REPAIR WORKS TO JOINERY AND OTHER RELATED WORKS IN CERTAIN BUILDING AND PROVN OF CONCERTINA COIL AND Y SAHPE IRON ANGLE ON BOUNDARY WALL NEAR 5 ASC AND CERTAIN MISC WORKS UNDER AGE B/R-I AT GE (AF) NO 2 JODHPUR

Amount

Taking down chowkats or frames exe 1.5 Sqm but n.exc 4 sqm each with shutter (without taking off shutters frame the frame) and removing from site complete all as directed.

Taking down chowkhat or frame n'exc 1.50 sqm each (with out taking of shutters from the frame) and removing from site complete all as directed.

Dismantling structural steel work including ,rolling shutters, doors, gates etc

Resecuring or easying and adjusting without taking down shutters of any description n exe 1 sq.m each

Resecuring or easying and adjusting without taking down shutters of any description exe 1 sq.m but n exe 2.0 sqm each

Resecuring or easying and adjusting without taking down shutters of any description exe 2.0 sqm each

S& F in repairs Prelaminatd particle board, interior grade 18/19 mm thick , prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber work or other place as builtup furniture as specified and as directed,

S & F Plain fillets 2nd class hard wood of sectional area exe 3 and n exe 6 cm , square, rectangular or triangular in section, clean sawn, secured with mills or brads.

S & F structural steel rolled section in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering, Doo0rs etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive or steel sheeting or other covering, running rails and guides) and hanging; complete confirming to FE-290(Gde E-165) also fastening and fixing complete all as specified and directed

S&F frame work such as guard bars ,grills, grating etc with ends of bars shouldered and or rivetted or forged into spikes, framed guard bars, barred iron doors,ladders etc and similar wks conforming to FE-290(Gde E-165)

S & F mild steel work as Flat iron ,Hand rails, half round or other stock section or core for wooden hand-rail straight portion, drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps including embedding in concrete and screwing etc. wind ties for roof including securing bolts; posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to FE-290(Gde E-165)

S&F for second class hard wood plain, solid, straight, chowkats and frame wrought framed, put together, with glue, pinned at joints, all as specified and directed.

M&L for preparation of new wooden surface of any description over 10cm width or girth and applying two coats of synthetic enamel paint (1stquality) over one coat of pink primer complete all as specified and directed.

M&L for preparation of new steel surface of any description over 10cm width or girth and applying two coats of synthetic enamel paint (1stquality) over one coat of red oxide primer complete all as specified and directed.

S& F butt hinges ,40 mm of size cast brass with mild steel hinge pin, bright polished type B-11

S& F 40 mm dia cupboard knobs fixed with nuts, screw and washer of brass polished bright finished.

Cutting holes in stone walls for inserting hold fasts and making good dismantled portion in CM 1:3 or cement concrete 1:2:4 depth of embedded portion of hold fast exc half brick and n exc one bricks.

S & F Plain framed, panelled shutter of 2nd class hard wood (two panel) of 35mm thick factory made shutter with lock rail and panel of 9 mm B.W.P commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS: 1003 (Part I), kiln seasoned and chemically pressure treated

S/F Flush shutters,40 mm thick paticle board core construction, with block board core and plywood face panels, commercial type on both sides

M/L for Glazed and skeleton shutters of thickness 35mm of IInd class hard wood , open rebated and prepared to receive glass, gauze, etc. (without sash bars), edge of framing plain, chamfered or rounded, fitted with cut and mitred beds for securing glass, etc.; sizes of members of shutters as specified in SSR Part I, Section 8. clause 8.20 (a); supplied and fitted to chowkats note: Glazed or clothetc in panelsor sash square shall be measured seperately

S&F Factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails, M.S. frame shall be covered with heat moulded plain colour PVC `C' channel heaving a PVC sheet strip of 20mm width suck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S frame wedded/ sealed to the stiles, & rails with suitable PVC sheet beading, and joined together with solvent cement, supplying & fixing in the frame at site as per specification & drawing.

Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S Square tube, supplying & fixing in opening as per specification & drawing

S&F in repairs steel windows with side hungs shutters including projecting type hinges with steel handles, steel peg stay complete with glazing bar, devetailed or welded.

S&F steel windows with side hungs shutters including projecting type hinges with steel handles, steel peg stay complete without glazing bar, devetailed or welded.

ditto as per item no above but fixing only

S &F in repairs windows or ventilators, fixed type ,with glazing bars

ditto as per item no above but fixing only

S/F in repairs steel handles including painting ,welding , boltings in steel windows/ ventilators etc as directed

S/F in repairs steel hinges including paiting, welding, bolting in steel windows / ventilators as directed

S/F in repairs peg stays including paiting, welding, bolting in steel windows/ ventilators as directed

Welding in repairs exc 2.5 cm & n exc 5 cm in length & thickness of metal n.exc 6 mm

S&F in repair 3mm thick sheet glass, ordinary quality and glazing with oil putty in square n.exc 0.5 sqm in each pane incl glazing clips incl hacking out of old.

S&F in repairs 3mm thick figured glass, ordinary quality and glazing with oil putty in square n.exc 0.5 sqm in each pane incl glazing clips , spring clips incl hacking out of old.

S/F floor door stoppers of alluminiun alloy body and toung , anodised with harddrawn steel spring with overall length of cover plate is 140 mm

S&F Aluminium anodised barrel tower bolt of extruded section 150mm size

S&F Butt hinges,extruted aluminium alloy with galvanised mild steel type C21of size 100 mm.

S&F Aluminium alloy anodised sliding door bolt with hasp and staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed size 300mm long.

S&F extructed aluminium alloy handles, fabricated type,anodised of size 150mm.

S&F extructed aluminium alloy handles, fabricated type,anodised of size 100mm.

S/F in repair door closer hydraulically regulated,aluminium extruded section body designation No. 1 universal type, suitable for door shutters up to 700 mm in width and of weight not more than 35kg and fixed

S&F in repair drapery rod in any length, high strengh MS pipe with corrugated PVC extrusion having outer dia 28 mm with plastic ring of ABS plastic of dia 56 to 58 mm all as directed by Engineer-in-charge

S&F in repair decorative finals ABS plastic fancy type bracket, fancy type hook in matching colour of steel powder quoted paint of same colour of rod incl all as directed Engineer-in-charge.

S&F in repairs Galvanised MS wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with tinned tacks or galvanised wire staples including necessary welding, bolting reqd or wooden beading on wood work complete all as specified and directed.

M&L for mild steel 300mm, ordinary rat tail rod pattern springs including roller and roller plate complete fixed to stone/ concrete chowkats with flat iron 40x3mm size 75 cm long with necessary bolts, etc. complete

1. Demolition of Brickwork or stone/boulder masonry, build in cement mortar including all quoins, arches, pillars etc, but excluding ashlars facings, dressed stonework and precast concrete articles in any possition, any palce all as specified and as directed.

2. M&L PCC, Type B2 1:2:4 (40 mm graded aggregate) in walls, any thickness, size or shape including pilasters, buttresses columns, pillars, boundary pillars and posts (including caps and bases) all as specified and as directed.

3. S&F Mild steel, posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe 410-0 or Fe 310-0

4. S&F Galvanised, 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails straining bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. as directed (each line wire to be measured)

5. M&L preparation of new steel Surfaces & applying two coat of synthetic enamel paint over a coat of red oxide primer all as specified and as directed.

6. M&L Preparing new surfaces, plastered or unplastered and applying two coat of cement base paint on walls all as specified and as directed.

7. S&F concertina coil fencing with punch tape concertina coil 600mm dia 10 M openable length (total length 90 M) having 50 numbers rounds per 6 mtr length, upto 3 M ht of wall with existing angle iron Y shaped placed 2.4 M/ 3 Mtr appart and with horizontal RBT (reinforced Barbed wire), stud tied with GI staples and GI clips to retain horizontal, including necessary bolts or GI barbed wire tied to angle iron, all complete as per direction of Engr-in-Charge wiith reinforced barbed tape (RBT) /spring core (2.5mm th) wire of high tensile strength of 165 KG/ Sq mm with tape (0.52mm thick and wt 43.478 gm/M) (cost of MS angle, cement concrere block shall be paid seperately).

8. Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing from site and rubbish off the premises.

9. M&L for non skid ceramic tiles, coloured, 7 to 8 mm thick in floors etc. (square/rectangular) area of each tile exc. 0.06 sqm but n. exc. 0.11 sqm, set & jointed in neat cement slurry & pointed in white or coloured cement to match over and including 15mm thick screed bed in CM 1:6.

10. M&L for glazed ceramic tiles, coloured, 350x250x7mm/450x350x7mm thick on vertical surfaces such as skirtings, dados and risers to steps etc, set & jointed in neat cement slurry & pointed in white or coloured cement to match over and including 10mm thick rendering in CM 1:4 on stone masonry surfaces.

11. M & L for marble work 20 mm thick (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with marble shade of makarna white , Makrana Adangi as specified and directed by Engr-in-charge

12. Supply and laying 50 mm bore tubes, galvanized steel, medium grade, with all fittings and fixed complete to walls and ceilings or laid in floors all as specified and directed.

Amresh Traders

BAGHELA CONSTRUCTION

Om Trading Corporation

DEV INDUSTRIES