Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹21.2 LAccepted-AOC 231 JAGGI GARDEN BALDEV NAGAR AMBALA CITY 134003 | AMBALA CITY | AMBALA | HARYANA | 134003 | L1 | Accepted-AOC Being Lowest | |
| 2 | L2₹22.9 L+₹1.0 L (4.74%)Rejected-Finance | L2 | Rejected-Finance Other Than Lowest Bidder | |
| 3 | L3₹26.4 L+₹4.6 L (20.9%)Rejected-Finance | L3 | Rejected-Finance Other Than Lowest Bidder |
Tender Value
₹28 L
EMD Value
₹56,000
Closing Date
26 Jun 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE Chandigarh
GE Chandigarh N Area Pin-160003
REPAIRS TO PERISHED/WORN-OUT JOINERY, CUPBOARDS, KITCHEN SHELVES IN MD ACCN AT MIL STN NAHAN UNDER GE CHANDIGARH
2023_MES_598070_1
GE/CHD-33/2023-24
Open Tender
Civil Works
Item Rate
270 days
Nahan Under GE Chandigarh
Class D category a(i) for contractor enlisted in MES
7 documents required · 7 mandatory
₹500
GE Chandigarh
₹56,000
Yes
25 Jul 2023
24 May 2023
28 Jun 2023
24 May 2023
26 Jun 2023
14 Jun 2023
24 May 2023 - 4 Jun 2023
Amount
Taking down chowkhats or frames with shutters (without taking off shutters from the frames) of size not exceeding 1.50 Sqm each and making good the distrubed surfaces complete in cement mortar all as specified.
Taking down chowkhats or frames with shutters (without taking off shutters from the frames) of size exceeding 1.50 Sqm but n. exc 4.0sqm eachand making good the distrubed surfaces complete in cement mortar all as specified.
Taking down shutters of any description, area exc 1 sqm and not exc 2.00sqm each complete all as specified.
Re-securing or easing and adjusting of shutters of any description exceeding 1 sqm but not exc 2 Sqm each complete all as specified.
S&F Continuous (piano) hinges 30 mm wide , mild steel, bright finish or electrogalvanised complete all as specified.
S&F 4 mm thick , sheet glass ordinary quality and glazing with oil putty or wooden beads in squares not exceeding 0.5 sqm in aluminium frame work in squares/rectangles in each pane complete all as speciifed and directed.
S&F 8mm sheet glass ordinary quality and glazing with oil putty or using SS tuks / pins as in aluminium/wooden frame work in squares/rectangles as required in squares n exc 0.5sq. m in each pane complete all as specified and as directed.
S&F in repairs 4mm thick figured glass, pin head type and glazing with oil putty in squares n exc 0.5 sqmm each pane complete all as specified.
Hacking out old broken glass (any thickness, size, quality or description) from wooden/steel frames, glazed with putty or fixed with beads complete all as specified.
S&F in repair 17-18mm thick HDHMR board high density, water, termite, boer and fungus resistant, laminated both sides fixed with screws to timber frame work as in cupboard shelves, shutters, , kitchen cabinets including beading strip on edges as required etc complete all as specified and as directed by Engr-in-Charge.
S&F in repair 18-19mm thick particle board, interior grade pre-laminated one side with decorative choice lamination and other side balancing white lamination fixed with screws to timber/aluminium frame work including beading strip on edges as required complete all as specified and as directed
S & F in repair 18-19mm thick plywood BWR type BB, fixed with screws to timber frame work including beading strip on edges as required as in cabinets etc, complete all as specified and as directed
S&F in repair 1.00 mm thick sunmica to be fixed with adhesive with plywood surfaces and wooden surfaces,Complete as per direcrtion of Engineer-In- Charge.
S&F in repair SS 304 cutlery trays of size 370x485x100mm and 0.6mm thickness 4 modular kitchen concept including fixing with slider, rollers for front and back movement complete all as specified and directed.
S&F in repair SS 304 multipurpose tandem box drawer of size 400x500x200mm and 0.6mm thickness having space for deep and shallow storage for bottom cabinets including blum tandem runners fixing clips, tandem runners cover cap, front fixing fascia bracket and mounting plate and all necessary fitting and fixture and front and back movement complete with and incl tray containers and utensils complete with screws all as specified and directed.
S&F ball catchers for cupboard and kitchen cabinets both male & female part (making each set) complete all as specified and directed.
S&F in repair 20mm dia SS 304 curtain rod including brackets, decorative finials, balls/caps on both ends of curtain rods with complete fittings all as specified and directed.
S&F in repair 20-25mm mm dia curtain rod made of aluminium Pipe with decorative lining coating,including brackets and decorative balls / caps at both ends of rod with complete fittings all as specified and directed.
Dismantiling timber scantling in fillets ,rail,posts,rafter ,purlins,etc under 40Sq.cm in section,Complete as per direcrtion of Engineer-In- Charge.
Dismantling wrought iron or mild steel work of any description and in any position not otherwise provided for,Complete as per direcrtion of Engineer-In- Charge.
S&F as in repair mild steel framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted,or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work con- forming to Fe.290.Gde-E-165 complete all as specified and as directed.
S&F Fe-410-W(Gde E-250)quality B rolled mild steel in roof trusses(Framed)trusses, purlin, crane gantries, rails and framing(beam, tee, angle, channel or flat section)including distance pieces , cleats etc, complete all as specified and as directed.
M&L for preparing new steel surfaces of any description over 10cm width or girth & painting with two coats of synthetic enamel paint over a coat of red oxide primer,Complete as per direcrtion of Engineer-In- Charge.
Providing and fixing anodised aluminium work for door windows, ventilators, casement/sliding shutters and partitions with extruded built up standard tabular and other sections of approval make fixed with rawl plugs and screws or with fixing clips or with expansion hold fastner incl neceesary filling up of gaps at junctions at top bottom & sides with required PVC neoprene belt etc. Aluminium section shall be smooth rust free straight mitred and jointed mechanically where ever required including cleats angles, aluminium snap beading for glazing/panelling, CP brass/stainless steel screw incl providing hinges/pivot and making provision for fixing of fittings where ever required. (Note:- The rate is inclusive of rollers, Maruti locks/star locks, robber beading, rubber seal etc for sliding/casement shutters required for satisfactory operations of window/ventilators/doors or as directed by Engineer-in-Charge. 2. panel fillings other than aluminium filling and necessary fittings shall be measured and paid for seoparately under respective items.)
Supply and fixing factory made UPVC Three track three panels sliding window with fly proof S.S wire mesh (Two nos. glazed & one no. wire mesh panels) upto 1.50m height made of (big series) frame 116 x 45 mm & sash 46 x 62 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead / double glazing bead of appropriate dimension. (Area of window above 1.75 sqm) comprising of uPVC multi chambered frame, with inbuilt roller track and sash extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), appropriate dimension of uPVC extruded glazing beads and uPVC extruded interlocks, EPDM gasket, wool pile, zinc alloy (white powder coated) touch locks with hook, zinc alloy body with single nylon rollers (weight bearing capacity to be 40 kg), G.I fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality, complete all as specified and directed by Engineer-in-Charge. (Glass or wiremesh shall be paid separately)
S&F Stainless steel wire cloth, 0.36mm nominal dia of wire and and average width of aperture not more than 1.40mm fixed with stainless steel wire staples complete all as specified and directed.
S & F in repair Galvanised mild steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.4mm and fixed stainless steel wire staples all as specified and as directed by Engr-in-Charge.
S&F factory made solid wood polymer composit door frame of the size 50mmx47mm width , with a wall thickness of 5mm, made out of extruded 5mm thick PRELAM PVC sheet of density 600kg/cum manufactured by as ISO-9000-2015 CERTIFIED COMPANY, HAVING PATTERN WIDTH OF 50MM AND THICKNESS OF 10MM PROVIDING WEATHER SEAL NON WOVEN SELF ADHESIVE gasket through the frame. All three frame lenghts reinforced with 19mm X19mm M.S square tube of 19 guage mitre cut at two corners and joined with 2 nos of 150 mm long brackets of 15mm X 15mm M.S square tube. The door frame shall be fixed to the wall using 8/100mm long M.S. screws through the frame by using PVC fasteners. A minimum of 4 nos of screws to be provided for each vertical member and amp; minimum 2 nos for horizontal member etc as per specification & drawing, Complete as per manufacturers specifications and directed byEngineer-In- Charge.
S&F factory made solid wood polymer composit door-Plain consisting of size 30mm thick, 70mm width out of which 50mm shall be flat and 20 mm shall be tapered in 45degree angle on either side forming stiles, and 5mm thick 95mm wide plain PVC sheet out of which 75mm shall be flat and 20mm shall be tapered in 45degree angle on ineer side to form top and bottom rail and 115mm wide PLAIN PVC sheet out of which 75mm shall be flat and 20mm shall be tapered on both side to form lock rail, top bottom and lock rail shall be provided either side of the panel. An additional 5mm thick OVC strip of 20mm width is to be stuck on the bottom side of C channel. Paneling of 5mm thick plain PVC sheet to be fitted inside the M.S. frame welded/sealed to the styles and rails with 5mmX30mm PVC sheet beading on either side and jointed together with solvent cement adhesive etc, 10mm thick (5mmX2 nos), 20 mm wide cross PVC sheet as gap insert for the top rail & bottom rail. Door to be fixed to frames using 32mm long steel screws drilled suitable to pass through both the walls of the M.S tube other hardware's should be fixed with 19x6mm size ss screws Complete all as per specification and drawing and directed by Eanineer-In- Charge.
S & F Pressed steel frames 105 x 60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc. including making good to existing surface jamb/floor complete in all respect including demolished flooring /tiles making jambs, giving existing type of surface finish etc so as to mach the existing surface, as specified
S & F Pressed steel frames 125 x 60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc. including making good to existing surface jamb/floor complete in all respect including demolished flooring /tiles making jambs, giving existing type of surface finish etc so as to mach the existing surface, as specified
Supply and fix 35mm thick factory made plain framed, panelled shutters (two panels), with lock rail and panels of 9mm thick BWP commercial ply or of venered particle board 12mm thick with commercial veneering on both faces with rails and style of 2nd class hard wood. The size of rail and stile as per IS: 1003 (Part-I), kiln seasoned and chemically pressure treated complete all as specified and directed.
M&L 30mm flush shutters, solid core construction with particle board core and plywood face panels commercial type on both faces, Complete as per direcrtion of Engineer-In- Charge.
M&L 35 mm thick 2nd class hardwood Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze etc, (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, etc, Complete as per direcrtion of Engineer-In- Charge.
M & L 2nd class hardwood Plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, supplied and fixed, Complete as per direcrtion of Engineer-In- Charge.
M&L 30mm thick 2nd class hardwood Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze etc, (without sash bars), edges of framing plain, squares, with plain, chamfered or rounded, mitred and rebated sash bars, any numbers Complete as per direcrtion of Engineer-In- Charge.
S&F in repairs 150mm size,Extruded brass handles, polished , D type with back plate, and fixed with screws complete all as specified.
S&F in repairs 300 mm size,Brass, sliding door bolt with sand or die-cast brass hasp, staple (bolt type) and fixing boltwith rolled or drawn brass bolts and fixed and fixed with screws complete all as specified.
S&F in repairs Tower bolt brass 150mm long
S&F in repairs Tower bolt brass 100mm long
S&F in repairs Hinges brass 150mm long
S&F in repairs Hinges brass 75mm long
M&L for wooden polishing / gloosy finish with matching wooden texture including melamine coating all as specified and as directed by Engr-in-charge
S&F in repair stainless steel peep hole in shutters/Doors with magnifying glass all as specified and as directed by Engr-in-charge
S&F in repair Stainless steel Door lock chain all as specified and as directed by Engr-in-charge
M&L for preparing new wooden surface of any description over 10cm width or girth and painting with two coats of synthatic enamel paint over a coat of pink primer complete all as specified
S&F 100 mm Stainless steel, Butt hinges, anodised and fixed, type C-21 complete all as specified and directed.
S&F 150 mm Stainless steel, barrel tower bolts of extruded section and fixed complete all as specified and directed.
S&F 150mm size, Stainless Steel, D type with back plate, handle and fixed with screws complete all as specified.
S&F 250mm long stainless steel, sliding door bolt, plate type, s , with bright bolt not less than 12mm dia with and including bolts and nuts complete all as specified.
S & F door strip (snake guard strip) minimum 18mm wide aluminium body and nylon brushes minimum 22mm wide alongwith screws for fixing complete all as specified and directed.
M&L for 18 - 20mm thick granite machine cut stone slab (table rubbed polished) as in cooking platform , jamb, cill, step & riser setted and jointed with cement slurry and bedded over & including 15mm thick bedding layer of cement sand mortar (1:4), & pointed with white/ coloured cement including cuuitng, rounded and chamfered edges etc complete all as specified and as directed.
M&L machine cut Prepolished Kota stone slab 18-25 mm as in floors etc laid over cement screed bed jointed with grey cement slurry mixed with pigment to match the shade the slab with and incl 15mm thick screed bed in CM 1:6 complete all as specified and as directed. .
M&L Prepolished kota slab 15-20 mm thick in risers of steps, skirting dado and pillar laid over cement screed bed jointed with grey cement slurry mixed with pigment to match the shade the slab and incl backing coat 10mm thick in CM 1:4 complete all as specified and as directed.
M&L for cutting, grinding and wax mirror polishing of Kota stone/marble stone in floors,treads of steps etc in any position and in any location complete all as specified and as directed.
M&L for cutting, grinding and mirror polishing of Kota stone/marble stone in skirting,risers of steps etc in any position and in any location
Dismantling stone slabs and tiles of any description or thickness laid bedded and pointed in any mortar as in floors, aprons etc
M & L for 10 mm thick plank tiles of wooden shade of any pattren pattern, adhesive resistant, area of each tile n. exc .36sqm over and incl 15mm thick screed bed In CM 1:6 all as specidfied and as directed by Engr-in- Charge.
M&L Non Skid ceramic coloured tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 Sqm but not exceeding 0.11 Sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match, over and including 15 mm thick screed bed in CM 1:6
M&L coloured vitrified tiles scratch and strain resistant tiles 8-9 mm thick (square/ rectangular) area of each tile exceeding 0.18 Sqm but not exceeding 0.36 Sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match, over and include 15 mm thick screed bed in CM 1:6
M&L Glazed ceramic coloured,,tiles 450x350x6-7mm thick in vertical surfaces such as skirting,dados and risers to steps over and including 10mm thick in CM (1:4).
Dismantling floor, hearth or wall tiling incl cement mortar bedding (but not backing), removing tiles and rubish off the premises
S&F in repairs aluminium door stopper double legged with rubber shoe 75mm long fixed to door shutters complete.
S&F in repairs 5mm thick bakelite sheet printed/wood grain finish fixed in aluminium panels including riubber gasket and aluminium beads complete all as specified and directed.
Demolitioin of cement conc(reinforced) in ground floors and pavings n.exc 15cms thickness (below or above GL).
M&L RCC 1:2:4 (20 mm graded aggregate) type B-1 Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like, complete all as specified including preperation of surfaces
Formwork to soffits of suspended slabs such as roof slabs, floor slab, landings and similar work not exceeding 200mm thick, horizontal or sloping finished rough complete.
TMT bars 10mm dia and over cut to length , bent to shape required including , cranking hooking ends and binding with and including mild steel wire(annealed) not less than 0.9mm dia or securing with clips complete.
S&F in repairs mild steel 300mm ordinary rat ail rod pattern springs including roller and roller plates complete incl fixing to frames using welding/screws
M&L for repairing steel windows by welding various parts eg tower bolts etc. at various heights upto any height including required fittings such as hinges etc complete and make it in functional state all as directed by Engr-in Charge.
Taking down aluminium door/window shutter carefully from frames for servicing / including replacement of broken pivots, tightening of joints of rails and styles etc complete and refixing in the same opening to obtain smooth functioning of the door complete all as specified and directed.
Dismantling wall and ceiling boards (fibre pulp, insulation, etc) or insulation boards/slabs/blankets any thickness including cover fillets, complete all as specified and as directed.
Providing and fixing False ceiling at all heights with fully perforated 12mm thick micro tegular edged or 10 mm thick square edged GRG (Glass Fibre Reinforced Gypsum) false ceiling tiles of size 595mm X 595mm of approved texture, design and patterns having moisture content less than 2%, humidity resistance of 99%, NRCO 0.50 to 0.75 as per IS 8225:1987, Noncombustible as per BS 476(part-4) -1970 and light reflectance of 85% (minimum) to be laid in true horizontal level suspended on inter-locking metal T-grid of hot dipped galvanised iron section of 0.33 mm thick (galvanised @120 gms per sqm incuding both sides) comprising of main-T runners of size 15mm X 32mm of length 3000 mm, Cross-T of size 15mm X 32mm of length 1200 mm and secondary intermediate cross T of size 15mm X 32mm of length 600mm to form grid module of size 600mm X 600mm, suspended from ceiling using galvanised mild steel items (galvanising @80 gms/sqm) I.e 50mm long, 8mm outer diameter M-6 dash fasteners, 6mm dia fully threaded hanger rod upto 1000mm length and L-shape level adjuster of size 85X25X2mm. Galvanised iron perimeter wall angle of size 24mmX24mmX0.40mm of length 3000 mm to be fixed on periphery wall/partition with the help of plastic rawl plugs at 450mm center to center and 40mm long dry wall wood screws. The work shall be carried out as per specifications, drawing and as per direction of the Engineer-In-Charge.
Dismantling boarding, any description, fixed in any position with nails/screws , complete all as specified and as directed
S& F Solid PVC Wall Lining consisting of 5mm thick Plain colour PVC sheet inclusive of solvent cement and fixing at site on PVC frame as per specifications and drawing, complete all as specified and as directed
S& F 5mm thick PVC sheet fillet of width 35mm for wall paneling inclusive of fixing on to wall to make PVC Frame as per specification and drawing, complete all as specified and as directed
S&F of mild steel monkey proofing cover with spikes on top for over head PVC tank along with the lock and key arrangement having cover properly including all necessary fittings withscrew and bolts ,comp all as specified and directed by Engr-in-Charge
RONKI RAM AND COMPANY
M/S SHANTI SARUP DINESH CHAND
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .