Providing 3 Nos. of 20Mtr High Mast Lighting for the Truck Terminal at Baikampady, NMPA

Supply of 20M high mast shaft in two sections suitable for 39 m/sec wind speed, with head frame, winch mounting bracket, luminaries carriage suitable to install 12 nos. luminaries in symmetrical arrangement. As per Technical specification

Supply of raising, lowering system comprising double drum winch, 6mm diameter SS wire rope, trailing cable, connector, integral power tool motor, manual handle, junction box, Lightening finial. As per Technical specification

Supply of foundation bolts manufactured from special steel along with nuts, washers, anchor plate and common template. As per Technical specification

Supply, Installation, testing & commissioning of 5OO W LED Flood light fittings complete with driver and necessary accessories as required to maintain average 25 Lux for keeping minimum uniformity. Bidder to submit illumination design with location of the mast. Housing material of the flood light should be Matt Grey powder coated pressure Die-cast aluminum housing, with heat resistant tempered glass cover. System wattage of the luminaire should be within 500W and system lumen output should not be less than 120 lm/W. And total Luminous flux shall be 60000 lm (+/- 10%). The fixture should be available with choice of beam angles of NB A3 - 25'. Fixture should be suitable for a input voltage range of 120 V to 277 V AC with input power supply of 230V AC. Lifetime should be at least 50,000 burning hours. Ingress protection class of IP 66 and impact resistance of IK 08. Bidder to submit LM 79-80 report of the luminaire from NABL / Govt. approved test house along with BIS certificate as required.

Supply of low intensity LED type single dome aviation obstruction light.

Construction of shallow foundation with M25 grade concrete for the high mast considering the safe soil bearing capacity at site as 10 T/sq mtr at 2 meter depth with all materials and labour.

Erection of the high mast with the help of suitable tools and plants, wiring of luminaires with all wiring materials like PVC insulated PVC sheathed flexible cable of suitable copper conductor cores of 2.5 sq. mm, lugs, MCB and all labor as a complete

Supply of outdoor High Mast control panel made of SS 304 Grade Stainless steel Enclosure of size 600(W) X760(H) X210(D) mm with rain canopy, single door type with cam lock door sealing gasket and gland plate with required openings etc. Material 2.0omm thick and mounting plate 2.5mm thick comprising the following components with control wiring 10 Sq.mm copper wire for lighting circuit and 2.5 Sq. mrn copper wire for motor circuit and termination with suitable lugs. work including supply & 'fixing of the components complete etc. as per technical specifications. 1. 1 no 63A,4P,25KA MCCB 2. 3 nos 32A, SP MCB for High Mast control 3. 3 nos 32A, SP, MCB for Motor Control 4. 4 nos, 1OOA, CBT connectors-4nos 5. 16Amps Connectors - 4 nos. 6. 16Amps Connectors - 4 nos. 7. I no MNX 45, 3P, contactor with add on block. 8. 1 no 24Hrs timer 9. 1 no Auto manual selector switch to by-pass timer 10. forward and reverse Contactor with push button control to raise/lower the lantern carriage for fixed 3 phase, 415V winch Electric Motor of suitable rating as per the recommendations of manufacturer.

Design & construction of RCC barricade wall around the high mast by using M 20 concrete with 10 mm vertical rod at a gap of 200 mm double layer and 3 rows of B mm horizontal rod by keeping 2000 mm inner radius from center of high mast foundation as per the specifications.

Providing RCC/Stone masonry foundation for the High Mast control Panel and the dimension of the foundation is 800(W) x 1000(H) x 400(D) mm and gap between the pillars is 350 mm for cable connection to the control panel. The foundation starts 30Omm below the ground after making 100mm stone soling and height of the foundation 5OOmm above the high Mast foundation level and curing etc. and the panel should be stand on the four Stainless steel bolts (12mm x 6")and :ach bolt with four nuts & washers at 50mm height from the foundation and complete.