PROVIDING PLINTH PROTECTION AT ALL THE EXISTING RESIDENTIAL QUARTERS AND RESTORATION OF EXISTING QUARTERS FOR APPRENTICE TRAINEES.

Earth work in surface excavation not exceeding 30 cm in depth but exceeding 1.5 m in width as well as 10 sqm on plan including getting out and disposal of excavated earth upto 50 m and lift upto 1.5 m, as directed by Engineer-in- Charge.

Providing and filling sand in plinth, under floors, all kinds of maintenance works including watering, ramming, consolidating and dressing etc., all complete as per specifications and as directed by the Engineer-in-charge.

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level 1:4:8 (1 Cement : 4 coarse sand (zone-III) derived from natural sources : 8 graded stone aggregate 40 mm nominal size derived from natural sources) as directed by Engineer-in-Charge.

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level 1:2:4 (1 cement : 2 coarse sand (zone-III) derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources) as directed by Engineer-in-Charge.

Half Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in:Cement mortar 1:4 (1 cement : 4 coarse sand) as directed by Engineer-in-Charge.

Supply of vertical multistage centrifugal pump of Kirloskar make, model : KSIL/KCIL 64-3-1 having Power rating : 15KW/20HP, suction/discharge pipe size : 100mm,3 Stage ,flow range : 30-80 m^3/hr ,Head range : 76 to 47m WC as directed by the Engineer in charge .

Supply of portable type 2 KVA petrol generator of brand like Honda make, model : HA 2000 with GX160 Engine or equivalent as per the specification and as directed by the Engineer in charge

Supply of 2000 liter Three Layered Cylindrical Vertical Tank for water storage with lid cover (White Colour,Sintex) as per the specification and as directed by the Engineer-in-charge.

Supplying of sal wood of various sizes and used for door, frame, windows etc. The need is totally based on site requirement. Hence,size and quality of wood will be ensure by our departmental person at the time of purchase by contractor and as directed by the Engineers -in-charge.

Supplying of ISI marked flush door shutters 25 mm thick ( for cup-board ) conforming to IS : 2202 ( Part - 1) non-decorative type, core of block board construction with frame of first class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face venners on both face of shutter including all MS Oxidised fittings and fixture like 3 nos. of 100 mm size hinges, 2 nos of 100 mm handles, 2 ns of 16 mm dia and 250 mm length Aldrops, 2 nos of 150 mm length tower bolts, 50 mm size wooden cleats with hinges all complete and as directed by Engineer-in-charge.