PROVN OF MISC EM AND BR WORKS IN TYRE BAY TECH COMPLEX IN 24 SQN AT AF STATION BAREILLY

Amount

M&L for roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust, etc complete all as specified and as directed.

M&L for 15mm thick screed bed or bedding layer of cement mortar (1:4) for laying floor/ wall finishes complete all as specified and as directed.

M&L for machine cut kola stone slab flooring 20-25mm thick with and including over 20mm thick cement screed base CM (1:6), laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and as directed.

M&L for Kota stone slab 20-25mm thick as in riser of steps, skirting, dado and pillar with and including over 10mm thick cement screed base (1:4), laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and as directed.

Taking down of cement plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc. complete all as specified and as directed.

M&L for rendering 15mm thick in CM (1:6) on fair faces of brick work or concrete surfaces, finished even and smooth without using extra cement etc complete all as specified and as directed.

Hacking out old broken glass (any thickness, size, quality or description) from wooden frames or stone, concrete or brick surrounds, glazed with putty or fixed with bead complete all as specified and as directed.

S&F 10mm thick toughened glass as in hinged doors, partitions, automatic doors and similar work including cutting to shape, drilling holes required complete all as specified and as directed.

M&L for 100 mm thick (compacted thickness) PCC (1:2:4) type B2 (using 40mm graded crushed stone aggregate) as in sub base of road complete all as specified and as directed.

M&L for chequered cement concrete tiles (with grey cement and pigment) with plastic coating of size 30cm x 30cm x 25mm thick, set, jointed and pointed in neat cement slurry in floors with and including 20mm thick screed bed in CM (1:4) etc complete all as specified and as directed.

S&F solid PVC wall lining consisting of 5mm thick plain colour PVC sheet inclusive of solvent cement and fixing at site on PVC frame as per SSR specifications etc complete all as specified and as directed.

S&F 5mm thick PVC sheet fillet of width 35mm for wall paneling inclusive of fixing on to wall to make PVC frame as per SSR specification etc complete all as specified and as directed.

S&F powder coated aluminium frame for doors, windows, ventilators with one or more rebates including joining cleats for fixing etc. complete duly powder coated (minimum thickness of powder coating 50 micron) all as specified.

M&L for powder coated aluminium door shutters (minimum thickness of powder coating 50 micron), aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber neoprene packing, handles 2 Nos in each door, hinges, anodized aluminium snap beading screw etc. complete all as specified and directed by Engineer-in-charge.

M&L for coloured tile glazed ceramic as in vertical surfaces of size (300x450)mm x 7mm thick, set and jointed in neat cement slurry and pointed in white or colour cement to match with and including over 10mm thick backing coat in CM (1:4) complete all as specified and as directed.

S& F PVC (SWR) pipes 110 mm dia single socketed in any length with rubber ring joints fixed to wall complete all as specified and as directed.

Excavation of post holes (or similar holes) each n.exc 0.5 Cu.m, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm thick in soft/loose soil complete all as specified and as directed.

M&L for PCC (1:2:4) type B2 (using 40mm graded stone aggregates) as in bed block etc complete all as specified and as directed.

Supply only GI chain link fencing mesh of size 50mm x 50mm and dia of wire 3mm complete all as specified and as directed.

Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc. including provision of binding wire all as specified and as directed.

M&L for mild steel hand rails, half round or other stock section or core for wooden hand-rail straight portion, drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps including embedding in concrete and screwing etc. wind ties for roof including securing bolts; posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165 all as specified

M&L for Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to IS.1161-1979 grade St.-240 etc. complete all as specified and as directed.

M&L for mild steel framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete conforming to Fe- 290 (Gde E-165)

S&F pre- painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.5mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws etc complete all as specified and as directed.

S&F Pre-painted galvalume aluminum zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and as directed.

M&L for preparation new steel surface of any description over 10cm in width and girth not otherwise described and applying two coats of synthetic enamel paint over a coat of zinc chrome primer complete all as specified and as directed.

Excavation in trenches in soft/loose soil not exceeding 1.5 mtr wide and not exceeding 1.5 mtr in depth and getting out complete all as specified and as directed.

M&L for PCC (1:3:6) type C2 (using 40mm graded stone aggregates) as in foundations, filling and mass concrete etc complete all as specified and as directed.

M&L for PCC (1:2:4) type B0 (using 12.5mm graded stone aggregates) as in coping etc complete all as specified and as directed.

M&L for brickwork with fly ash bricks, straight or curved on plan exc 6m mean radius, built in CM (1:4) complete all as specified and as directed.

M&L for 15mm thick rendering in CM (1:3) mixed with water proofing compound etc complete all as specified and as directed. Note:- WPC shall be measured & paid separately.

Supply only integral water proofing compound complete all as specified and as directed.

M&L for chrome finish stainless steel (SS 304 Gde), rounded handrail in straight length with top and bottom newel posts and balusters (fancy type) to be fixed in concrete stair case inclusive of welding, brazing, buffing, grouting in staircase etc and complete all as specified and directed.

S&F glass panes 5.5mm thick of required size & shape including embossing of logo on glass etc. complete all as specified and as directed. Note:- Logo and design shall be approved by the GE.

M&L for outdoor type round table of 600mm dia & 760mm height made of 25mm thick red alabaster stone mounted on solid round/ 'X' shaped red alabaster stone pedestal complete all as specified and as directed. Note:- Sample shall be got approved by the GE.

S&F TMT mild steel bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing etc complete all as specified and as directed.

M&L for fair cutting straight or raking exc 10cm width or girth on exposed surfaces of brickwork as to fire place apertures, splayed angles, weathering, cornices, groins, etc. including rubbed finish and waste complete all as specified and as directed.

M&L for providing precast cement concrete (1:2:4) type B1 (using 20mm graded stone aggregates) as in window or door cills, lintels, bressumers, steps, quoin blocks (for use with masonry), string courses, copings, kneelers, apex stones, pier caps, columns, posts, boundary pillars, bed plates, pintle blocks, anchorage blocks, bonders (for stone walling), corbels, brackets, etc. (of any section indicated), with plain fair faces, including chamfers, weatherings, throating etc. and setting in cement mortar (1:4) complete with joints to match complete all as specified and as directed.

S&F stainless steel Alphabets chrome finished having width of each alphabet 20 to 30 cm and to be fixed in wall including all accessories including suitable fasteners complete all as specified and as directed.

Returning, filling in including spreading, leveling, watering and well ramming in layers not exceeding 25 cm thick complete all as specified and as directed.

Removing excavated material (soil) to a distance not exceeding 50 mtr and depositing where directed at a level not exceeding 1.5 mtr above the starting point complete all as specified and as directed.

S&F steel rolling shutters (1.25mm thick laths), without ball bearing, as specified including top cover, anchoring rod, hasp and staple and one shop coat of primer; erected in position as indicated, gear operated type with chain wheel and hand as in automatic open / close etc complete and all as specified and directed.

S&F Safety lever locks mild steel with 4 levers for rolling shutters complete all as specified and as directed.

S&F ball bearing for rolling shutters complete all as specified and as directed.

M&L for applying SmartCare Damp Proof Ultra fibre reinforced elastomeric liquid applied water proofing membrane as in roof treatment @ 1 Litre per 10 Sq.ft inclusive of all three coats as per following application process: - (a) Prepare the surface by cleaning with high pressure water jet / wire brushes to ensure that it is free of dust, oil, grease, grime and loose particles. (b) Damaged portion if any to be repaired before application of roof treatment as per manufacturer's instructions. (c) Applying self priming coat of SmartCare Damp Proof Ultra duly diluted with water in 3:1 ratio by volume. Allow the primed surface to dry for at least 3-4 hours prior to application of subsequent coat. (d) Applying 2 perpendicular coats of SmartCare Damp Proof Ultra without any dilution to achieve a forced system coverage. Allow it to dry for at least 4-6 hours between two coats. NOTE: - WORK SHALL BE CARRIED OUT BY THE AUTHORIZED APPLICATORS OF THE MANUFACTURER IN CLOSE SUPERVISION OF EXECUTIVE STAFF UP TO ENGINEER-IN-CHARGE LEVEL. MAKE- ASIAN PAINTS or equivalent in STP LTD/ Fosroc.

S&F outdoor type gazebo of size 10'x10' with frame work made of square/ round MS tubes of size 76mm x 2.5mm thick for columns, 60mm x 2.5mm thick for supporting structure & 50mm x 2.5mm for frame work for bench on three sides with provision for fixing cushions complete covered with tensile fabric of 760gsm on top and two sides (with retractor arrangement) including painting the steel surfaces with two coats of Deco paint over a coat of zinc chrome primer all as directed. Note: Make & Model shall be got approved by the GE.

S&F outdoor type gazebo of size 15'x15' with frame work made of square/ round MS tubes of size 100mm x 3mm thick for columns, 76mm x 2.5mm thick for supporting structure & 50mm x 2.5mm for frame work for bench on three sides with provision for fixing cushions complete covered with tensile fabric of 760gsm on top and two sides (with retractor arrangement) including painting the steel surfaces with two coats of Deco paint over a coat of zinc chrome primer all as directed. Note: Make & Model shall be got approved by the GE.

Supply and installing split type units of rated capacity 1.5 TR, high EER rotary compressor, 230 volts AC supply, copper condenser coil with cordless remote control unit hot and cold (all weather), operating ambient temp 0° to 46° centigrade, auto start, anti fungal complete all as specified and as directed. Make : Voltas, Model No- 18H SZS or equivalent model in Blue Star/Carrier Note- Power cable between indoor and outdoor unit, copper piping and drain pipe shall be deemed to be included in quoted rate of this item.

Supply and fixing Voltage stabilizer for automatic operation single phase naturally air cooled, indoor, copper wound, wall mount designed for input variation between 90 V to 250 V with output voltage stabilized at 230 V with accuracy +/- 2.5% of capacity 5 KVA complete all as specified and as directed. Make : Microtech, Sinetrac/V Guard.

Supply and fixing wall/floor mounting type MS powder coated stand for outdoor unit as per manufacturer's recommendation complete all as specified and as directed.

M&L for sub main wiring with two run of single core PVC insulated unsheathed multi stranded copper conductor FRLS cable of size 4 Sq.mm 1100 Volts grade and one run of PVC insulated unsheathed stranded copper conductor FRLS cable of size 4 Sq.mm 100 Volts grade as earth continuity conductor drawn through in and including rigid non metallic PVC casing capping on roof/ wall/ ceiling including making good the disturbed surfaces of wall etc including complete all as directed. (Note :- Two run of single core cable 4 Sq.mm and one run of earth wire 4 Sq.mm shall be measured as one length and conduit and its accessories is deemed to be included in the unit rate). Make :- Finolex, Havells, RR Kabel.

S&F for flush mounting factory made SPN DBs Double door, IP-43 protection - IK 09 with metal door with neutral bus bar, earth bar cables ties for cable management fully insulated bus bar 4 Way etc complete all as specified and as directed. Make :- Legrand/ Siemens/ Schneider.

Supply and fixing MCB single pole and neutral enclosure with a two pin and earth plug and socket complete with and including one MCB single pole 20 amps, 240 volts and sheet metal enclosure complete all as specified and as directed. Make :- Legrand/ Siemens/ Schneider.

S&F MCB single pole and neutral, 240 Volts, 40 Amp to 63 Amps, breaking capacity 10 kA, 'C' series etc complete all specified and as directed. Make :- Legrand/ Siemens/ Schneider

S&F MCB single pole, 240 Volts, 5 to 32 Amps, breaking capacity, 10 KA, 'C' series etc complete all specified and directed. Make :- Legrand/ Siemens/ Schneider

Supply, laying & testing XLPE insulated underground cable, armoured, heavy duty electric cable with aluminium conductor, 1100 volts grade, cross sectional area 16 Sq.mm 2 core complete all as specified and as directed. Note:- Excavation, earthwork and protection of cable shall be measured and paid separately.

M&L for point wiring for one light or fan point controlled by one no, one way switch complete with FRLS multi- stranded copper conductor 2 x 1.5 Sq.mm size PVC insulated unsheathed cable 1100 Volt grade, conforming to IS-694 & colour code in conduit system of wiring, drawn into concealed rigid non metallic PVC conduit medium grade not less than 20mm dia ISI marked ivory colour with all conduit fittings/ fixing accessories and including factory make pressed steel terminal boxes having wall thickness not less than 1.63 mm, concealed in wall duly painted with two coat of black bituminous paint over a coat of red oxide primer and top cover 3mm thick plastic laminated sheet fixed with brass screw and washer with all accessories including single core stranded conductor copper 1.5 Sq.mm size stranded PVC insulated unsheathed cable as earth wire to common earth and connected to earth dolly drawn in same conduit and making good disturbed surface complete all as specified and as directed.

Description all as per srl item No. 57 here in before but for one 3 pin socket outlet 5 amps on independent board complete all as specified and as directed.

Supply and fixing switch socket combination 3 pin, 5 amps, complete all as specified and as directed.

S&F ceiling fan 1200 mm sweep, AC single phase 230/240 volts, AC, 50 Hz off white colour of BEE, 4/5 star rating (ISI mark) complete with down rod of suitable length, mounting clamps, rubber sheet, nuts, bolts, washers including provision of twin twisted flexible copper cable 23/0.0076" from ceiling rose to connector block of ceiling fan complete along with fixing arrangements such as hooks, grouting, cement works, fasteners, clamps, nuts, bolts & washer etc complete all as specified and as directed. Make:- Orient Model Orient Quasar Ceiling Fan Premium Series, Usha Model Usha Striker Galaxy 3 Blade Ceiling Fan, Havells Model Havells Fusion Five Star 3 Blade Ceiling Fan.

Supply and fixing LED luminaire square 12 Watt, 220 volts AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete all as specified and as directed. Make:- CG Model No- LSCSM-12 W-CDL/NW/WW or equivalent in make Wipro/ Osram.

Supply and fixing switch piano flush type single pole one way 5/6 Amp complete all as specified and as directed.

S&F MCB single pole and neutral, 240 Volts, 6 to 32 Amps, breaking capacity 10 KA, 'C' series etc complete all specified and directed. Make :- Legrand/ Siemens/ Schneider

Supply, installation, commissioning and testing of dehumidifier unit, main body made of metallic sheet duly powder coated, comprising built -in compressor of suitable capacity, special purpose fan motor high saving efficient system of minimum capacity of 30 litres per day (30 degree C, 80%), dehumidifying capacity of minimum 1.25 Kg per hrs, electric operated 220-240 volts, 50 Hz having power consumption of 390 Watt rotary compressor based type using CFC free refrigerant R134a, drain pipe arrangement towards outside internally fixture to remove the water outside the dehumidifying room, multiple functional wheels, automatic diffuser system, delay timer for compressor complete in all respect as required at site and as directed by Engr-in-Charge complete all as specified and as directed. MAKE/ Model No ADPC300 of ADVANCE INTERNATIONAL or having same or superior specification in GMP DUEX INDUSTRIAL SYSTEM / HARRISONS PHARMA MACHINERY PVT LTD / ALISHA PNEUMATICS PVT LTD or as approved by the GE in writing.

Taking down copper /aluminium point wiring (light, fan, socket or power) complete including fixture and fitting such as switches, ceiling roses, pendants, regulators, socket, etc. removing material to store for keeping in safe custody for taking credit (credit of the above items shall be made as per condition separately) and making good disturbed surfaces of walls, floors etc. complete all as specified and as directed.

M&L for dry sand cushioning to underground cables with 8 cm thick before laying of cables and 15 cm thick after laying and stretching of cable complete all a specified and as directed.

M&L for sub class 'B' brick for covering to under ground cable laid dry flat transversally width equal to the length of the cable complete all as specified and as directed.

M&L for horizontal boring under road, pavement, hard standing complete for inserting GI pipe light grade of size 50mm dia complete all as specified and as directed. Note :- GI pipe shall be measured and paid separately.

M&L for 32mm dia of tubes light grade galvanized with all fittings laid in trenches or inserting in horizontal boring complete all as specified and as directed.

Zaigham Enterprises

MOHINDER SINGH AND SONS