Karnataka

Active

Works

Buildings

CONSTRUCTION OF GOVERNMENT KPS BUILDING (PRIMARY SCHOOL-5 CLASSROOMS) IN PONNAMPET TALUK 2026-27

Public Works Department

PWD Division Office Kodagu | Kodagu, Karnataka

Amount: ₹68.4 LCloses: 5 Oct 2026

Timeline

Published21 Sept 2026
Closes5 Oct 2026
Bid Opening6 Oct 2026

Tender Value

₹68.4 L

EMD Value

₹68,500

Closing Date

5 Oct 2026, 5:00 pm

Tender Inviting Authority

Office Inviting Bids

Public Works Department

Contact Person

Executive engineer

Office Number

Work Description

CONSTRUCTION OF GOVERNMENT KPS BUILDING (PRIMARY SCHOOL-5 CLASSROOMS) IN PONNAMPET TALUK 2026-27

Tender Information

Tender ID

PWD/2026-27/BD/WORK_INDENT43447

Reference Number

PWD/2026-27/BD/WORK_INDENT43447

Tender Type

Reserved

Product Category

Buildings

Form of Contract

Two Tender Document System(Two Cover)

Location

PWD Division Office Kodagu

Source Website

Subscribe to view

Documents Required

7 documents required · 7 mandatory

Technical Bid

RequiredKPWD Class-III and above Registration Certificate

RequiredAnnual Turnover Certificate issued by Approved Chartered Accountant with UDIN last five years as per KW-3 i.e. 2021-22 , 2022-23 , 2023-2024, 2024-2025 & 2025-26 Rs.68.44 akhs Updated to 2026-27 price level.

RequiredWork Done Certificate - Satisfactorily completed, as prime contractor for at least any construction work to an extent of 25 percent of the cost of the work i.e, value not less than Rs.17.11 Lakhs in the last five years i.e. 2021-22 , 2022-23 , 2023-2024, 2024-2025 & 2025-26 Updated to 2026-27 price level.

RequiredTenderers will only be qualified, if their available tender capacity is more than the total tender value. i.e. A x N x 5 - B as per KW-3 Document.

RequiredThe contractor belonging to Category-1 should upload Caste Certificate issued by Competent Authority.

RequiredThe contractor belonging to Category-1 shall be domicile of the State of Karnataka for more than 10 years-Should upload Certificate issued by Competent Authority.

RequiredLiquid assets and /or availability of credit facilities of no less than Rs.20.55 Lakhs Credit lines/letter of credit/certificates from banks for meeting the fund requirement etc.

Eligibility Criteria

Tenders from Joint ventures are not acceptable.

Bidders shall not be under a declaration of ineligibility for corrupt and fraudulent practices issued by Government of Karnataka

The bidder is required to ensure browser compatibility of the computer well in advance to the last date and time for receipt of tenders. The departments shall not be responsible for non accessibility of e Procurement portal due to internet connectivity issues and technical glitches at bidders end.

It shall be the responsibility of the Bidder to ensure credit of Tender Processing Fee and EMD into the respective receiving bank accounts of e-Procurement on or before the last date and time of bid submission.

EMD Payments through e-Payment mode shall be made as one single transaction and payments made in part are liable for rejection.

Bidder shall pay Contract Management Module processing fees of 0.025% of the contact value (Min Rs.500/- & Max Rs.7500/-) soon after contract has been issued to bidder.

Bidders shall not be under a declaration of ineligibility for corrupt and fraudulent practices issued by Government of Karnataka

Conditional tenders are not accepted.

The employer reserves the right to reject one and all tenders without assigning any reason thereof.

The employer is not responsible for any delay in accessing E-procurement portal

Royalty on construction materials and other taxes will be deducted as per prevailing Govt Orders.

As per Karnataka State Government order LD/300/LET/2006 Blore dated 01-01-07 and Government letter no PW/134/BMS/2007 dated 27-07-07, a sum amounting to 1% of the bill amount will be deducted towards constructions labour welfare fund.

All the formats prescribed in the bid document shall be filled by the tenderer in complete manner otherwise it will be rejected

All scanned documents to be uploaded shall be in original and the Executive Engineer reserves the right to verify the documents before approval.

Materials required for the work shall be procured by the tenderer themselves and should got tested by the quality control authority before use on the work.

All the items in the tender include all lead, lifts, loading unloading, transportation, labour, hire charges of machinery curing forconcrete works, cost and conveyance of all material and all other such incidental charges necessary for successful completionof works as per the detailed technical specification and direction of Engineer in charge of this work

Contractors should follow strictly prevailing rules of labour act.

In case of the death of a contractor, after executing the agreement/ commencement of the work, his legal heir, is an eligible registered contractor and is willing, can execute and complete the work, at the accepted tender rates, irrespective of the cost of the work.

Department will not supply any materials

The tenderer should submit proposed methodology and programme of construction backed with equipment and material planning, & deployment duly supported with broad calculation and quality management, plan, proposed to be adopted justifying their capability of execution and completion of the work as per technical specifications and within the stipulated period of completion.

PERFORMANCE SECURITY: Security deposit for an amount equivalent to 5% of the contract price shall be deducted in every running bill. However, in case of first and final bill the entire security deposit will be deducted from the final bill.

Contractor should take all precautions to ensure that no damage is caused to the existing similar structures which have been constructed by other agencies during project execution. If any damage is caused, it has to be rectified at his own risk and cost.

All safety precautions, warning signs, night illumination, reflectors, deployment of security guards has to be ensured so that no untoward incident happens on account of negligence or any project activity. Contractor should indemnify the client to that extent

The bidders should submit the Bid capacity compulsorily. The details of balance work B value (works on hand & works for which tender submitted). Should be submitted in the prescribed format & should be signed by the concerned Executive Engineer / District level officer.

To qualify for award of this Contract, each tenderer should give all details and documents as per KW-3

The estimate rates are exclusive of 18% GST and GST shall be paid to the tendered amount separately.

The tenderer shall bear all costs associated with the preparation and submission of his tender, and the employer will in no case be responsible and liable for those costs.

The Tender processing fee shall not be refundable.

The intending contractors are requested to note that they should abide by the detailed instructions and conditions contained in the Standard Tender documents KW-3

Increase in GST shall not be paid in the extended period (If any) of the contract for which the contractor alone is responsible for delay as determined by the authority while granting the extension of time.

Contractors has to submit their labour EPF details with every Running Bill.

All the originals of uploaded documents in e-portal should be produced within 7 working days from the date of opening of Technical Bid at the Division Office, failing which the tender is liable for rejection and action may be initiated as per tender conditions and registration rules. No separate communication will be made in this regard.

The bidder who participates in tenders for more than one work for which tenders are invited in this IFT, the renderer must fulfill all the conditions and criteria cumulatively for the participated works.

The returns submitted to the Income Tax Department shall be uploaded or shall be produced at the time of verification of original documents at Division office.

For the vehicles / Machineries /equipments for which RTO registration is statutory, for such vehicles / machineries / equipments the contractor should upload the registration Certificate documents issued by RTO. For machineries and other equipments for which RTO registration is not applicable, for such machineries and equipments, purchase invoice document should be uploaded. If there is sale deed for such machineries and equipments, Original invoice along with registered sale deed should be uploaded. Otherwise tender is liable for rejection.

LOC/ K-form for the stipulated amount should be submitted in the format as prescribed in the bid document only. Otherwise tender is liable for rejection.

The full EMD Can be paid through e-payment in any one of the form mentioned in clause 13.1 of Bid Document or One Lakh Rupees of the specified EMD should be paid in any one of the forms mentioned in Clause 13.1 of Bid Document Bank Guarantee must be given for the remaining amount in prescribed format. The Bank Guarantee must be scanned and uploaded along with the Technical bid. The original bank Guarantee should be produced at the O/o The Executive Engineer, Karnataka Public Works Department, Kodagu Division, Madikeri before the stipulated time of opening of Technical bid. Otherwise tender is liable for rejection.

Contractors should be registered with KPWD Class-III Registration

The contractor should maintain the work during the defective liability period, i.e. for 1 year after the completion of work at his own cost.

The contractor belonging to Category-1 should upload Caste Certificate issued by Competent Authority.

If the contractor is a firm, then all the partners or members of the firm shall belong to the Category-1 as the case may be

The contractor belonging to Category-1 shall be domicile of the State of Karnataka for more than 10 years-Should upload Certificate issued by Competent Authority.

Technical Criteria

Past Experience

Section 2: ITT 3.2c To qualify for award of this contract, Quantities of work executed as prime contractor in the same name during the last five years 2021-22 to 2025-26 a) executed in any one year, the following minimum quantities of work 1. Earthwork excavation/Embankment/sub grade -217.00 Cum 2. PCC/ RCC -83.00Cum 3. Steel -6.30 Tonne 4. Solid Concrete Blocks - 218.00 Sqm 5. Plastering - 830.00 Sqm 6. Flooring-169.00 Sqm 7. Painting- 804.00 Sqm.

Work Done Certificate

Section 2: ITT 3.2 - To qualify for award of this contract, each Tenderer in its name should have in the last five years (i.e. 2021-22 to 2025-26) (b) Satisfactorily completed as prime contractor for at least any construction work to an extent of 25% of the cost of the work i.e, value not less than Rs 17.11 Lakhs

Work Done Certificate

Capabilities of Vendor

Section 2: ITT 3.6 Tenderers who meet the above specified minimum qualifying criteria, will only be qualified, if their available tender capacity is more than the total tender value amounting of Rs.68.44 LAKHS. The available tender capacity will be calculated as under: Assessed available tender capacity - A X N X 5 - B Should be greater than or equal to Rs.68.44 Lakhs where A - Maximum value of civil engineering works executed in any one year during the last five years updated to FY 2026-27 price level taking into account the completed as well as works in progress. N - Number of years prescribed for completion of the works for which tenders are invited. B - Value, at FY 2026-27 price level, of existing commitments and on-going works to be completed during the next. 9 Months -period of completion of the works for which Tenders are invited. Note: The statements showing the value of existing commitments and on-going works as well as the stipulated period of completion remaining for each of the works listed should be countersigned by the Employer in charge, not below the rank of an Executive Engineer or equivalent

Audited CA Certificate of Annual Turnover

Financial Status

Section 2: ITT 3.3 - Each Tenderer should further demonstrate : (b) Liquid assets and /or availability of credit facilities of no less than Rs. 20.55 Lakhs (Credit lines/ letter of credit/ certificates from banks for meeting the fund requirement etc.

Line of Credit

Section 2: ITT 3.2 - To qualify for award of this contract, each Tenderer in its name should have in the last five years (i.e. 2021-22 to 2025-26) (a) Achieved in at least One financial years a minimum financial turnover (in all classes of civil engineering construction works only) of Rs 68.44 Lakhs.

Audited CA Certificate of Annual Turnover

Others

The contractor belonging to Category-1 shall be domicile of the State of Karnataka for more than 10 years-Should upload Certificate issued by Competent Authority.

Others -- Residential certificate

KPWD Class-III and above Registration Certificate

PWD Registration Certificate (Class I/II/III/IV)

The contractor belonging to Category-1 should upload Caste Certificate issued by Competent Authority.

Others -- Caste Certificate

Work Locations

Fee & Financial Details

Tender Fee Amount

₹1,720

EMD Fee Amount

₹68,500

Important Dates

Last Activity

21 Sept 2026

Published

21 Sept 2026

Bid Opening

6 Oct 2026

Download Ends

3 Oct 2026

BOQ Preview

•

Construction of Ground Floor Primary School Building at KPS Ponnampet

•

Earth work excavation by manual means for drains, canals, waste weir, draft, approach channels, key trenches, foundation of Buildings & bridges and such simillar works in all kinds of...

•

Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates ...

•

Providing and laying in position Cement Concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with ...

•

Providing Size Stone masonry with hard stone in foundation & plinth with

•

Cement mortar 1:6 (1 cement : 6 coarse sand) ---- With all lead and lift including cost and conveyance of all materials,labour,...

•

Providing and laying in Cement Concrete for all Basement & surface level works, return walls, retaining walls, sunken floors etc. The granite/trap/ basalt crushed graded coars...

•

Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite...

•

Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating Each depos...

•

Construction of Embankment by excavating the available approved Gravel/ Murrum deposited at a place or borrow pits during or prior excavation with all lifts and lead, transporta...

•

Providing and injecting chemical emulsion for Pre-constructional Anti-Termite Treatment, creating continuous chemical barrier under and around the column pits, walls, tr...

•

Providing and constructing load bearing wall with Solid Concrete blocks of size 400x200x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 con...

•

Providing lath plaster with cement mortar 1:3, 5cms thick with 6mm dia mild steel bars at 20 cms. c to c both horizontally and vertically fixed with chicken mesh for drop chajja,facia, backing to cup ...

•

Providing & fixing 30mm thick factory made rigid foam Prelam Panelled Door Shutters made from M.S. tube of 19x19mm, 19 gauge for stiles and 15x15mm for top & bottom rails, covered with heat moulded Pr...

•

Providing & fixing of 2-track x 2-panel sliding windows made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic E...

•

Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to open...

•

Providing 6 mm cement plaster with cement mortar 1:3 (1 cement : 3 fine sand) on concrete surface / ceilings including rounding off corners wherever required smooth rendering, providing and removi...

•

Providing 12 mm cement plaster with cement mortar 1:6 (1 cement: 6 fine sand) including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including co...

•

Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even an...

•

Providing 20 mm cement plaster of mix :1:6 (1 cement: 6 fine sand) to brick/stone masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, incl...

•

Providing and laying vitrified floor tiles with thickness 9-10 mm in different sizes with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and...

•

Providing and laying Polished Sadarahalli Grey Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural ...

•

Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, ...

•

Finishing walls with Acrylic Smooth exterior paint of required shade :New work (Two coat applied @ 1.67L/10 m² over and including priming coat of exterior primer applied @ 2.20 kg/10 m²) with paint...

•

Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade :Two coats on new work over an under coat of suitable shade with ordinar...

•

Providing Flush/ Ruled pointing: Pointing on stone work with cement mortar 1:3 (1 cement : 3 fine sand) after raking joints to depth nicely lin- ing, including cost of materials, labour, curing as...

•

Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and...

•

Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for t...

•

Providing wall black boards in 12mm thick with CM 1:3 and applied with primer & two coats of acrylic emulsion black paint including finishing etc.,complete. ---- With all lead and lift including c...

•

Providing and fixing pressed steel door frames conforming to IS: 4351, manufactured from commercial mild steel sheet of 1.60 mm thickness, including hinges, jamb, lock jamb, be...

•

Mechanical Means -

•

Earth work in surface excavation by mechanical means for lowering & leveling the ground for all works other than foundation in all kinds of soils & upto depth not exceeding 300mm a...

•

Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite...

•

Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite...

•

Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite...

•

Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite...

•

Providing and fixing aluminium round shape handle of outer dia 100 mm with sS screws etc. complete as per direction of Engineer-in- charge: Anodized (AC 15 ) aluminium including cost of mate...

•

Providing and fixing chromium plated brass 100 mm mortice latch and lock with 6 levers and a pair of lever handles of approved quality with necessary screws etc. complete. ---- With all lead and lift ...

•

Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc...

•

Steel Fabrication

•

Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting,...

•

Construction of First Floor Primary School Building at KPS Ponnampet

•

Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite...

•

Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite...

•

Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite...

•

Providing and constructing load bearing wall with Solid Concrete blocks of size 400x200x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 con...

•

Providing and fixing pressed steel door frames conforming to IS: 4351, manufactured from commercial mild steel sheet of 1.60 mm thickness, including hinges, jamb, lock jamb, be...

•

Providing & fixing of 2-track x 2-panel sliding windows made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic E...

•

Providing 6 mm cement plaster with cement mortar 1:3 (1 cement : 3 fine sand) on concrete surface / ceilings including rounding off corners wherever required smooth rendering, providing and removi...

•

Providing 12 mm cement plaster with cement mortar 1:6 (1 cement: 6 fine sand) including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including co...

•

Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even an...

•

Providing and laying vitrified floor tiles with thickness 9-10 mm in different sizes with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and...

•

Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, ...

•

Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade :Two coats on new work over an under coat of suitable shade with ordinar...

•

Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and...

•

polyurethane based single Component for New surface - Providing and laying water proofing treatment to the Roof with PU based single component elastomeric pure polyurethane based coating on New terrac...

•

Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for t...

•

Providing wall black boards in 12mm thick with CM 1:3 and applied with primer & two coats of acrylic emulsion black paint including finishing etc.,complete. ---- With all lead and lift including c...

•

Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite...

•

Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite...

•

Steel Fabrication

•

Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting,...

•

Providing and fixing aluminium round shape handle of outer dia 100 mm with sS screws etc. complete as per direction of Engineer-in- charge: Anodized (AC 15 ) aluminium including cost of mate...

•

Sub Estimate for Furnitures (Table, chair, Storage Unit) For KPS Ponnampet

•

Rubber/Jungle Wood Raton Bottom Chair : (Seat with cushion back with patti) leg size 2"x1.5" with front and back legs of size 7"x2"x1.5".Handle of size 2"x1.5". Chair side bars 3"x1.1/4" pattis. Chair...

•

Office Table : Of size 4'x2.5'. Made out of 12/18 mm MDF one key board and 3 drawers on the right side . Table to be covered with 1mm laminate wherever visible. Hardware of the drawer

•

should be teles...

•

Notice Board: Of size 4'x3' using 18mm plywood for body, back 8mm plywood and 12mm soft board with cloth. And 5mm plain glass for door with lock, and alluminium chanal with teak wood beading. Outersid...

•

Providing and fixing storage unit of 0.75m width made out of 19mm thick commercial ply vertical upport finished in approved 1.5mm aminate with 12mm thick ply packing internally finished with enamel pa...

•

Sub estimate for Electrical service For KPS Ponnampet

•

Concealed Conduit System Supplying heavy gauge PVC conduit pipe ……mm dia .mm thick confirming to IS 2509 with suitable size bends, metal/PVC junction boxes, adhesive paste etc., and running before...

•

Concealed Conduit SystemSupplying heavy gauge PVC conduit pipe ……mm dia .mm thick confirming to IS 2509 with suitable size bends, metal/PVC junction boxes, adhesive paste etc., and running before ...

•

Supplying heavy gauge PVC Conduit Pipe ….dia .mm thick with suitable size bends, metal junction boxes adhesive paste etc., by groove cutting in the wall and fixing by bracing U or J hooks and cement...

•

Supplying and fixing PVC/metal conduit Deep junction box. ( COMMON Electrical SR of 2023-24, Part - III , Utilization ( PWD Electrical ) )19/20 mm deep Junction box ---- With all lead and lift includi...

•

Supplying and fixing PVC/metal conduit Deep junction box. ( COMMON Electrical SR of 2023-24, Part - III , Utilization ( PWD Electrical ) )25 mm deep Junction box ---- With all lead and lift including ...

•

Supplying And Fixing Metal Fan Box with Round Hook.( COMMON Electrical SR of 2023-24, Part - III , Utilization ( PWD Electrical ) ) ---- With all lead and lift including cost and conveyance of all mat...

•

Supplying and wiring adopting loop system in existing PVC Conduit /casing capping casing capping using 2x1.5Sqmm (Phase & Neutral) & 1x1.0 sqmm (Earth wire) FRLS multi strand PVC insulated copper wire...

•

Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS...

•

Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall 1...

•

Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing m...

•

Supplying and fixing of modular switch/ Socket/stepped electronic fan regulator/ dimmer/telephone socket etc on existing modular switch plate. Is 3854 and IS 1293.( COMMON Electrical SR of 2023-24, Pa...

•

Supplying 4 mm thick white plastic plate and covering for junction boxes of size . mm conduit using necessary machine screws. 110 mm ---- With all lead and lift including cost and conveyance of all ma...

•

Supplying of feet PVC Batten with integrated LED tube. W with high quality diffuser with Life of 25000 burning hours and 70 percent lumen maintenance with CRI grater 80. Power Input: 220-240V at 50 or...

•

Fixing all types and all capacities of fluorescent / false ceiling / spot light / CFL / LED fittings indoor on the wall / ceiling / rafters / girders using 23/0.0076” twin twisted PVC insulated wire...

•

Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking ca...

•

Supplying and fixing regular MCB distribution boards on wall / wood board / flush mounting using required clamps, bolts, nuts etc., with provision for fixing suitable type capacity MCB's single phase ...

•

Supplying fixing and wiring earth electrode for grounding of lifts, transformers, DG sets etc. using 40 mm dia 2.9 mm thick 2.5m long GI pipe with GI funnel with mesh and suitable size reducer fixed o...

•

GI/Copper strips for grounding connections, using necessary fixing materials as required. 25 x 3 mm GI strip ---- With all lead and lift including cost and conveyance of all materials,labour, hire cha...

Documents

Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.

NIT Documents

KW-3 43447-Cat-1.doc

Tender Document • 2.05 MB

Notification 25 KPS.pdf

Others - NOTIFICATION • 0.45 MB

Randamization.pdf

Others - Randamization copy • 0.03 MB

Ready to Participate?

Download all tender documents and submit your bid

Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .

Loading…

Karnataka

Active

Works

Buildings

CONSTRUCTION OF GOVERNMENT KPS BUILDING (PRIMARY SCHOOL-5 CLASSROOMS) IN PONNAMPET TALUK 2026-27

Public Works Department

PWD Division Office Kodagu | Kodagu, Karnataka

Amount: ₹68.4 LCloses: 5 Oct 2026

Timeline

Published21 Sept 2026
Closes5 Oct 2026
Bid Opening6 Oct 2026