Constructing C.C Approach Road On Western Drain at Village Mulsan Ta.Mehsana Di. Mehsana

BILL OF QUANTITIES

(A) Percentage Rate Tender (Up to INR 50 Cr. )

Name Of Work:- Constructing C.C Approach Road On Western Drain at Village

Mulsan Ta. Mehsana Di. Mehsana

Item Description of Item (with brief Quantity Unit Rate Amount

No specificationand reference to book In

ofspecifications) figures

1 Box cutting the road surface to proper 598.00 Cmt. 109.04

slope and camber for making a base for

road work including removing the

excavated stuff and depositing on the road

side slope as directed upto 50Mt.lead

2 Provdining and laying W.B.M of B.T.M.C 184.00 Cmt. 1659.49

metal of size 45 mm to 63 mm size

including 0.12 Cu.M. Stone Screeing &

Cu.M. stone dust as filler including

spreading, watering & consolidation by

vibratory roller 80KN to 100KN static

3 Providing and laying foundation concrete 138.00 Cmt. 4071.00

of proportion as under by using cement,

sand and machine crushed course

aggregate laid in situ including necessary

temping, smooth finishing, watering and

curing as directed with all leads and lifts

etc complete. (a) PCC 1:3:6

4 Providing and laying RCC 1:1.5:3 grade by 242.00 Cmt. 5708.00

using cement, sand and crushed metal for

different items like copping work, pier cap,

abutment cap, Wearing coat, Skin

concrete, Solid slab upto 60 cm. thick,

Barrel of canal syphons, barrel of R.C.C.

through, & beams for foundation and

super structure as per approved design

including providing necessary centering,

shuttering and form work, vibrating,

smooth finishing, watering and curing as

directed with all leads and lifts etc.

5 Providing and laying HYSD/TMT Fe 415 4.20 MT 71366.00

steel bar reinforcement for R.C.C. works

and anchor bar with providing binding

wires including cutting, bending, welding,

binding in position hooking, placing in

position with all leads & lifts etc.

complete.(C) TMT Fe 500 steel bars

6 Providing and Filling the Polysulphide 161.00 Rmt. 533.00

Joint Selent of the approved make in the

expansion and contraction joint including

Clearing the Joint With air water jet

I/We am/are willing to carry out the work ................... % above/below percent(Should

be written in figures and words) of the estimated rate mentioned above. Amount of my /our

tender works out as under.

Estimated amount put to tender Estimated amount put to tender

In words In words

(B) For Item Rate Tender (For above INR 50 Cr.):

Item Description of Item (with brief Quantity Unit Rate Amount

No specificationand reference to

book ofspecifications) In In

(A) Total Tendered Amount

(B) Rebate on above tendered amount (if any) % (in figure)

(C)Net Tendered Amount (A-B) (in figure)

1 The Contractor shall exhibit a board with brief details of work as directed by the

Engineer-In-Charge for which no extra payment shall be made.

2 The labour cess will be deducted as per prevailing rules i.e. 1% of the work done.

3 GST and Income tax TDS will be deducted at a source while making payments of bills

4 In all R.C.C. Items in Rate Analysis Standard Cement Consumption has been taken as per

Govt. G.R. NO.: MIS102010/17/K1 Dated:30/07/2018 as stated in S.O.R. therefore in

R.C.C. items where there is a change as per actual mix design, the cost of difference of

cement consumption will be deducted from the rate of original item at the rate of input

rate i.e. Rs. 5234.00/MT