Kerala

Active

Works

Civil Works - Others

Kulathuppuzha Devaswom in Punalur group-Providing GI roofing to the old toilet blocks

Travancore Devaswom Board

Kulathuppuzha | Kollam, Kerala

Amount: ₹7.2 LCloses: 22 Oct 20264d left

Tenderkart AI

Reads all tender documents

Eligibility, documents, scope, Go/No-Go checksEligibility, required documents, scope of work and Go/No-Go checks for this tender, in one click.

Timeline

Published16 Oct 2026
Closes22 Oct 2026
Bid Opening23 Oct 2026

Tender Value

₹7.2 L

EMD Value

₹18,100

Closing Date

22 Oct 2026, 4:00 pm4d left

Tender Inviting Organisation

Name

Executive Engineer

Address

Executive Engineer TDB, Nandancode, Thiruvananthapuram-3

Work Description

Kulathuppuzha Devaswom in Punalur group-Providing GI roofing to the old toilet blocks

Tender Information

Tender ID

2026_TDB_880638_1

Reference Number

OEO/TDB/TR/14706/2026_5_1_1/1 (ET-49)

Tender Type

Open Tender

Product Category

Civil Works - Others

Form of Contract

Item Rate

Period of Work

20 days

Location

Kulathuppuzha

Source Website

Subscribe to view

Eligibility / Pre-Qualification

refer NIT

Documents Required

7 documents required · 7 mandatory

Fee/PreQual/Technical/Finance

RequiredSchedule of Work (.xls)

RequiredForm of Tender SBD Part VI (.pdf)

RequiredPreliminary Agreement (.pdf)

RequiredAffidavit as per SBD Part VI (.pdf)

RequiredGST registration certificate and PAN (.pdf)

RequiredCopy of Contract license (.pdf)

RequiredBid Document (SBD) (.pdf)

Fee & Financial Details

Tender Fee Amount

₹1,888

EMD Fee Amount

₹18,100

Important Dates

Last Activity

16 Oct 2026

Published

16 Oct 2026

Bid Opening

23 Oct 2026

Download Starts

16 Oct 2026

Download Ends

22 Oct 2026

Submission Starts

16 Oct 2026

Bill of Quantities

Item RateBoQ_Ver3.0INR

BoQ1 (12 items)

Sl No	Description	Qty	Unit	Est. Rate	Est. Amount
1Providing roofing sheet
1.001	10.19:Providing and fixing mild steel round holding down bolts with nuts and washer plates complete.	100	kg	-	-
1.002	10.1:Structural steel work in single section, fixed with or without connecting plate, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.	120	kilogram	-	-
1.003	5.9.1:Centering and shuttering including strutting, etc. and removal of form for:Foundations, footings, bases of columns, etc for mass concrete	1.2	sqm	-	-
1.004	4.1.3:Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:2:4 (cement : 2 coarse sand (zone-III)derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources)	0.8	cum	-	-
1.005	13.1.1:12 mm cement plaster of mix:1:4 ( 1 cement : 4 fine sand)	14	sqm	-	-
1.006	10.16.1:Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete.Hot finished welded type tubes	1,050	kg	-	-
1.007	OD154361/2026-2027:Steel work for purlin/single section with G I pipes including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete	620	kg	-	-
1.008	13.61.1:Painting with synthetic enamel paint of approved brand and manufacture to give an even shade:Two or more coats on new work	155	sqm	-	-
1.009	12.50:Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+0.05%), total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling/self tapping screws of size (5.5x55mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.	340	sqm	-	-

Documents

Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.

Tender Page Snapshot

details.html

html • 0.03 MB

NIT Documents

Tendernotice_1.pdf

PDF • 0.29 MB

Work Item Documents

BOQ_1497634.xls

BOQ • 0.31 MB

SBDET49.pdf

Tender Documents • 1.22 MB

FormsET49.pdf

Tender Documents • 0.30 MB

Ready to Participate?

Download all tender documents and submit your bid

Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .

Loading…

Sl No	Description	Qty	Unit	Est. Rate	Est. Amount
1Providing roofing sheet
1.001	10.19:Providing and fixing mild steel round holding down bolts with nuts and washer plates complete.	100	kg	-	-
1.002	10.1:Structural steel work in single section, fixed with or without connecting plate, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.	120	kilogram	-	-
1.003	5.9.1:Centering and shuttering including strutting, etc. and removal of form for:Foundations, footings, bases of columns, etc for mass concrete	1.2	sqm	-	-
1.004	4.1.3:Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:2:4 (cement : 2 coarse sand (zone-III)derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources)	0.8	cum	-	-
1.005	13.1.1:12 mm cement plaster of mix:1:4 ( 1 cement : 4 fine sand)	14	sqm	-	-
1.006	10.16.1:Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete.Hot finished welded type tubes	1,050	kg	-	-
1.007	OD154361/2026-2027:Steel work for purlin/single section with G I pipes including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete	620	kg	-	-
1.008	13.61.1:Painting with synthetic enamel paint of approved brand and manufacture to give an even shade:Two or more coats on new work	155	sqm	-	-
1.009	12.50:Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+0.05%), total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling/self tapping screws of size (5.5x55mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.	340	sqm	-	-

Sl No

Description

Qty

Unit

Est. Rate

Est. Amount

1Providing roofing sheet

1.001

10.19:Providing and fixing mild steel round holding down bolts with nuts and washer plates complete.

100

1.002

10.1:Structural steel work in single section, fixed with or without connecting plate, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.

120

kilogram

1.003

5.9.1:Centering and shuttering including strutting, etc. and removal of form for:Foundations, footings, bases of columns, etc for mass concrete

1.2

sqm

1.004

4.1.3:Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:2:4 (cement : 2 coarse sand (zone-III)derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources)

0.8

cum

1.005

13.1.1:12 mm cement plaster of mix:1:4 ( 1 cement : 4 fine sand)

sqm

1.006

10.16.1:Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete.Hot finished welded type tubes

1,050

1.007

OD154361/2026-2027:Steel work for purlin/single section with G I pipes including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete

620

1.008

13.61.1:Painting with synthetic enamel paint of approved brand and manufacture to give an even shade:Two or more coats on new work

155

sqm

1.009

12.50:Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+0.05%), total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling/self tapping screws of size (5.5x55mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.

340

sqm