying one coat of white wash all as specified and directed by Engineer-in-Charge. | 500 | Sqm | 18 ₹9,000 | 11 ₹5,500 | 8 ₹4,000 Lowest | 18 ₹9,000 | 10 ₹5,000 |
| 2.00 | M & L for preparing old plastered or unplastered surfaces on ceilings including cornices and applying one coat of white wash all as specified and directed by Engineer-in-Charge. | 1,000 | Sqm | 20 ₹20,000 | 16 ₹16,000 | 9 ₹9,000 | 18 ₹18,000 | 5 ₹5,000 Lowest |
| 3.00 | M & L for preparing old plastered or unplastered surfaces of walls including cornices and applying one coat of distemper oil emulsion all as specified and directed by Engineer-in-Charge. | 3,500 | Sqm | 30 ₹1,05,000 | 40 ₹1,40,000 | 35 ₹1,22,500 | 72 ₹2,52,000 | 28 ₹98,000 Lowest |
| 4.00 | M&L for complete removal of existing treatment of any description and applying 3 mm thick wall care putty and rubbing with sand paper to achieve a level and smooth to wall and applying two coats of distemper oil emulsion over a coat of primer complete all as specified and as directed. | 200 | Sqm | 100 ₹20,000 | 90 ₹18,000 | 120 ₹24,000 | 90 ₹18,000 | 30 ₹6,000 Lowest |
| 5.00 | M & L for preparing old painted wood and wood based surfaces of any description, not otherwise described over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed by Engr -in- charge. | 500 | Sqm | 40 ₹20,000 | 70 ₹35,000 | 45 ₹22,500 | 90 ₹45,000 | 25 ₹12,500 Lowest |
| 6.00 | M & L for preparing old painted steel and iron surfaces of any description, not otherwise described over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed by Engr -in- charge. | 350 | Sqm | 40 ₹14,000 | 60 ₹21,000 | 60 ₹21,000 | 81 ₹28,350 | 20 ₹7,000 Lowest |
| 7.00 | Demolition of Brickwork or stone / boulder / PCC block masonry, built in cement mortar including all quoins, arches, pillars, etc., but excluding ashlar facings, dressed stone-work and precast concrete articles etc complete all as specified and as directed. | 3 | Cum | 200 ₹600 Lowest | 500 ₹1,500 | 700 ₹2,100 | 540 ₹1,620 | 300 ₹900 |
| 8.00 | Taking down cement plaster in wall/ceilling surfaces on brick or stone walls etc including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and as directed. | 45 | Sqm | 20 ₹900 | 60 ₹2,700 | 55 ₹2,475 | 27 ₹1,215 | 10 ₹450 Lowest |
| 9.00 | M&L for pre-cast cement concrete block masonry of type C1 1:3:6 (using 20mm graded stone aggregate) with solid blocks exc 10cm in width and setting in cement mortar 1:4 etc complete all as specified and as directed. | 3 | Cum | 6,000 ₹18,000 | 8,000 ₹24,000 | 6,000 ₹18,000 | 9,000 ₹27,000 | 3,000 ₹9,000 Lowest |
| 10.00 | M&L for plastering in internal wall surfaces of 15mm thick in CM 1:6 on fair faces of brick work or concrete surfaces finished even and smooth (without using extra cement) complete all as specified and directed by Engr -in- charge. | 75 | Sqm | 300 ₹22,500 | 300 ₹22,500 | 270 ₹20,250 | 225 ₹16,875 | 100 ₹7,500 Lowest |
Tender Value
₹32 L
EMD Value
₹64,000
Closing Date
4 Jul 2025, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE (AFA) HYDERABAD
GE (AFA) Hyderabad, Dundigal, Hyderabad
COMPREHENSIVE MAINT AND WELCOME MAIN TO CERTAIN MD OFFICERS ACCN, SMQ AREA OFFICERS MESS AND OTHER BLDGS OF DOMESTIC AREA AT AFA HYDERABAD
2025_MES_712827_1
8567/E8
Open Tender
Civil Works
Item Rate
330 days
HYDERABAD
Please refer Tender documents.
5 documents required · 5 mandatory
₹500
GE (AFA) HYDERABAD
₹64,000
Yes
22 Feb 2026
6 Jun 2025
5 Jul 2025
6 Jun 2025
4 Jul 2025
19 Jun 2025
6 Jun 2025 - 19 Jun 2025
Amount
M & L for preparing old plastered or unplastered surfaces on walls including cornices and applying one coat of white wash all as specified and directed by Engineer-in-Charge.
M & L for preparing old plastered or unplastered surfaces on ceilings including cornices and applying one coat of white wash all as specified and directed by Engineer-in-Charge.
M & L for preparing old plastered or unplastered surfaces of walls including cornices and applying one coat of distemper oil emulsion all as specified and directed by Engineer-in-Charge.
M&L for complete removal of existing treatment of any description and applying 3 mm thick wall care putty and rubbing with sand paper to achieve a level and smooth to wall and applying two coats of distemper oil emulsion over a coat of primer complete all as specified and as directed.
M & L for preparing old painted wood and wood based surfaces of any description, not otherwise described over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed by Engr -in- charge.
M & L for preparing old painted steel and iron surfaces of any description, not otherwise described over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed by Engr -in- charge.
Demolition of Brickwork or stone / boulder / PCC block masonry, built in cement mortar including all quoins, arches, pillars, etc., but excluding ashlar facings, dressed stone-work and precast concrete articles etc complete all as specified and as directed.
Taking down cement plaster in wall/ceilling surfaces on brick or stone walls etc including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and as directed.
M&L for pre-cast cement concrete block masonry of type C1 1:3:6 (using 20mm graded stone aggregate) with solid blocks exc 10cm in width and setting in cement mortar 1:4 etc complete all as specified and as directed.
M&L for plastering in internal wall surfaces of 15mm thick in CM 1:6 on fair faces of brick work or concrete surfaces finished even and smooth (without using extra cement) complete all as specified and directed by Engr -in- charge.
M & L for two coats of oil bound distemper on newly plastered surface of walls over a coat of alkali resistant primer including preparation of surfaces complete all as specified and directed by Engr -in- charge.
Taking down shutter of any description exc 1 Sqm and n.exc 2 sqm each complete all as specified and as directed
Taking down shutter of any description n exc 1 Sqm each complete all as specified and as directed
Taking down Chowkhats or frames with shutters (wihout taking off shutters) from the frame exc 1.5 sq. m but n exc 4 sq. m complete all as specified and as directed
Taking down Chowkhats or frames with shutters (wihout taking off shutters) from the frame n.exc 1.5 sq. m complete all as specified and as directed
Taking down shutters of any description exc 1 sqm and n exc 2 sqm and refixing in the same opening after necessary easing & adjusting/resizing complete all as specified.
Providing and fixing factory made uPVG white colour Sliding window Three track made of extruded profiles with wall thickness of 2.3mm (+ -0.2mm). Window profile with hollow section with multi chamber. Frame (88mm x 52mm), sliding sash (42mm x 67mm). Sliding mesh Sash (42mm x 57mm) Sliding interlock (One vertical length in each shutters) (45.5mm x 28mm), Glazing bead (24.5mm x 16mm) will be miterd cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware. EPDM gasket, 1.2+ -0.2mm thick galvanised steel Frame (30mm x 18mm) 2 nos, sliding sash (30mm x18mm), sliding mesh sash (26mm x 10mm) profile to be inserted in required profile, frame will be fixed to the wall with 8mm x 100mm long fasteners, Hardware [Touch Lock of zinc alloyed (white powder coated), steel roller system. Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture1.40mm and required accessories (Note: The unit rate quoted by contractor excludes cost of glass and includes all other connected accessories. Net Opening will be measured for payment purpose.) Area not exceeding 2.00 sqm each complete all as specified and directed.
Providing and fixing Powder coated aluminium (minimum thickness of powder coating 50 micron) work for doors, windows, ventilators and partitions (Fixed portions) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ panelling, C.P.brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-Charge.
S & F Powder coated aluminium (minimum thickness of powder coating 50 micron) for type of shutters(hung/sliding) of doors, windows, ventilators, including providing and fixing hinges / pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately) with extruded built up standard tubular sections / appropriate Z sections and other sections of approved make conforming to IS- 733 and IS- 1285, with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom ad sides with required EPDM rubber / neoprene gasket etc. Aluminium section shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, aluminium snap beading for glazing / panelling, CP brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge.
S&F Powder coated (Thickness not less than 50micron) Aluminium anodised Grill, aperture n exc 75 mm ,size 6mm x 4mm thick, including 1 mm thick channel fixed with steel screws complete all as specified and directed.
S&F factory made solid PVC door frame of size 50x47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube complete all as specified and as directed
S&F factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement etc complete.
S&F pressed steel frames (size 105x60mm) for doors with one or more rebates incl necessary fixings lugs, hinges, lock strike plate etc complete all as specified and as directed.
S&F pressed steel frames (size 125x60mm) for doors with one or more rebates incl necessary fixings lugs, hinges, lock strike plate etc complete all as specified and as directed.
M&L for providing plain cement concrete 1:3:6 Type C-0 (using 12.5mm graded stone aggregate) as in filling hollow of pressed steel frame.
S & F 35 mm thick second class hard wood, Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and directed.
S& F 35mm thick glazed and Skelton shutters, open rebated with sash bars, divided in to squares, prepared to receive glass/ gauze etc. edges of framing plain, chamfered or rounded, fitted with cut mitered beads for securing glass/ gauze. Note: glazing/ gauzing will be measured separately
S&F aluminium(extruded section body) door closer hydraulically regulated designation No. 3, universal type suitsble for door shutter of 851 to 1000mm in width and of weight between 61to 80 Kg all as specified. MAKE : Godrej or Equivalent.
S&F in repairs aluminium(extruded section body) door closer hydraulically regulated designation No. 3, universal type suitsble for door shutter of 851 to 1000mm in width and of weight between 61to 80 Kg all as specified. MAKE : Godrej or Equivalent.
S&F in repairs double action floor door spring hydraulically regulated made of minimum 1.25mm thick aluminium alloy sheet foundation box main body of stainless steel cover, governing pivot made of brass, other parts amde of mild steel heavy duty and fixed for aluminium door all as specified.
S&F of brass 4 Levers Mortice lock, vertical type, size 100mm
S&F 300 mm long aluminium alloy, sliding door bolt with hasp & staple (bolt type) and fixing clips of sheet cast or extruded section and fixing bolts and sliding bolts all as specified.
S&F for aluminium anodized barrel tower bolts 200 mm of extruded section and fixed.
S&F 150 mm size aluminium alloy handles, febricated type extruded section, ISI marked all as specified.
S&F of butt hinges, medium weight, cold rolled mild steel of 100 mm long.
Cutting holes in brick work built in cement mortar for inserting hold fast and making good dismantled portion in CM 1:3 depth of cutting exc half brick but n. exc one brick all as specified
M & L for MS flat for hold fast. Conforming to Fe-290 Gde E-165
S&F 300 mm long mild steel ordinary rat tail rod pattern springs including roller & roller plate and complete all as specified.
S&F 150 mm long floor door stopper of aluminium door stopper of aluminium alloy body and tongue, anodised with hard drawn steel spring all as specified
Hacking out old broken glass (any thickness, size, quality or description) from wooden/steel frame, glazed with putty complete all as specified and as directed.
S&F sheet glass 3 mm thick, ordinary quality and glazing with oil putty in square n. exc 0.5 Sqm in each pane complete all as specified and as directed.
S&F frosted or ground/obscured type sheet glass, 3mm thick and glazing with oil putty in squares n.exc 0.5 Sqm in each pane complete all as specified and as directed
S&F stainless steel wire cloth, 0.36 mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples all as specified.
S&F in repair stainless steel wire cloth, 0.36 mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples all as specified.
M&L for preparation of new or previously untreated surface of wood or wood based materials of any description over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer all as specified.
S & F framed work such as grills, gratings etc with ends of bars shouldered and/or riveted or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar works confirming to Fe-290. Gde-E-165 complete all as specified and directed.
M&L preparation of new steel surface of any description over 10cm width or girth and applying two coats of synthetic enamel paint over one coat of red oxide/zinc chrome primer complete all as specified and as directed.
Dismantling boarding of any description, fixed in any position fixed with nails
M&L block boards 18/19mm thick, grade 2 quality, interior grade, fixed with screws to timber frame work all as specified.
M&L block boards 12 mm thick, grade 2 quality, interior grade, fixed with screws to timber frame work all as specified.
M&L for 0.9 mm thick Decorative laminated sheet type 1 of surface finish coloured and pattern as approved and fixed over plywood with approved adhesive all as specified.
S&F of 100mm brass Hasp and staple, safty type, with hinge pin including bolt to hinge plate and fixed with screws etc complete all as specified and as directed.
M&L in repair 2nd class hardwood Plain fillets (50x50) Exc 13 & n.exc 25 Sq.cm, square, rectangular or triangular in section, clean sawn, secured with screws or nails or brads complete all as specified and directed.
S & F of 40 mm dia. cup boards knobs fixed with nut , screw and washer of mild steel , bright finished
S & F of Stainless steel butt hinges 75 mm long wih screw
M&L 18mm thick Marine plywood of First Grade (A) , fixed with screws as in cupboards, sides of shelves, partitions and in similar works, etc all as specified and as directed..
M&L 12mm thick Marine plywood of First Grade , fixed with screws as in cupboards, sides of shelves, partitions and in similar works, etc all as specified and as directed..
M&L for 0.9 mm thick Decorative laminated sheet type 1 of surface finish coloured and pattern as approved and fixed over plywood with approved adhesive all as specified.
S&F Stainless steel wire (6mm) modular kitchen basket set (6 trolley) with corrosion resistance, durable and seamless glossy finish used in modular kitchen cabinets & drawers. Make: Steel gold or equivalent approved by GE. Set Content:- a) 21"x20"x4" (Perforated Cutlery) - 1nos b) 21"x20"x4" (Saucer basket) - 1 nos c) 21"x20"x4" (plain/cutlery Basket) - 1 nos d) 21"x20"x6" (plain/cutlery Basket) - 2 nos d) 21"x20"x8" ( Perforated cutlery) - 2 nos e) 21"x20"x8" (modern Thali Basket) - 2 nos f) 20" Telescopic Channel (Heavy) - 9 Sets
S&F Auto concealed Cabinet Hinges, full overlay of size 103 x 64mm etc all as specified and as directed.
S&F Fancy 'D' Type Drawer / Cabinet handles of Size 100mm, etc all as specified and as directed.
S&F Magnetic catcher with plate, glosy finish for Drawer / Cabinet of Size not less than 50mm, etc all as specified and as directed.
S&F in repairs 25mm thick curtain rod stainless steel fancy type complete all as specified and as directed
S&F in repairs fancy type brackets with knobs suitable for 25mm dia stainless steel curtain rod including stay & side clamp as reqd at site complete all as specified and as directed
S&F in repairs Door seal (Snake guard) with Aluminium frame complete all specified
S&F in repairs Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60 cm long complete all as specified and directed by Engr -in- charge.
S&F in repairs glass corner/ mirror shelves size 300/450 mm of each fixed with necessary screws, bolts , and supporting L type angles with drilling in walls complete all as specified and directed by Engr -in- charge.
S&F in repairs PVC Cabinet of size 600mm x450mm with necessary fittings and hinges complete all as specified and directed by Engr -in- charge.
Dismantling floor, heath or wall tiling including cement sand mortar bedding and removing rubbish of the premises complete all as specified and directed by Engr -in- charge.
S&F of Non-skid coloured ceramic tiles 7 to 8 mm thick (square / rectangular) area of each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match etc including Screed bed or bedding in layer of mortar 15 mm thick for laying floor finishes in cement plaster 1:4, complete all as specified and directed by Engr -in- charge. complete all as specified and as directed.
M&L Dark shade/Double charged Vitrified Ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and ointed in neat cement slurry and pointed in white or coloured cement to match, including screed bed or bedding in layer of mortar 15 mm thick for laying floor finishes in cement plaster 1:4, complete all as specified and directed by Engr -in- charge. complete all as specified and directed by Engr -in- charge.
M&L for glazed ceramic tiles coloured of size 350 x 250 x 7 mm / 450 X 350 X 7 mm thick as on walls over jointing in neet slurry and pointing in coloured cement to match the inside of tiles including 10mm thick rendering in cement mortar (1:4) complete all as specified and directed by Engr -in- charge.
Demolition of reinforced cement concrete chimneys, roofs, floors (other than ground floors), beams, staircases, landing, chajjas and similar suspended work (reinforcement cut as required to facilitate demolition) complete all as specified and directed.
M&L for pre-cast reinforced cement concrete 1:2:4, type B1 (using 20 mm graded stone aggregate), as in kitchen platform and selfs in kitchen slabs, etc including necessary form work , complete all as specified and as directed. Set in CM 1:6
M&L for MS TMT bars 8 to 10 mm dia cut to length bent to shape required including cranking, bending, spirally for hooping for columns, hooking ends and binding with and including MS wire (annealed) not less than 0.90 mm dia complete all as specified and as directed.
Dismantling of stone slabs and tiles of any description or thickness as on platform, shelves, floors etc laid, bedded and pointed in any mortar .
M&L for Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like over 20 mm thick screed bed or bedding layer in cement mortar (1:6), including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and as directed.
M&L for rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations complete all as specified and as directed.
Sadh builders (BID ID -3347235)
Sri Sai Krishna Construction (BID ID -3346949)
S J REDDY (BID ID -3339088)
SAI RAM CONSTRUCTIONS (BID ID -3330879)
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .