PROVIDING & FIXING KOTA STONE/PAVER BLOCK FOOTPATH / STREETS , WATER TABLE, PCC ,GAURD STONE AND REPAIRING OF BRTS RAILING AT VARIOUS PLACES IN PAL DEPOT AREA OF WEST ZONE (RANDER) (3RD ATTEMPT).

NAME OF WORK : PROVIDING & FIXING KOTA STONE/PAVER BLOCK FOOTPATH / STREETS , WATER TABLE, PCC

,GAURD STONE AND REPAIRING OF BRTS RAILING AT VARIOUS PLACES IN PAL DEPOT AREA OF WEST ZONE

(RANDER) (3RD ATTEMPT).

ITEM Rs. AMOUNT

DESCRIPTION QUANTITY UNIT

NO. (Without GST Rs.

1 Excavation the road surface upto required depth including

removing the excavated materials and depositing on the

road side upto 50 mt. Lead etc. complete and as directed by

engineer in charge.

2 Dismantling of structures on roadways, including disposal of

unserviceable material free of cost in permanent work as

directed by the engineer with all leads and lifts etc.

A) Unreinforced Cement Concrete (P.C.C.) 20.00 C.M. 609.26

(B) Bituminous Pavement 40.00 C.M. 288.65

(C) Non Bituminous Pavement 40.00 C.M. 155.25

(D) Removing existing kotah stone/Paver block 900.00 S.M. 47.72

3 Preparation of subgrade with Compacting, Levelling and

consolidation of subgrade with miniroller /plate vibrator

machine including watering and filling in depressions which 3183.07 S.M. 4.93

occur during the process as directed by engineer in charge.

4 Supplying & filling fine sand(pana) in upto 150 mm

compacted thickness over the base including necessary

compaction, watering etc. complete. Item includes leveling 1200.00 C.M. 413.09

by using vibratory plates compacted machine.

5 Providing & laying cement concrete 1:2:4 (1 part of cement,

2 part of coarse sand, 4 part of graded stone aggregate of

20 mm nominal size) including providing & fixing

reinforsement as specified in drawing with necessary

bending, binding and placing in position and also including

formwork of sheating of steel sheet so as to form exposed

finished surface with necessary centaring, shutteing,

propping etc. complete and as directed by engineer in

(A) R.C.C. kerb 450mm depth and 100mm width 20.00 Rmt. 608.99

(B) R.C.C. kerb 300mm depth and 100mm width. 100.00 Rmt. 437.49

6 Providing & setting 35 to 50 mm thick rough kotah stone

paving for footpath in line, level and in proper gradient

including 25 mm thick bedding in C.M. 1:6 ( 1 part of cement

: 6 part of coarse sand) with sufficient ramming

consolidation. Providing joints in C.M. 1:3 ( 1 part of cement 150.00 S.M. 312.57

:3 part of coarse sand) and smooth pointing in C.M. 1:1 (

part of cement : 1 part of coarse sand) including watering

etc. complete and as directed by Engineer in charge.

7 Providing & setting 50 to 60 mm thick rough kotah stone

water table in line, level and in required gradient including

25 mm thick bedding in 1:6 (1 part of cement : 6 part of

coarse sand) with sufficient ramming consolidation.

Providing joints in C.M. 1:3( 1 part of cement : 3 part of

coarse sand) and smooth pointing in C.M. 1:1 (1 part of

cement : 1 part of coarse sand) including watering etc.

complete and as directed by Engineer in charge.

ITEM Rs. AMOUNT

DESCRIPTION QUANTITY UNIT

NO. (Without GST Rs.

8 Providing & setting 60 to 75 mm thick rough kotha stone

kerb stone ( size 610 mm x 305 mm) in line, level and in truly

vertical position, including joints in C.M. 1:3 ( 1 prt of

cement : 3 part of coarse sand) smooth pointing in C.M. 1:1 25.00 Rmt. 109.59

( 1 part of cement :1 part of coarse sand) including watering

etc. complete and as directed by Engineer in charge

9 Dismantling carefully existing guly trap chamber upto

required depth & raising the same upto new footpath level

with B.B. masonary in C.M. 1:6 (1 part of cement : 6 part of

coarse san) including 12 mm thick cement plaster in C.M. 75.00 No. 493.29

1:3 (1 part of cement : 3 part of coarse sand) and fixing C.I.

cover etc. complete and as directed by engineer in charge.

10 Dismantling carefully existing Sewer trap chamber upto

required depth & raising the same upto new footpath level

with B.B. masonary in C.M. 1:6 ( 1 part of cement : 6 part of

coarse sand) including 12 mm thick cement plaster in C.M. 75.00 No. 659.87

1:3 ( 1 part of cement : 3 part of coarse sand) and fixing C.I.

cover etc. complete and as directed by Engineer in charge.

11 Removing & resetting rough kotah stone paving for footpath

in line, level and in proper gradient including 25 mm thick

bedding in C.M. 1:6 ( 1 part of cement : 6 part of coarse

sand) with sufficient ramming consolidation. Providing joints

in C.M. 1:3 ( 1 partof cement : 3 part of coarse sand) and 700.00 S.M. 155.51

smooth pointing in C.M. 1:1 (1 part of cement : 1 part of

coarse sand) including watering etc. complete and as

directed by Engineer in charge

12 Removing & resetting rough kotah stone water table for

footpath in line, level and in required gradient including

mm thick bedding in 1:6 ( 1 part of cement : 6 part of coarse

sand) with sufficient ramming consolidation, providing joints

in C.M. 1:3 ( 1 part of cement : 3 part of coarse sand) and 700.00 Rmt. 61.94

smooth pointing in C.M. 1:1 ( 1 part of cement : 1 part of

coarse sand) including watering etc. complete and as

directed by Engineer in charge.

13 Removing resetting existing rough kotah stone kerb stone or

in required size & thickness in line, level and in truly vertical

position, including joints in C.M. 1:3 ( 1 prt of cement :

part of coarse sand) smooth pointing in C.M. 1:1 ( 1 part of 100.00 Rmt. 48.66

cement : 1 part of coarse sand) including watering etc.

complete and as directed by Engineer in charge.

14 Providing and laying cement concrete 1:5:10 ( 1 Part of

cement, 5 Part of coarse sand, 10 Part of graded stone

aggregate of 40mm nominal size) in 75mm thick and curing 504.00 C.M. 2517.44

completed including cost of form work etc. complete.

15 Providing 100mm thick readymade c.c. kerb of strength M-

20 (size 300mm x 380mm) purchased from SMC's approved

paverblock manufacturer & setting in line, level and in truly

vertical position, including filling joints in C.M. 1:1 (1 part of

cement : 1 part of stone dust) smooth pointing in C.M. 1:1

(1 part of cement : 1 part of coarse sand) including watering

etc. complete and as directed by engineer in charge.

For rounding at the edge of footpath (For fanning portion) 50.00 RMT 274.00

ITEM Rs. AMOUNT

DESCRIPTION QUANTITY UNIT

NO. (Without GST Rs.

16 Providing interlocking type Rubber moulded cement

concrete paver block of approved shape, design & colour

having 60mm thickness (M-35) purchased from SMC's

approved paverblock manufacturer only & fixing of fine

sand bedding. Item includes levelling by using vibratory

plates compacted machine. Item also includes all materials,

labour, equipments, tools, plants, watering, cleaning etc.

(With colour) 400.00 Smt. 524.00

Without colour 1000.00 Smt. 524.00

17 Providing & fixing interlocking type cement concrete paver

block of approved shape & design having 60 mm thickness

(M-40) purchased from SMC's approved paverblock

manufacturer only on fine sand bedding. Item includes

leveling by using vibratory plates compacted machine. Item

also includes all materials, Labour, euipments, tools, plants,

watering, cleaning etc. complete.

For Road Junction 80 mm thick ( M-50) 400.00 Smt. 714.00

18 Providing and laying PLAIN CEMENT CONCERETE M-200-

(1:1.5:3) (1 cement, 1.5 coarse sand, 3 stone Aggregate of

20mm nominal size) for raising / lowering the existing

manhole cover (with frame) of drainage water supply, sewer

trap chamber, Gas chamber, scrapper manhole frame & 25.00 No. 583.55

cover and/or chambers of any utility services upto the newly

carpeted / re-carpeted road surface including in C.M. 1:3 on

both side etc. complete.

19 Removing & Refixing interlocking type cement concrete

paver block (Rubber moulded) of approved shape, design &

colour fixing on fine sand bedding. Item includes levelling by

using vibratory plates compacted machine. Item also 4500.00 Smt. 102.00

includes all materials, labour, equipments, tools, plants,

watering, cleaning etc. complete.

20 Providing & laying cement concrete 1:2:4 (1 cement:2

sand:4 graded stone agg. 20 mm nominal size)& curing

comp. Includ.cost of form work but exclu. Cost of 30.00 C.M. 3637.34

reinforcement for reinforced concrete work in : (A)

Foundation, footing, Base of columns and Mass concrete.

21 Removing & Reseting existing readymade C.C. kerb stone 400.00 R.mt. 56.00

22 Painting two coats of enamel paint (Excluding priming coat)

over previously painted wall with even shade & surface after

removing dirt, dust foreign matter etc. complete.

23 Providing & fixing M.S.Grills of required pattern to as

directed by Engineer Incharge. At all floor levels with M.S.

flats at required spacing & frame around,square or round

bars with round headed bolts & round headed bolts and 900.00 Kg 104.20

nuts or by screws or as per directed by Engineer incharge or

Drawing atteched incl. Priming coat of Red lead paint etc.

ITEM Rs. AMOUNT

DESCRIPTION QUANTITY UNIT

NO. (Without GST Rs.

24 Fabricating and fixing in position MS railing using structural

steel TATA/JINDAL/ Asian sections of YST 310 grade using

hollow box sections, plates, angles, tees, pipes, MS square

polished bars as per drawing. The rates shall include all

kinds of welding, nut bolting, anchor bolting and grouting

the bolts using non-shrink cementitious grouts of Sika or

Fosroc make or The contractor shall be responsible in

recting the railing assembly in the desired line, level and

alignment. The railing shall be firmly fixed to the foundation

concrete blocks and shall be in place once fixed. The rates

excluding excavation and foundation concrete and including

for marking of foundation pits, placing the same in

alignment of the road as directed by the Engineer in charge

and or as per drawing with Priming coat of Red lead paint

25 Providing & applying painting two coats at all levels on new

steel other metal surface with synthetic enemal paint,

brushing interior to give an even shade incl. cleaning the

surface of all dirt, dust & other foreign matter etc. Comp.

(A) For plain grill/ Railling For all Floor

26 Providing and laying cement concrete guardstone in

proportion 1:1:5:3 (1 Cement : 1.5 Coarse Sand : 3 Graded

Stone Aggregate 20 mm nominal size) size and shape as per

the drawing including necessary excavation steel form work

and white Washing etc. complete (Cement and Steel

contractor own supply).

27 Providing and laying cement concrete guardstone in

proportion 1:2:4 (1 Cement : 2 Coarse Sand : 4 Graded Stone

Aggregate 20 mm nominal size) size and shape as per the

drawing including necessary excavation steel form work and

white Washing etc. complete (Cement and Steel contractor

28 Providing & laying ordinary cement

con.1:1.5:3(1cement:1.5sand:3 graded

graded stone agg. 20 mm nominal size) finishing smooth

curing etc. comp.

Incl.. Cost of form work but excl. Cost of reinforcement for

R.C.C. Work in :

(A) Stair cases including landings etc.

Ground Floor 0.00 C.M. 7380.20

First Floor 0.00 C.M. 7419.85

Second Floor 0.00 C.M. 7459.49

Terrace (third) Floor 0.00 C.M. 7499.13

(B) Vertical and horizontal fins

Ground Floor 25.00 C.M. 10831.75

First Floor 0.00 C.M. 10871.40

Second Floor 0.00 C.M. 10911.04

Terrace (third) Floor 0.00 C.M. 10950.68

29 Providing & fixing IS Mark TMT Bar FE 500d reinforcement

for R.C.C. work

incl. bending, binding & placing in position etc.comp.---

First Floor 1000.00 KG 77.21

Second Floor 0.00 KG 78.21

Terrace (third) Floor 0.00 KG 79.21

30 Removing and scraping of old deteriorated plaster of any

thickness from wall / RCC member including stacking of

serviceable material and disposal of unserviceable from site

of work with all lead and lift.

ITEM Rs. AMOUNT

DESCRIPTION QUANTITY UNIT

NO. (Without GST Rs.

31 Providing and applying single coat of bonding agent mixed

with cement in 1:1 proportion the bonding agent should be

SBR based having a minimum solid contents of 40 % and the

plaster has to be applied immediately after the application

of the bonding agent. Approved barnds for this are CERA

CHEM / NEROLAC PERMA / SIKA OR EQUIVALANT or appved

by engineering charge.

32 Providing & Applying 15mm.th .cement plaster in single coat

on brick / concrete walls similar surfaces for plastering &

finished even & smooth with a floting coat of cement slurry

mixed with admixture of lime of neeru in required 2500.00 sm 237.51

prooportion etc.comp.C.M 1:3(1 cement :3 sand) (A) For

wall and similar surfaces --Ground Floor

33 Providing & applying two coats of weather shield max paint

(3 coats may be required

in case of darker colours.)of ICI Dulux or Apex Ultima of

Asian Paint including applying

exterior acrylic primer coat as per manufacturers

specification and directions in shade

and colour approved by architects, on exterior surfaces of

the building including

scaffolding, preparing the surface, watering, curing etc.

complete and as directed by the

architects and manufacturers.

Surface Preparation :

surface is thoroughly clean, dry and free from all loose dirt,

chalk, grease, fungi, algae 2500.00 S.M. 82.00

and flaking paint. This can be achieved by brushing with a

wire/ stiff coir brush, followed

by water jetting if required. Fill up all minor cracks and

defects with white cement and

sand mixture in the ratio 1:3. For application on previously

painted wall, previous coatings

of paint must be thoroughly scraped off and Clean the

surface thoroughly using wire

Apply a liberal coat of exterior acrylic primer and allow it to

dry for 4-5 hours. Application

of putty is not recommended.

Minimum 4-6 hours duration is required between each coat

EXECUTIVE ENGINEER

WEST ZONE (RANDER)

Contractor's Sign SURAT MUNICIPAL CORPORATION